From: Chris Brandt <chris.brandt@renesas.com> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Simon Horman <horms@verge.net.au>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org>, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Chris Subject: [PATCH v2 15/15] ARM: dts: rza2mevb: Add USB host support Date: Thu, 9 May 2019 15:11:42 -0500 [thread overview] Message-ID: <20190509201142.10543-16-chris.brandt@renesas.com> (raw) In-Reply-To: <20190509201142.10543-1-chris.brandt@renesas.com> Enable USB Host support for both the Type-C connector on the CPU board and the Type-A plug on the sub board. Both boards are also capable of USB Device operation as well after the appropriate Device Tree modifications. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> --- v2: * added blank line between nodes * removed 'r7s9210-' from patch title * removed 'renesas,uses_usb_x1' property --- arch/arm/boot/dts/r7s9210-rza2mevb.dts | 37 ++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts index 7da409170db5..c0a4484a0bde 100644 --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts @@ -107,6 +107,18 @@ pinmux = <RZA2_PINMUX(PORT5, 4, 3)>, /* SD1_CD */ <RZA2_PINMUX(PORT5, 5, 3)>; /* SD1_WP */ }; + + usb0_pins: usb0 { + pinmux = <RZA2_PINMUX(PORT5, 2, 3)>, /* VBUSIN0 */ + <RZA2_PINMUX(PORTC, 6, 1)>, /* VBUSEN0 */ + <RZA2_PINMUX(PORTC, 7, 1)>; /* OVRCUR0 */ + }; + + usb1_pins: usb1 { + pinmux = <RZA2_PINMUX(PORTC, 0, 1)>, /* VBUSIN1 */ + <RZA2_PINMUX(PORTC, 5, 1)>, /* VBUSEN1 */ + <RZA2_PINMUX(PORT7, 5, 5)>; /* OVRCUR1 */ + }; }; /* High resolution System tick timers */ @@ -161,3 +173,28 @@ bus-width = <4>; status = "okay"; }; + +/* USB-0 as Host */ +/* NOTE: Requires JP3 to be fitted */ +&usb2_phy0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + dr_mode = "host"; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +/* USB-1 as Host */ +&usb2_phy1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + dr_mode = "host"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; -- 2.16.1
WARNING: multiple messages have this Message-ID (diff)
From: Chris Brandt <chris.brandt@renesas.com> To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Simon Horman <horms@verge.net.au>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org>, Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>, <linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-renesas-soc@vger.kernel.org>, "Chris Brandt" <chris.brandt@renesas.com> Subject: [PATCH v2 15/15] ARM: dts: rza2mevb: Add USB host support Date: Thu, 9 May 2019 15:11:42 -0500 [thread overview] Message-ID: <20190509201142.10543-16-chris.brandt@renesas.com> (raw) In-Reply-To: <20190509201142.10543-1-chris.brandt@renesas.com> Enable USB Host support for both the Type-C connector on the CPU board and the Type-A plug on the sub board. Both boards are also capable of USB Device operation as well after the appropriate Device Tree modifications. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> --- v2: * added blank line between nodes * removed 'r7s9210-' from patch title * removed 'renesas,uses_usb_x1' property --- arch/arm/boot/dts/r7s9210-rza2mevb.dts | 37 ++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts index 7da409170db5..c0a4484a0bde 100644 --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts @@ -107,6 +107,18 @@ pinmux = <RZA2_PINMUX(PORT5, 4, 3)>, /* SD1_CD */ <RZA2_PINMUX(PORT5, 5, 3)>; /* SD1_WP */ }; + + usb0_pins: usb0 { + pinmux = <RZA2_PINMUX(PORT5, 2, 3)>, /* VBUSIN0 */ + <RZA2_PINMUX(PORTC, 6, 1)>, /* VBUSEN0 */ + <RZA2_PINMUX(PORTC, 7, 1)>; /* OVRCUR0 */ + }; + + usb1_pins: usb1 { + pinmux = <RZA2_PINMUX(PORTC, 0, 1)>, /* VBUSIN1 */ + <RZA2_PINMUX(PORTC, 5, 1)>, /* VBUSEN1 */ + <RZA2_PINMUX(PORT7, 5, 5)>; /* OVRCUR1 */ + }; }; /* High resolution System tick timers */ @@ -161,3 +173,28 @@ bus-width = <4>; status = "okay"; }; + +/* USB-0 as Host */ +/* NOTE: Requires JP3 to be fitted */ +&usb2_phy0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + dr_mode = "host"; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +/* USB-1 as Host */ +&usb2_phy1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + dr_mode = "host"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; -- 2.16.1
next prev parent reply other threads:[~2019-05-09 20:11 UTC|newest] Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-05-09 20:11 [PATCH v2 00/15] usb: Add host and device support for RZ/A2 Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-09 20:11 ` [PATCH v2 01/15] ARM: dts: r7s9210: Add USB clock Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-13 12:25 ` Simon Horman 2019-05-09 20:11 ` [PATCH v2 02/15] ARM: dts: rza2mevb: Add 48MHz " Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-13 12:26 ` Simon Horman 2019-05-09 20:11 ` [PATCH v2 03/15] phy: renesas: rcar-gen3-usb2: detect usb_x1 clock Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-10 1:57 ` Chunfeng Yun 2019-05-10 1:57 ` Chunfeng Yun 2019-05-10 13:17 ` Chris Brandt 2019-05-10 13:17 ` Chris Brandt 2019-05-10 4:17 ` Yoshihiro Shimoda 2019-05-10 4:17 ` Yoshihiro Shimoda 2019-05-10 6:56 ` Geert Uytterhoeven 2019-05-10 6:56 ` Geert Uytterhoeven 2019-05-09 20:11 ` [PATCH v2 04/15] dt-bindings: rcar-gen3-phy-usb2: Document use of usb_x1 Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-10 4:38 ` Yoshihiro Shimoda 2019-05-10 4:38 ` Yoshihiro Shimoda 2019-05-10 6:55 ` Geert Uytterhoeven 2019-05-10 6:55 ` Geert Uytterhoeven 2019-05-13 21:07 ` Chris Brandt 2019-05-13 21:07 ` Chris Brandt 2019-05-13 21:12 ` Geert Uytterhoeven 2019-05-13 21:12 ` Geert Uytterhoeven 2019-05-13 21:24 ` Chris Brandt 2019-05-13 21:24 ` Chris Brandt 2019-05-09 20:11 ` [PATCH v2 05/15] phy: renesas: rcar-gen3-usb2: Check dr_mode when not using OTG Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-10 8:36 ` Sergei Shtylyov 2019-05-10 13:55 ` Chris Brandt 2019-05-10 13:55 ` Chris Brandt 2019-05-11 7:39 ` Sergei Shtylyov 2019-05-11 7:39 ` Sergei Shtylyov 2019-05-11 12:05 ` Chris Brandt 2019-05-11 12:05 ` Chris Brandt 2019-05-09 20:11 ` [PATCH v2 06/15] dt-bindings: rcar-gen3-phy-usb2: Document dr_mode Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-09 20:11 ` [PATCH v2 07/15] dt-bindings: rcar-gen3-phy-usb2: Add r7s9210 support Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-09 20:11 ` [PATCH v2 08/15] usb: renesas_usbhs: move flags macros Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-10 1:59 ` Chunfeng Yun 2019-05-10 1:59 ` Chunfeng Yun 2019-05-10 8:41 ` Sergei Shtylyov 2019-05-10 14:00 ` Chris Brandt 2019-05-10 14:00 ` Chris Brandt 2019-05-09 20:11 ` [PATCH v2 09/15] usb: renesas_usbhs: add support for CNEN bit Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-09 20:11 ` [PATCH v2 10/15] usb: renesas_usbhs: support byte addressable CFIFO Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-09 20:11 ` [PATCH v2 11/15] usb: renesas_usbhs: Add support for RZ/A2 Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-10 1:53 ` Chunfeng Yun 2019-05-10 1:53 ` Chunfeng Yun 2019-05-10 13:10 ` Chris Brandt 2019-05-10 13:10 ` Chris Brandt 2019-05-10 7:07 ` Geert Uytterhoeven 2019-05-10 7:07 ` Geert Uytterhoeven 2019-05-10 8:16 ` Yoshihiro Shimoda 2019-05-10 11:00 ` Yoshihiro Shimoda 2019-05-10 14:20 ` Chris Brandt 2019-05-09 20:11 ` [PATCH v2 12/15] dt-bindings: usb: renesas_usbhs: Add support for r7s9210 Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-09 20:11 ` [PATCH v2 13/15] ARM: dts: r7s9210: Add USB Host support Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-09 20:11 ` [PATCH v2 14/15] ARM: dts: r7s9210: Add USB Device support Chris Brandt 2019-05-09 20:11 ` Chris Brandt 2019-05-09 20:11 ` Chris Brandt [this message] 2019-05-09 20:11 ` [PATCH v2 15/15] ARM: dts: rza2mevb: Add USB host support Chris Brandt
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190509201142.10543-16-chris.brandt@renesas.com \ --to=chris.brandt@renesas.com \ --cc=devicetree@vger.kernel.org \ --cc=geert@linux-m68k.org \ --cc=gregkh@linuxfoundation.org \ --cc=horms@verge.net.au \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=sergei.shtylyov@cogentembedded.com \ --cc=yoshihiro.shimoda.uh@renesas.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.