From: Sven Eckelmann <sven@narfation.org>
To: linux-wireless@vger.kernel.org
Cc: ath11k@lists.infradead.org, Sven Eckelmann <seckelmann@datto.com>
Subject: [PATCH 2/2] mac80211_hwsim: Register support for HE meshpoint
Date: Wed, 24 Jul 2019 18:33:57 +0200 [thread overview]
Message-ID: <20190724163359.3507-3-sven@narfation.org> (raw)
In-Reply-To: <20190724163359.3507-1-sven@narfation.org>
From: Sven Eckelmann <seckelmann@datto.com>
Some features of 802.11ax without central organizing (AP) STA can also be
used in mesh mode. hwsim can be used to assist initial development of these
features without having access to HW.
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
Forwarded: https://patchwork.kernel.org/patch/11029301/
---
drivers/net/wireless/mac80211_hwsim.c | 283 +++++++++++++++++---------
1 file changed, 189 insertions(+), 94 deletions(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 519b4ee88c5c..a3913b75d715 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2496,116 +2496,211 @@ static void hwsim_mcast_new_radio(int id, struct genl_info *info,
nlmsg_free(mcast_skb);
}
-static const struct ieee80211_sband_iftype_data he_capa_2ghz = {
- /* TODO: should we support other types, e.g., P2P?*/
- .types_mask = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP),
- .he_cap = {
- .has_he = true,
- .he_cap_elem = {
- .mac_cap_info[0] =
- IEEE80211_HE_MAC_CAP0_HTC_HE,
- .mac_cap_info[1] =
- IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
- IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
- .mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR |
- IEEE80211_HE_MAC_CAP2_MU_CASCADING |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
- .mac_cap_info[3] =
- IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
- IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
- .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
- .phy_cap_info[1] =
- IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
- IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
- IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
- IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
- .phy_cap_info[2] =
- IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
- IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
- IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
-
- /* Leave all the other PHY capability bytes unset, as
- * DCM, beam forming, RU and PPE threshold information
- * are not supported
- */
+static const struct ieee80211_sband_iftype_data he_capa_2ghz[] = {
+ {
+ /* TODO: should we support other types, e.g., P2P?*/
+ .types_mask = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_BSR |
+ IEEE80211_HE_MAC_CAP2_MU_CASCADING |
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] =
+ IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
+ IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+ IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xffff),
+ .tx_mcs_160 = cpu_to_le16(0xffff),
+ .rx_mcs_80p80 = cpu_to_le16(0xffff),
+ .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
},
- .he_mcs_nss_supp = {
- .rx_mcs_80 = cpu_to_le16(0xfffa),
- .tx_mcs_80 = cpu_to_le16(0xfffa),
- .rx_mcs_160 = cpu_to_le16(0xffff),
- .tx_mcs_160 = cpu_to_le16(0xffff),
- .rx_mcs_80p80 = cpu_to_le16(0xffff),
- .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
+#ifdef CONFIG_MAC80211_MESH
+ {
+ /* TODO: should we support other types, e.g., IBSS?*/
+ .types_mask = BIT(NL80211_IFTYPE_MESH_POINT),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] = 0,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xffff),
+ .tx_mcs_160 = cpu_to_le16(0xffff),
+ .rx_mcs_80p80 = cpu_to_le16(0xffff),
+ .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
},
},
+#endif
};
-static const struct ieee80211_sband_iftype_data he_capa_5ghz = {
- /* TODO: should we support other types, e.g., P2P?*/
- .types_mask = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP),
- .he_cap = {
- .has_he = true,
- .he_cap_elem = {
- .mac_cap_info[0] =
- IEEE80211_HE_MAC_CAP0_HTC_HE,
- .mac_cap_info[1] =
- IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
- IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
- .mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR |
- IEEE80211_HE_MAC_CAP2_MU_CASCADING |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
- .mac_cap_info[3] =
- IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
- IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
- .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
- .phy_cap_info[0] =
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
- .phy_cap_info[1] =
- IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
- IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
- IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
- IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
- .phy_cap_info[2] =
- IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
- IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
- IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
-
- /* Leave all the other PHY capability bytes unset, as
- * DCM, beam forming, RU and PPE threshold information
- * are not supported
- */
+static const struct ieee80211_sband_iftype_data he_capa_5ghz[] = {
+ {
+ /* TODO: should we support other types, e.g., P2P?*/
+ .types_mask = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_BSR |
+ IEEE80211_HE_MAC_CAP2_MU_CASCADING |
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[0] =
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] =
+ IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
+ IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+ IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xfffa),
+ .tx_mcs_160 = cpu_to_le16(0xfffa),
+ .rx_mcs_80p80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
},
- .he_mcs_nss_supp = {
- .rx_mcs_80 = cpu_to_le16(0xfffa),
- .tx_mcs_80 = cpu_to_le16(0xfffa),
- .rx_mcs_160 = cpu_to_le16(0xfffa),
- .tx_mcs_160 = cpu_to_le16(0xfffa),
- .rx_mcs_80p80 = cpu_to_le16(0xfffa),
- .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
+#ifdef CONFIG_MAC80211_MESH
+ {
+ /* TODO: should we support other types, e.g., IBSS?*/
+ .types_mask = BIT(NL80211_IFTYPE_MESH_POINT),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[0] =
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] = 0,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xfffa),
+ .tx_mcs_160 = cpu_to_le16(0xfffa),
+ .rx_mcs_80p80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
},
},
+#endif
};
static void mac80211_hswim_he_capab(struct ieee80211_supported_band *sband)
{
- if (sband->band == NL80211_BAND_2GHZ)
+ u16 n_iftype_data;
+
+ if (sband->band == NL80211_BAND_2GHZ) {
+ n_iftype_data = ARRAY_SIZE(he_capa_2ghz);
sband->iftype_data =
- (struct ieee80211_sband_iftype_data *)&he_capa_2ghz;
- else if (sband->band == NL80211_BAND_5GHZ)
+ (struct ieee80211_sband_iftype_data *)he_capa_2ghz;
+ } else if (sband->band == NL80211_BAND_5GHZ) {
+ n_iftype_data = ARRAY_SIZE(he_capa_5ghz);
sband->iftype_data =
- (struct ieee80211_sband_iftype_data *)&he_capa_5ghz;
- else
+ (struct ieee80211_sband_iftype_data *)he_capa_5ghz;
+ } else {
return;
+ }
- sband->n_iftype_data = 1;
+ sband->n_iftype_data = n_iftype_data;
}
#ifdef CONFIG_MAC80211_MESH
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Sven Eckelmann <sven@narfation.org>
To: linux-wireless@vger.kernel.org
Cc: ath11k@lists.infradead.org, Sven Eckelmann <seckelmann@datto.com>
Subject: [PATCH 2/2] mac80211_hwsim: Register support for HE meshpoint
Date: Wed, 24 Jul 2019 18:33:57 +0200 [thread overview]
Message-ID: <20190724163359.3507-3-sven@narfation.org> (raw)
In-Reply-To: <20190724163359.3507-1-sven@narfation.org>
From: Sven Eckelmann <seckelmann@datto.com>
Some features of 802.11ax without central organizing (AP) STA can also be
used in mesh mode. hwsim can be used to assist initial development of these
features without having access to HW.
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
Forwarded: https://patchwork.kernel.org/patch/11029301/
---
drivers/net/wireless/mac80211_hwsim.c | 283 +++++++++++++++++---------
1 file changed, 189 insertions(+), 94 deletions(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 519b4ee88c5c..a3913b75d715 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2496,116 +2496,211 @@ static void hwsim_mcast_new_radio(int id, struct genl_info *info,
nlmsg_free(mcast_skb);
}
-static const struct ieee80211_sband_iftype_data he_capa_2ghz = {
- /* TODO: should we support other types, e.g., P2P?*/
- .types_mask = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP),
- .he_cap = {
- .has_he = true,
- .he_cap_elem = {
- .mac_cap_info[0] =
- IEEE80211_HE_MAC_CAP0_HTC_HE,
- .mac_cap_info[1] =
- IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
- IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
- .mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR |
- IEEE80211_HE_MAC_CAP2_MU_CASCADING |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
- .mac_cap_info[3] =
- IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
- IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
- .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
- .phy_cap_info[1] =
- IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
- IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
- IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
- IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
- .phy_cap_info[2] =
- IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
- IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
- IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
-
- /* Leave all the other PHY capability bytes unset, as
- * DCM, beam forming, RU and PPE threshold information
- * are not supported
- */
+static const struct ieee80211_sband_iftype_data he_capa_2ghz[] = {
+ {
+ /* TODO: should we support other types, e.g., P2P?*/
+ .types_mask = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_BSR |
+ IEEE80211_HE_MAC_CAP2_MU_CASCADING |
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] =
+ IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
+ IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+ IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xffff),
+ .tx_mcs_160 = cpu_to_le16(0xffff),
+ .rx_mcs_80p80 = cpu_to_le16(0xffff),
+ .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
},
- .he_mcs_nss_supp = {
- .rx_mcs_80 = cpu_to_le16(0xfffa),
- .tx_mcs_80 = cpu_to_le16(0xfffa),
- .rx_mcs_160 = cpu_to_le16(0xffff),
- .tx_mcs_160 = cpu_to_le16(0xffff),
- .rx_mcs_80p80 = cpu_to_le16(0xffff),
- .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
+#ifdef CONFIG_MAC80211_MESH
+ {
+ /* TODO: should we support other types, e.g., IBSS?*/
+ .types_mask = BIT(NL80211_IFTYPE_MESH_POINT),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] = 0,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xffff),
+ .tx_mcs_160 = cpu_to_le16(0xffff),
+ .rx_mcs_80p80 = cpu_to_le16(0xffff),
+ .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
},
},
+#endif
};
-static const struct ieee80211_sband_iftype_data he_capa_5ghz = {
- /* TODO: should we support other types, e.g., P2P?*/
- .types_mask = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP),
- .he_cap = {
- .has_he = true,
- .he_cap_elem = {
- .mac_cap_info[0] =
- IEEE80211_HE_MAC_CAP0_HTC_HE,
- .mac_cap_info[1] =
- IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
- IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
- .mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR |
- IEEE80211_HE_MAC_CAP2_MU_CASCADING |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
- .mac_cap_info[3] =
- IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
- IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
- .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
- .phy_cap_info[0] =
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
- .phy_cap_info[1] =
- IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
- IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
- IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
- IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
- .phy_cap_info[2] =
- IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
- IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
- IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
-
- /* Leave all the other PHY capability bytes unset, as
- * DCM, beam forming, RU and PPE threshold information
- * are not supported
- */
+static const struct ieee80211_sband_iftype_data he_capa_5ghz[] = {
+ {
+ /* TODO: should we support other types, e.g., P2P?*/
+ .types_mask = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_BSR |
+ IEEE80211_HE_MAC_CAP2_MU_CASCADING |
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[0] =
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] =
+ IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
+ IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+ IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xfffa),
+ .tx_mcs_160 = cpu_to_le16(0xfffa),
+ .rx_mcs_80p80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
},
- .he_mcs_nss_supp = {
- .rx_mcs_80 = cpu_to_le16(0xfffa),
- .tx_mcs_80 = cpu_to_le16(0xfffa),
- .rx_mcs_160 = cpu_to_le16(0xfffa),
- .tx_mcs_160 = cpu_to_le16(0xfffa),
- .rx_mcs_80p80 = cpu_to_le16(0xfffa),
- .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
+#ifdef CONFIG_MAC80211_MESH
+ {
+ /* TODO: should we support other types, e.g., IBSS?*/
+ .types_mask = BIT(NL80211_IFTYPE_MESH_POINT),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[0] =
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] = 0,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xfffa),
+ .tx_mcs_160 = cpu_to_le16(0xfffa),
+ .rx_mcs_80p80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
},
},
+#endif
};
static void mac80211_hswim_he_capab(struct ieee80211_supported_band *sband)
{
- if (sband->band == NL80211_BAND_2GHZ)
+ u16 n_iftype_data;
+
+ if (sband->band == NL80211_BAND_2GHZ) {
+ n_iftype_data = ARRAY_SIZE(he_capa_2ghz);
sband->iftype_data =
- (struct ieee80211_sband_iftype_data *)&he_capa_2ghz;
- else if (sband->band == NL80211_BAND_5GHZ)
+ (struct ieee80211_sband_iftype_data *)he_capa_2ghz;
+ } else if (sband->band == NL80211_BAND_5GHZ) {
+ n_iftype_data = ARRAY_SIZE(he_capa_5ghz);
sband->iftype_data =
- (struct ieee80211_sband_iftype_data *)&he_capa_5ghz;
- else
+ (struct ieee80211_sband_iftype_data *)he_capa_5ghz;
+ } else {
return;
+ }
- sband->n_iftype_data = 1;
+ sband->n_iftype_data = n_iftype_data;
}
#ifdef CONFIG_MAC80211_MESH
--
2.20.1
_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2019-07-24 16:34 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-24 16:33 [PATCH v5 0/4] mac80211/ath11k: HE mesh support Sven Eckelmann
2019-07-24 16:33 ` Sven Eckelmann
2019-07-24 16:33 ` [PATCH 1/2] mac80211: implement HE support for mesh Sven Eckelmann
2019-07-24 16:33 ` Sven Eckelmann
2019-07-24 16:33 ` Sven Eckelmann [this message]
2019-07-24 16:33 ` [PATCH 2/2] mac80211_hwsim: Register support for HE meshpoint Sven Eckelmann
2019-07-26 13:26 ` Johannes Berg
2019-07-26 13:26 ` Johannes Berg
2019-07-26 13:31 ` Sven Eckelmann
2019-07-26 13:31 ` Sven Eckelmann
2019-07-26 13:32 ` Johannes Berg
2019-07-26 13:32 ` Johannes Berg
2019-08-12 15:41 ` Sven Eckelmann
2019-08-12 15:41 ` Sven Eckelmann
2019-07-24 16:33 ` [PATCH v5 3/4] ath11k: register HE mesh capabilities Sven Eckelmann
2019-07-24 16:33 ` Sven Eckelmann
2019-07-24 16:33 ` [PATCH v5 4/4] ath11k: Disable SU support in meshpoint mode Sven Eckelmann
2019-07-24 16:33 ` Sven Eckelmann
2019-07-24 16:38 ` [PATCH v5 0/4] mac80211/ath11k: HE mesh support Sven Eckelmann
2019-07-24 16:38 ` Sven Eckelmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190724163359.3507-3-sven@narfation.org \
--to=sven@narfation.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=seckelmann@datto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.