From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: Maxime Ripard <maxime.ripard@bootlin.com>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
Sean Paul <sean@poorly.run>
Subject: [PATCH 50/60] drm/omap: displays: Remove unused panel drivers
Date: Sun, 7 Jul 2019 21:19:27 +0300 [thread overview]
Message-ID: <20190707181937.6250-47-laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <20190707181937.6250-1-laurent.pinchart@ideasonboard.com>
drm_panel-based drivers for the ACX565AKM, LB035Q02, LS037V7DW01,
NL8048HL11, TD028TTEC1 and TD043MTEA1 are available, remove the
omapdrm-specific drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
drivers/gpu/drm/omapdrm/displays/Kconfig | 38 -
drivers/gpu/drm/omapdrm/displays/Makefile | 6 -
.../displays/panel-lgphilips-lb035q02.c | 254 ------
.../omapdrm/displays/panel-nec-nl8048hl11.c | 271 -------
.../displays/panel-sharp-ls037v7dw01.c | 265 ------
.../omapdrm/displays/panel-sony-acx565akm.c | 766 ------------------
.../omapdrm/displays/panel-tpo-td028ttec1.c | 401 ---------
.../omapdrm/displays/panel-tpo-td043mtea1.c | 513 ------------
.../gpu/drm/omapdrm/dss/omapdss-boot-init.c | 7 -
9 files changed, 2521 deletions(-)
delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
diff --git a/drivers/gpu/drm/omapdrm/displays/Kconfig b/drivers/gpu/drm/omapdrm/displays/Kconfig
index bb73d49fc3e0..f2be594c7eff 100644
--- a/drivers/gpu/drm/omapdrm/displays/Kconfig
+++ b/drivers/gpu/drm/omapdrm/displays/Kconfig
@@ -7,42 +7,4 @@ config DRM_OMAP_PANEL_DSI_CM
help
Driver for generic DSI command mode panels.
-config DRM_OMAP_PANEL_SONY_ACX565AKM
- tristate "ACX565AKM Panel"
- depends on SPI && BACKLIGHT_CLASS_DEVICE
- help
- This is the LCD panel used on Nokia N900
-
-config DRM_OMAP_PANEL_LGPHILIPS_LB035Q02
- tristate "LG.Philips LB035Q02 LCD Panel"
- depends on SPI
- help
- LCD Panel used on the Gumstix Overo Palo35
-
-config DRM_OMAP_PANEL_SHARP_LS037V7DW01
- tristate "Sharp LS037V7DW01 LCD Panel"
- depends on BACKLIGHT_CLASS_DEVICE
- help
- LCD Panel used in TI's SDP3430 and EVM boards
-
-config DRM_OMAP_PANEL_TPO_TD028TTEC1
- tristate "TPO TD028TTEC1 LCD Panel"
- depends on SPI
- help
- LCD panel used in Openmoko.
-
-config DRM_OMAP_PANEL_TPO_TD043MTEA1
- tristate "TPO TD043MTEA1 LCD Panel"
- depends on SPI
- help
- LCD Panel used in OMAP3 Pandora
-
-config DRM_OMAP_PANEL_NEC_NL8048HL11
- tristate "NEC NL8048HL11 Panel"
- depends on SPI
- depends on BACKLIGHT_CLASS_DEVICE
- help
- This NEC NL8048HL11 panel is TFT LCD used in the
- Zoom2/3/3630 sdp boards.
-
endmenu
diff --git a/drivers/gpu/drm/omapdrm/displays/Makefile b/drivers/gpu/drm/omapdrm/displays/Makefile
index 58ddfa9917f8..488ddf153613 100644
--- a/drivers/gpu/drm/omapdrm/displays/Makefile
+++ b/drivers/gpu/drm/omapdrm/displays/Makefile
@@ -1,8 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_DRM_OMAP_PANEL_DSI_CM) += panel-dsi-cm.o
-obj-$(CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
-obj-$(CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
-obj-$(CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
-obj-$(CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
-obj-$(CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
-obj-$(CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c b/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
deleted file mode 100644
index 51eb98e96cde..000000000000
--- a/drivers/gpu/drm/omapdrm/displays/panel-lgphilips-lb035q02.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * LG.Philips LB035Q02 LCD Panel driver
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- * Based on a driver by: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/mutex.h>
-#include <linux/gpio.h>
-#include <linux/gpio/consumer.h>
-
-#include "../dss/omapdss.h"
-
-static const struct videomode lb035q02_vm = {
- .hactive = 320,
- .vactive = 240,
-
- .pixelclock = 6500000,
-
- .hsync_len = 2,
- .hfront_porch = 20,
- .hback_porch = 68,
-
- .vsync_len = 2,
- .vfront_porch = 4,
- .vback_porch = 18,
-
- .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
-};
-
-struct panel_drv_data {
- struct omap_dss_device dssdev;
-
- struct spi_device *spi;
-
- struct videomode vm;
-
- struct gpio_desc *enable_gpio;
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val)
-{
- struct spi_message msg;
- struct spi_transfer index_xfer = {
- .len = 3,
- .cs_change = 1,
- };
- struct spi_transfer value_xfer = {
- .len = 3,
- };
- u8 buffer[16];
-
- spi_message_init(&msg);
-
- /* register index */
- buffer[0] = 0x70;
- buffer[1] = 0x00;
- buffer[2] = reg & 0x7f;
- index_xfer.tx_buf = buffer;
- spi_message_add_tail(&index_xfer, &msg);
-
- /* register value */
- buffer[4] = 0x72;
- buffer[5] = val >> 8;
- buffer[6] = val;
- value_xfer.tx_buf = buffer + 4;
- spi_message_add_tail(&value_xfer, &msg);
-
- return spi_sync(spi, &msg);
-}
-
-static void init_lb035q02_panel(struct spi_device *spi)
-{
- /* Init sequence from page 28 of the lb035q02 spec */
- lb035q02_write_reg(spi, 0x01, 0x6300);
- lb035q02_write_reg(spi, 0x02, 0x0200);
- lb035q02_write_reg(spi, 0x03, 0x0177);
- lb035q02_write_reg(spi, 0x04, 0x04c7);
- lb035q02_write_reg(spi, 0x05, 0xffc0);
- lb035q02_write_reg(spi, 0x06, 0xe806);
- lb035q02_write_reg(spi, 0x0a, 0x4008);
- lb035q02_write_reg(spi, 0x0b, 0x0000);
- lb035q02_write_reg(spi, 0x0d, 0x0030);
- lb035q02_write_reg(spi, 0x0e, 0x2800);
- lb035q02_write_reg(spi, 0x0f, 0x0000);
- lb035q02_write_reg(spi, 0x16, 0x9f80);
- lb035q02_write_reg(spi, 0x17, 0x0a0f);
- lb035q02_write_reg(spi, 0x1e, 0x00c1);
- lb035q02_write_reg(spi, 0x30, 0x0300);
- lb035q02_write_reg(spi, 0x31, 0x0007);
- lb035q02_write_reg(spi, 0x32, 0x0000);
- lb035q02_write_reg(spi, 0x33, 0x0000);
- lb035q02_write_reg(spi, 0x34, 0x0707);
- lb035q02_write_reg(spi, 0x35, 0x0004);
- lb035q02_write_reg(spi, 0x36, 0x0302);
- lb035q02_write_reg(spi, 0x37, 0x0202);
- lb035q02_write_reg(spi, 0x3a, 0x0a0d);
- lb035q02_write_reg(spi, 0x3b, 0x0806);
-}
-
-static int lb035q02_connect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
- struct panel_drv_data *ddata = to_panel_data(dst);
-
- init_lb035q02_panel(ddata->spi);
-
- return 0;
-}
-
-static void lb035q02_disconnect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
-}
-
-static void lb035q02_enable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- if (ddata->enable_gpio)
- gpiod_set_value_cansleep(ddata->enable_gpio, 1);
-}
-
-static void lb035q02_disable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- if (ddata->enable_gpio)
- gpiod_set_value_cansleep(ddata->enable_gpio, 0);
-}
-
-static int lb035q02_get_modes(struct omap_dss_device *dssdev,
- struct drm_connector *connector)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- return omapdss_display_get_modes(connector, &ddata->vm);
-}
-
-static const struct omap_dss_device_ops lb035q02_ops = {
- .connect = lb035q02_connect,
- .disconnect = lb035q02_disconnect,
-
- .enable = lb035q02_enable,
- .disable = lb035q02_disable,
-
- .get_modes = lb035q02_get_modes,
-};
-
-static int lb035q02_probe_of(struct spi_device *spi)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
- struct gpio_desc *gpio;
-
- gpio = devm_gpiod_get(&spi->dev, "enable", GPIOD_OUT_LOW);
- if (IS_ERR(gpio)) {
- dev_err(&spi->dev, "failed to parse enable gpio\n");
- return PTR_ERR(gpio);
- }
-
- ddata->enable_gpio = gpio;
-
- return 0;
-}
-
-static int lb035q02_panel_spi_probe(struct spi_device *spi)
-{
- struct panel_drv_data *ddata;
- struct omap_dss_device *dssdev;
- int r;
-
- ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
- if (ddata == NULL)
- return -ENOMEM;
-
- dev_set_drvdata(&spi->dev, ddata);
-
- ddata->spi = spi;
-
- r = lb035q02_probe_of(spi);
- if (r)
- return r;
-
- ddata->vm = lb035q02_vm;
-
- dssdev = &ddata->dssdev;
- dssdev->dev = &spi->dev;
- dssdev->ops = &lb035q02_ops;
- dssdev->type = OMAP_DISPLAY_TYPE_DPI;
- dssdev->display = true;
- dssdev->owner = THIS_MODULE;
- dssdev->of_port = 0;
- dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
-
- /*
- * Note: According to the panel documentation:
- * DE is active LOW
- * DATA needs to be driven on the FALLING edge
- */
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
- | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
- | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
-
- omapdss_display_init(dssdev);
- omapdss_device_register(dssdev);
-
- return 0;
-}
-
-static int lb035q02_panel_spi_remove(struct spi_device *spi)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
- struct omap_dss_device *dssdev = &ddata->dssdev;
-
- omapdss_device_unregister(dssdev);
-
- lb035q02_disable(dssdev);
-
- return 0;
-}
-
-static const struct of_device_id lb035q02_of_match[] = {
- { .compatible = "omapdss,lgphilips,lb035q02", },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, lb035q02_of_match);
-
-static struct spi_driver lb035q02_spi_driver = {
- .probe = lb035q02_panel_spi_probe,
- .remove = lb035q02_panel_spi_remove,
- .driver = {
- .name = "panel_lgphilips_lb035q02",
- .of_match_table = lb035q02_of_match,
- .suppress_bind_attrs = true,
- },
-};
-
-module_spi_driver(lb035q02_spi_driver);
-
-MODULE_ALIAS("spi:lgphilips,lb035q02");
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c b/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
deleted file mode 100644
index ebde3f6f670e..000000000000
--- a/drivers/gpu/drm/omapdrm/displays/panel-nec-nl8048hl11.c
+++ /dev/null
@@ -1,271 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * NEC NL8048HL11 Panel driver
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- * Author: Erik Gilling <konkers@android.com>
- * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
- */
-
-#include <linux/delay.h>
-#include <linux/gpio/consumer.h>
-#include <linux/module.h>
-#include <linux/spi/spi.h>
-
-#include "../dss/omapdss.h"
-
-struct panel_drv_data {
- struct omap_dss_device dssdev;
-
- struct videomode vm;
-
- struct gpio_desc *res_gpio;
-
- struct spi_device *spi;
-};
-
-#define LCD_XRES 800
-#define LCD_YRES 480
-/*
- * NEC PIX Clock Ratings
- * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
- */
-#define LCD_PIXEL_CLOCK 23800000
-
-static const struct {
- unsigned char addr;
- unsigned char dat;
-} nec_8048_init_seq[] = {
- { 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 },
- { 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 },
- { 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 }, { 24, 0x25 },
- { 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F },
- { 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F }, { 38, 0x0F },
- { 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 }, { 43, 0x0F },
- { 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F }, { 48, 0x0F },
- { 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
- { 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 }, { 86, 0x14 },
- { 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 }, { 93, 0x0C },
- { 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 },
- { 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 },
- { 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 },
- { 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 },
- { 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC },
- { 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 },
- { 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 },
- { 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 },
-};
-
-static const struct videomode nec_8048_panel_vm = {
- .hactive = LCD_XRES,
- .vactive = LCD_YRES,
- .pixelclock = LCD_PIXEL_CLOCK,
- .hfront_porch = 6,
- .hsync_len = 1,
- .hback_porch = 4,
- .vfront_porch = 3,
- .vsync_len = 1,
- .vback_porch = 4,
-
- .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr,
- unsigned char reg_data)
-{
- int ret = 0;
- unsigned int cmd = 0, data = 0;
-
- cmd = 0x0000 | reg_addr; /* register address write */
- data = 0x0100 | reg_data; /* register data write */
- data = (cmd << 16) | data;
-
- ret = spi_write(spi, (unsigned char *)&data, 4);
- if (ret)
- pr_err("error in spi_write %x\n", data);
-
- return ret;
-}
-
-static int init_nec_8048_wvga_lcd(struct spi_device *spi)
-{
- unsigned int i;
- /* Initialization Sequence */
- /* nec_8048_spi_send(spi, REG, VAL) */
- for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++)
- nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
- nec_8048_init_seq[i].dat);
- udelay(20);
- nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
- nec_8048_init_seq[i].dat);
- return 0;
-}
-
-static int nec_8048_connect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
- return 0;
-}
-
-static void nec_8048_disconnect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
-}
-
-static void nec_8048_enable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- gpiod_set_value_cansleep(ddata->res_gpio, 1);
-}
-
-static void nec_8048_disable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- gpiod_set_value_cansleep(ddata->res_gpio, 0);
-}
-
-static int nec_8048_get_modes(struct omap_dss_device *dssdev,
- struct drm_connector *connector)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- return omapdss_display_get_modes(connector, &ddata->vm);
-}
-
-static const struct omap_dss_device_ops nec_8048_ops = {
- .connect = nec_8048_connect,
- .disconnect = nec_8048_disconnect,
-
- .enable = nec_8048_enable,
- .disable = nec_8048_disable,
-
- .get_modes = nec_8048_get_modes,
-};
-
-static int nec_8048_probe(struct spi_device *spi)
-{
- struct panel_drv_data *ddata;
- struct omap_dss_device *dssdev;
- struct gpio_desc *gpio;
- int r;
-
- dev_dbg(&spi->dev, "%s\n", __func__);
-
- spi->mode = SPI_MODE_0;
- spi->bits_per_word = 32;
-
- r = spi_setup(spi);
- if (r < 0) {
- dev_err(&spi->dev, "spi_setup failed: %d\n", r);
- return r;
- }
-
- init_nec_8048_wvga_lcd(spi);
-
- ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
- if (ddata == NULL)
- return -ENOMEM;
-
- dev_set_drvdata(&spi->dev, ddata);
-
- ddata->spi = spi;
-
- gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(gpio)) {
- dev_err(&spi->dev, "failed to get reset gpio\n");
- return PTR_ERR(gpio);
- }
-
- ddata->res_gpio = gpio;
-
- ddata->vm = nec_8048_panel_vm;
-
- dssdev = &ddata->dssdev;
- dssdev->dev = &spi->dev;
- dssdev->ops = &nec_8048_ops;
- dssdev->type = OMAP_DISPLAY_TYPE_DPI;
- dssdev->display = true;
- dssdev->owner = THIS_MODULE;
- dssdev->of_port = 0;
- dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
- | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
- | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
-
- omapdss_display_init(dssdev);
- omapdss_device_register(dssdev);
-
- return 0;
-}
-
-static int nec_8048_remove(struct spi_device *spi)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
- struct omap_dss_device *dssdev = &ddata->dssdev;
-
- dev_dbg(&ddata->spi->dev, "%s\n", __func__);
-
- omapdss_device_unregister(dssdev);
-
- nec_8048_disable(dssdev);
-
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int nec_8048_suspend(struct device *dev)
-{
- struct spi_device *spi = to_spi_device(dev);
-
- nec_8048_spi_send(spi, 2, 0x01);
- mdelay(40);
-
- return 0;
-}
-
-static int nec_8048_resume(struct device *dev)
-{
- struct spi_device *spi = to_spi_device(dev);
-
- /* reinitialize the panel */
- spi_setup(spi);
- nec_8048_spi_send(spi, 2, 0x00);
- init_nec_8048_wvga_lcd(spi);
-
- return 0;
-}
-static SIMPLE_DEV_PM_OPS(nec_8048_pm_ops, nec_8048_suspend,
- nec_8048_resume);
-#define NEC_8048_PM_OPS (&nec_8048_pm_ops)
-#else
-#define NEC_8048_PM_OPS NULL
-#endif
-
-static const struct of_device_id nec_8048_of_match[] = {
- { .compatible = "omapdss,nec,nl8048hl11", },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, nec_8048_of_match);
-
-static struct spi_driver nec_8048_driver = {
- .driver = {
- .name = "panel-nec-nl8048hl11",
- .pm = NEC_8048_PM_OPS,
- .of_match_table = nec_8048_of_match,
- .suppress_bind_attrs = true,
- },
- .probe = nec_8048_probe,
- .remove = nec_8048_remove,
-};
-
-module_spi_driver(nec_8048_driver);
-
-MODULE_ALIAS("spi:nec,nl8048hl11");
-MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
-MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c b/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
deleted file mode 100644
index 637eb64371d9..000000000000
--- a/drivers/gpu/drm/omapdrm/displays/panel-sharp-ls037v7dw01.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * LCD panel driver for Sharp LS037V7DW01
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio/consumer.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/regulator/consumer.h>
-
-#include "../dss/omapdss.h"
-
-struct panel_drv_data {
- struct omap_dss_device dssdev;
- struct regulator *vcc;
-
- struct videomode vm;
-
- struct gpio_desc *resb_gpio; /* low = reset active min 20 us */
- struct gpio_desc *ini_gpio; /* high = power on */
- struct gpio_desc *mo_gpio; /* low = 480x640, high = 240x320 */
- struct gpio_desc *lr_gpio; /* high = conventional horizontal scanning */
- struct gpio_desc *ud_gpio; /* high = conventional vertical scanning */
-};
-
-static const struct videomode sharp_ls_vm = {
- .hactive = 480,
- .vactive = 640,
-
- .pixelclock = 19200000,
-
- .hsync_len = 2,
- .hfront_porch = 1,
- .hback_porch = 28,
-
- .vsync_len = 1,
- .vfront_porch = 1,
- .vback_porch = 1,
-
- .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int sharp_ls_connect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
- return 0;
-}
-
-static void sharp_ls_disconnect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
-}
-
-static void sharp_ls_pre_enable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
- int r;
-
- if (ddata->vcc) {
- r = regulator_enable(ddata->vcc);
- if (r)
- dev_err(dssdev->dev, "%s: failed to enable regulator\n",
- __func__);
- }
-}
-
-static void sharp_ls_enable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- /* wait couple of vsyncs until enabling the LCD */
- msleep(50);
-
- if (ddata->resb_gpio)
- gpiod_set_value_cansleep(ddata->resb_gpio, 1);
-
- if (ddata->ini_gpio)
- gpiod_set_value_cansleep(ddata->ini_gpio, 1);
-}
-
-static void sharp_ls_disable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- if (ddata->ini_gpio)
- gpiod_set_value_cansleep(ddata->ini_gpio, 0);
-
- if (ddata->resb_gpio)
- gpiod_set_value_cansleep(ddata->resb_gpio, 0);
-
- /* wait at least 5 vsyncs after disabling the LCD */
- msleep(100);
-}
-
-static void sharp_ls_post_disable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- if (ddata->vcc)
- regulator_disable(ddata->vcc);
-}
-
-static int sharp_ls_get_modes(struct omap_dss_device *dssdev,
- struct drm_connector *connector)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- return omapdss_display_get_modes(connector, &ddata->vm);
-}
-
-static const struct omap_dss_device_ops sharp_ls_ops = {
- .connect = sharp_ls_connect,
- .disconnect = sharp_ls_disconnect,
-
- .pre_enable = sharp_ls_pre_enable,
- .enable = sharp_ls_enable,
- .disable = sharp_ls_disable,
- .post_disable = sharp_ls_post_disable,
-
- .get_modes = sharp_ls_get_modes,
-};
-
-static int sharp_ls_get_gpio_of(struct device *dev, int index, int val,
- const char *desc, struct gpio_desc **gpiod)
-{
- struct gpio_desc *gd;
-
- *gpiod = NULL;
-
- gd = devm_gpiod_get_index(dev, desc, index, GPIOD_OUT_LOW);
- if (IS_ERR(gd))
- return PTR_ERR(gd);
-
- *gpiod = gd;
- return 0;
-}
-
-static int sharp_ls_probe_of(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- int r;
-
- ddata->vcc = devm_regulator_get(&pdev->dev, "envdd");
- if (IS_ERR(ddata->vcc)) {
- dev_err(&pdev->dev, "failed to get regulator\n");
- return PTR_ERR(ddata->vcc);
- }
-
- /* lcd INI */
- r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "enable", &ddata->ini_gpio);
- if (r)
- return r;
-
- /* lcd RESB */
- r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "reset", &ddata->resb_gpio);
- if (r)
- return r;
-
- /* lcd MO */
- r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "mode", &ddata->mo_gpio);
- if (r)
- return r;
-
- /* lcd LR */
- r = sharp_ls_get_gpio_of(&pdev->dev, 1, 1, "mode", &ddata->lr_gpio);
- if (r)
- return r;
-
- /* lcd UD */
- r = sharp_ls_get_gpio_of(&pdev->dev, 2, 1, "mode", &ddata->ud_gpio);
- if (r)
- return r;
-
- return 0;
-}
-
-static int sharp_ls_probe(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata;
- struct omap_dss_device *dssdev;
- int r;
-
- ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
- if (ddata == NULL)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, ddata);
-
- r = sharp_ls_probe_of(pdev);
- if (r)
- return r;
-
- ddata->vm = sharp_ls_vm;
-
- dssdev = &ddata->dssdev;
- dssdev->dev = &pdev->dev;
- dssdev->ops = &sharp_ls_ops;
- dssdev->type = OMAP_DISPLAY_TYPE_DPI;
- dssdev->display = true;
- dssdev->owner = THIS_MODULE;
- dssdev->of_port = 0;
- dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
-
- /*
- * Note: According to the panel documentation:
- * DATA needs to be driven on the FALLING edge
- */
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
- | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
- | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
-
- omapdss_display_init(dssdev);
- omapdss_device_register(dssdev);
-
- return 0;
-}
-
-static int __exit sharp_ls_remove(struct platform_device *pdev)
-{
- struct panel_drv_data *ddata = platform_get_drvdata(pdev);
- struct omap_dss_device *dssdev = &ddata->dssdev;
-
- omapdss_device_unregister(dssdev);
-
- if (omapdss_device_is_enabled(dssdev)) {
- sharp_ls_disable(dssdev);
- sharp_ls_post_disable(dssdev);
- }
-
- return 0;
-}
-
-static const struct of_device_id sharp_ls_of_match[] = {
- { .compatible = "omapdss,sharp,ls037v7dw01", },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, sharp_ls_of_match);
-
-static struct platform_driver sharp_ls_driver = {
- .probe = sharp_ls_probe,
- .remove = __exit_p(sharp_ls_remove),
- .driver = {
- .name = "panel-sharp-ls037v7dw01",
- .of_match_table = sharp_ls_of_match,
- .suppress_bind_attrs = true,
- },
-};
-
-module_platform_driver(sharp_ls_driver);
-
-MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
-MODULE_DESCRIPTION("Sharp LS037V7DW01 Panel Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c b/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
deleted file mode 100644
index 67379f71bd88..000000000000
--- a/drivers/gpu/drm/omapdrm/displays/panel-sony-acx565akm.c
+++ /dev/null
@@ -1,766 +0,0 @@
-/*
- * Sony ACX565AKM LCD Panel driver
- *
- * Copyright (C) 2010 Nokia Corporation
- *
- * Original Driver Author: Imre Deak <imre.deak@nokia.com>
- * Based on panel-generic.c by Tomi Valkeinen <tomi.valkeinen@ti.com>
- * Adapted to new DSS2 framework: Roger Quadros <roger.quadros@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/backlight.h>
-#include <linux/delay.h>
-#include <linux/gpio/consumer.h>
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/spi/spi.h>
-
-#include "../dss/omapdss.h"
-
-#define MIPID_CMD_READ_DISP_ID 0x04
-#define MIPID_CMD_READ_RED 0x06
-#define MIPID_CMD_READ_GREEN 0x07
-#define MIPID_CMD_READ_BLUE 0x08
-#define MIPID_CMD_READ_DISP_STATUS 0x09
-#define MIPID_CMD_RDDSDR 0x0F
-#define MIPID_CMD_SLEEP_IN 0x10
-#define MIPID_CMD_SLEEP_OUT 0x11
-#define MIPID_CMD_DISP_OFF 0x28
-#define MIPID_CMD_DISP_ON 0x29
-#define MIPID_CMD_WRITE_DISP_BRIGHTNESS 0x51
-#define MIPID_CMD_READ_DISP_BRIGHTNESS 0x52
-#define MIPID_CMD_WRITE_CTRL_DISP 0x53
-
-#define CTRL_DISP_BRIGHTNESS_CTRL_ON (1 << 5)
-#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON (1 << 4)
-#define CTRL_DISP_BACKLIGHT_ON (1 << 2)
-#define CTRL_DISP_AUTO_BRIGHTNESS_ON (1 << 1)
-
-#define MIPID_CMD_READ_CTRL_DISP 0x54
-#define MIPID_CMD_WRITE_CABC 0x55
-#define MIPID_CMD_READ_CABC 0x56
-
-#define MIPID_VER_LPH8923 3
-#define MIPID_VER_LS041Y3 4
-#define MIPID_VER_L4F00311 8
-#define MIPID_VER_ACX565AKM 9
-
-struct panel_drv_data {
- struct omap_dss_device dssdev;
-
- struct gpio_desc *reset_gpio;
-
- struct videomode vm;
-
- char *name;
- int enabled;
- int model;
- int revision;
- u8 display_id[3];
- unsigned has_bc:1;
- unsigned has_cabc:1;
- unsigned cabc_mode;
- unsigned long hw_guard_end; /* next value of jiffies
- when we can issue the
- next sleep in/out command */
- unsigned long hw_guard_wait; /* max guard time in jiffies */
-
- struct spi_device *spi;
- struct mutex mutex;
-
- struct backlight_device *bl_dev;
-};
-
-static const struct videomode acx565akm_panel_vm = {
- .hactive = 800,
- .vactive = 480,
- .pixelclock = 24000000,
- .hfront_porch = 28,
- .hsync_len = 4,
- .hback_porch = 24,
- .vfront_porch = 3,
- .vsync_len = 3,
- .vback_porch = 4,
-
- .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static void acx565akm_transfer(struct panel_drv_data *ddata, int cmd,
- const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
-{
- struct spi_message m;
- struct spi_transfer *x, xfer[5];
- int r;
-
- BUG_ON(ddata->spi == NULL);
-
- spi_message_init(&m);
-
- memset(xfer, 0, sizeof(xfer));
- x = &xfer[0];
-
- cmd &= 0xff;
- x->tx_buf = &cmd;
- x->bits_per_word = 9;
- x->len = 2;
-
- if (rlen > 1 && wlen == 0) {
- /*
- * Between the command and the response data there is a
- * dummy clock cycle. Add an extra bit after the command
- * word to account for this.
- */
- x->bits_per_word = 10;
- cmd <<= 1;
- }
- spi_message_add_tail(x, &m);
-
- if (wlen) {
- x++;
- x->tx_buf = wbuf;
- x->len = wlen;
- x->bits_per_word = 9;
- spi_message_add_tail(x, &m);
- }
-
- if (rlen) {
- x++;
- x->rx_buf = rbuf;
- x->len = rlen;
- spi_message_add_tail(x, &m);
- }
-
- r = spi_sync(ddata->spi, &m);
- if (r < 0)
- dev_dbg(&ddata->spi->dev, "spi_sync %d\n", r);
-}
-
-static inline void acx565akm_cmd(struct panel_drv_data *ddata, int cmd)
-{
- acx565akm_transfer(ddata, cmd, NULL, 0, NULL, 0);
-}
-
-static inline void acx565akm_write(struct panel_drv_data *ddata,
- int reg, const u8 *buf, int len)
-{
- acx565akm_transfer(ddata, reg, buf, len, NULL, 0);
-}
-
-static inline void acx565akm_read(struct panel_drv_data *ddata,
- int reg, u8 *buf, int len)
-{
- acx565akm_transfer(ddata, reg, NULL, 0, buf, len);
-}
-
-static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
-{
- ddata->hw_guard_wait = msecs_to_jiffies(guard_msec);
- ddata->hw_guard_end = jiffies + ddata->hw_guard_wait;
-}
-
-static void hw_guard_wait(struct panel_drv_data *ddata)
-{
- unsigned long wait = ddata->hw_guard_end - jiffies;
-
- if ((long)wait > 0 && wait <= ddata->hw_guard_wait) {
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(wait);
- }
-}
-
-static void set_sleep_mode(struct panel_drv_data *ddata, int on)
-{
- int cmd;
-
- if (on)
- cmd = MIPID_CMD_SLEEP_IN;
- else
- cmd = MIPID_CMD_SLEEP_OUT;
- /*
- * We have to keep 120msec between sleep in/out commands.
- * (8.2.15, 8.2.16).
- */
- hw_guard_wait(ddata);
- acx565akm_cmd(ddata, cmd);
- hw_guard_start(ddata, 120);
-}
-
-static void set_display_state(struct panel_drv_data *ddata, int enabled)
-{
- int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
-
- acx565akm_cmd(ddata, cmd);
-}
-
-static int panel_enabled(struct panel_drv_data *ddata)
-{
- __be32 v;
- u32 disp_status;
- int enabled;
-
- acx565akm_read(ddata, MIPID_CMD_READ_DISP_STATUS, (u8 *)&v, 4);
- disp_status = __be32_to_cpu(v);
- enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
- dev_dbg(&ddata->spi->dev,
- "LCD panel %senabled by bootloader (status 0x%04x)\n",
- enabled ? "" : "not ", disp_status);
- return enabled;
-}
-
-static int panel_detect(struct panel_drv_data *ddata)
-{
- acx565akm_read(ddata, MIPID_CMD_READ_DISP_ID, ddata->display_id, 3);
- dev_dbg(&ddata->spi->dev, "MIPI display ID: %02x%02x%02x\n",
- ddata->display_id[0],
- ddata->display_id[1],
- ddata->display_id[2]);
-
- switch (ddata->display_id[0]) {
- case 0x10:
- ddata->model = MIPID_VER_ACX565AKM;
- ddata->name = "acx565akm";
- ddata->has_bc = 1;
- ddata->has_cabc = 1;
- break;
- case 0x29:
- ddata->model = MIPID_VER_L4F00311;
- ddata->name = "l4f00311";
- break;
- case 0x45:
- ddata->model = MIPID_VER_LPH8923;
- ddata->name = "lph8923";
- break;
- case 0x83:
- ddata->model = MIPID_VER_LS041Y3;
- ddata->name = "ls041y3";
- break;
- default:
- ddata->name = "unknown";
- dev_err(&ddata->spi->dev, "invalid display ID\n");
- return -ENODEV;
- }
-
- ddata->revision = ddata->display_id[1];
-
- dev_info(&ddata->spi->dev, "omapfb: %s rev %02x LCD detected\n",
- ddata->name, ddata->revision);
-
- return 0;
-}
-
-/*----------------------Backlight Control-------------------------*/
-
-static void enable_backlight_ctrl(struct panel_drv_data *ddata, int enable)
-{
- u16 ctrl;
-
- acx565akm_read(ddata, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1);
- if (enable) {
- ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
- CTRL_DISP_BACKLIGHT_ON;
- } else {
- ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
- CTRL_DISP_BACKLIGHT_ON);
- }
-
- ctrl |= 1 << 8;
- acx565akm_write(ddata, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2);
-}
-
-static void set_cabc_mode(struct panel_drv_data *ddata, unsigned int mode)
-{
- u16 cabc_ctrl;
-
- ddata->cabc_mode = mode;
- if (!ddata->enabled)
- return;
- cabc_ctrl = 0;
- acx565akm_read(ddata, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
- cabc_ctrl &= ~3;
- cabc_ctrl |= (1 << 8) | (mode & 3);
- acx565akm_write(ddata, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
-}
-
-static unsigned int get_cabc_mode(struct panel_drv_data *ddata)
-{
- return ddata->cabc_mode;
-}
-
-static unsigned int get_hw_cabc_mode(struct panel_drv_data *ddata)
-{
- u8 cabc_ctrl;
-
- acx565akm_read(ddata, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
- return cabc_ctrl & 3;
-}
-
-static void acx565akm_set_brightness(struct panel_drv_data *ddata, int level)
-{
- int bv;
-
- bv = level | (1 << 8);
- acx565akm_write(ddata, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2);
-
- if (level)
- enable_backlight_ctrl(ddata, 1);
- else
- enable_backlight_ctrl(ddata, 0);
-}
-
-static int acx565akm_get_actual_brightness(struct panel_drv_data *ddata)
-{
- u8 bv;
-
- acx565akm_read(ddata, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1);
-
- return bv;
-}
-
-
-static int acx565akm_bl_update_status(struct backlight_device *dev)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
- int level;
-
- dev_dbg(&ddata->spi->dev, "%s\n", __func__);
-
- if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
- dev->props.power == FB_BLANK_UNBLANK)
- level = dev->props.brightness;
- else
- level = 0;
-
- if (ddata->has_bc)
- acx565akm_set_brightness(ddata, level);
- else
- return -ENODEV;
-
- return 0;
-}
-
-static int acx565akm_bl_get_intensity(struct backlight_device *dev)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
-
- dev_dbg(&dev->dev, "%s\n", __func__);
-
- if (!ddata->has_bc)
- return -ENODEV;
-
- if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
- dev->props.power == FB_BLANK_UNBLANK) {
- if (ddata->has_bc)
- return acx565akm_get_actual_brightness(ddata);
- else
- return dev->props.brightness;
- }
-
- return 0;
-}
-
-static int acx565akm_bl_update_status_locked(struct backlight_device *dev)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
- int r;
-
- mutex_lock(&ddata->mutex);
- r = acx565akm_bl_update_status(dev);
- mutex_unlock(&ddata->mutex);
-
- return r;
-}
-
-static int acx565akm_bl_get_intensity_locked(struct backlight_device *dev)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
- int r;
-
- mutex_lock(&ddata->mutex);
- r = acx565akm_bl_get_intensity(dev);
- mutex_unlock(&ddata->mutex);
-
- return r;
-}
-
-static const struct backlight_ops acx565akm_bl_ops = {
- .get_brightness = acx565akm_bl_get_intensity_locked,
- .update_status = acx565akm_bl_update_status_locked,
-};
-
-/*--------------------Auto Brightness control via Sysfs---------------------*/
-
-static const char * const cabc_modes[] = {
- "off", /* always used when CABC is not supported */
- "ui",
- "still-image",
- "moving-image",
-};
-
-static ssize_t show_cabc_mode(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(dev);
- const char *mode_str;
- int mode;
- int len;
-
- if (!ddata->has_cabc)
- mode = 0;
- else
- mode = get_cabc_mode(ddata);
- mode_str = "unknown";
- if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
- mode_str = cabc_modes[mode];
- len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
-
- return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
-}
-
-static ssize_t store_cabc_mode(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(dev);
- int i;
-
- for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
- const char *mode_str = cabc_modes[i];
- int cmp_len = strlen(mode_str);
-
- if (count > 0 && buf[count - 1] == '\n')
- count--;
- if (count != cmp_len)
- continue;
-
- if (strncmp(buf, mode_str, cmp_len) == 0)
- break;
- }
-
- if (i == ARRAY_SIZE(cabc_modes))
- return -EINVAL;
-
- if (!ddata->has_cabc && i != 0)
- return -EINVAL;
-
- mutex_lock(&ddata->mutex);
- set_cabc_mode(ddata, i);
- mutex_unlock(&ddata->mutex);
-
- return count;
-}
-
-static ssize_t show_cabc_available_modes(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(dev);
- int len;
- int i;
-
- if (!ddata->has_cabc)
- return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
-
- for (i = 0, len = 0;
- len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
- len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
- i ? " " : "", cabc_modes[i],
- i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
-
- return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
-}
-
-static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
- show_cabc_mode, store_cabc_mode);
-static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
- show_cabc_available_modes, NULL);
-
-static struct attribute *bldev_attrs[] = {
- &dev_attr_cabc_mode.attr,
- &dev_attr_cabc_available_modes.attr,
- NULL,
-};
-
-static const struct attribute_group bldev_attr_group = {
- .attrs = bldev_attrs,
-};
-
-static int acx565akm_connect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
- return 0;
-}
-
-static void acx565akm_disconnect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
-}
-
-static int acx565akm_panel_power_on(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- dev_dbg(&ddata->spi->dev, "%s\n", __func__);
-
- /*FIXME tweak me */
- msleep(50);
-
- if (ddata->reset_gpio)
- gpiod_set_value(ddata->reset_gpio, 1);
-
- if (ddata->enabled) {
- dev_dbg(&ddata->spi->dev, "panel already enabled\n");
- return 0;
- }
-
- /*
- * We have to meet all the following delay requirements:
- * 1. tRW: reset pulse width 10usec (7.12.1)
- * 2. tRT: reset cancel time 5msec (7.12.1)
- * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
- * case (7.6.2)
- * 4. 120msec before the sleep out command (7.12.1)
- */
- msleep(120);
-
- set_sleep_mode(ddata, 0);
- ddata->enabled = 1;
-
- /* 5msec between sleep out and the next command. (8.2.16) */
- usleep_range(5000, 10000);
- set_display_state(ddata, 1);
- set_cabc_mode(ddata, ddata->cabc_mode);
-
- return acx565akm_bl_update_status(ddata->bl_dev);
-}
-
-static void acx565akm_panel_power_off(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- dev_dbg(dssdev->dev, "%s\n", __func__);
-
- if (!ddata->enabled)
- return;
-
- set_display_state(ddata, 0);
- set_sleep_mode(ddata, 1);
- ddata->enabled = 0;
- /*
- * We have to provide PCLK,HS,VS signals for 2 frames (worst case
- * ~50msec) after sending the sleep in command and asserting the
- * reset signal. We probably could assert the reset w/o the delay
- * but we still delay to avoid possible artifacts. (7.6.1)
- */
- msleep(50);
-
- if (ddata->reset_gpio)
- gpiod_set_value(ddata->reset_gpio, 0);
-
- /* FIXME need to tweak this delay */
- msleep(100);
-}
-
-static void acx565akm_enable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- mutex_lock(&ddata->mutex);
- acx565akm_panel_power_on(dssdev);
- mutex_unlock(&ddata->mutex);
-}
-
-static void acx565akm_disable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- mutex_lock(&ddata->mutex);
- acx565akm_panel_power_off(dssdev);
- mutex_unlock(&ddata->mutex);
-}
-
-static int acx565akm_get_modes(struct omap_dss_device *dssdev,
- struct drm_connector *connector)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- return omapdss_display_get_modes(connector, &ddata->vm);
-}
-
-static const struct omap_dss_device_ops acx565akm_ops = {
- .connect = acx565akm_connect,
- .disconnect = acx565akm_disconnect,
-
- .enable = acx565akm_enable,
- .disable = acx565akm_disable,
-
- .get_modes = acx565akm_get_modes,
-};
-
-static int acx565akm_probe(struct spi_device *spi)
-{
- struct panel_drv_data *ddata;
- struct omap_dss_device *dssdev;
- struct backlight_device *bldev;
- int max_brightness, brightness;
- struct backlight_properties props;
- struct gpio_desc *gpio;
- int r;
-
- dev_dbg(&spi->dev, "%s\n", __func__);
-
- spi->mode = SPI_MODE_3;
-
- ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
- if (ddata == NULL)
- return -ENOMEM;
-
- dev_set_drvdata(&spi->dev, ddata);
-
- ddata->spi = spi;
-
- mutex_init(&ddata->mutex);
-
- gpio = devm_gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(gpio)) {
- dev_err(&spi->dev, "failed to parse reset gpio\n");
- return PTR_ERR(gpio);
- }
-
- ddata->reset_gpio = gpio;
-
- if (ddata->reset_gpio)
- gpiod_set_value(ddata->reset_gpio, 1);
-
- /*
- * After reset we have to wait 5 msec before the first
- * command can be sent.
- */
- usleep_range(5000, 10000);
-
- ddata->enabled = panel_enabled(ddata);
-
- r = panel_detect(ddata);
-
- if (!ddata->enabled && ddata->reset_gpio)
- gpiod_set_value(ddata->reset_gpio, 0);
-
- if (r) {
- dev_err(&spi->dev, "%s panel detect error\n", __func__);
- return r;
- }
-
- memset(&props, 0, sizeof(props));
- props.fb_blank = FB_BLANK_UNBLANK;
- props.power = FB_BLANK_UNBLANK;
- props.type = BACKLIGHT_RAW;
-
- bldev = backlight_device_register("acx565akm", &ddata->spi->dev,
- ddata, &acx565akm_bl_ops, &props);
- if (IS_ERR(bldev))
- return PTR_ERR(bldev);
- ddata->bl_dev = bldev;
- if (ddata->has_cabc) {
- r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group);
- if (r) {
- dev_err(&bldev->dev,
- "%s failed to create sysfs files\n", __func__);
- goto err_backlight_unregister;
- }
- ddata->cabc_mode = get_hw_cabc_mode(ddata);
- }
-
- max_brightness = 255;
-
- if (ddata->has_bc)
- brightness = acx565akm_get_actual_brightness(ddata);
- else
- brightness = 0;
-
- bldev->props.max_brightness = max_brightness;
- bldev->props.brightness = brightness;
-
- acx565akm_bl_update_status(bldev);
-
-
- ddata->vm = acx565akm_panel_vm;
-
- dssdev = &ddata->dssdev;
- dssdev->dev = &spi->dev;
- dssdev->ops = &acx565akm_ops;
- dssdev->type = OMAP_DISPLAY_TYPE_SDI;
- dssdev->display = true;
- dssdev->owner = THIS_MODULE;
- dssdev->of_port = 0;
- dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
- | DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE
- | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
-
- omapdss_display_init(dssdev);
- omapdss_device_register(dssdev);
-
- return 0;
-
-err_backlight_unregister:
- backlight_device_unregister(bldev);
- return r;
-}
-
-static int acx565akm_remove(struct spi_device *spi)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
- struct omap_dss_device *dssdev = &ddata->dssdev;
-
- dev_dbg(&ddata->spi->dev, "%s\n", __func__);
-
- sysfs_remove_group(&ddata->bl_dev->dev.kobj, &bldev_attr_group);
- backlight_device_unregister(ddata->bl_dev);
-
- omapdss_device_unregister(dssdev);
-
- if (omapdss_device_is_enabled(dssdev))
- acx565akm_disable(dssdev);
-
- return 0;
-}
-
-static const struct of_device_id acx565akm_of_match[] = {
- { .compatible = "omapdss,sony,acx565akm", },
- {},
-};
-MODULE_DEVICE_TABLE(of, acx565akm_of_match);
-
-static struct spi_driver acx565akm_driver = {
- .driver = {
- .name = "acx565akm",
- .of_match_table = acx565akm_of_match,
- .suppress_bind_attrs = true,
- },
- .probe = acx565akm_probe,
- .remove = acx565akm_remove,
-};
-
-module_spi_driver(acx565akm_driver);
-
-MODULE_ALIAS("spi:sony,acx565akm");
-MODULE_AUTHOR("Nokia Corporation");
-MODULE_DESCRIPTION("acx565akm LCD Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
deleted file mode 100644
index 8993daa73e78..000000000000
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
+++ /dev/null
@@ -1,401 +0,0 @@
-/*
- * Toppoly TD028TTEC1 panel support
- *
- * Copyright (C) 2008 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
- *
- * Neo 1973 code (jbt6k74.c):
- * Copyright (C) 2006-2007 by OpenMoko, Inc.
- * Author: Harald Welte <laforge@openmoko.org>
- *
- * Ported and adapted from Neo 1973 U-Boot by:
- * H. Nikolaus Schaller <hns@goldelico.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-
-#include "../dss/omapdss.h"
-
-struct panel_drv_data {
- struct omap_dss_device dssdev;
-
- struct videomode vm;
-
- struct backlight_device *backlight;
-
- struct spi_device *spi_dev;
-};
-
-static const struct videomode td028ttec1_panel_vm = {
- .hactive = 480,
- .vactive = 640,
- .pixelclock = 22153000,
- .hfront_porch = 24,
- .hsync_len = 8,
- .hback_porch = 8,
- .vfront_porch = 4,
- .vsync_len = 2,
- .vback_porch = 2,
-
- .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
-};
-
-#define JBT_COMMAND 0x000
-#define JBT_DATA 0x100
-
-static int jbt_ret_write_0(struct panel_drv_data *ddata, u8 reg)
-{
- int rc;
- u16 tx_buf = JBT_COMMAND | reg;
-
- rc = spi_write(ddata->spi_dev, (u8 *)&tx_buf,
- 1*sizeof(u16));
- if (rc != 0)
- dev_err(&ddata->spi_dev->dev,
- "jbt_ret_write_0 spi_write ret %d\n", rc);
-
- return rc;
-}
-
-static int jbt_reg_write_1(struct panel_drv_data *ddata, u8 reg, u8 data)
-{
- int rc;
- u16 tx_buf[2];
-
- tx_buf[0] = JBT_COMMAND | reg;
- tx_buf[1] = JBT_DATA | data;
- rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
- 2*sizeof(u16));
- if (rc != 0)
- dev_err(&ddata->spi_dev->dev,
- "jbt_reg_write_1 spi_write ret %d\n", rc);
-
- return rc;
-}
-
-static int jbt_reg_write_2(struct panel_drv_data *ddata, u8 reg, u16 data)
-{
- int rc;
- u16 tx_buf[3];
-
- tx_buf[0] = JBT_COMMAND | reg;
- tx_buf[1] = JBT_DATA | (data >> 8);
- tx_buf[2] = JBT_DATA | (data & 0xff);
-
- rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
- 3*sizeof(u16));
-
- if (rc != 0)
- dev_err(&ddata->spi_dev->dev,
- "jbt_reg_write_2 spi_write ret %d\n", rc);
-
- return rc;
-}
-
-enum jbt_register {
- JBT_REG_SLEEP_IN = 0x10,
- JBT_REG_SLEEP_OUT = 0x11,
-
- JBT_REG_DISPLAY_OFF = 0x28,
- JBT_REG_DISPLAY_ON = 0x29,
-
- JBT_REG_RGB_FORMAT = 0x3a,
- JBT_REG_QUAD_RATE = 0x3b,
-
- JBT_REG_POWER_ON_OFF = 0xb0,
- JBT_REG_BOOSTER_OP = 0xb1,
- JBT_REG_BOOSTER_MODE = 0xb2,
- JBT_REG_BOOSTER_FREQ = 0xb3,
- JBT_REG_OPAMP_SYSCLK = 0xb4,
- JBT_REG_VSC_VOLTAGE = 0xb5,
- JBT_REG_VCOM_VOLTAGE = 0xb6,
- JBT_REG_EXT_DISPL = 0xb7,
- JBT_REG_OUTPUT_CONTROL = 0xb8,
- JBT_REG_DCCLK_DCEV = 0xb9,
- JBT_REG_DISPLAY_MODE1 = 0xba,
- JBT_REG_DISPLAY_MODE2 = 0xbb,
- JBT_REG_DISPLAY_MODE = 0xbc,
- JBT_REG_ASW_SLEW = 0xbd,
- JBT_REG_DUMMY_DISPLAY = 0xbe,
- JBT_REG_DRIVE_SYSTEM = 0xbf,
-
- JBT_REG_SLEEP_OUT_FR_A = 0xc0,
- JBT_REG_SLEEP_OUT_FR_B = 0xc1,
- JBT_REG_SLEEP_OUT_FR_C = 0xc2,
- JBT_REG_SLEEP_IN_LCCNT_D = 0xc3,
- JBT_REG_SLEEP_IN_LCCNT_E = 0xc4,
- JBT_REG_SLEEP_IN_LCCNT_F = 0xc5,
- JBT_REG_SLEEP_IN_LCCNT_G = 0xc6,
-
- JBT_REG_GAMMA1_FINE_1 = 0xc7,
- JBT_REG_GAMMA1_FINE_2 = 0xc8,
- JBT_REG_GAMMA1_INCLINATION = 0xc9,
- JBT_REG_GAMMA1_BLUE_OFFSET = 0xca,
-
- JBT_REG_BLANK_CONTROL = 0xcf,
- JBT_REG_BLANK_TH_TV = 0xd0,
- JBT_REG_CKV_ON_OFF = 0xd1,
- JBT_REG_CKV_1_2 = 0xd2,
- JBT_REG_OEV_TIMING = 0xd3,
- JBT_REG_ASW_TIMING_1 = 0xd4,
- JBT_REG_ASW_TIMING_2 = 0xd5,
-
- JBT_REG_HCLOCK_VGA = 0xec,
- JBT_REG_HCLOCK_QVGA = 0xed,
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int td028ttec1_panel_connect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
- return 0;
-}
-
-static void td028ttec1_panel_disconnect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
-}
-
-static void td028ttec1_panel_enable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
- int r = 0;
-
- dev_dbg(dssdev->dev, "%s: state %d\n", __func__, dssdev->state);
-
- /* three times command zero */
- r |= jbt_ret_write_0(ddata, 0x00);
- usleep_range(1000, 2000);
- r |= jbt_ret_write_0(ddata, 0x00);
- usleep_range(1000, 2000);
- r |= jbt_ret_write_0(ddata, 0x00);
- usleep_range(1000, 2000);
-
- if (r) {
- dev_warn(dssdev->dev, "%s: transfer error\n", __func__);
- return;
- }
-
- /* deep standby out */
- r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x17);
-
- /* RGB I/F on, RAM write off, QVGA through, SIGCON enable */
- r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE, 0x80);
-
- /* Quad mode off */
- r |= jbt_reg_write_1(ddata, JBT_REG_QUAD_RATE, 0x00);
-
- /* AVDD on, XVDD on */
- r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x16);
-
- /* Output control */
- r |= jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0xfff9);
-
- /* Sleep mode off */
- r |= jbt_ret_write_0(ddata, JBT_REG_SLEEP_OUT);
-
- /* at this point we have like 50% grey */
-
- /* initialize register set */
- r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE1, 0x01);
- r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE2, 0x00);
- r |= jbt_reg_write_1(ddata, JBT_REG_RGB_FORMAT, 0x60);
- r |= jbt_reg_write_1(ddata, JBT_REG_DRIVE_SYSTEM, 0x10);
- r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_OP, 0x56);
- r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_MODE, 0x33);
- r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
- r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
- r |= jbt_reg_write_1(ddata, JBT_REG_OPAMP_SYSCLK, 0x02);
- r |= jbt_reg_write_1(ddata, JBT_REG_VSC_VOLTAGE, 0x2b);
- r |= jbt_reg_write_1(ddata, JBT_REG_VCOM_VOLTAGE, 0x40);
- r |= jbt_reg_write_1(ddata, JBT_REG_EXT_DISPL, 0x03);
- r |= jbt_reg_write_1(ddata, JBT_REG_DCCLK_DCEV, 0x04);
- /*
- * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
- * to avoid red / blue flicker
- */
- r |= jbt_reg_write_1(ddata, JBT_REG_ASW_SLEW, 0x04);
- r |= jbt_reg_write_1(ddata, JBT_REG_DUMMY_DISPLAY, 0x00);
-
- r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_A, 0x11);
- r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_B, 0x11);
- r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_C, 0x11);
- r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
- r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
- r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
- r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
-
- r |= jbt_reg_write_2(ddata, JBT_REG_GAMMA1_FINE_1, 0x5533);
- r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_FINE_2, 0x00);
- r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_INCLINATION, 0x00);
- r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
-
- r |= jbt_reg_write_2(ddata, JBT_REG_HCLOCK_VGA, 0x1f0);
- r |= jbt_reg_write_1(ddata, JBT_REG_BLANK_CONTROL, 0x02);
- r |= jbt_reg_write_2(ddata, JBT_REG_BLANK_TH_TV, 0x0804);
-
- r |= jbt_reg_write_1(ddata, JBT_REG_CKV_ON_OFF, 0x01);
- r |= jbt_reg_write_2(ddata, JBT_REG_CKV_1_2, 0x0000);
-
- r |= jbt_reg_write_2(ddata, JBT_REG_OEV_TIMING, 0x0d0e);
- r |= jbt_reg_write_2(ddata, JBT_REG_ASW_TIMING_1, 0x11a4);
- r |= jbt_reg_write_1(ddata, JBT_REG_ASW_TIMING_2, 0x0e);
-
- r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
-
- if (r)
- dev_err(dssdev->dev, "%s: write error\n", __func__);
-
- backlight_enable(ddata->backlight);
-}
-
-static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- backlight_disable(ddata->backlight);
-
- dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
-
- jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF);
- jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002);
- jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN);
- jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00);
-}
-
-static int td028ttec1_panel_get_modes(struct omap_dss_device *dssdev,
- struct drm_connector *connector)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- return omapdss_display_get_modes(connector, &ddata->vm);
-}
-
-static const struct omap_dss_device_ops td028ttec1_ops = {
- .connect = td028ttec1_panel_connect,
- .disconnect = td028ttec1_panel_disconnect,
-
- .enable = td028ttec1_panel_enable,
- .disable = td028ttec1_panel_disable,
-
- .get_modes = td028ttec1_panel_get_modes,
-};
-
-static int td028ttec1_panel_probe(struct spi_device *spi)
-{
- struct panel_drv_data *ddata;
- struct omap_dss_device *dssdev;
- int r;
-
- dev_dbg(&spi->dev, "%s\n", __func__);
-
- spi->bits_per_word = 9;
- spi->mode = SPI_MODE_3;
-
- r = spi_setup(spi);
- if (r < 0) {
- dev_err(&spi->dev, "spi_setup failed: %d\n", r);
- return r;
- }
-
- ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
- if (ddata == NULL)
- return -ENOMEM;
-
- ddata->backlight = devm_of_find_backlight(&spi->dev);
- if (IS_ERR(ddata->backlight))
- return PTR_ERR(ddata->backlight);
-
- dev_set_drvdata(&spi->dev, ddata);
-
- ddata->spi_dev = spi;
-
- ddata->vm = td028ttec1_panel_vm;
-
- dssdev = &ddata->dssdev;
- dssdev->dev = &spi->dev;
- dssdev->ops = &td028ttec1_ops;
- dssdev->type = OMAP_DISPLAY_TYPE_DPI;
- dssdev->display = true;
- dssdev->owner = THIS_MODULE;
- dssdev->of_port = 0;
- dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
-
- /*
- * Note: According to the panel documentation:
- * SYNC needs to be driven on the FALLING edge
- */
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
- | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
- | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
-
- omapdss_display_init(dssdev);
- omapdss_device_register(dssdev);
-
- return 0;
-}
-
-static int td028ttec1_panel_remove(struct spi_device *spi)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
- struct omap_dss_device *dssdev = &ddata->dssdev;
-
- dev_dbg(&ddata->spi_dev->dev, "%s\n", __func__);
-
- omapdss_device_unregister(dssdev);
-
- td028ttec1_panel_disable(dssdev);
-
- return 0;
-}
-
-static const struct of_device_id td028ttec1_of_match[] = {
- { .compatible = "omapdss,tpo,td028ttec1", },
- /* keep to not break older DTB */
- { .compatible = "omapdss,toppoly,td028ttec1", },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
-
-static const struct spi_device_id td028ttec1_ids[] = {
- { "toppoly,td028ttec1", 0 },
- { "tpo,td028ttec1", 0},
- { /* sentinel */ }
-};
-
-MODULE_DEVICE_TABLE(spi, td028ttec1_ids);
-
-
-static struct spi_driver td028ttec1_spi_driver = {
- .probe = td028ttec1_panel_probe,
- .remove = td028ttec1_panel_remove,
- .id_table = td028ttec1_ids,
-
- .driver = {
- .name = "panel-tpo-td028ttec1",
- .of_match_table = td028ttec1_of_match,
- .suppress_bind_attrs = true,
- },
-};
-
-module_spi_driver(td028ttec1_spi_driver);
-
-MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
-MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
deleted file mode 100644
index c667f4287893..000000000000
--- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td043mtea1.c
+++ /dev/null
@@ -1,513 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * TPO TD043MTEA1 Panel driver
- *
- * Author: Gražvydas Ignotas <notasas@gmail.com>
- * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/gpio/consumer.h>
-#include <linux/module.h>
-#include <linux/regulator/consumer.h>
-#include <linux/slab.h>
-#include <linux/spi/spi.h>
-
-#include "../dss/omapdss.h"
-
-#define TPO_R02_MODE(x) ((x) & 7)
-#define TPO_R02_MODE_800x480 7
-#define TPO_R02_NCLK_RISING BIT(3)
-#define TPO_R02_HSYNC_HIGH BIT(4)
-#define TPO_R02_VSYNC_HIGH BIT(5)
-
-#define TPO_R03_NSTANDBY BIT(0)
-#define TPO_R03_EN_CP_CLK BIT(1)
-#define TPO_R03_EN_VGL_PUMP BIT(2)
-#define TPO_R03_EN_PWM BIT(3)
-#define TPO_R03_DRIVING_CAP_100 BIT(4)
-#define TPO_R03_EN_PRE_CHARGE BIT(6)
-#define TPO_R03_SOFTWARE_CTL BIT(7)
-
-#define TPO_R04_NFLIP_H BIT(0)
-#define TPO_R04_NFLIP_V BIT(1)
-#define TPO_R04_CP_CLK_FREQ_1H BIT(2)
-#define TPO_R04_VGL_FREQ_1H BIT(4)
-
-#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
- TPO_R03_EN_VGL_PUMP | TPO_R03_EN_PWM | \
- TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
- TPO_R03_SOFTWARE_CTL)
-
-#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
- TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
-
-static const u16 tpo_td043_def_gamma[12] = {
- 105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
-};
-
-struct panel_drv_data {
- struct omap_dss_device dssdev;
-
- struct videomode vm;
-
- struct spi_device *spi;
- struct regulator *vcc_reg;
- struct gpio_desc *reset_gpio;
- u16 gamma[12];
- u32 mode;
- u32 vmirror:1;
- u32 powered_on:1;
- u32 spi_suspended:1;
- u32 power_on_resume:1;
-};
-
-static const struct videomode tpo_td043_vm = {
- .hactive = 800,
- .vactive = 480,
-
- .pixelclock = 36000000,
-
- .hsync_len = 1,
- .hfront_porch = 68,
- .hback_porch = 214,
-
- .vsync_len = 1,
- .vfront_porch = 39,
- .vback_porch = 34,
-
- .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
-{
- struct spi_message m;
- struct spi_transfer xfer;
- u16 w;
- int r;
-
- spi_message_init(&m);
-
- memset(&xfer, 0, sizeof(xfer));
-
- w = ((u16)addr << 10) | (1 << 8) | data;
- xfer.tx_buf = &w;
- xfer.bits_per_word = 16;
- xfer.len = 2;
- spi_message_add_tail(&xfer, &m);
-
- r = spi_sync(spi, &m);
- if (r < 0)
- dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
- return r;
-}
-
-static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
-{
- u8 i, val;
-
- /* gamma bits [9:8] */
- for (val = i = 0; i < 4; i++)
- val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
- tpo_td043_write(spi, 0x11, val);
-
- for (val = i = 0; i < 4; i++)
- val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
- tpo_td043_write(spi, 0x12, val);
-
- for (val = i = 0; i < 4; i++)
- val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
- tpo_td043_write(spi, 0x13, val);
-
- /* gamma bits [7:0] */
- for (val = i = 0; i < 12; i++)
- tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
-}
-
-static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
-{
- u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
- TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
- if (h)
- reg4 &= ~TPO_R04_NFLIP_H;
- if (v)
- reg4 &= ~TPO_R04_NFLIP_V;
-
- return tpo_td043_write(spi, 4, reg4);
-}
-
-static ssize_t tpo_td043_vmirror_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(dev);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror);
-}
-
-static ssize_t tpo_td043_vmirror_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(dev);
- int val;
- int ret;
-
- ret = kstrtoint(buf, 0, &val);
- if (ret < 0)
- return ret;
-
- val = !!val;
-
- ret = tpo_td043_write_mirror(ddata->spi, false, val);
- if (ret < 0)
- return ret;
-
- ddata->vmirror = val;
-
- return count;
-}
-
-static ssize_t tpo_td043_mode_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(dev);
-
- return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode);
-}
-
-static ssize_t tpo_td043_mode_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(dev);
- long val;
- int ret;
-
- ret = kstrtol(buf, 0, &val);
- if (ret != 0 || val & ~7)
- return -EINVAL;
-
- ddata->mode = val;
-
- val |= TPO_R02_NCLK_RISING;
- tpo_td043_write(ddata->spi, 2, val);
-
- return count;
-}
-
-static ssize_t tpo_td043_gamma_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(dev);
- ssize_t len = 0;
- int ret;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(ddata->gamma); i++) {
- ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
- ddata->gamma[i]);
- if (ret < 0)
- return ret;
- len += ret;
- }
- buf[len - 1] = '\n';
-
- return len;
-}
-
-static ssize_t tpo_td043_gamma_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(dev);
- unsigned int g[12];
- int ret;
- int i;
-
- ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
- &g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
- &g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
-
- if (ret != 12)
- return -EINVAL;
-
- for (i = 0; i < 12; i++)
- ddata->gamma[i] = g[i];
-
- tpo_td043_write_gamma(ddata->spi, ddata->gamma);
-
- return count;
-}
-
-static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
- tpo_td043_vmirror_show, tpo_td043_vmirror_store);
-static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
- tpo_td043_mode_show, tpo_td043_mode_store);
-static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
- tpo_td043_gamma_show, tpo_td043_gamma_store);
-
-static struct attribute *tpo_td043_attrs[] = {
- &dev_attr_vmirror.attr,
- &dev_attr_mode.attr,
- &dev_attr_gamma.attr,
- NULL,
-};
-
-static const struct attribute_group tpo_td043_attr_group = {
- .attrs = tpo_td043_attrs,
-};
-
-static int tpo_td043_power_on(struct panel_drv_data *ddata)
-{
- int r;
-
- if (ddata->powered_on)
- return 0;
-
- r = regulator_enable(ddata->vcc_reg);
- if (r != 0)
- return r;
-
- /* wait for panel to stabilize */
- msleep(160);
-
- gpiod_set_value(ddata->reset_gpio, 0);
-
- tpo_td043_write(ddata->spi, 2,
- TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
- tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_NORMAL);
- tpo_td043_write(ddata->spi, 0x20, 0xf0);
- tpo_td043_write(ddata->spi, 0x21, 0xf0);
- tpo_td043_write_mirror(ddata->spi, false, ddata->vmirror);
- tpo_td043_write_gamma(ddata->spi, ddata->gamma);
-
- ddata->powered_on = 1;
- return 0;
-}
-
-static void tpo_td043_power_off(struct panel_drv_data *ddata)
-{
- if (!ddata->powered_on)
- return;
-
- tpo_td043_write(ddata->spi, 3,
- TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
-
- gpiod_set_value(ddata->reset_gpio, 1);
-
- /* wait for at least 2 vsyncs before cutting off power */
- msleep(50);
-
- tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_STANDBY);
-
- regulator_disable(ddata->vcc_reg);
-
- ddata->powered_on = 0;
-}
-
-static int tpo_td043_connect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
- return 0;
-}
-
-static void tpo_td043_disconnect(struct omap_dss_device *src,
- struct omap_dss_device *dst)
-{
-}
-
-static void tpo_td043_enable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
- int r;
-
- /*
- * If we are resuming from system suspend, SPI clocks might not be
- * enabled yet, so we'll program the LCD from SPI PM resume callback.
- */
- if (!ddata->spi_suspended) {
- r = tpo_td043_power_on(ddata);
- if (r) {
- dev_err(&ddata->spi->dev, "%s: power on failed (%d)\n",
- __func__, r);
- return;
- }
- }
-}
-
-static void tpo_td043_disable(struct omap_dss_device *dssdev)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- if (!ddata->spi_suspended)
- tpo_td043_power_off(ddata);
-}
-
-static int tpo_td043_get_modes(struct omap_dss_device *dssdev,
- struct drm_connector *connector)
-{
- struct panel_drv_data *ddata = to_panel_data(dssdev);
-
- return omapdss_display_get_modes(connector, &ddata->vm);
-}
-
-static const struct omap_dss_device_ops tpo_td043_ops = {
- .connect = tpo_td043_connect,
- .disconnect = tpo_td043_disconnect,
-
- .enable = tpo_td043_enable,
- .disable = tpo_td043_disable,
-
- .get_modes = tpo_td043_get_modes,
-};
-
-static int tpo_td043_probe(struct spi_device *spi)
-{
- struct panel_drv_data *ddata;
- struct omap_dss_device *dssdev;
- struct gpio_desc *gpio;
- int r;
-
- dev_dbg(&spi->dev, "%s\n", __func__);
-
- spi->bits_per_word = 16;
- spi->mode = SPI_MODE_0;
-
- r = spi_setup(spi);
- if (r < 0) {
- dev_err(&spi->dev, "spi_setup failed: %d\n", r);
- return r;
- }
-
- ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
- if (ddata == NULL)
- return -ENOMEM;
-
- dev_set_drvdata(&spi->dev, ddata);
-
- ddata->spi = spi;
-
- ddata->mode = TPO_R02_MODE_800x480;
- memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
-
- ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
- if (IS_ERR(ddata->vcc_reg)) {
- dev_err(&spi->dev, "failed to get LCD VCC regulator\n");
- return PTR_ERR(ddata->vcc_reg);
- }
-
- gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH);
- if (IS_ERR(gpio)) {
- dev_err(&spi->dev, "failed to get reset gpio\n");
- return PTR_ERR(gpio);
- }
-
- ddata->reset_gpio = gpio;
-
- r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
- if (r) {
- dev_err(&spi->dev, "failed to create sysfs files\n");
- return r;
- }
-
- ddata->vm = tpo_td043_vm;
-
- dssdev = &ddata->dssdev;
- dssdev->dev = &spi->dev;
- dssdev->ops = &tpo_td043_ops;
- dssdev->type = OMAP_DISPLAY_TYPE_DPI;
- dssdev->display = true;
- dssdev->owner = THIS_MODULE;
- dssdev->of_port = 0;
- dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
-
- /*
- * Note: According to the panel documentation:
- * SYNC needs to be driven on the FALLING edge
- */
- dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH
- | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE
- | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
-
- omapdss_display_init(dssdev);
- omapdss_device_register(dssdev);
-
- return 0;
-}
-
-static int tpo_td043_remove(struct spi_device *spi)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
- struct omap_dss_device *dssdev = &ddata->dssdev;
-
- dev_dbg(&ddata->spi->dev, "%s\n", __func__);
-
- omapdss_device_unregister(dssdev);
-
- if (omapdss_device_is_enabled(dssdev))
- tpo_td043_disable(dssdev);
-
- sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
-
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int tpo_td043_spi_suspend(struct device *dev)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(dev);
-
- dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", ddata);
-
- ddata->power_on_resume = ddata->powered_on;
- tpo_td043_power_off(ddata);
- ddata->spi_suspended = 1;
-
- return 0;
-}
-
-static int tpo_td043_spi_resume(struct device *dev)
-{
- struct panel_drv_data *ddata = dev_get_drvdata(dev);
- int ret;
-
- dev_dbg(dev, "tpo_td043_spi_resume\n");
-
- if (ddata->power_on_resume) {
- ret = tpo_td043_power_on(ddata);
- if (ret)
- return ret;
- }
- ddata->spi_suspended = 0;
-
- return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
- tpo_td043_spi_suspend, tpo_td043_spi_resume);
-
-static const struct of_device_id tpo_td043_of_match[] = {
- { .compatible = "omapdss,tpo,td043mtea1", },
- {},
-};
-
-MODULE_DEVICE_TABLE(of, tpo_td043_of_match);
-
-static struct spi_driver tpo_td043_spi_driver = {
- .driver = {
- .name = "panel-tpo-td043mtea1",
- .pm = &tpo_td043_spi_pm,
- .of_match_table = tpo_td043_of_match,
- .suppress_bind_attrs = true,
- },
- .probe = tpo_td043_probe,
- .remove = tpo_td043_remove,
-};
-
-module_spi_driver(tpo_td043_spi_driver);
-
-MODULE_ALIAS("spi:tpo,td043mtea1");
-MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
-MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
index 24e36d68f3c4..caa291ea1c5c 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c
@@ -185,14 +185,7 @@ static const struct of_device_id omapdss_of_match[] __initconst = {
};
static const struct of_device_id omapdss_of_fixups_whitelist[] __initconst = {
- { .compatible = "lgphilips,lb035q02" },
- { .compatible = "nec,nl8048hl11" },
{ .compatible = "panel-dsi-cm" },
- { .compatible = "sharp,ls037v7dw01" },
- { .compatible = "sony,acx565akm" },
- { .compatible = "toppoly,td028ttec1" },
- { .compatible = "tpo,td028ttec1" },
- { .compatible = "tpo,td043mtea1" },
{},
};
--
Regards,
Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-07-07 18:38 UTC|newest]
Thread overview: 166+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-07 18:07 [PATCH 00/60] drm/omap: Replace custom display drivers with drm_bridge and drm_panel Laurent Pinchart
2019-07-07 18:07 ` [PATCH 01/60] drm/edid: Add flag to drm_display_info to identify HDMI sinks Laurent Pinchart
2019-07-09 13:20 ` Andrzej Hajda
2019-07-10 15:41 ` Daniel Vetter
2019-07-10 15:59 ` Ville Syrjälä
2019-07-07 18:07 ` [PATCH 02/60] video: hdmi: Change return type of hdmi_avi_infoframe_init() to void Laurent Pinchart
2019-07-07 18:14 ` Laurent Pinchart
2019-07-07 18:21 ` Ilia Mirkin
2019-07-09 13:22 ` Andrzej Hajda
2019-07-07 18:07 ` [PATCH 03/60] drm/bridge: dumb-vga-dac: Rename internal symbols to simple-bridge Laurent Pinchart
2019-07-09 13:34 ` Andrzej Hajda
2019-07-07 18:18 ` [PATCH 04/60] drm/bridge: dumb-vga-dac: Rename driver " Laurent Pinchart
2019-07-07 18:18 ` [PATCH 05/60] drm/bridge: simple-bridge: Add support for non-VGA bridges Laurent Pinchart
2019-07-09 14:08 ` Andrzej Hajda
2019-07-26 13:24 ` Stefan Agner
2019-07-07 18:18 ` [PATCH 06/60] drm/bridge: simple-bridge: Add support for enable GPIO Laurent Pinchart
2019-07-09 14:32 ` Andrzej Hajda
2019-07-26 13:19 ` Stefan Agner
2019-07-07 18:18 ` [PATCH 07/60] drm/bridge: simple-bridge: Add support for the TI OP362 Laurent Pinchart
2019-07-09 14:32 ` Andrzej Hajda
2019-08-27 6:16 ` Tomi Valkeinen
2019-07-07 18:18 ` [PATCH 08/60] drm/bridge: Extend bridge API to disable connector creation Laurent Pinchart
2019-07-17 6:39 ` Andrzej Hajda
2019-08-08 14:25 ` Laurent Pinchart
2019-08-08 17:36 ` Andrzej Hajda
2019-08-08 18:50 ` Laurent Pinchart
2019-08-14 8:18 ` Daniel Vetter
2019-08-14 9:55 ` Laurent Pinchart
2019-08-14 12:24 ` Daniel Vetter
2019-07-07 18:18 ` [PATCH 09/60] drm/bridge: Add connector-related bridge operations and data Laurent Pinchart
2019-07-10 12:12 ` Andrzej Hajda
2019-07-11 7:35 ` Daniel Vetter
2019-07-11 12:41 ` Andrzej Hajda
2019-07-11 13:18 ` Daniel Vetter
2019-07-11 15:12 ` Andrzej Hajda
2019-07-11 15:50 ` Daniel Vetter
2019-07-12 9:01 ` Andrzej Hajda
2019-07-16 9:00 ` Daniel Vetter
2019-07-16 13:57 ` Andrzej Hajda
2019-08-08 19:32 ` Laurent Pinchart
2019-08-09 11:55 ` Andrzej Hajda
2019-08-10 22:43 ` Laurent Pinchart
2019-08-14 6:23 ` Andrzej Hajda
2019-08-14 10:04 ` Laurent Pinchart
2019-08-14 12:40 ` Daniel Vetter
2019-08-19 8:38 ` Andrzej Hajda
2019-08-19 22:45 ` Laurent Pinchart
2019-08-22 12:17 ` Andrzej Hajda
2019-08-26 16:27 ` Laurent Pinchart
2019-08-29 16:48 ` Andrzej Hajda
2019-12-02 15:40 ` Laurent Pinchart
2019-08-14 12:35 ` Daniel Vetter
2019-08-19 22:32 ` Laurent Pinchart
2019-08-20 8:30 ` Daniel Vetter
2019-08-26 15:57 ` Laurent Pinchart
2019-08-08 18:19 ` Laurent Pinchart
2019-08-08 18:36 ` Laurent Pinchart
2019-08-14 13:03 ` Daniel Vetter
2019-08-14 13:30 ` Laurent Pinchart
2019-08-14 17:02 ` Daniel Vetter
2019-08-16 23:30 ` Laurent Pinchart
2019-08-17 0:14 ` Laurent Pinchart
2019-08-19 2:37 ` Laurent Pinchart
2019-08-20 8:41 ` Daniel Vetter
2019-08-14 12:43 ` Daniel Vetter
2019-08-14 12:56 ` Laurent Pinchart
2019-07-07 18:18 ` [PATCH 10/60] drm/bridge: Add bridge driver for display connectors Laurent Pinchart
2019-07-16 9:28 ` Sam Ravnborg
2019-08-08 16:41 ` Laurent Pinchart
2019-09-30 11:15 ` Tomi Valkeinen
2019-10-01 20:08 ` Laurent Pinchart
2019-10-02 12:38 ` Tomi Valkeinen
2019-07-07 18:18 ` [PATCH 11/60] drm/bridge: Add driver for the TI TPD12S015 HDMI level shifter Laurent Pinchart
[not found] ` <3347b6c8-6f2d-17d6-3dc8-e62a3bac634b@ti.com>
2019-08-27 7:30 ` Laurent Pinchart
2019-07-07 18:18 ` [PATCH 12/60] drm/bridge: panel: Implement bridge connector operations Laurent Pinchart
2019-07-16 11:08 ` drm_panel_get_modes() should take the connector as an argument [Was: drm/bridge: panel: Implement bridge ...] Sam Ravnborg
2019-08-08 16:07 ` Laurent Pinchart
2019-08-08 16:52 ` Sam Ravnborg
2019-08-08 18:37 ` Laurent Pinchart
2019-07-07 18:18 ` [PATCH 13/60] drm/bridge: tfp410: Don't include drmP.h Laurent Pinchart
[not found] ` <3bb82dc4-434a-aaac-8ea1-3aff0991e790@ti.com>
2019-08-27 7:47 ` Laurent Pinchart
2019-07-07 18:18 ` [PATCH 14/60] drm/bridge: tfp410: Replace manual connector handling with bridge Laurent Pinchart
2019-07-07 18:18 ` [PATCH 15/60] drm/bridge: tfp410: Allow operation without drm_connector Laurent Pinchart
2019-07-07 18:18 ` [PATCH 16/60] dt-bindings: Add vendor prefix for LG Display Laurent Pinchart
2019-07-24 16:22 ` Rob Herring
2019-07-07 18:18 ` [PATCH 17/60] dt-bindings: Add legacy 'toppoly' vendor prefix Laurent Pinchart
2019-07-08 19:00 ` Rob Herring
2019-07-09 1:00 ` Laurent Pinchart
2019-07-09 1:35 ` Rob Herring
2019-07-07 18:18 ` [PATCH 18/60] dt-bindings: display: panel: Add bindings for NEC NL8048HL11 panel Laurent Pinchart
2019-07-07 18:18 ` [PATCH 19/60] drm/panel: Add driver for the LG Philips LB035Q02 panel Laurent Pinchart
2019-07-08 18:51 ` Sam Ravnborg
2019-07-09 0:56 ` Laurent Pinchart
2019-07-09 5:47 ` Sam Ravnborg
2019-07-07 18:18 ` [PATCH 20/60] drm/panel: Add driver for the NEC NL8048HL11 panel Laurent Pinchart
2019-07-08 19:10 ` Sam Ravnborg
2019-07-08 19:26 ` Sam Ravnborg
2019-08-08 15:17 ` Laurent Pinchart
2019-07-07 18:18 ` [PATCH 21/60] drm/panel: Add driver for the Sharp LS037V7DW01 panel Laurent Pinchart
2019-07-08 19:44 ` Sam Ravnborg
2019-07-08 19:47 ` Sam Ravnborg
2019-08-08 15:31 ` Laurent Pinchart
2019-07-07 18:18 ` [PATCH 22/60] drm/panel: Add driver for the Sony ACX565AKM panel Laurent Pinchart
2019-07-07 18:19 ` [PATCH 23/60] drm/panel: Add driver for the Toppology TD028TTEC1 panel Laurent Pinchart
2019-07-10 7:48 ` Sam Ravnborg
2019-08-08 15:43 ` Laurent Pinchart
2019-07-07 18:19 ` [PATCH 24/60] drm/panel: Add driver for the Toppology TD043MTEA1 panel Laurent Pinchart
2019-07-10 13:09 ` Sam Ravnborg
2019-08-08 15:54 ` Laurent Pinchart
2019-08-09 13:33 ` Sam Ravnborg
2019-08-09 17:51 ` Laurent Pinchart
2019-07-07 18:19 ` [PATCH 25/60] drm: Add helper to create a connector for a chain of bridges Laurent Pinchart
2019-07-18 17:01 ` Daniel Vetter
2019-08-08 19:48 ` Laurent Pinchart
2019-08-14 15:01 ` Daniel Vetter
2019-08-19 22:16 ` Laurent Pinchart
2019-07-07 18:19 ` [PATCH 26/60] drm/omap: Detach from panels at remove time Laurent Pinchart
2019-08-13 7:28 ` Tomi Valkeinen
2019-08-13 13:50 ` Laurent Pinchart
2019-07-07 18:19 ` [PATCH 27/60] drm/omap: Simplify HDMI mode and infoframe configuration Laurent Pinchart
2019-08-13 7:29 ` Tomi Valkeinen
2019-07-07 18:19 ` [PATCH 28/60] drm/omap: Factor out display type to connector type conversion Laurent Pinchart
2019-08-13 7:32 ` Tomi Valkeinen
2019-08-13 15:18 ` Laurent Pinchart
2019-07-07 18:19 ` [PATCH 29/60] drm/omap: Use the drm_panel_bridge API Laurent Pinchart
2019-08-13 7:36 ` Tomi Valkeinen
2019-07-07 18:19 ` [PATCH 30/60] drm/omap: dss: Fix output next device lookup in DT Laurent Pinchart
2019-08-13 7:38 ` Tomi Valkeinen
2019-07-07 18:19 ` [PATCH 31/60] drm/omap: Add infrastructure to support drm_bridge local to DSS outputs Laurent Pinchart
2019-07-07 18:19 ` [PATCH 32/60] drm/omap: dss: Make omap_dss_device_ops optional Laurent Pinchart
2019-08-13 7:48 ` Tomi Valkeinen
2019-08-13 13:55 ` Laurent Pinchart
2019-07-07 18:19 ` [PATCH 33/60] drm/omap: hdmi: Allocate EDID in the .read_edid() operation Laurent Pinchart
2019-08-13 7:52 ` Tomi Valkeinen
2019-07-07 18:19 ` [PATCH 34/60] drm/omap: hdmi4: Rework EDID read to isolate data read Laurent Pinchart
2019-07-07 18:19 ` [PATCH 35/60] drm/omap: hdmi5: " Laurent Pinchart
2019-07-07 18:19 ` [PATCH 36/60] drm/omap: hdmi4: Register a drm_bridge for EDID read Laurent Pinchart
2019-07-07 18:19 ` [PATCH 37/60] drm/omap: hdmi5: " Laurent Pinchart
2019-07-07 18:19 ` [PATCH 38/60] drm/omap: hdmi4: Move mode set, enable and disable operations to bridge Laurent Pinchart
2019-07-07 18:19 ` [PATCH 39/60] drm/omap: hdmi5: " Laurent Pinchart
2019-07-07 18:19 ` [PATCH 40/60] drm/omap: hdmi4: Implement drm_bridge .lost_hotplug() operation Laurent Pinchart
2019-07-07 18:19 ` [PATCH 41/60] drm/omap: dss: Remove .set_hdmi_mode() and .set_infoframe() operations Laurent Pinchart
2019-07-07 18:19 ` [PATCH 42/60] drm/omap: venc: Register a drm_bridge Laurent Pinchart
2019-07-07 18:19 ` [PATCH 43/60] drm/omap: Create connector for bridges Laurent Pinchart
2019-07-07 18:19 ` [PATCH 44/60] drm/omap: Switch the HDMI and VENC outputs to drm_bridge Laurent Pinchart
2019-07-07 18:19 ` [PATCH 45/60] drm/omap: Remove HPD, detect and EDID omapdss operations Laurent Pinchart
2019-07-07 18:19 ` [PATCH 46/60] drm/omap: hdmi: Remove omap_dss_device operations Laurent Pinchart
2019-07-07 18:19 ` [PATCH 47/60] drm/omap: venc: " Laurent Pinchart
2019-07-07 18:19 ` [PATCH 48/60] drm/omap: hdmi4: Simplify EDID read Laurent Pinchart
2019-07-07 18:19 ` [PATCH 49/60] drm/omap: hdmi5: " Laurent Pinchart
2019-07-07 18:19 ` Laurent Pinchart [this message]
2019-07-07 18:19 ` [PATCH 51/60] drm/omap: dpi: Sort includes alphabetically Laurent Pinchart
2019-07-07 18:19 ` [PATCH 52/60] drm/omap: dpi: Reorder functions in sections Laurent Pinchart
2019-07-07 18:19 ` [PATCH 53/60] drm/omap: dpi: Simplify clock setting API Laurent Pinchart
2019-07-07 18:19 ` [PATCH 54/60] drm/omap: dpi: Register a drm_bridge Laurent Pinchart
2019-07-07 18:19 ` [PATCH 55/60] drm/omap: sdi: Sort includes alphabetically Laurent Pinchart
2019-07-07 18:19 ` [PATCH 56/60] drm/omap: sdi: Register a drm_bridge Laurent Pinchart
2019-07-07 18:19 ` [PATCH 57/60] drm/omap: Simplify connector implementation Laurent Pinchart
2019-07-07 18:19 ` [PATCH 58/60] drm/omap: dss: Remove unused omap_dss_device operations Laurent Pinchart
2019-07-07 18:19 ` [PATCH 59/60] drm/omap: dss: Inline the omapdss_display_get() function Laurent Pinchart
2019-07-07 18:19 ` [PATCH 60/60] drm/omap: dss: Remove unused omapdss_of_find_connected_device() function Laurent Pinchart
2019-07-09 13:35 ` [PATCH 04/60] drm/bridge: dumb-vga-dac: Rename driver to simple-bridge Andrzej Hajda
2019-07-11 7:37 ` [PATCH 00/60] drm/omap: Replace custom display drivers with drm_bridge and drm_panel Daniel Vetter
2019-07-11 11:59 ` Sebastian Reichel
2019-08-08 14:26 ` Laurent Pinchart
2019-08-08 14:31 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190707181937.6250-47-laurent.pinchart@ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=maxime.ripard@bootlin.com \
--cc=sean@poorly.run \
--cc=sebastian.reichel@collabora.com \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.