From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Philipp Tomsich
<philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>,
Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Subject: [PATCH v2 7/8] rockchip: rk3399: tpl: Mark printascii into debug
Date: Fri, 21 Jun 2019 00:25:05 +0530 [thread overview]
Message-ID: <20190620185506.11449-8-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190620185506.11449-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Now, we have spl_board_init which has TPL banner prints.
So mark the 'U-Boot TPL board init' print into debug.
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
arch/arm/mach-rockchip/rk3399-board-tpl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-rockchip/rk3399-board-tpl.c b/arch/arm/mach-rockchip/rk3399-board-tpl.c
index 72d0dd914e..4a301249b4 100644
--- a/arch/arm/mach-rockchip/rk3399-board-tpl.c
+++ b/arch/arm/mach-rockchip/rk3399-board-tpl.c
@@ -47,7 +47,7 @@ void board_init_f(ulong dummy)
* printhex8(0x1234);
* printascii("string");
*/
- printascii("U-Boot TPL board init\n");
+ debug("U-Boot TPL board init\n");
#endif
ret = spl_early_init();
if (ret) {
--
2.18.0.321.gffc6fa0e3
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 7/8] rockchip: rk3399: tpl: Mark printascii into debug
Date: Fri, 21 Jun 2019 00:25:05 +0530 [thread overview]
Message-ID: <20190620185506.11449-8-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190620185506.11449-1-jagan@amarulasolutions.com>
Now, we have spl_board_init which has TPL banner prints.
So mark the 'U-Boot TPL board init' print into debug.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-rockchip/rk3399-board-tpl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-rockchip/rk3399-board-tpl.c b/arch/arm/mach-rockchip/rk3399-board-tpl.c
index 72d0dd914e..4a301249b4 100644
--- a/arch/arm/mach-rockchip/rk3399-board-tpl.c
+++ b/arch/arm/mach-rockchip/rk3399-board-tpl.c
@@ -47,7 +47,7 @@ void board_init_f(ulong dummy)
* printhex8(0x1234);
* printascii("string");
*/
- printascii("U-Boot TPL board init\n");
+ debug("U-Boot TPL board init\n");
#endif
ret = spl_early_init();
if (ret) {
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-06-20 18:55 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-20 18:54 [PATCH v2 0/8] rockchip: rk3399: Use spl_board_init in SPL, TPL Jagan Teki
2019-06-20 18:54 ` [U-Boot] " Jagan Teki
[not found] ` <20190620185506.11449-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-06-20 18:54 ` [PATCH v2 1/8] board: rk3399: Drop explicit uart enablement in spl_board_init Jagan Teki
2019-06-20 18:54 ` [U-Boot] " Jagan Teki
2019-06-22 13:45 ` Kever Yang
2019-06-22 13:45 ` [U-Boot] " Kever Yang
2019-06-20 18:55 ` [PATCH v2 2/8] rockchip: rk3399: Support common spl_board_init Jagan Teki
2019-06-20 18:55 ` [U-Boot] " Jagan Teki
2019-06-22 13:47 ` Kever Yang
2019-06-22 13:47 ` [U-Boot] " Kever Yang
2019-11-28 4:30 ` Vasily Khoruzhick
2019-11-28 4:30 ` [U-Boot] " Vasily Khoruzhick
2019-06-20 18:55 ` [PATCH v2 3/8] rockchip: rk3399: spl: Mark printascii into debug Jagan Teki
2019-06-20 18:55 ` [U-Boot] " Jagan Teki
[not found] ` <20190620185506.11449-4-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-06-22 13:47 ` Kever Yang
2019-06-22 13:47 ` [U-Boot] " Kever Yang
2019-06-20 18:55 ` [PATCH v2 4/8] rockchip: rk3399: Move u-boot, dm-pre-reloc of uart0, uart2 Jagan Teki
2019-06-20 18:55 ` [U-Boot] " Jagan Teki
[not found] ` <20190620185506.11449-5-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-06-22 13:48 ` Kever Yang
2019-06-22 13:48 ` [U-Boot] " Kever Yang
2019-06-20 18:55 ` [PATCH v2 5/8] rockchip: rk3399: Enable SPL_BOARD_INIT Jagan Teki
2019-06-20 18:55 ` [U-Boot] " Jagan Teki
2019-06-22 13:49 ` Kever Yang
2019-06-22 13:49 ` [U-Boot] " Kever Yang
2019-06-20 18:55 ` [PATCH v2 6/8] rockchip: rk3399: tpl: Add spl_board_init Jagan Teki
2019-06-20 18:55 ` [U-Boot] " Jagan Teki
2019-06-22 13:50 ` Kever Yang
2019-06-22 13:50 ` [U-Boot] " Kever Yang
2019-06-20 18:55 ` Jagan Teki [this message]
2019-06-20 18:55 ` [U-Boot] [PATCH v2 7/8] rockchip: rk3399: tpl: Mark printascii into debug Jagan Teki
[not found] ` <20190620185506.11449-8-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-06-22 13:50 ` Kever Yang
2019-06-22 13:50 ` [U-Boot] " Kever Yang
2019-06-20 18:55 ` [PATCH v2 8/8] rockchip: rk3399: Enable TPL_BOARD_INIT Jagan Teki
2019-06-20 18:55 ` [U-Boot] " Jagan Teki
[not found] ` <20190620185506.11449-9-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-06-22 13:51 ` Kever Yang
2019-06-22 13:51 ` [U-Boot] " Kever Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190620185506.11449-8-jagan@amarulasolutions.com \
--to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \
--cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \
--cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.