From: Jonathan Cameron <jic23@kernel.org>
To: Beniamin Bia <beniamin.bia@analog.com>
Cc: <lars@metafoo.de>, <Michael.Hennerich@analog.com>,
<knaack.h@gmx.de>, <pmeerw@pmeerw.net>,
<gregkh@linuxfoundation.org>, <linux-iio@vger.kernel.org>,
<devel@driverdev.osuosl.org>, <linux-kernel@vger.kernel.org>,
<mark.rutland@arm.com>, <robh+dt@kernel.org>,
<devicetree@vger.kernel.org>, <biabeniamin@outlook.com>
Subject: Re: [PATCH v2 3/4] iio: adc: ad7606: Add support for software mode for ad7616
Date: Sat, 8 Jun 2019 12:30:39 +0100 [thread overview]
Message-ID: <20190608123039.31e691bd@archlinux> (raw)
In-Reply-To: <20190527125650.2405-3-beniamin.bia@analog.com>
On Mon, 27 May 2019 15:56:49 +0300
Beniamin Bia <beniamin.bia@analog.com> wrote:
> Support for ad7616 running in software was added. In order
> to activate the software mode, HW_RNGSEL pins must be pulled low.
> Oversampling and input ranges are now configured in corresponding
> registers. Ad7616 has multiple scale options when it is configured
> in software mode.
> Also, in order to support multiple devices in software mode, the spi
> the calculation of registers address must be generic. Because
> the length of address and bit which specifies the read/write operation is
> different for every device, calculation of address was made generic.
>
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Applied to the togreg branch of iio.git and pushed out as testing
to see if the autobuilders can find anything we have missed.
Thanks,
Jonathan
> ---
> Changes in v2:
> -squashed with the patch which introduces the reg access function.
> -some casting warnings were fixed.
>
> drivers/iio/adc/ad7606.c | 171 +++++++++++++++++++++++++++++++++++++--
> drivers/iio/adc/ad7606.h | 4 +
> 2 files changed, 167 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
> index aba0fd123a51..8e09ad4bb72e 100644
> --- a/drivers/iio/adc/ad7606.c
> +++ b/drivers/iio/adc/ad7606.c
> @@ -25,8 +25,24 @@
> #include <linux/iio/triggered_buffer.h>
> #include <linux/iio/trigger_consumer.h>
>
> +#include <linux/spi/spi.h>
> +
> #include "ad7606.h"
>
> +#define AD7606_RANGE_CH_ADDR(ch) (0x03 + ((ch) >> 1))
> +#define AD7606_OS_MODE 0x08
> +
> +#define AD7616_CONFIGURATION_REGISTER 0x02
> +#define AD7616_OS_MASK GENMASK(4, 2)
> +#define AD7616_BURST_MODE BIT(6)
> +#define AD7616_SEQEN_MODE BIT(5)
> +#define AD7616_RANGE_CH_ADDR_OFF 0x04
> +#define AD7616_RANGE_CH_ADDR(ch) ((((ch) & 0x1) << 1) + ((ch) >> 3))
> +#define AD7616_RANGE_CH_MSK(ch) (GENMASK(1, 0) << ((ch) & 0x6))
> +#define AD7616_RANGE_CH_MODE(ch, mode) ((mode) << (ch & GENMASK(2, 1)))
> +
> +static int ad7616_sw_mode_config(struct iio_dev *indio_dev);
> +
> /*
> * Scales are computed as 5000/32768 and 10000/32768 respectively,
> * so that when applied to the raw values they provide mV values
> @@ -35,6 +51,11 @@ static const unsigned int ad7606_scale_avail[2] = {
> 152588, 305176
> };
>
> +
> +static const unsigned int ad7616_sw_scale_avail[3] = {
> + 76293, 152588, 305176
> +};
> +
> static const unsigned int ad7606_oversampling_avail[7] = {
> 1, 2, 4, 8, 16, 32, 64,
> };
> @@ -43,6 +64,11 @@ static const unsigned int ad7616_oversampling_avail[8] = {
> 1, 2, 4, 8, 16, 32, 64, 128,
> };
>
> +static u16 ad7616_spi_rd_wr_cmd(int addr, char isWriteOp)
> +{
> + return ((addr & 0x7F) << 1) | ((isWriteOp & 0x1) << 7);
> +}
> +
> static int ad7606_reset(struct ad7606_state *st)
> {
> if (st->gpio_reset) {
> @@ -55,6 +81,59 @@ static int ad7606_reset(struct ad7606_state *st)
> return -ENODEV;
> }
>
> +static int ad7606_spi_reg_read(struct ad7606_state *st, unsigned int addr)
> +{
> + struct spi_device *spi = to_spi_device(st->dev);
> + struct spi_transfer t[] = {
> + {
> + .tx_buf = &st->d16[0],
> + .len = 2,
> + .cs_change = 0,
> + }, {
> + .rx_buf = &st->d16[1],
> + .len = 2,
> + },
> + };
> + int ret;
> +
> + st->d16[0] = cpu_to_be16(st->chip_info->spi_rd_wr_cmd(addr, 0) << 8);
> +
> + ret = spi_sync_transfer(spi, t, ARRAY_SIZE(t));
> + if (ret < 0)
> + return ret;
> +
> + return be16_to_cpu(st->d16[1]);
> +}
> +
> +static int ad7606_spi_reg_write(struct ad7606_state *st,
> + unsigned int addr,
> + unsigned int val)
> +{
> + struct spi_device *spi = to_spi_device(st->dev);
> +
> + st->d16[0] = cpu_to_be16((st->chip_info->spi_rd_wr_cmd(addr, 1) << 8) |
> + (val & 0x1FF));
> +
> + return spi_write(spi, &st->d16[0], sizeof(st->d16[0]));
> +}
> +
> +static int ad7606_spi_write_mask(struct ad7606_state *st,
> + unsigned int addr,
> + unsigned long mask,
> + unsigned int val)
> +{
> + int readval;
> +
> + readval = ad7606_spi_reg_read(st, addr);
> + if (readval < 0)
> + return readval;
> +
> + readval &= ~mask;
> + readval |= val;
> +
> + return ad7606_spi_reg_write(st, addr, readval);
> +}
> +
> static int ad7606_read_samples(struct ad7606_state *st)
> {
> unsigned int num = st->chip_info->num_channels;
> @@ -222,6 +301,26 @@ static int ad7606_write_os_hw(struct iio_dev *indio_dev, int val)
> return 0;
> }
>
> +static int ad7616_write_scale_sw(struct iio_dev *indio_dev, int ch, int val)
> +{
> + struct ad7606_state *st = iio_priv(indio_dev);
> + unsigned int ch_addr, mode;
> +
> + ch_addr = AD7616_RANGE_CH_ADDR_OFF + AD7616_RANGE_CH_ADDR(ch);
> + mode = AD7616_RANGE_CH_MODE(ch, ((val + 1) & 0x3));
> +
> + return ad7606_spi_write_mask(st, ch_addr, AD7616_RANGE_CH_MSK(ch),
> + mode);
> +}
> +
> +static int ad7616_write_os_sw(struct iio_dev *indio_dev, int val)
> +{
> + struct ad7606_state *st = iio_priv(indio_dev);
> +
> + return ad7606_spi_write_mask(st, AD7616_CONFIGURATION_REGISTER,
> + AD7616_OS_MASK, val << 2);
> +}
> +
> static int ad7606_write_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> int val,
> @@ -308,14 +407,14 @@ static const struct attribute_group ad7606_attribute_group_range = {
> .attrs = ad7606_attributes_range,
> };
>
> -#define AD760X_CHANNEL(num, mask) { \
> +#define AD760X_CHANNEL(num, mask_sep, mask_type, mask_all) { \
> .type = IIO_VOLTAGE, \
> .indexed = 1, \
> .channel = num, \
> .address = num, \
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
> - .info_mask_shared_by_all = mask, \
> + .info_mask_separate = mask_sep, \
> + .info_mask_shared_by_type = mask_type, \
> + .info_mask_shared_by_all = mask_all, \
> .scan_index = num, \
> .scan_type = { \
> .sign = 's', \
> @@ -325,11 +424,18 @@ static const struct attribute_group ad7606_attribute_group_range = {
> }, \
> }
>
> -#define AD7605_CHANNEL(num) \
> - AD760X_CHANNEL(num, 0)
> +#define AD7605_CHANNEL(num) \
> + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW), \
> + BIT(IIO_CHAN_INFO_SCALE), 0)
> +
> +#define AD7606_CHANNEL(num) \
> + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW), \
> + BIT(IIO_CHAN_INFO_SCALE), \
> + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
>
> -#define AD7606_CHANNEL(num) \
> - AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
> +#define AD7616_CHANNEL(num) \
> + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),\
> + 0, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
>
> static const struct iio_chan_spec ad7605_channels[] = {
> IIO_CHAN_SOFT_TIMESTAMP(4),
> @@ -381,6 +487,26 @@ static const struct iio_chan_spec ad7616_channels[] = {
> AD7606_CHANNEL(15),
> };
>
> +static const struct iio_chan_spec ad7616_sw_channels[] = {
> + IIO_CHAN_SOFT_TIMESTAMP(16),
> + AD7616_CHANNEL(0),
> + AD7616_CHANNEL(1),
> + AD7616_CHANNEL(2),
> + AD7616_CHANNEL(3),
> + AD7616_CHANNEL(4),
> + AD7616_CHANNEL(5),
> + AD7616_CHANNEL(6),
> + AD7616_CHANNEL(7),
> + AD7616_CHANNEL(8),
> + AD7616_CHANNEL(9),
> + AD7616_CHANNEL(10),
> + AD7616_CHANNEL(11),
> + AD7616_CHANNEL(12),
> + AD7616_CHANNEL(13),
> + AD7616_CHANNEL(14),
> + AD7616_CHANNEL(15),
> +};
> +
> static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
> /* More devices added in future */
> [ID_AD7605_4] = {
> @@ -408,9 +534,13 @@ static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
> [ID_AD7616] = {
> .channels = ad7616_channels,
> .num_channels = 17,
> + .sw_mode_config = ad7616_sw_mode_config,
> .oversampling_avail = ad7616_oversampling_avail,
> .oversampling_num = ARRAY_SIZE(ad7616_oversampling_avail),
> .os_req_reset = true,
> + .spi_rd_wr_cmd = ad7616_spi_rd_wr_cmd,
> + .write_scale_sw = ad7616_write_scale_sw,
> + .write_os_sw = ad7616_write_os_sw,
> },
> };
>
> @@ -544,6 +674,23 @@ static void ad7606_regulator_disable(void *data)
> regulator_disable(st->reg);
> }
>
> +static int ad7616_sw_mode_config(struct iio_dev *indio_dev)
> +{
> + struct ad7606_state *st = iio_priv(indio_dev);
> +
> + /*
> + * Scale can be configured individually for each channel
> + * in software mode.
> + */
> + indio_dev->channels = ad7616_sw_channels;
> +
> + /* Activate Burst mode and SEQEN MODE */
> + return ad7606_spi_write_mask(st,
> + AD7616_CONFIGURATION_REGISTER,
> + AD7616_BURST_MODE | AD7616_SEQEN_MODE,
> + AD7616_BURST_MODE | AD7616_SEQEN_MODE);
> +}
> +
> int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> const char *name, unsigned int id,
> const struct ad7606_bus_ops *bops)
> @@ -617,6 +764,10 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> if (ret)
> dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
>
> + /* AD7616 requires al least 15ms to reconfigure after a reset */
> + if (msleep_interruptible(15))
> + return -ERESTARTSYS;
> +
> st->write_scale = ad7606_write_scale_hw;
> st->write_os = ad7606_write_os_hw;
>
> @@ -625,6 +776,10 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> "adi,sw-mode");
>
> if (st->sw_mode_en) {
> + /* Scale of 0.076293 is only available in sw mode */
> + st->scale_avail = ad7616_sw_scale_avail;
> + st->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
> +
> /* After reset, in software mode, ±10 V is set by default */
> memset32(st->range, 2, ARRAY_SIZE(st->range));
> indio_dev->info = &ad7606_info_os_and_range;
> diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
> index d8a509c2c428..154dc5d1a0cf 100644
> --- a/drivers/iio/adc/ad7606.h
> +++ b/drivers/iio/adc/ad7606.h
> @@ -16,6 +16,7 @@
> * oversampling ratios.
> * @oversampling_num number of elements stored in oversampling_avail array
> * @os_req_reset some devices require a reset to update oversampling
> + * @spi_rd_wr_cmd pointer to the function which calculates the spi address
> * @write_scale_sw pointer to the function which writes the scale via spi
> in software mode
> * @write_os_sw pointer to the function which writes the os via spi
> @@ -29,6 +30,7 @@ struct ad7606_chip_info {
> const unsigned int *oversampling_avail;
> unsigned int oversampling_num;
> bool os_req_reset;
> + u16 (*spi_rd_wr_cmd)(int addr, char isWriteOp);
> int (*write_scale_sw)(struct iio_dev *indio_dev, int ch, int val);
> int (*write_os_sw)(struct iio_dev *indio_dev, int val);
> int (*sw_mode_config)(struct iio_dev *indio_dev);
> @@ -63,6 +65,7 @@ struct ad7606_chip_info {
> * @complete completion to indicate end of conversion
> * @trig The IIO trigger associated with the device.
> * @data buffer for reading data from the device
> + * @d16 be16 buffer for reading data from the device
> */
> struct ad7606_state {
> struct device *dev;
> @@ -96,6 +99,7 @@ struct ad7606_state {
> * 16 * 16-bit samples + 64-bit timestamp
> */
> unsigned short data[20] ____cacheline_aligned;
> + __be16 d16[2];
> };
>
> /**
WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Cameron <jic23@kernel.org>
To: Beniamin Bia <beniamin.bia@analog.com>
Cc: lars@metafoo.de, Michael.Hennerich@analog.com, knaack.h@gmx.de,
pmeerw@pmeerw.net, gregkh@linuxfoundation.org,
linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org, mark.rutland@arm.com,
robh+dt@kernel.org, devicetree@vger.kernel.org,
biabeniamin@outlook.com
Subject: Re: [PATCH v2 3/4] iio: adc: ad7606: Add support for software mode for ad7616
Date: Sat, 8 Jun 2019 12:30:39 +0100 [thread overview]
Message-ID: <20190608123039.31e691bd@archlinux> (raw)
In-Reply-To: <20190527125650.2405-3-beniamin.bia@analog.com>
On Mon, 27 May 2019 15:56:49 +0300
Beniamin Bia <beniamin.bia@analog.com> wrote:
> Support for ad7616 running in software was added. In order
> to activate the software mode, HW_RNGSEL pins must be pulled low.
> Oversampling and input ranges are now configured in corresponding
> registers. Ad7616 has multiple scale options when it is configured
> in software mode.
> Also, in order to support multiple devices in software mode, the spi
> the calculation of registers address must be generic. Because
> the length of address and bit which specifies the read/write operation is
> different for every device, calculation of address was made generic.
>
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Applied to the togreg branch of iio.git and pushed out as testing
to see if the autobuilders can find anything we have missed.
Thanks,
Jonathan
> ---
> Changes in v2:
> -squashed with the patch which introduces the reg access function.
> -some casting warnings were fixed.
>
> drivers/iio/adc/ad7606.c | 171 +++++++++++++++++++++++++++++++++++++--
> drivers/iio/adc/ad7606.h | 4 +
> 2 files changed, 167 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
> index aba0fd123a51..8e09ad4bb72e 100644
> --- a/drivers/iio/adc/ad7606.c
> +++ b/drivers/iio/adc/ad7606.c
> @@ -25,8 +25,24 @@
> #include <linux/iio/triggered_buffer.h>
> #include <linux/iio/trigger_consumer.h>
>
> +#include <linux/spi/spi.h>
> +
> #include "ad7606.h"
>
> +#define AD7606_RANGE_CH_ADDR(ch) (0x03 + ((ch) >> 1))
> +#define AD7606_OS_MODE 0x08
> +
> +#define AD7616_CONFIGURATION_REGISTER 0x02
> +#define AD7616_OS_MASK GENMASK(4, 2)
> +#define AD7616_BURST_MODE BIT(6)
> +#define AD7616_SEQEN_MODE BIT(5)
> +#define AD7616_RANGE_CH_ADDR_OFF 0x04
> +#define AD7616_RANGE_CH_ADDR(ch) ((((ch) & 0x1) << 1) + ((ch) >> 3))
> +#define AD7616_RANGE_CH_MSK(ch) (GENMASK(1, 0) << ((ch) & 0x6))
> +#define AD7616_RANGE_CH_MODE(ch, mode) ((mode) << (ch & GENMASK(2, 1)))
> +
> +static int ad7616_sw_mode_config(struct iio_dev *indio_dev);
> +
> /*
> * Scales are computed as 5000/32768 and 10000/32768 respectively,
> * so that when applied to the raw values they provide mV values
> @@ -35,6 +51,11 @@ static const unsigned int ad7606_scale_avail[2] = {
> 152588, 305176
> };
>
> +
> +static const unsigned int ad7616_sw_scale_avail[3] = {
> + 76293, 152588, 305176
> +};
> +
> static const unsigned int ad7606_oversampling_avail[7] = {
> 1, 2, 4, 8, 16, 32, 64,
> };
> @@ -43,6 +64,11 @@ static const unsigned int ad7616_oversampling_avail[8] = {
> 1, 2, 4, 8, 16, 32, 64, 128,
> };
>
> +static u16 ad7616_spi_rd_wr_cmd(int addr, char isWriteOp)
> +{
> + return ((addr & 0x7F) << 1) | ((isWriteOp & 0x1) << 7);
> +}
> +
> static int ad7606_reset(struct ad7606_state *st)
> {
> if (st->gpio_reset) {
> @@ -55,6 +81,59 @@ static int ad7606_reset(struct ad7606_state *st)
> return -ENODEV;
> }
>
> +static int ad7606_spi_reg_read(struct ad7606_state *st, unsigned int addr)
> +{
> + struct spi_device *spi = to_spi_device(st->dev);
> + struct spi_transfer t[] = {
> + {
> + .tx_buf = &st->d16[0],
> + .len = 2,
> + .cs_change = 0,
> + }, {
> + .rx_buf = &st->d16[1],
> + .len = 2,
> + },
> + };
> + int ret;
> +
> + st->d16[0] = cpu_to_be16(st->chip_info->spi_rd_wr_cmd(addr, 0) << 8);
> +
> + ret = spi_sync_transfer(spi, t, ARRAY_SIZE(t));
> + if (ret < 0)
> + return ret;
> +
> + return be16_to_cpu(st->d16[1]);
> +}
> +
> +static int ad7606_spi_reg_write(struct ad7606_state *st,
> + unsigned int addr,
> + unsigned int val)
> +{
> + struct spi_device *spi = to_spi_device(st->dev);
> +
> + st->d16[0] = cpu_to_be16((st->chip_info->spi_rd_wr_cmd(addr, 1) << 8) |
> + (val & 0x1FF));
> +
> + return spi_write(spi, &st->d16[0], sizeof(st->d16[0]));
> +}
> +
> +static int ad7606_spi_write_mask(struct ad7606_state *st,
> + unsigned int addr,
> + unsigned long mask,
> + unsigned int val)
> +{
> + int readval;
> +
> + readval = ad7606_spi_reg_read(st, addr);
> + if (readval < 0)
> + return readval;
> +
> + readval &= ~mask;
> + readval |= val;
> +
> + return ad7606_spi_reg_write(st, addr, readval);
> +}
> +
> static int ad7606_read_samples(struct ad7606_state *st)
> {
> unsigned int num = st->chip_info->num_channels;
> @@ -222,6 +301,26 @@ static int ad7606_write_os_hw(struct iio_dev *indio_dev, int val)
> return 0;
> }
>
> +static int ad7616_write_scale_sw(struct iio_dev *indio_dev, int ch, int val)
> +{
> + struct ad7606_state *st = iio_priv(indio_dev);
> + unsigned int ch_addr, mode;
> +
> + ch_addr = AD7616_RANGE_CH_ADDR_OFF + AD7616_RANGE_CH_ADDR(ch);
> + mode = AD7616_RANGE_CH_MODE(ch, ((val + 1) & 0x3));
> +
> + return ad7606_spi_write_mask(st, ch_addr, AD7616_RANGE_CH_MSK(ch),
> + mode);
> +}
> +
> +static int ad7616_write_os_sw(struct iio_dev *indio_dev, int val)
> +{
> + struct ad7606_state *st = iio_priv(indio_dev);
> +
> + return ad7606_spi_write_mask(st, AD7616_CONFIGURATION_REGISTER,
> + AD7616_OS_MASK, val << 2);
> +}
> +
> static int ad7606_write_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan,
> int val,
> @@ -308,14 +407,14 @@ static const struct attribute_group ad7606_attribute_group_range = {
> .attrs = ad7606_attributes_range,
> };
>
> -#define AD760X_CHANNEL(num, mask) { \
> +#define AD760X_CHANNEL(num, mask_sep, mask_type, mask_all) { \
> .type = IIO_VOLTAGE, \
> .indexed = 1, \
> .channel = num, \
> .address = num, \
> - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\
> - .info_mask_shared_by_all = mask, \
> + .info_mask_separate = mask_sep, \
> + .info_mask_shared_by_type = mask_type, \
> + .info_mask_shared_by_all = mask_all, \
> .scan_index = num, \
> .scan_type = { \
> .sign = 's', \
> @@ -325,11 +424,18 @@ static const struct attribute_group ad7606_attribute_group_range = {
> }, \
> }
>
> -#define AD7605_CHANNEL(num) \
> - AD760X_CHANNEL(num, 0)
> +#define AD7605_CHANNEL(num) \
> + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW), \
> + BIT(IIO_CHAN_INFO_SCALE), 0)
> +
> +#define AD7606_CHANNEL(num) \
> + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW), \
> + BIT(IIO_CHAN_INFO_SCALE), \
> + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
>
> -#define AD7606_CHANNEL(num) \
> - AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
> +#define AD7616_CHANNEL(num) \
> + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),\
> + 0, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO))
>
> static const struct iio_chan_spec ad7605_channels[] = {
> IIO_CHAN_SOFT_TIMESTAMP(4),
> @@ -381,6 +487,26 @@ static const struct iio_chan_spec ad7616_channels[] = {
> AD7606_CHANNEL(15),
> };
>
> +static const struct iio_chan_spec ad7616_sw_channels[] = {
> + IIO_CHAN_SOFT_TIMESTAMP(16),
> + AD7616_CHANNEL(0),
> + AD7616_CHANNEL(1),
> + AD7616_CHANNEL(2),
> + AD7616_CHANNEL(3),
> + AD7616_CHANNEL(4),
> + AD7616_CHANNEL(5),
> + AD7616_CHANNEL(6),
> + AD7616_CHANNEL(7),
> + AD7616_CHANNEL(8),
> + AD7616_CHANNEL(9),
> + AD7616_CHANNEL(10),
> + AD7616_CHANNEL(11),
> + AD7616_CHANNEL(12),
> + AD7616_CHANNEL(13),
> + AD7616_CHANNEL(14),
> + AD7616_CHANNEL(15),
> +};
> +
> static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
> /* More devices added in future */
> [ID_AD7605_4] = {
> @@ -408,9 +534,13 @@ static const struct ad7606_chip_info ad7606_chip_info_tbl[] = {
> [ID_AD7616] = {
> .channels = ad7616_channels,
> .num_channels = 17,
> + .sw_mode_config = ad7616_sw_mode_config,
> .oversampling_avail = ad7616_oversampling_avail,
> .oversampling_num = ARRAY_SIZE(ad7616_oversampling_avail),
> .os_req_reset = true,
> + .spi_rd_wr_cmd = ad7616_spi_rd_wr_cmd,
> + .write_scale_sw = ad7616_write_scale_sw,
> + .write_os_sw = ad7616_write_os_sw,
> },
> };
>
> @@ -544,6 +674,23 @@ static void ad7606_regulator_disable(void *data)
> regulator_disable(st->reg);
> }
>
> +static int ad7616_sw_mode_config(struct iio_dev *indio_dev)
> +{
> + struct ad7606_state *st = iio_priv(indio_dev);
> +
> + /*
> + * Scale can be configured individually for each channel
> + * in software mode.
> + */
> + indio_dev->channels = ad7616_sw_channels;
> +
> + /* Activate Burst mode and SEQEN MODE */
> + return ad7606_spi_write_mask(st,
> + AD7616_CONFIGURATION_REGISTER,
> + AD7616_BURST_MODE | AD7616_SEQEN_MODE,
> + AD7616_BURST_MODE | AD7616_SEQEN_MODE);
> +}
> +
> int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> const char *name, unsigned int id,
> const struct ad7606_bus_ops *bops)
> @@ -617,6 +764,10 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> if (ret)
> dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
>
> + /* AD7616 requires al least 15ms to reconfigure after a reset */
> + if (msleep_interruptible(15))
> + return -ERESTARTSYS;
> +
> st->write_scale = ad7606_write_scale_hw;
> st->write_os = ad7606_write_os_hw;
>
> @@ -625,6 +776,10 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
> "adi,sw-mode");
>
> if (st->sw_mode_en) {
> + /* Scale of 0.076293 is only available in sw mode */
> + st->scale_avail = ad7616_sw_scale_avail;
> + st->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
> +
> /* After reset, in software mode, ±10 V is set by default */
> memset32(st->range, 2, ARRAY_SIZE(st->range));
> indio_dev->info = &ad7606_info_os_and_range;
> diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
> index d8a509c2c428..154dc5d1a0cf 100644
> --- a/drivers/iio/adc/ad7606.h
> +++ b/drivers/iio/adc/ad7606.h
> @@ -16,6 +16,7 @@
> * oversampling ratios.
> * @oversampling_num number of elements stored in oversampling_avail array
> * @os_req_reset some devices require a reset to update oversampling
> + * @spi_rd_wr_cmd pointer to the function which calculates the spi address
> * @write_scale_sw pointer to the function which writes the scale via spi
> in software mode
> * @write_os_sw pointer to the function which writes the os via spi
> @@ -29,6 +30,7 @@ struct ad7606_chip_info {
> const unsigned int *oversampling_avail;
> unsigned int oversampling_num;
> bool os_req_reset;
> + u16 (*spi_rd_wr_cmd)(int addr, char isWriteOp);
> int (*write_scale_sw)(struct iio_dev *indio_dev, int ch, int val);
> int (*write_os_sw)(struct iio_dev *indio_dev, int val);
> int (*sw_mode_config)(struct iio_dev *indio_dev);
> @@ -63,6 +65,7 @@ struct ad7606_chip_info {
> * @complete completion to indicate end of conversion
> * @trig The IIO trigger associated with the device.
> * @data buffer for reading data from the device
> + * @d16 be16 buffer for reading data from the device
> */
> struct ad7606_state {
> struct device *dev;
> @@ -96,6 +99,7 @@ struct ad7606_state {
> * 16 * 16-bit samples + 64-bit timestamp
> */
> unsigned short data[20] ____cacheline_aligned;
> + __be16 d16[2];
> };
>
> /**
next prev parent reply other threads:[~2019-06-08 11:30 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-27 12:56 [PATCH v2 1/4] iio: adc: ad7606: Move oversampling and scale options to chip info Beniamin Bia
2019-05-27 12:56 ` Beniamin Bia
2019-05-27 12:56 ` [PATCH v2 2/4] iio: adc: ad7606: Add software configuration Beniamin Bia
2019-05-27 12:56 ` Beniamin Bia
2019-06-08 11:27 ` Jonathan Cameron
2019-06-08 11:27 ` Jonathan Cameron
2019-05-27 12:56 ` [PATCH v2 3/4] iio: adc: ad7606: Add support for software mode for ad7616 Beniamin Bia
2019-05-27 12:56 ` Beniamin Bia
2019-06-08 11:30 ` Jonathan Cameron [this message]
2019-06-08 11:30 ` Jonathan Cameron
2019-06-17 20:07 ` Jonathan Cameron
2019-06-17 20:07 ` Jonathan Cameron
2019-05-27 12:56 ` [PATCH v2 4/4] iio: adc: ad7606: Add debug " Beniamin Bia
2019-05-27 12:56 ` Beniamin Bia
2019-06-08 11:34 ` Jonathan Cameron
2019-06-08 11:34 ` Jonathan Cameron
2019-06-08 11:23 ` [PATCH v2 1/4] iio: adc: ad7606: Move oversampling and scale options to chip info Jonathan Cameron
2019-06-08 11:23 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190608123039.31e691bd@archlinux \
--to=jic23@kernel.org \
--cc=Michael.Hennerich@analog.com \
--cc=beniamin.bia@analog.com \
--cc=biabeniamin@outlook.com \
--cc=devel@driverdev.osuosl.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.