From: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Maxime Ripard
<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
Subject: [PATCH v2 06/11] clk: sunxi-ng: v3s: add Allwinner V3 support
Date: Tue, 11 Jun 2019 22:09:35 +0800 [thread overview]
Message-ID: <20190611140940.14357-7-icenowy@aosc.io> (raw)
In-Reply-To: <20190611140940.14357-1-icenowy-h8G6r0blFSE@public.gmane.org>
Allwinner V3 has the same main die with V3s, but with more pins wired.
There's a I2S bus on V3 that is not available on V3s.
Add the V3-only peripheral's clocks and reset to the V3s CCU driver,
bound to a new V3 compatible string. The driver name is not changed
because it's part of the device tree binding (the header file name).
Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
---
No changes in v2.
drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 225 +++++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sun8i-v3s.h | 2 +-
include/dt-bindings/clock/sun8i-v3s-ccu.h | 4 +
include/dt-bindings/reset/sun8i-v3s-ccu.h | 3 +
4 files changed, 231 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
index efc3c87ea744..d523a39a2eb8 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -243,6 +243,8 @@ static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
0x068, BIT(0), 0);
static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
+ 0x068, BIT(12), 0);
static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
0x06c, BIT(0), 0);
@@ -314,6 +316,11 @@ static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
BIT(31), /* gate */
0);
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+ 0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
0x0cc, BIT(8), 0);
static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc24M",
@@ -447,6 +454,80 @@ static struct ccu_common *sun8i_v3s_ccu_clks[] = {
&mipi_csi_clk.common,
};
+static struct ccu_common *sun8i_v3_ccu_clks[] = {
+ &pll_cpu_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr0_clk.common,
+ &pll_periph0_clk.common,
+ &pll_isp_clk.common,
+ &pll_periph1_clk.common,
+ &pll_ddr1_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &ahb1_clk.common,
+ &apb1_clk.common,
+ &apb2_clk.common,
+ &ahb2_clk.common,
+ &bus_ce_clk.common,
+ &bus_dma_clk.common,
+ &bus_mmc0_clk.common,
+ &bus_mmc1_clk.common,
+ &bus_mmc2_clk.common,
+ &bus_dram_clk.common,
+ &bus_emac_clk.common,
+ &bus_hstimer_clk.common,
+ &bus_spi0_clk.common,
+ &bus_otg_clk.common,
+ &bus_ehci0_clk.common,
+ &bus_ohci0_clk.common,
+ &bus_ve_clk.common,
+ &bus_tcon0_clk.common,
+ &bus_csi_clk.common,
+ &bus_de_clk.common,
+ &bus_codec_clk.common,
+ &bus_pio_clk.common,
+ &bus_i2s0_clk.common,
+ &bus_i2c0_clk.common,
+ &bus_i2c1_clk.common,
+ &bus_uart0_clk.common,
+ &bus_uart1_clk.common,
+ &bus_uart2_clk.common,
+ &bus_ephy_clk.common,
+ &bus_dbg_clk.common,
+ &mmc0_clk.common,
+ &mmc0_sample_clk.common,
+ &mmc0_output_clk.common,
+ &mmc1_clk.common,
+ &mmc1_sample_clk.common,
+ &mmc1_output_clk.common,
+ &mmc2_clk.common,
+ &mmc2_sample_clk.common,
+ &mmc2_output_clk.common,
+ &ce_clk.common,
+ &spi0_clk.common,
+ &i2s0_clk.common,
+ &usb_phy0_clk.common,
+ &usb_ohci0_clk.common,
+ &dram_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi_clk.common,
+ &dram_ohci_clk.common,
+ &dram_ehci_clk.common,
+ &de_clk.common,
+ &tcon_clk.common,
+ &csi_misc_clk.common,
+ &csi0_mclk_clk.common,
+ &csi1_sclk_clk.common,
+ &csi1_mclk_clk.common,
+ &ve_clk.common,
+ &ac_dig_clk.common,
+ &avs_clk.common,
+ &mbus_clk.common,
+ &mipi_csi_clk.common,
+};
+
/* We hardcode the divider to 4 for now */
static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
@@ -536,6 +617,85 @@ static struct clk_hw_onecell_data sun8i_v3s_hw_clks = {
.num = CLK_NUMBER,
};
+static struct clk_hw_onecell_data sun8i_v3_hw_clks = {
+ .hws = {
+ [CLK_PLL_CPU] = &pll_cpu_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO] = &pll_video_clk.common.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
+ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
+ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
+ [CLK_PLL_ISP] = &pll_isp_clk.common.hw,
+ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
+ [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB1] = &ahb1_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_APB2] = &apb2_clk.common.hw,
+ [CLK_AHB2] = &ahb2_clk.common.hw,
+ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
+ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
+ [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
+ [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
+ [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
+ [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
+ [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_BUS_EPHY] = &bus_ephy_clk.common.hw,
+ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
+ [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
+ [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
+ [CLK_CE] = &ce_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_DRAM] = &dram_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
+ [CLK_DRAM_EHCI] = &dram_ehci_clk.common.hw,
+ [CLK_DRAM_OHCI] = &dram_ohci_clk.common.hw,
+ [CLK_DE] = &de_clk.common.hw,
+ [CLK_TCON0] = &tcon_clk.common.hw,
+ [CLK_CSI_MISC] = &csi_misc_clk.common.hw,
+ [CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
+ [CLK_CSI1_SCLK] = &csi1_sclk_clk.common.hw,
+ [CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_AC_DIG] = &ac_dig_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_MIPI_CSI] = &mipi_csi_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
[RST_USB_PHY0] = { 0x0cc, BIT(0) },
@@ -571,6 +731,42 @@ static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
[RST_BUS_UART2] = { 0x2d8, BIT(18) },
};
+static struct ccu_reset_map sun8i_v3_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+
+ [RST_MBUS] = { 0x0fc, BIT(31) },
+
+ [RST_BUS_CE] = { 0x2c0, BIT(5) },
+ [RST_BUS_DMA] = { 0x2c0, BIT(6) },
+ [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
+ [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
+ [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
+ [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
+ [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
+ [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
+ [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
+ [RST_BUS_OTG] = { 0x2c0, BIT(24) },
+ [RST_BUS_EHCI0] = { 0x2c0, BIT(26) },
+ [RST_BUS_OHCI0] = { 0x2c0, BIT(29) },
+
+ [RST_BUS_VE] = { 0x2c4, BIT(0) },
+ [RST_BUS_TCON0] = { 0x2c4, BIT(4) },
+ [RST_BUS_CSI] = { 0x2c4, BIT(8) },
+ [RST_BUS_DE] = { 0x2c4, BIT(12) },
+ [RST_BUS_DBG] = { 0x2c4, BIT(31) },
+
+ [RST_BUS_EPHY] = { 0x2c8, BIT(2) },
+
+ [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
+ [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
+
+ [RST_BUS_I2C0] = { 0x2d8, BIT(0) },
+ [RST_BUS_I2C1] = { 0x2d8, BIT(1) },
+ [RST_BUS_UART0] = { 0x2d8, BIT(16) },
+ [RST_BUS_UART1] = { 0x2d8, BIT(17) },
+ [RST_BUS_UART2] = { 0x2d8, BIT(18) },
+};
+
static const struct sunxi_ccu_desc sun8i_v3s_ccu_desc = {
.ccu_clks = sun8i_v3s_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun8i_v3s_ccu_clks),
@@ -581,7 +777,18 @@ static const struct sunxi_ccu_desc sun8i_v3s_ccu_desc = {
.num_resets = ARRAY_SIZE(sun8i_v3s_ccu_resets),
};
-static void __init sun8i_v3s_ccu_setup(struct device_node *node)
+static const struct sunxi_ccu_desc sun8i_v3_ccu_desc = {
+ .ccu_clks = sun8i_v3_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun8i_v3_ccu_clks),
+
+ .hw_clks = &sun8i_v3_hw_clks,
+
+ .resets = sun8i_v3_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun8i_v3_ccu_resets),
+};
+
+static void __init sun8i_v3_v3s_ccu_init(struct device_node *node,
+ const struct sunxi_ccu_desc *ccu_desc)
{
void __iomem *reg;
u32 val;
@@ -597,7 +804,21 @@ static void __init sun8i_v3s_ccu_setup(struct device_node *node)
val &= ~GENMASK(19, 16);
writel(val | (3 << 16), reg + SUN8I_V3S_PLL_AUDIO_REG);
- sunxi_ccu_probe(node, reg, &sun8i_v3s_ccu_desc);
+ sunxi_ccu_probe(node, reg, ccu_desc);
+}
+
+static void __init sun8i_v3s_ccu_setup(struct device_node *node)
+{
+ sun8i_v3_v3s_ccu_init(node, &sun8i_v3s_ccu_desc);
+}
+
+static void __init sun8i_v3_ccu_setup(struct device_node *node)
+{
+ sun8i_v3_v3s_ccu_init(node, &sun8i_v3_ccu_desc);
}
+
CLK_OF_DECLARE(sun8i_v3s_ccu, "allwinner,sun8i-v3s-ccu",
sun8i_v3s_ccu_setup);
+
+CLK_OF_DECLARE(sun8i_v3_ccu, "allwinner,sun8i-v3-ccu",
+ sun8i_v3_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
index 10af324bd6b1..b0160d305a67 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
@@ -51,6 +51,6 @@
#define CLK_PLL_DDR1 74
-#define CLK_NUMBER (CLK_PLL_DDR1 + 1)
+#define CLK_NUMBER (CLK_I2S0 + 1)
#endif /* _CCU_SUN8I_H3_H_ */
diff --git a/include/dt-bindings/clock/sun8i-v3s-ccu.h b/include/dt-bindings/clock/sun8i-v3s-ccu.h
index c0d5d5599c87..014ac6123d17 100644
--- a/include/dt-bindings/clock/sun8i-v3s-ccu.h
+++ b/include/dt-bindings/clock/sun8i-v3s-ccu.h
@@ -104,4 +104,8 @@
#define CLK_MIPI_CSI 73
+/* Clocks not available on V3s */
+#define CLK_BUS_I2S0 75
+#define CLK_I2S0 76
+
#endif /* _DT_BINDINGS_CLK_SUN8I_V3S_H_ */
diff --git a/include/dt-bindings/reset/sun8i-v3s-ccu.h b/include/dt-bindings/reset/sun8i-v3s-ccu.h
index b58ef21a2e18..b6790173afd6 100644
--- a/include/dt-bindings/reset/sun8i-v3s-ccu.h
+++ b/include/dt-bindings/reset/sun8i-v3s-ccu.h
@@ -75,4 +75,7 @@
#define RST_BUS_UART1 50
#define RST_BUS_UART2 51
+/* Reset lines not available on V3s */
+#define RST_BUS_I2S0 52
+
#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Icenowy Zheng <icenowy@aosc.io>
To: Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-sunxi@googlegroups.com,
Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v2 06/11] clk: sunxi-ng: v3s: add Allwinner V3 support
Date: Tue, 11 Jun 2019 22:09:35 +0800 [thread overview]
Message-ID: <20190611140940.14357-7-icenowy@aosc.io> (raw)
In-Reply-To: <20190611140940.14357-1-icenowy@aosc.io>
Allwinner V3 has the same main die with V3s, but with more pins wired.
There's a I2S bus on V3 that is not available on V3s.
Add the V3-only peripheral's clocks and reset to the V3s CCU driver,
bound to a new V3 compatible string. The driver name is not changed
because it's part of the device tree binding (the header file name).
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
No changes in v2.
drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 225 +++++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sun8i-v3s.h | 2 +-
include/dt-bindings/clock/sun8i-v3s-ccu.h | 4 +
include/dt-bindings/reset/sun8i-v3s-ccu.h | 3 +
4 files changed, 231 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
index efc3c87ea744..d523a39a2eb8 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -243,6 +243,8 @@ static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
0x068, BIT(0), 0);
static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
+ 0x068, BIT(12), 0);
static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
0x06c, BIT(0), 0);
@@ -314,6 +316,11 @@ static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
BIT(31), /* gate */
0);
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+ 0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
0x0cc, BIT(8), 0);
static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc24M",
@@ -447,6 +454,80 @@ static struct ccu_common *sun8i_v3s_ccu_clks[] = {
&mipi_csi_clk.common,
};
+static struct ccu_common *sun8i_v3_ccu_clks[] = {
+ &pll_cpu_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr0_clk.common,
+ &pll_periph0_clk.common,
+ &pll_isp_clk.common,
+ &pll_periph1_clk.common,
+ &pll_ddr1_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &ahb1_clk.common,
+ &apb1_clk.common,
+ &apb2_clk.common,
+ &ahb2_clk.common,
+ &bus_ce_clk.common,
+ &bus_dma_clk.common,
+ &bus_mmc0_clk.common,
+ &bus_mmc1_clk.common,
+ &bus_mmc2_clk.common,
+ &bus_dram_clk.common,
+ &bus_emac_clk.common,
+ &bus_hstimer_clk.common,
+ &bus_spi0_clk.common,
+ &bus_otg_clk.common,
+ &bus_ehci0_clk.common,
+ &bus_ohci0_clk.common,
+ &bus_ve_clk.common,
+ &bus_tcon0_clk.common,
+ &bus_csi_clk.common,
+ &bus_de_clk.common,
+ &bus_codec_clk.common,
+ &bus_pio_clk.common,
+ &bus_i2s0_clk.common,
+ &bus_i2c0_clk.common,
+ &bus_i2c1_clk.common,
+ &bus_uart0_clk.common,
+ &bus_uart1_clk.common,
+ &bus_uart2_clk.common,
+ &bus_ephy_clk.common,
+ &bus_dbg_clk.common,
+ &mmc0_clk.common,
+ &mmc0_sample_clk.common,
+ &mmc0_output_clk.common,
+ &mmc1_clk.common,
+ &mmc1_sample_clk.common,
+ &mmc1_output_clk.common,
+ &mmc2_clk.common,
+ &mmc2_sample_clk.common,
+ &mmc2_output_clk.common,
+ &ce_clk.common,
+ &spi0_clk.common,
+ &i2s0_clk.common,
+ &usb_phy0_clk.common,
+ &usb_ohci0_clk.common,
+ &dram_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi_clk.common,
+ &dram_ohci_clk.common,
+ &dram_ehci_clk.common,
+ &de_clk.common,
+ &tcon_clk.common,
+ &csi_misc_clk.common,
+ &csi0_mclk_clk.common,
+ &csi1_sclk_clk.common,
+ &csi1_mclk_clk.common,
+ &ve_clk.common,
+ &ac_dig_clk.common,
+ &avs_clk.common,
+ &mbus_clk.common,
+ &mipi_csi_clk.common,
+};
+
/* We hardcode the divider to 4 for now */
static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
@@ -536,6 +617,85 @@ static struct clk_hw_onecell_data sun8i_v3s_hw_clks = {
.num = CLK_NUMBER,
};
+static struct clk_hw_onecell_data sun8i_v3_hw_clks = {
+ .hws = {
+ [CLK_PLL_CPU] = &pll_cpu_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO] = &pll_video_clk.common.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
+ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
+ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
+ [CLK_PLL_ISP] = &pll_isp_clk.common.hw,
+ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
+ [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB1] = &ahb1_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_APB2] = &apb2_clk.common.hw,
+ [CLK_AHB2] = &ahb2_clk.common.hw,
+ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
+ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
+ [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
+ [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
+ [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
+ [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
+ [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_BUS_EPHY] = &bus_ephy_clk.common.hw,
+ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
+ [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
+ [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
+ [CLK_CE] = &ce_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_DRAM] = &dram_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
+ [CLK_DRAM_EHCI] = &dram_ehci_clk.common.hw,
+ [CLK_DRAM_OHCI] = &dram_ohci_clk.common.hw,
+ [CLK_DE] = &de_clk.common.hw,
+ [CLK_TCON0] = &tcon_clk.common.hw,
+ [CLK_CSI_MISC] = &csi_misc_clk.common.hw,
+ [CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
+ [CLK_CSI1_SCLK] = &csi1_sclk_clk.common.hw,
+ [CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_AC_DIG] = &ac_dig_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_MIPI_CSI] = &mipi_csi_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
[RST_USB_PHY0] = { 0x0cc, BIT(0) },
@@ -571,6 +731,42 @@ static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
[RST_BUS_UART2] = { 0x2d8, BIT(18) },
};
+static struct ccu_reset_map sun8i_v3_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+
+ [RST_MBUS] = { 0x0fc, BIT(31) },
+
+ [RST_BUS_CE] = { 0x2c0, BIT(5) },
+ [RST_BUS_DMA] = { 0x2c0, BIT(6) },
+ [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
+ [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
+ [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
+ [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
+ [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
+ [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
+ [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
+ [RST_BUS_OTG] = { 0x2c0, BIT(24) },
+ [RST_BUS_EHCI0] = { 0x2c0, BIT(26) },
+ [RST_BUS_OHCI0] = { 0x2c0, BIT(29) },
+
+ [RST_BUS_VE] = { 0x2c4, BIT(0) },
+ [RST_BUS_TCON0] = { 0x2c4, BIT(4) },
+ [RST_BUS_CSI] = { 0x2c4, BIT(8) },
+ [RST_BUS_DE] = { 0x2c4, BIT(12) },
+ [RST_BUS_DBG] = { 0x2c4, BIT(31) },
+
+ [RST_BUS_EPHY] = { 0x2c8, BIT(2) },
+
+ [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
+ [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
+
+ [RST_BUS_I2C0] = { 0x2d8, BIT(0) },
+ [RST_BUS_I2C1] = { 0x2d8, BIT(1) },
+ [RST_BUS_UART0] = { 0x2d8, BIT(16) },
+ [RST_BUS_UART1] = { 0x2d8, BIT(17) },
+ [RST_BUS_UART2] = { 0x2d8, BIT(18) },
+};
+
static const struct sunxi_ccu_desc sun8i_v3s_ccu_desc = {
.ccu_clks = sun8i_v3s_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun8i_v3s_ccu_clks),
@@ -581,7 +777,18 @@ static const struct sunxi_ccu_desc sun8i_v3s_ccu_desc = {
.num_resets = ARRAY_SIZE(sun8i_v3s_ccu_resets),
};
-static void __init sun8i_v3s_ccu_setup(struct device_node *node)
+static const struct sunxi_ccu_desc sun8i_v3_ccu_desc = {
+ .ccu_clks = sun8i_v3_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun8i_v3_ccu_clks),
+
+ .hw_clks = &sun8i_v3_hw_clks,
+
+ .resets = sun8i_v3_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun8i_v3_ccu_resets),
+};
+
+static void __init sun8i_v3_v3s_ccu_init(struct device_node *node,
+ const struct sunxi_ccu_desc *ccu_desc)
{
void __iomem *reg;
u32 val;
@@ -597,7 +804,21 @@ static void __init sun8i_v3s_ccu_setup(struct device_node *node)
val &= ~GENMASK(19, 16);
writel(val | (3 << 16), reg + SUN8I_V3S_PLL_AUDIO_REG);
- sunxi_ccu_probe(node, reg, &sun8i_v3s_ccu_desc);
+ sunxi_ccu_probe(node, reg, ccu_desc);
+}
+
+static void __init sun8i_v3s_ccu_setup(struct device_node *node)
+{
+ sun8i_v3_v3s_ccu_init(node, &sun8i_v3s_ccu_desc);
+}
+
+static void __init sun8i_v3_ccu_setup(struct device_node *node)
+{
+ sun8i_v3_v3s_ccu_init(node, &sun8i_v3_ccu_desc);
}
+
CLK_OF_DECLARE(sun8i_v3s_ccu, "allwinner,sun8i-v3s-ccu",
sun8i_v3s_ccu_setup);
+
+CLK_OF_DECLARE(sun8i_v3_ccu, "allwinner,sun8i-v3-ccu",
+ sun8i_v3_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
index 10af324bd6b1..b0160d305a67 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
@@ -51,6 +51,6 @@
#define CLK_PLL_DDR1 74
-#define CLK_NUMBER (CLK_PLL_DDR1 + 1)
+#define CLK_NUMBER (CLK_I2S0 + 1)
#endif /* _CCU_SUN8I_H3_H_ */
diff --git a/include/dt-bindings/clock/sun8i-v3s-ccu.h b/include/dt-bindings/clock/sun8i-v3s-ccu.h
index c0d5d5599c87..014ac6123d17 100644
--- a/include/dt-bindings/clock/sun8i-v3s-ccu.h
+++ b/include/dt-bindings/clock/sun8i-v3s-ccu.h
@@ -104,4 +104,8 @@
#define CLK_MIPI_CSI 73
+/* Clocks not available on V3s */
+#define CLK_BUS_I2S0 75
+#define CLK_I2S0 76
+
#endif /* _DT_BINDINGS_CLK_SUN8I_V3S_H_ */
diff --git a/include/dt-bindings/reset/sun8i-v3s-ccu.h b/include/dt-bindings/reset/sun8i-v3s-ccu.h
index b58ef21a2e18..b6790173afd6 100644
--- a/include/dt-bindings/reset/sun8i-v3s-ccu.h
+++ b/include/dt-bindings/reset/sun8i-v3s-ccu.h
@@ -75,4 +75,7 @@
#define RST_BUS_UART1 50
#define RST_BUS_UART2 51
+/* Reset lines not available on V3s */
+#define RST_BUS_I2S0 52
+
#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Icenowy Zheng <icenowy@aosc.io>
To: Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-sunxi@googlegroups.com,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v2 06/11] clk: sunxi-ng: v3s: add Allwinner V3 support
Date: Tue, 11 Jun 2019 22:09:35 +0800 [thread overview]
Message-ID: <20190611140940.14357-7-icenowy@aosc.io> (raw)
In-Reply-To: <20190611140940.14357-1-icenowy@aosc.io>
Allwinner V3 has the same main die with V3s, but with more pins wired.
There's a I2S bus on V3 that is not available on V3s.
Add the V3-only peripheral's clocks and reset to the V3s CCU driver,
bound to a new V3 compatible string. The driver name is not changed
because it's part of the device tree binding (the header file name).
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
No changes in v2.
drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 225 +++++++++++++++++++++-
drivers/clk/sunxi-ng/ccu-sun8i-v3s.h | 2 +-
include/dt-bindings/clock/sun8i-v3s-ccu.h | 4 +
include/dt-bindings/reset/sun8i-v3s-ccu.h | 3 +
4 files changed, 231 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
index efc3c87ea744..d523a39a2eb8 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -243,6 +243,8 @@ static SUNXI_CCU_GATE(bus_codec_clk, "bus-codec", "apb1",
0x068, BIT(0), 0);
static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb1",
0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1",
+ 0x068, BIT(12), 0);
static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2",
0x06c, BIT(0), 0);
@@ -314,6 +316,11 @@ static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
BIT(31), /* gate */
0);
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+ "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+ 0x0b0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);
+
static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M",
0x0cc, BIT(8), 0);
static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc24M",
@@ -447,6 +454,80 @@ static struct ccu_common *sun8i_v3s_ccu_clks[] = {
&mipi_csi_clk.common,
};
+static struct ccu_common *sun8i_v3_ccu_clks[] = {
+ &pll_cpu_clk.common,
+ &pll_audio_base_clk.common,
+ &pll_video_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr0_clk.common,
+ &pll_periph0_clk.common,
+ &pll_isp_clk.common,
+ &pll_periph1_clk.common,
+ &pll_ddr1_clk.common,
+ &cpu_clk.common,
+ &axi_clk.common,
+ &ahb1_clk.common,
+ &apb1_clk.common,
+ &apb2_clk.common,
+ &ahb2_clk.common,
+ &bus_ce_clk.common,
+ &bus_dma_clk.common,
+ &bus_mmc0_clk.common,
+ &bus_mmc1_clk.common,
+ &bus_mmc2_clk.common,
+ &bus_dram_clk.common,
+ &bus_emac_clk.common,
+ &bus_hstimer_clk.common,
+ &bus_spi0_clk.common,
+ &bus_otg_clk.common,
+ &bus_ehci0_clk.common,
+ &bus_ohci0_clk.common,
+ &bus_ve_clk.common,
+ &bus_tcon0_clk.common,
+ &bus_csi_clk.common,
+ &bus_de_clk.common,
+ &bus_codec_clk.common,
+ &bus_pio_clk.common,
+ &bus_i2s0_clk.common,
+ &bus_i2c0_clk.common,
+ &bus_i2c1_clk.common,
+ &bus_uart0_clk.common,
+ &bus_uart1_clk.common,
+ &bus_uart2_clk.common,
+ &bus_ephy_clk.common,
+ &bus_dbg_clk.common,
+ &mmc0_clk.common,
+ &mmc0_sample_clk.common,
+ &mmc0_output_clk.common,
+ &mmc1_clk.common,
+ &mmc1_sample_clk.common,
+ &mmc1_output_clk.common,
+ &mmc2_clk.common,
+ &mmc2_sample_clk.common,
+ &mmc2_output_clk.common,
+ &ce_clk.common,
+ &spi0_clk.common,
+ &i2s0_clk.common,
+ &usb_phy0_clk.common,
+ &usb_ohci0_clk.common,
+ &dram_clk.common,
+ &dram_ve_clk.common,
+ &dram_csi_clk.common,
+ &dram_ohci_clk.common,
+ &dram_ehci_clk.common,
+ &de_clk.common,
+ &tcon_clk.common,
+ &csi_misc_clk.common,
+ &csi0_mclk_clk.common,
+ &csi1_sclk_clk.common,
+ &csi1_mclk_clk.common,
+ &ve_clk.common,
+ &ac_dig_clk.common,
+ &avs_clk.common,
+ &mbus_clk.common,
+ &mipi_csi_clk.common,
+};
+
/* We hardcode the divider to 4 for now */
static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
@@ -536,6 +617,85 @@ static struct clk_hw_onecell_data sun8i_v3s_hw_clks = {
.num = CLK_NUMBER,
};
+static struct clk_hw_onecell_data sun8i_v3_hw_clks = {
+ .hws = {
+ [CLK_PLL_CPU] = &pll_cpu_clk.common.hw,
+ [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw,
+ [CLK_PLL_VIDEO] = &pll_video_clk.common.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
+ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
+ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
+ [CLK_PLL_ISP] = &pll_isp_clk.common.hw,
+ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
+ [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
+ [CLK_CPU] = &cpu_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_AHB1] = &ahb1_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_APB2] = &apb2_clk.common.hw,
+ [CLK_AHB2] = &ahb2_clk.common.hw,
+ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
+ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
+ [CLK_BUS_EMAC] = &bus_emac_clk.common.hw,
+ [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw,
+ [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
+ [CLK_BUS_CODEC] = &bus_codec_clk.common.hw,
+ [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_BUS_EPHY] = &bus_ephy_clk.common.hw,
+ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
+ [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
+ [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
+ [CLK_CE] = &ce_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_DRAM] = &dram_clk.common.hw,
+ [CLK_DRAM_VE] = &dram_ve_clk.common.hw,
+ [CLK_DRAM_CSI] = &dram_csi_clk.common.hw,
+ [CLK_DRAM_EHCI] = &dram_ehci_clk.common.hw,
+ [CLK_DRAM_OHCI] = &dram_ohci_clk.common.hw,
+ [CLK_DE] = &de_clk.common.hw,
+ [CLK_TCON0] = &tcon_clk.common.hw,
+ [CLK_CSI_MISC] = &csi_misc_clk.common.hw,
+ [CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
+ [CLK_CSI1_SCLK] = &csi1_sclk_clk.common.hw,
+ [CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_AC_DIG] = &ac_dig_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_MIPI_CSI] = &mipi_csi_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
[RST_USB_PHY0] = { 0x0cc, BIT(0) },
@@ -571,6 +731,42 @@ static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
[RST_BUS_UART2] = { 0x2d8, BIT(18) },
};
+static struct ccu_reset_map sun8i_v3_ccu_resets[] = {
+ [RST_USB_PHY0] = { 0x0cc, BIT(0) },
+
+ [RST_MBUS] = { 0x0fc, BIT(31) },
+
+ [RST_BUS_CE] = { 0x2c0, BIT(5) },
+ [RST_BUS_DMA] = { 0x2c0, BIT(6) },
+ [RST_BUS_MMC0] = { 0x2c0, BIT(8) },
+ [RST_BUS_MMC1] = { 0x2c0, BIT(9) },
+ [RST_BUS_MMC2] = { 0x2c0, BIT(10) },
+ [RST_BUS_DRAM] = { 0x2c0, BIT(14) },
+ [RST_BUS_EMAC] = { 0x2c0, BIT(17) },
+ [RST_BUS_HSTIMER] = { 0x2c0, BIT(19) },
+ [RST_BUS_SPI0] = { 0x2c0, BIT(20) },
+ [RST_BUS_OTG] = { 0x2c0, BIT(24) },
+ [RST_BUS_EHCI0] = { 0x2c0, BIT(26) },
+ [RST_BUS_OHCI0] = { 0x2c0, BIT(29) },
+
+ [RST_BUS_VE] = { 0x2c4, BIT(0) },
+ [RST_BUS_TCON0] = { 0x2c4, BIT(4) },
+ [RST_BUS_CSI] = { 0x2c4, BIT(8) },
+ [RST_BUS_DE] = { 0x2c4, BIT(12) },
+ [RST_BUS_DBG] = { 0x2c4, BIT(31) },
+
+ [RST_BUS_EPHY] = { 0x2c8, BIT(2) },
+
+ [RST_BUS_CODEC] = { 0x2d0, BIT(0) },
+ [RST_BUS_I2S0] = { 0x2d0, BIT(12) },
+
+ [RST_BUS_I2C0] = { 0x2d8, BIT(0) },
+ [RST_BUS_I2C1] = { 0x2d8, BIT(1) },
+ [RST_BUS_UART0] = { 0x2d8, BIT(16) },
+ [RST_BUS_UART1] = { 0x2d8, BIT(17) },
+ [RST_BUS_UART2] = { 0x2d8, BIT(18) },
+};
+
static const struct sunxi_ccu_desc sun8i_v3s_ccu_desc = {
.ccu_clks = sun8i_v3s_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun8i_v3s_ccu_clks),
@@ -581,7 +777,18 @@ static const struct sunxi_ccu_desc sun8i_v3s_ccu_desc = {
.num_resets = ARRAY_SIZE(sun8i_v3s_ccu_resets),
};
-static void __init sun8i_v3s_ccu_setup(struct device_node *node)
+static const struct sunxi_ccu_desc sun8i_v3_ccu_desc = {
+ .ccu_clks = sun8i_v3_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun8i_v3_ccu_clks),
+
+ .hw_clks = &sun8i_v3_hw_clks,
+
+ .resets = sun8i_v3_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun8i_v3_ccu_resets),
+};
+
+static void __init sun8i_v3_v3s_ccu_init(struct device_node *node,
+ const struct sunxi_ccu_desc *ccu_desc)
{
void __iomem *reg;
u32 val;
@@ -597,7 +804,21 @@ static void __init sun8i_v3s_ccu_setup(struct device_node *node)
val &= ~GENMASK(19, 16);
writel(val | (3 << 16), reg + SUN8I_V3S_PLL_AUDIO_REG);
- sunxi_ccu_probe(node, reg, &sun8i_v3s_ccu_desc);
+ sunxi_ccu_probe(node, reg, ccu_desc);
+}
+
+static void __init sun8i_v3s_ccu_setup(struct device_node *node)
+{
+ sun8i_v3_v3s_ccu_init(node, &sun8i_v3s_ccu_desc);
+}
+
+static void __init sun8i_v3_ccu_setup(struct device_node *node)
+{
+ sun8i_v3_v3s_ccu_init(node, &sun8i_v3_ccu_desc);
}
+
CLK_OF_DECLARE(sun8i_v3s_ccu, "allwinner,sun8i-v3s-ccu",
sun8i_v3s_ccu_setup);
+
+CLK_OF_DECLARE(sun8i_v3_ccu, "allwinner,sun8i-v3-ccu",
+ sun8i_v3_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
index 10af324bd6b1..b0160d305a67 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.h
@@ -51,6 +51,6 @@
#define CLK_PLL_DDR1 74
-#define CLK_NUMBER (CLK_PLL_DDR1 + 1)
+#define CLK_NUMBER (CLK_I2S0 + 1)
#endif /* _CCU_SUN8I_H3_H_ */
diff --git a/include/dt-bindings/clock/sun8i-v3s-ccu.h b/include/dt-bindings/clock/sun8i-v3s-ccu.h
index c0d5d5599c87..014ac6123d17 100644
--- a/include/dt-bindings/clock/sun8i-v3s-ccu.h
+++ b/include/dt-bindings/clock/sun8i-v3s-ccu.h
@@ -104,4 +104,8 @@
#define CLK_MIPI_CSI 73
+/* Clocks not available on V3s */
+#define CLK_BUS_I2S0 75
+#define CLK_I2S0 76
+
#endif /* _DT_BINDINGS_CLK_SUN8I_V3S_H_ */
diff --git a/include/dt-bindings/reset/sun8i-v3s-ccu.h b/include/dt-bindings/reset/sun8i-v3s-ccu.h
index b58ef21a2e18..b6790173afd6 100644
--- a/include/dt-bindings/reset/sun8i-v3s-ccu.h
+++ b/include/dt-bindings/reset/sun8i-v3s-ccu.h
@@ -75,4 +75,7 @@
#define RST_BUS_UART1 50
#define RST_BUS_UART2 51
+/* Reset lines not available on V3s */
+#define RST_BUS_I2S0 52
+
#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-06-11 14:09 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-11 14:09 [PATCH v2 00/11] Support for Allwinner V3/S3L and Sochip S3 Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
[not found] ` <20190611140940.14357-1-icenowy-h8G6r0blFSE@public.gmane.org>
2019-06-11 14:09 ` [PATCH v2 01/11] dt-bindings: pinctrl: add missing compatible string for V3s Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
[not found] ` <20190611140940.14357-2-icenowy-h8G6r0blFSE@public.gmane.org>
2019-06-12 12:11 ` Linus Walleij
2019-06-12 12:11 ` Linus Walleij
2019-06-12 12:11 ` Linus Walleij
2019-06-11 14:09 ` [PATCH v2 02/11] dt-bindings: pinctrl: add compatible string for Allwinner V3 pinctrl Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
[not found] ` <20190611140940.14357-3-icenowy-h8G6r0blFSE@public.gmane.org>
2019-06-12 12:12 ` Linus Walleij
2019-06-12 12:12 ` Linus Walleij
2019-06-12 12:12 ` Linus Walleij
2019-06-11 14:09 ` [PATCH v2 03/11] pinctrl: sunxi: v3s: introduce support for V3 Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
[not found] ` <20190611140940.14357-4-icenowy-h8G6r0blFSE@public.gmane.org>
2019-06-11 14:27 ` Maxime Ripard
2019-06-11 14:27 ` Maxime Ripard
2019-06-11 14:27 ` Maxime Ripard
2019-06-12 7:16 ` Paul Kocialkowski
2019-06-12 7:16 ` [linux-sunxi] " Paul Kocialkowski
2019-06-12 7:16 ` Paul Kocialkowski
2019-06-11 14:09 ` [PATCH v2 04/11] clk: sunxi-ng: v3s: add the missing PLL_DDR1 Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` [PATCH v2 05/11] dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng [this message]
2019-06-11 14:09 ` [PATCH v2 06/11] clk: sunxi-ng: v3s: add Allwinner V3 support Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` [PATCH v2 07/11] dt-bindings: vendor-prefixes: add SoChip Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` [PATCH v2 08/11] ARM: sunxi: dts: s3/s3l/v3: add DTSI files for S3/S3L/V3 SoCs Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` [PATCH v2 09/11] dt-bindings: vendor-prefixes: add Sipeed Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` [PATCH v2 10/11] dt-bindings: arm: sunxi: add binding for Lichee Zero Plus core board Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` [PATCH v2 11/11] ARM: dts: sun8i: s3: add devicetree for Lichee zero plus w/ S3 Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
2019-06-11 14:09 ` Icenowy Zheng
[not found] ` <20190611140940.14357-12-icenowy-h8G6r0blFSE@public.gmane.org>
2019-06-11 14:32 ` Maxime Ripard
2019-06-11 14:32 ` Maxime Ripard
2019-06-11 14:32 ` Maxime Ripard
2019-06-12 12:14 ` [PATCH v2 00/11] Support for Allwinner V3/S3L and Sochip S3 Linus Walleij
2019-06-12 12:14 ` Linus Walleij
2019-06-12 12:14 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190611140940.14357-7-icenowy@aosc.io \
--to=icenowy-h8g6r0blfse@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=wens-jdAy2FN1RRM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.