[PATCH 09/60] drm/bridge: Add connector-related bridge operations and data

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: Maxime Ripard <maxime.ripard@bootlin.com>,
	Sebastian Reichel <sebastian.reichel@collabora.com>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Sean Paul <sean@poorly.run>
Subject: [PATCH 09/60] drm/bridge: Add connector-related bridge operations and data
Date: Sun,  7 Jul 2019 21:18:46 +0300	[thread overview]
Message-ID: <20190707181937.6250-6-laurent.pinchart@ideasonboard.com> (raw)
In-Reply-To: <20190707181937.6250-1-laurent.pinchart@ideasonboard.com>

To support implementation of DRM connectors on top of DRM bridges
instead of by bridges, the drm_bridge needs to expose new operations and
data:

- Output detection, hot-plug notification, mode retrieval and EDID
  retrieval operations
- Bitmask of supported operations
- Bridge output type

Add and document these.

Three new bridge helper functions are also added to handle hot plug
notification in a way that is as transparent as possible for the
bridges.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/gpu/drm/drm_bridge.c |  92 +++++++++++++++++++
 include/drm/drm_bridge.h     | 170 ++++++++++++++++++++++++++++++++++-
 2 files changed, 261 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_bridge.c b/drivers/gpu/drm/drm_bridge.c
index 519577f363e3..3c2a255df7af 100644
--- a/drivers/gpu/drm/drm_bridge.c
+++ b/drivers/gpu/drm/drm_bridge.c
@@ -70,6 +70,8 @@ static LIST_HEAD(bridge_list);
  */
 void drm_bridge_add(struct drm_bridge *bridge)
 {
+	mutex_init(&bridge->hpd_mutex);
+
 	mutex_lock(&bridge_lock);
 	list_add_tail(&bridge->list, &bridge_list);
 	mutex_unlock(&bridge_lock);
@@ -86,6 +88,8 @@ void drm_bridge_remove(struct drm_bridge *bridge)
 	mutex_lock(&bridge_lock);
 	list_del_init(&bridge->list);
 	mutex_unlock(&bridge_lock);
+
+	mutex_destroy(&bridge->hpd_mutex);
 }
 EXPORT_SYMBOL(drm_bridge_remove);
 
@@ -463,6 +467,94 @@ void drm_atomic_bridge_enable(struct drm_bridge *bridge,
 }
 EXPORT_SYMBOL(drm_atomic_bridge_enable);
 
+/**
+ * drm_bridge_hpd_enable - enable hot plug detection for the bridge
+ * @bridge: bridge control structure
+ * @cb: hot-plug detection callback
+ * @data: data to be passed to the hot-plug detection callback
+ *
+ * Call &drm_bridge_funcs.hpd_enable and register the given @cb and @data as
+ * hot plug notification callback. From now on the @cb will be called with
+ * @data when an output status change is detected by the bridge, until hot plug
+ * notification gets disabled with drm_bridge_hpd_disable().
+ *
+ * Hot plug detection is supported only if the DRM_BRIDGE_OP_HPD flag is set in
+ * bridge->ops. This function shall not be called when the flag is not set.
+ *
+ * Only one hot plug detection callback can be registered at a time, it is an
+ * error to call this function when hot plug detection is already enabled for
+ * the bridge.
+ */
+void drm_bridge_hpd_enable(struct drm_bridge *bridge,
+			   void (*cb)(void *data,
+				      enum drm_connector_status status),
+			   void *data)
+{
+	if (!bridge || !bridge->funcs->hpd_enable)
+		return;
+
+	mutex_lock(&bridge->hpd_mutex);
+
+	if (WARN(bridge->hpd_cb, "Hot plug detection already enabled\n"))
+		goto unlock;
+
+	bridge->hpd_cb = cb;
+	bridge->hpd_data = data;
+
+	bridge->funcs->hpd_enable(bridge);
+
+unlock:
+	mutex_unlock(&bridge->hpd_mutex);
+}
+EXPORT_SYMBOL_GPL(drm_bridge_hpd_enable);
+
+/**
+ * drm_bridge_hpd_disable - disable hot plug detection for the bridge
+ * @bridge: bridge control structure
+ *
+ * Call &drm_bridge_funcs.hpd_disable and unregister the hot plug detection
+ * callback previously registered with drm_bridge_hpd_enable(). Once this
+ * function returns the callback will not be called by the bridge when an
+ * output status change occurs.
+ *
+ * Hot plug detection is supported only if the DRM_BRIDGE_OP_HPD flag is set in
+ * bridge->ops. This function shall not be called when the flag is not set.
+ */
+void drm_bridge_hpd_disable(struct drm_bridge *bridge)
+{
+	if (!bridge || !bridge->funcs->hpd_disable)
+		return;
+
+	mutex_lock(&bridge->hpd_mutex);
+	bridge->funcs->hpd_disable(bridge);
+
+	bridge->hpd_cb = NULL;
+	bridge->hpd_data = NULL;
+	mutex_unlock(&bridge->hpd_mutex);
+}
+EXPORT_SYMBOL_GPL(drm_bridge_hpd_disable);
+
+/**
+ * drm_bridge_hpd_notify - notify hot plug detection events
+ * @bridge: bridge control structure
+ * @status: output connection status
+ *
+ * Bridge drivers shall call this function to report hot plug events when they
+ * detect a change in the output status, when hot plug detection has been
+ * enabled by the &drm_bridge_funcs.hpd_enable callback.
+ *
+ * This function shall be called in a context that can sleep.
+ */
+void drm_bridge_hpd_notify(struct drm_bridge *bridge,
+			   enum drm_connector_status status)
+{
+	mutex_lock(&bridge->hpd_mutex);
+	if (bridge->hpd_cb)
+		bridge->hpd_cb(bridge->hpd_data, status);
+	mutex_unlock(&bridge->hpd_mutex);
+}
+EXPORT_SYMBOL_GPL(drm_bridge_hpd_notify);
+
 #ifdef CONFIG_OF
 /**
  * of_drm_find_bridge - find the bridge corresponding to the device node in
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index 08dc15f93ded..b9445aa5b1ef 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -23,8 +23,9 @@
 #ifndef __DRM_BRIDGE_H__
 #define __DRM_BRIDGE_H__
 
-#include <linux/list.h>
 #include <linux/ctype.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
 #include <drm/drm_mode_object.h>
 #include <drm/drm_modes.h>
 
@@ -334,6 +335,110 @@ struct drm_bridge_funcs {
 	 */
 	void (*atomic_post_disable)(struct drm_bridge *bridge,
 				    struct drm_atomic_state *state);
+
+	/**
+	 * @detect:
+	 *
+	 * Check if anything is attached to the bridge output.
+	 *
+	 * This callback is optional, if not implemented the bridge will be
+	 * considered as always having a component attached to its output.
+	 * Bridges that implement this callback shall set the
+	 * DRM_BRIDGE_OP_DETECT flag in their &drm_bridge->ops.
+	 *
+	 * RETURNS:
+	 *
+	 * drm_connector_status indicating the bridge output status.
+	 */
+	enum drm_connector_status (*detect)(struct drm_bridge *bridge);
+
+	/**
+	 * @get_modes:
+	 *
+	 * Fill all modes currently valid for the sink into the &drm_connector
+	 * with drm_mode_probed_add().
+	 *
+	 * The @get_modes callback is mostly intended to support non-probable
+	 * displays such as many fixed panels. Bridges that support reading
+	 * EDID shall leave @get_modes unimplemented and implement the
+	 * &drm_bridge_funcs->get_edid callback instead.
+	 *
+	 * This callback is optional. Bridges that implement it shall set the
+	 * DRM_BRIDGE_OP_MODES flag in their &drm_bridge->ops.
+	 *
+	 * RETURNS:
+	 *
+	 * The number of modes added by calling drm_mode_probed_add().
+	 */
+	int (*get_modes)(struct drm_bridge *bridge,
+			 struct drm_connector *connector);
+
+	/**
+	 * @get_edid:
+	 *
+	 * Read and parse the EDID data of the connected display.
+	 *
+	 * The @get_edid callback is the preferred way of reporting mode
+	 * information for a display connected to the bridge output. Bridges
+	 * that support readind EDID shall implement this callback and leave
+	 * the @get_modes callback unimplemented.
+	 *
+	 * The caller of this operation shall first verify the output
+	 * connection status and refrain from reading EDID from a disconnected
+	 * output.
+	 *
+	 * This callback is optional. Bridges that implement it shall set the
+	 * DRM_BRIDGE_OP_EDID flag in their &drm_bridge->ops.
+	 *
+	 * RETURNS:
+	 *
+	 * An edid structure newly allocated with kmalloc() (or similar) on
+	 * success, or NULL otherwise. The caller is responsible for freeing
+	 * the returned edid structure with kfree().
+	 */
+	struct edid *(*get_edid)(struct drm_bridge *bridge,
+				 struct drm_connector *connector);
+
+	/**
+	 * @lost_hotplug:
+	 *
+	 * Notify the bridge of display disconnection.
+	 *
+	 * This callback is optional, it may be implemented by bridges that
+	 * need to be notified of display disconnection for internal reasons.
+	 * One use case is to reset the internal state of CEC controllers for
+	 * HDMI bridges.
+	 */
+	void (*lost_hotplug)(struct drm_bridge *bridge);
+
+	/**
+	 * @hpd_enable:
+	 *
+	 * Enable hot plug detection. From now on the bridge shall call
+	 * drm_bridge_hpd_notify() each time a change is detected in the output
+	 * connection status, until hot plug detection gets disabled with
+	 * @hpd_disable.
+	 *
+	 * This callback is optional and shall only be implemented by bridges
+	 * that support hot-plug notification without polling. Bridges that
+	 * implement it shall also implement the @hpd_disable callback and set
+	 * the DRM_BRIDGE_OP_HPD flag in their &drm_bridge->ops.
+	 */
+	void (*hpd_enable)(struct drm_bridge *bridge);
+
+	/**
+	 * @hpd_disable:
+	 *
+	 * Disable hot plug detection. Once this function returns the bridge
+	 * shall not call drm_bridge_hpd_notify() when a change in the output
+	 * connection status occurs.
+	 *
+	 * This callback is optional and shall only be implemented by bridges
+	 * that support hot-plug notification without polling. Bridges that
+	 * implement it shall also implement the @hpd_enable callback and set
+	 * the DRM_BRIDGE_OP_HPD flag in their &drm_bridge->ops.
+	 */
+	void (*hpd_disable)(struct drm_bridge *bridge);
 };
 
 /**
@@ -372,6 +477,38 @@ struct drm_bridge_timings {
 	bool dual_link;
 };
 
+/**
+ * enum drm_bridge_ops - Bitmask of operations supported by the bridge
+ */
+enum drm_bridge_ops {
+	/**
+	 * @DRM_BRIDGE_OP_DETECT: The bridge can detect displays connected to
+	 * its output. Bridges that set this flag shall implement the
+	 * &drm_bridge_funcs->detect callback.
+	 */
+	DRM_BRIDGE_OP_DETECT = BIT(0),
+	/**
+	 * @DRM_BRIDGE_OP_EDID: The bridge can retrieve the EDID of the display
+	 * connected to its output. Bridges that set this flag shall implement
+	 * the &drm_bridge_funcs->get_edid callback.
+	 */
+	DRM_BRIDGE_OP_EDID = BIT(1),
+	/**
+	 * @DRM_BRIDGE_OP_HPD: The bridge can detect hot-plug and hot-unplug
+	 * without requiring polling. Bridges that set this flag shall
+	 * implement the &drm_bridge_funcs->hpd_enable and
+	 * &drm_bridge_funcs->disable_hpd_cb callbacks.
+	 */
+	DRM_BRIDGE_OP_HPD = BIT(2),
+	/**
+	 * @DRM_BRIDGE_OP_MODES: The bridge can retrieving the modes supported
+	 * by the display at its output. This does not include readind EDID
+	 * which is separately covered by @DRM_BRIDGE_OP_EDID. Bridges that set
+	 * this flag shall implement the &drm_bridge_funcs->get_modes callback.
+	 */
+	DRM_BRIDGE_OP_MODES = BIT(3),
+};
+
 /**
  * struct drm_bridge - central DRM bridge control structure
  */
@@ -398,6 +535,29 @@ struct drm_bridge {
 	const struct drm_bridge_funcs *funcs;
 	/** @driver_private: pointer to the bridge driver's internal context */
 	void *driver_private;
+	/** @ops: bitmask of operations supported by the bridge */
+	enum drm_bridge_ops ops;
+	/**
+	 * @type: Type of the connection at the bridge output
+	 * (DRM_MODE_CONNECTOR_*). For bridges at the end of this chain this
+	 * identifies the type of connected display.
+	 */
+	int type;
+	/** private: */
+	/**
+	 * @hpd_mutex: Protects the @hpd_cb and @hpd_data fields.
+	 */
+	struct mutex hpd_mutex;
+	/**
+	 * @hpd_cb: Hot plug detection callback, registered with
+	 * drm_bridge_hpd_enable().
+	 */
+	void (*hpd_cb)(void *data, enum drm_connector_status status);
+	/**
+	 * @hpd_data: Private data passed to the Hot plug detection callback
+	 * @hpd_cb.
+	 */
+	void *hpd_data;
 };
 
 void drm_bridge_add(struct drm_bridge *bridge);
@@ -428,6 +588,14 @@ void drm_atomic_bridge_pre_enable(struct drm_bridge *bridge,
 void drm_atomic_bridge_enable(struct drm_bridge *bridge,
 			      struct drm_atomic_state *state);
 
+void drm_bridge_hpd_enable(struct drm_bridge *bridge,
+			   void (*cb)(void *data,
+				      enum drm_connector_status status),
+			   void *data);
+void drm_bridge_hpd_disable(struct drm_bridge *bridge);
+void drm_bridge_hpd_notify(struct drm_bridge *bridge,
+			   enum drm_connector_status status);
+
 #ifdef CONFIG_DRM_PANEL_BRIDGE
 struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel,
 					u32 connector_type);
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
