From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
To: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>
Cc: <lars@metafoo.de>, <lgirdwood@gmail.com>, <broonie@kernel.org>,
<perex@perex.cz>, <tiwai@suse.com>,
Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
Tzung-Bi Shih <tzungbi@google.com>
Subject: [PATCH] ASoC: codecs: ad193x: Use regmap_multi_reg_write() when initializing
Date: Wed, 10 Jul 2019 13:51:19 +0300 [thread overview]
Message-ID: <20190710105119.22987-1-codrin.ciubotariu@microchip.com> (raw)
Using regmap_multi_reg_write() when we set the default values for our
registers makes the code smaller and easier to read.
Suggested-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
sound/soc/codecs/ad193x.c | 19 +++++--------------
1 file changed, 5 insertions(+), 14 deletions(-)
diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c
index 80dab5df9633..fb04c9379b71 100644
--- a/sound/soc/codecs/ad193x.c
+++ b/sound/soc/codecs/ad193x.c
@@ -413,15 +413,10 @@ static struct snd_soc_dai_driver ad193x_no_adc_dai = {
.ops = &ad193x_dai_ops,
};
-struct ad193x_reg_default {
- unsigned int reg;
- unsigned int val;
-};
-
/* codec register values to set after reset */
static void ad193x_reg_default_init(struct ad193x_priv *ad193x)
{
- const struct ad193x_reg_default reg_init[] = {
+ const struct reg_sequence reg_init[] = {
{ 0, 0x99 }, /* PLL_CLK_CTRL0: pll input: mclki/xi 12.288Mhz */
{ 1, 0x04 }, /* PLL_CLK_CTRL1: no on-chip Vref */
{ 2, 0x40 }, /* DAC_CTRL0: TDM mode */
@@ -437,21 +432,17 @@ static void ad193x_reg_default_init(struct ad193x_priv *ad193x)
{ 12, 0x00 }, /* DAC_L4_VOL: no attenuation */
{ 13, 0x00 }, /* DAC_R4_VOL: no attenuation */
};
- const struct ad193x_reg_default reg_adc_init[] = {
+ const struct reg_sequence reg_adc_init[] = {
{ 14, 0x03 }, /* ADC_CTRL0: high-pass filter enable */
{ 15, 0x43 }, /* ADC_CTRL1: sata delay=1, adc aux mode */
{ 16, 0x00 }, /* ADC_CTRL2: reset */
};
- int i;
- for (i = 0; i < ARRAY_SIZE(reg_init); i++)
- regmap_write(ad193x->regmap, reg_init[i].reg, reg_init[i].val);
+ regmap_multi_reg_write(ad193x->regmap, reg_init, ARRAY_SIZE(reg_init));
if (ad193x_has_adc(ad193x)) {
- for (i = 0; i < ARRAY_SIZE(reg_adc_init); i++) {
- regmap_write(ad193x->regmap, reg_adc_init[i].reg,
- reg_adc_init[i].val);
- }
+ regmap_multi_reg_write(ad193x->regmap, reg_adc_init,
+ ARRAY_SIZE(reg_adc_init));
}
}
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
To: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Cc: lars@metafoo.de, lgirdwood@gmail.com, broonie@kernel.org,
perex@perex.cz, tiwai@suse.com,
Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
Tzung-Bi Shih <tzungbi@google.com>
Subject: [PATCH] ASoC: codecs: ad193x: Use regmap_multi_reg_write() when initializing
Date: Wed, 10 Jul 2019 13:51:19 +0300 [thread overview]
Message-ID: <20190710105119.22987-1-codrin.ciubotariu@microchip.com> (raw)
Using regmap_multi_reg_write() when we set the default values for our
registers makes the code smaller and easier to read.
Suggested-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---
sound/soc/codecs/ad193x.c | 19 +++++--------------
1 file changed, 5 insertions(+), 14 deletions(-)
diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c
index 80dab5df9633..fb04c9379b71 100644
--- a/sound/soc/codecs/ad193x.c
+++ b/sound/soc/codecs/ad193x.c
@@ -413,15 +413,10 @@ static struct snd_soc_dai_driver ad193x_no_adc_dai = {
.ops = &ad193x_dai_ops,
};
-struct ad193x_reg_default {
- unsigned int reg;
- unsigned int val;
-};
-
/* codec register values to set after reset */
static void ad193x_reg_default_init(struct ad193x_priv *ad193x)
{
- const struct ad193x_reg_default reg_init[] = {
+ const struct reg_sequence reg_init[] = {
{ 0, 0x99 }, /* PLL_CLK_CTRL0: pll input: mclki/xi 12.288Mhz */
{ 1, 0x04 }, /* PLL_CLK_CTRL1: no on-chip Vref */
{ 2, 0x40 }, /* DAC_CTRL0: TDM mode */
@@ -437,21 +432,17 @@ static void ad193x_reg_default_init(struct ad193x_priv *ad193x)
{ 12, 0x00 }, /* DAC_L4_VOL: no attenuation */
{ 13, 0x00 }, /* DAC_R4_VOL: no attenuation */
};
- const struct ad193x_reg_default reg_adc_init[] = {
+ const struct reg_sequence reg_adc_init[] = {
{ 14, 0x03 }, /* ADC_CTRL0: high-pass filter enable */
{ 15, 0x43 }, /* ADC_CTRL1: sata delay=1, adc aux mode */
{ 16, 0x00 }, /* ADC_CTRL2: reset */
};
- int i;
- for (i = 0; i < ARRAY_SIZE(reg_init); i++)
- regmap_write(ad193x->regmap, reg_init[i].reg, reg_init[i].val);
+ regmap_multi_reg_write(ad193x->regmap, reg_init, ARRAY_SIZE(reg_init));
if (ad193x_has_adc(ad193x)) {
- for (i = 0; i < ARRAY_SIZE(reg_adc_init); i++) {
- regmap_write(ad193x->regmap, reg_adc_init[i].reg,
- reg_adc_init[i].val);
- }
+ regmap_multi_reg_write(ad193x->regmap, reg_adc_init,
+ ARRAY_SIZE(reg_adc_init));
}
}
--
2.20.1
next reply other threads:[~2019-07-10 10:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-10 10:51 Codrin Ciubotariu [this message]
2019-07-10 10:51 ` [PATCH] ASoC: codecs: ad193x: Use regmap_multi_reg_write() when initializing Codrin Ciubotariu
2019-07-11 0:56 ` Tzung-Bi Shih
2019-07-22 12:22 ` Applied "ASoC: codecs: ad193x: Use regmap_multi_reg_write() when initializing" to the asoc tree Mark Brown
2019-07-22 12:22 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190710105119.22987-1-codrin.ciubotariu@microchip.com \
--to=codrin.ciubotariu@microchip.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lars@metafoo.de \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=tzungbi@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.