Re: [Qemu-devel] [PATCH v17 07/10] ACPI: Add APEI GHES table generation support

From: Igor Mammedov <imammedo@redhat.com>
To: gengdongjiu <gengdongjiu@huawei.com>
Cc: peter.maydell@linaro.org, ehabkost@redhat.com,
	kvm@vger.kernel.org, mst@redhat.com, mtosatti@redhat.com,
	qemu-devel@nongnu.org, linuxarm@huawei.com,
	shannon.zhaosl@gmail.com, zhengxiang9@huawei.com,
	qemu-arm@nongnu.org, james.morse@arm.com, xuwei5@huawei.com,
	jonathan.cameron@huawei.com, pbonzini@redhat.com,
	lersek@redhat.com, rth@twiddle.net
Subject: Re: [Qemu-devel] [PATCH v17 07/10] ACPI: Add APEI GHES table generation support
Date: Wed, 26 Jun 2019 16:25:30 +0200	[thread overview]
Message-ID: <20190626162530.7bce148e@redhat.com> (raw)
In-Reply-To: <e7a30c5f-deca-2f1a-e8a5-db3ae760f5b1@huawei.com>

On Tue, 25 Jun 2019 21:48:07 +0800
gengdongjiu <gengdongjiu@huawei.com> wrote:

> On 2019/6/24 20:27, Igor Mammedov wrote:
> > On Tue, 14 May 2019 04:18:20 -0700
> > Dongjiu Geng <gengdongjiu@huawei.com> wrote:
> >   
> >> This implements APEI GHES Table generation via fw_cfg blobs.
> >> Now it only support GPIO-Signal and ARMv8 SEA two types of GHESv2 error
> >> source. Afterwards, we can extend the supported types if needed. For the
> >> CPER section type, currently it is memory section because kernel
> >> mainly wants userspace to handle the memory errors.
> >>
> >> This patch follows the spec ACPI 6.2 to build the Hardware Error Source
> >> table, for the detailed information, please refer to document:
> >> docs/specs/acpi_hest_ghes.txt
> >>
> >> Suggested-by: Laszlo Ersek <lersek@redhat.com>
> >> Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
> >> ---
> >>  default-configs/arm-softmmu.mak |   1 +
> >>  hw/acpi/Kconfig                 |   4 +
> >>  hw/acpi/Makefile.objs           |   1 +
> >>  hw/acpi/acpi_ghes.c             | 171 ++++++++++++++++++++++++++++++++++++++++
> >>  hw/acpi/aml-build.c             |   2 +
> >>  hw/arm/virt-acpi-build.c        |  12 +++
> >>  include/hw/acpi/acpi_ghes.h     |  79 +++++++++++++++++++
> >>  include/hw/acpi/aml-build.h     |   1 +
> >>  8 files changed, 271 insertions(+)
> >>  create mode 100644 hw/acpi/acpi_ghes.c
> >>  create mode 100644 include/hw/acpi/acpi_ghes.h
> >>
> >> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> >> index 613d19a..7b33ae9 100644
> >> --- a/default-configs/arm-softmmu.mak
> >> +++ b/default-configs/arm-softmmu.mak
> >> @@ -160,3 +160,4 @@ CONFIG_MUSICPAL=y
> >>  
> >>  # for realview and versatilepb
> >>  CONFIG_LSI_SCSI_PCI=y
> >> +CONFIG_ACPI_APEI=y
> >> diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig
> >> index eca3bee..5228a4b 100644
> >> --- a/hw/acpi/Kconfig
> >> +++ b/hw/acpi/Kconfig
> >> @@ -23,6 +23,10 @@ config ACPI_NVDIMM
> >>      bool
> >>      depends on ACPI
> >>  
> >> +config ACPI_APEI
> >> +    bool
> >> +    depends on ACPI
> >> +
> >>  config ACPI_VMGENID
> >>      bool
> >>      default y
> >> diff --git a/hw/acpi/Makefile.objs b/hw/acpi/Makefile.objs
> >> index 2d46e37..5099ada 100644
> >> --- a/hw/acpi/Makefile.objs
> >> +++ b/hw/acpi/Makefile.objs
> >> @@ -6,6 +6,7 @@ common-obj-$(CONFIG_ACPI_MEMORY_HOTPLUG) += memory_hotplug.o
> >>  common-obj-$(CONFIG_ACPI_CPU_HOTPLUG) += cpu.o
> >>  common-obj-$(CONFIG_ACPI_NVDIMM) += nvdimm.o
> >>  common-obj-$(CONFIG_ACPI_VMGENID) += vmgenid.o
> >> +common-obj-$(CONFIG_ACPI_APEI) += acpi_ghes.o
> >>  common-obj-$(call lnot,$(CONFIG_ACPI_X86)) += acpi-stub.o
> >>  
> >>  common-obj-y += acpi_interface.o
> >> diff --git a/hw/acpi/acpi_ghes.c b/hw/acpi/acpi_ghes.c
> >> new file mode 100644
> >> index 0000000..d03e797
> >> --- /dev/null
> >> +++ b/hw/acpi/acpi_ghes.c
> >> @@ -0,0 +1,171 @@
> >> +/* Support for generating APEI tables and record CPER for Guests
> >> + *
> >> + * Copyright (C) 2017 HuaWei Corporation.
> >> + *
> >> + * Author: Dongjiu Geng <gengdongjiu@huawei.com>
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify
> >> + * it under the terms of the GNU General Public License as published by
> >> + * the Free Software Foundation; either version 2 of the License, or
> >> + * (at your option) any later version.
> >> +
> >> + * This program is distributed in the hope that it will be useful,
> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> >> + * GNU General Public License for more details.
> >> +
> >> + * You should have received a copy of the GNU General Public License along
> >> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> >> + */
> >> +
> >> +#include "qemu/osdep.h"
> >> +#include "hw/acpi/acpi.h"
> >> +#include "hw/acpi/aml-build.h"
> >> +#include "hw/acpi/acpi_ghes.h"
> >> +#include "hw/nvram/fw_cfg.h"
> >> +#include "sysemu/sysemu.h"
> >> +#include "qemu/error-report.h"
> >> +
> >> +/* Build table for the hardware error fw_cfg blob */
> >> +void build_hardware_error_table(GArray *hardware_errors, BIOSLinker *linker)
> >> +{
> >> +    int i;
> >> +
> >> +    /*
> >> +     * | +--------------------------+
> >> +     * | |    error_block_address   |
> >> +     * | |      ..........          |
> >> +     * | +--------------------------+
> >> +     * | |    read_ack_register     |
> >> +     * | |     ...........          |
> >> +     * | +--------------------------+
> >> +     * | |  Error Status Data Block |
> >> +     * | |      ........            |
> >> +     * | +--------------------------+
> >> +     */
> >> +
> >> +    /* Build error_block_address */
> >> +    build_append_int_noprefix((void *)hardware_errors, 0,
> >> +                    GHES_ADDRESS_SIZE * ACPI_HEST_ERROR_SOURCE_COUNT);  
> > read CODING_STYLE wrt indentation rules.  
>  thanks for the reminder.
> 
> >   
> >> +
> >> +    /* Build read_ack_register */
> >> +    for (i = 0; i < ACPI_HEST_ERROR_SOURCE_COUNT; i++)
> >> +        /* Initialize the value of read_ack_register to 1, so GHES can be
> >> +         * writeable in the first time  
> > where does this come from? a pointer to spec?  
> 
> It is come from "ACPI 6.2, Table 18-382 Generic Hardware Error Source version 2 (GHESv2) Structure", I will add a comment.
> QEMU init the read_ack_register to 1, guest will change it from 1 to 0 after acknowledges the error.
> 
> > 
> >   
> >> +         */
> >> +        build_append_int_noprefix((void *)hardware_errors, 1, GHES_ADDRESS_SIZE);
> >> +
> >> +     /* Build Error Status Data Block */
> >> +    build_append_int_noprefix((void *)hardware_errors, 0,
> >> +                    GHES_MAX_RAW_DATA_LENGTH * ACPI_HEST_ERROR_SOURCE_COUNT);
> >> +
> >> +    /* Allocate guest memory for the hardware error fw_cfg blob */
> >> +    bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE, hardware_errors,
> >> +                            1, false);
> >> +}
> >> +
> >> +/* Build Hardware Error Source Table */
> >> +void build_apei_hest(GArray *table_data, GArray *hardware_errors,
> >> +                                            BIOSLinker *linker)
> >> +{
> >> +    uint32_t i, error_status_block_offset, length = table_data->len;  
> > 
> > s/length/hest_start/  
> thanks for the suggestion.
> 
> >   
> >> +
> >> +    /* Reserve Hardware Error Source Table header size */
> >> +    acpi_data_push(table_data, sizeof(AcpiTableHeader));
> >> +
> >> +    /* Set the error source counts */  
> > s/.*/Error Source Count/
> > like it's in spec, the same for other field comments  
> ok, thanks for the suggestion.
> 
> >   
> >> +    build_append_int_noprefix(table_data, ACPI_HEST_ERROR_SOURCE_COUNT, 4);
> >> +
> >> +    for (i = 0; i < ACPI_HEST_ERROR_SOURCE_COUNT; i++) {
> >> +        /* Generic Hardware Error Source version 2(GHESv2 - Type 10)  
> >   
> >> +         */  
> > shouldn't it be on previous line?  
> yes, I will change it.
> 
> >   
> >> +        build_append_int_noprefix(table_data,
> >> +            ACPI_HEST_SOURCE_GENERIC_ERROR_V2, 2); /* type */
> >> +        build_append_int_noprefix(table_data, cpu_to_le16(i), 2); /* source id */  
> > you don't need cpu_to_le16(), build_append_int_noprefix() does it for you.  
> thanks for the reminder.
> 
> >   
> >> +        build_append_int_noprefix(table_data, 0xffff, 2); /* related source id */
> >> +        build_append_int_noprefix(table_data, 0, 1); /* flags */
> >> +
> >> +        build_append_int_noprefix(table_data, 1, 1); /* enabled */
> >> +
> >> +        /* Number of Records To Pre-allocate */
> >> +        build_append_int_noprefix(table_data, 1, 4);
> >> +        /* Max Sections Per Record */
> >> +        build_append_int_noprefix(table_data, 1, 4);
> >> +        /* Max Raw Data Length */
> >> +        build_append_int_noprefix(table_data, GHES_MAX_RAW_DATA_LENGTH, 4);
> >> +
> >> +        /* Build error status address*/
> >> +        build_append_gas(table_data, AML_SYSTEM_MEMORY, 0x40, 0, 4 /* QWord access */, 0);
> >> +        bios_linker_loader_add_pointer(linker,
> >> +            ACPI_BUILD_TABLE_FILE, ERROR_STATUS_ADDRESS_OFFSET(length, i),
> >> +            GHES_ADDRESS_SIZE, GHES_ERRORS_FW_CFG_FILE, i * GHES_ADDRESS_SIZE);
> >> +  
> >   
> >> +        /* Build Hardware Error Notification
> >> +         * Now only enable GPIO-Signal and ARMv8 SEA notification types
> >> +         */
> >> +        if (i == 0) {
> >> +            build_append_ghes_notify(table_data, ACPI_HEST_NOTIFY_GPIO, 28,
> >> +                                     0, 0, 0, 0, 0, 0, 0);
> >> +        } else if (i == 1) {
> >> +            build_append_ghes_notify(table_data, ACPI_HEST_NOTIFY_SEA, 28, 0,
> >> +                                     0, 0, 0, 0, 0, 0);
> >> +        }  
> > well, if we increase  ACPI_HEST_ERROR_SOURCE_COUNT,
> > this will silently break and build invalid tables.
> > 
> > suggest to put g_assert_not_reached() here  
> ok, thanks.
> 
> > 
> >   
> >> +
> >> +        /* Error Status Block Length */
> >> +        build_append_int_noprefix(table_data,
> >> +            cpu_to_le32(GHES_MAX_RAW_DATA_LENGTH), 4);  
> > s/cpu_to_le32//  
> I will remove.
> 
> >   
> >> +
> >> +        /* Build Read ACK register
> >> +         * ACPI 6.1/6.2: 18.3.2.8 Generic Hardware Error Source
> >> +         * version 2 (GHESv2 - Type 10)
> >> +         */
> >> +        build_append_gas(table_data, AML_SYSTEM_MEMORY, 0x40, 0, 4 /* QWord access */, 0);
> >> +        bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
> >> +            READ_ACK_REGISTER_ADDRESS_OFFSET(length, i), GHES_ADDRESS_SIZE,
> >> +            GHES_ERRORS_FW_CFG_FILE,
> >> +            (ACPI_HEST_ERROR_SOURCE_COUNT + i) * GHES_ADDRESS_SIZE);
> >> +
> >> +        /* Build Read Ack Preserve and Read Ack Writer */  
> >   
> >> +        build_append_int_noprefix(table_data, cpu_to_le64(ReadAckPreserve), 8);
> >> +        build_append_int_noprefix(table_data, cpu_to_le64(ReadAckWrite), 8);  
> > s/cpu_to_le64/  
> I will remove.
> 
> > 
> > it's recurring mistake on many patches, pls fix it where it's made. I won't comment on it anymore  
> got it.
> 
> >   
> >> +    }
> >> +  
> > 
> > it looks like below part belongs to build_hardware_error_table()  
> 
> Below part mainly setup "Error Status Address" and "Read Ack Register"in the "ACPI 6.2: Table 18-382 Generic Hardware Error Source version 2 (GHESv2) Structure"
> Maybe it is better belong to build_apei_hest().

it deals with only GHES_ERRORS_FW_CFG_FILE which is populated in
build_hardware_error_table(). I don't really see anything there that belongs to
more generic build_apei_hest(), so it should go to build_hardware_error_table() if possible

> 
> >> +    /* Generic Error Status Block offset in the hardware error fw_cfg blob */
> >> +    error_status_block_offset = GHES_ADDRESS_SIZE * 2 *
> >> +                                ACPI_HEST_ERROR_SOURCE_COUNT;
> >> +
> >> +    for (i = 0; i < ACPI_HEST_ERROR_SOURCE_COUNT; i++)  
> > try to check patches with checkpatch before posting
> > and see CODING_STYLE 4. Block structure  
> ok, thanks.
> 
> >   
> >> +        /* Patch address of Error Status Data Block into
> >> +         * the error_block_address of hardware_errors fw_cfg blob
> >> +         */
> >> +        bios_linker_loader_add_pointer(linker,
> >> +            GHES_ERRORS_FW_CFG_FILE, GHES_ADDRESS_SIZE * i, GHES_ADDRESS_SIZE,
> >> +            GHES_ERRORS_FW_CFG_FILE,
> >> +            error_status_block_offset + i * GHES_MAX_RAW_DATA_LENGTH);
> >> +  
> > 
> > 
> >   
> >> +    /* write address of hardware_errors fw_cfg blob into the
> >> +     * hardware_errors_addr fw_cfg blob.
> >> +     */
> >> +    bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE,
> >> +        0, GHES_ADDRESS_SIZE, GHES_ERRORS_FW_CFG_FILE, 0);
> >> +
> >> +    build_header(linker, table_data,
> >> +        (void *)(table_data->data + length), "HEST",
> >> +        table_data->len - length, 1, NULL, "GHES");
> >> +}
> >> +
> >> +static GhesState ges;
> >> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error)
> >> +{
> >> +
> >> +    size_t size = 2 * GHES_ADDRESS_SIZE + GHES_MAX_RAW_DATA_LENGTH;
> >> +    size_t request_block_size = ACPI_HEST_ERROR_SOURCE_COUNT * size;
> >> +
> >> +    /* Create a read-only fw_cfg file for GHES */
> >> +    fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
> >> +                    request_block_size);
> >> +
> >> +    /* Create a read-write fw_cfg file for Address */
> >> +    fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL, NULL,
> >> +        &ges.ghes_addr_le, sizeof(ges.ghes_addr_le), false);
> >> +}
> >> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
> >> index ce90970..3f2b84f 100644
> >> --- a/hw/acpi/aml-build.c
> >> +++ b/hw/acpi/aml-build.c
> >> @@ -1645,6 +1645,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables)
> >>      tables->table_data = g_array_new(false, true /* clear */, 1);
> >>      tables->tcpalog = g_array_new(false, true /* clear */, 1);
> >>      tables->vmgenid = g_array_new(false, true /* clear */, 1);
> >> +    tables->hardware_errors = g_array_new(false, true /* clear */, 1);
> >>      tables->linker = bios_linker_loader_init();
> >>  }
> >>  
> >> @@ -1655,6 +1656,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre)
> >>      g_array_free(tables->table_data, true);
> >>      g_array_free(tables->tcpalog, mfre);
> >>      g_array_free(tables->vmgenid, mfre);
> >> +    g_array_free(tables->hardware_errors, mfre);
> >>  }
> >>  
> >>  /*
> >> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> >> index bf9c0bc..54f4ba5 100644
> >> --- a/hw/arm/virt-acpi-build.c
> >> +++ b/hw/arm/virt-acpi-build.c
> >> @@ -45,6 +45,7 @@
> >>  #include "hw/arm/virt.h"
> >>  #include "sysemu/numa.h"
> >>  #include "kvm_arm.h"
> >> +#include "hw/acpi/acpi_ghes.h"
> >>  
> >>  #define ARM_SPI_BASE 32
> >>  #define ACPI_POWER_BUTTON_DEVICE "PWRB"
> >> @@ -808,6 +809,12 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
> >>      acpi_add_table(table_offsets, tables_blob);
> >>      build_spcr(tables_blob, tables->linker, vms);
> >>  
> >> +    if (!vmc->no_ras) {
> >> +        acpi_add_table(table_offsets, tables_blob);
> >> +        build_hardware_error_table(tables->hardware_errors, tables->linker);
> >> +        build_apei_hest(tables_blob, tables->hardware_errors, tables->linker);
> >> +    }
> >> +
> >>      if (nb_numa_nodes > 0) {
> >>          acpi_add_table(table_offsets, tables_blob);
> >>          build_srat(tables_blob, tables->linker, vms);
> >> @@ -901,6 +908,7 @@ static const VMStateDescription vmstate_virt_acpi_build = {
> >>  
> >>  void virt_acpi_setup(VirtMachineState *vms)
> >>  {
> >> +    VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms);
> >>      AcpiBuildTables tables;
> >>      AcpiBuildState *build_state;
> >>  
> >> @@ -932,6 +940,10 @@ void virt_acpi_setup(VirtMachineState *vms)
> >>      fw_cfg_add_file(vms->fw_cfg, ACPI_BUILD_TPMLOG_FILE, tables.tcpalog->data,
> >>                      acpi_data_len(tables.tcpalog));
> >>  
> >> +    if (!vmc->no_ras) {
> >> +        ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors);
> >> +    }
> >> +
> >>      build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp,
> >>                                                ACPI_BUILD_RSDP_FILE, 0);
> >>  
> >> diff --git a/include/hw/acpi/acpi_ghes.h b/include/hw/acpi/acpi_ghes.h
> >> new file mode 100644
> >> index 0000000..38fd87c
> >> --- /dev/null
> >> +++ b/include/hw/acpi/acpi_ghes.h
> >> @@ -0,0 +1,79 @@
> >> +/* Support for generating APEI tables and record CPER for Guests
> >> + *
> >> + * Copyright (C) 2017 HuaWei Corporation.
> >> + *
> >> + * Author: Dongjiu Geng <gengdongjiu@huawei.com>
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify
> >> + * it under the terms of the GNU General Public License as published by
> >> + * the Free Software Foundation; either version 2 of the License, or
> >> + * (at your option) any later version.
> >> +
> >> + * This program is distributed in the hope that it will be useful,
> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> >> + * GNU General Public License for more details.
> >> +
> >> + * You should have received a copy of the GNU General Public License along
> >> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> >> + */
> >> +
> >> +#ifndef ACPI_GHES_H
> >> +#define ACPI_GHES_H
> >> +
> >> +#include "hw/acpi/bios-linker-loader.h"
> >> +
> >> +#define GHES_ERRORS_FW_CFG_FILE         "etc/hardware_errors"
> >> +#define GHES_DATA_ADDR_FW_CFG_FILE      "etc/hardware_errors_addr"
> >> +
> >> +/* The size of Address field in Generic Address Structure,
> >> + * ACPI 2.0/3.0: 5.2.3.1 Generic Address Structure.
> >> + */
> >> +#define GHES_ADDRESS_SIZE           8
> >> +  
> >   
> >> +#define GHES_DATA_LENGTH            72
> >> +#define GHES_CPER_LENGTH            80  
> > add the similar comment as above if values come from spec
> > or an explanation where values come from  
>   got it.
> 
> >   
> >> +
> >> +#define ReadAckPreserve             0xfffffffe
> >> +#define ReadAckWrite                0x1  
> > ditto, and macro should be uppercased.  
> I will move above macros and folow Michael's comments to  just open-coding at use point
> and adding a comment:
> 
>         build_append_int_noprefix(table_data, cpu_to_le64(0xfffffffe), 8); /* ReadAckPreserve */
>         build_append_int_noprefix(table_data, cpu_to_le64(0x1), 8); /* ReadAckWrite */
> > 
> >   
> >> +
> >> +/* The max size in bytes for one error block */
> >> +#define GHES_MAX_RAW_DATA_LENGTH        0x1000
> >> +/* Now only have GPIO-Signal and ARMv8 SEA notification types error sources
> >> + */
> >> +#define ACPI_HEST_ERROR_SOURCE_COUNT    2
> >> +
> >> +/*
> >> + * | +--------------------------+ 0
> >> + * | |        Header            |
> >> + * | +--------------------------+ 40---+-
> >> + * | | .................        |      |
> >> + * | | error_status_address-----+ 60   |
> >> + * | | .................        |      |
> >> + * | | read_ack_register--------+ 104  92
> >> + * | | read_ack_preserve        |      |
> >> + * | | read_ack_write           |      |
> >> + * + +--------------------------+ 132--+-
> >> + *
> >> + * From above GHES definition, the error status address offset is 60;
> >> + * the Read ack register offset is 104, the whole size of GHESv2 is 92
> >> + */
> >> +
> >> +/* The error status address offset in GHES */
> >> +#define ERROR_STATUS_ADDRESS_OFFSET(start_addr, n)     (start_addr + 60 + \
> >> +                    offsetof(struct AcpiGenericAddress, address) + n * 92)
> >> +
> >> +/* The read Ack register offset in GHES */
> >> +#define READ_ACK_REGISTER_ADDRESS_OFFSET(start_addr, n) (start_addr + 104 + \
> >> +                    offsetof(struct AcpiGenericAddress, address) + n * 92)
> >> +
> >> +typedef struct GhesState {
> >> +    uint64_t ghes_addr_le;
> >> +} GhesState;
> >> +
> >> +void build_apei_hest(GArray *table_data, GArray *hardware_error,
> >> +                     BIOSLinker *linker);
> >> +
> >> +void build_hardware_error_table(GArray *hardware_errors, BIOSLinker *linker);
> >> +void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_errors);
> >> +#endif
> >> diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
> >> index 1ec7e1b..78c0252 100644
> >> --- a/include/hw/acpi/aml-build.h
> >> +++ b/include/hw/acpi/aml-build.h
> >> @@ -220,6 +220,7 @@ struct AcpiBuildTables {
> >>      GArray *rsdp;
> >>      GArray *tcpalog;
> >>      GArray *vmgenid;
> >> +    GArray *hardware_errors;
> >>      BIOSLinker *linker;
> >>  } AcpiBuildTables;
> >>    
> > 
> > .
> >   
> 
> 