From: Philippe Schenker <philippe.schenker@toradex.com>
To: "Marcel Ziswiler" <marcel.ziswiler@toradex.com>,
"Max Krummenacher" <max.krummenacher@toradex.com>,
"stefan@agner.ch" <stefan@agner.ch>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Michal Vokáč" <michal.vokac@ysoft.com>,
"Fabio Estevam" <festevam@gmail.com>
Cc: Philippe Schenker <philippe.schenker@toradex.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>
Subject: [PATCH v2 03/20] ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
Date: Wed, 31 Jul 2019 12:38:05 +0000 [thread overview]
Message-ID: <20190731123750.25670-4-philippe.schenker@toradex.com> (raw)
In-Reply-To: <20190731123750.25670-1-philippe.schenker@toradex.com>
Prepare FlexCAN use on SODIMM 55/63 178/188. Those SODIMM pins are
compatible for CAN bus use with several modules from the Colibri
family.
Add Better drivestrength and also add flexcan2.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
Changes in v2: None
arch/arm/boot/dts/imx7-colibri.dtsi | 35 ++++++++++++++++++++++++-----
1 file changed, 30 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index f7c9ce5bed47..52046085ce6f 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -117,6 +117,18 @@
fsl,magic-packet;
};
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "disabled";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "disabled";
+};
+
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -330,12 +342,11 @@
&iomuxc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
+ pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
+ &pinctrl_gpio7>;
pinctrl_gpio1: gpio1-grp {
fsl,pins = <
- MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */
- MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x74 /* SODIMM 63 */
MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */
MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */
MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */
@@ -416,6 +427,13 @@
>;
};
+ pinctrl_gpio7: gpio7-grp { /* Alternatively CAN1 */
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */
+ MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */
+ >;
+ };
+
pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
fsl,pins = <
MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79
@@ -459,10 +477,17 @@
>;
};
+ pinctrl_flexcan1: flexcan1-grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x79 /* SODIMM 55 */
+ MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x79 /* SODIMM 63 */
+ >;
+ };
+
pinctrl_flexcan2: flexcan2-grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
- MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x79 /* SODIMM 188 */
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x79 /* SODIMM 178 */
>;
};
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Philippe Schenker <philippe.schenker@toradex.com>
To: "Marcel Ziswiler" <marcel.ziswiler@toradex.com>,
"Max Krummenacher" <max.krummenacher@toradex.com>,
"stefan@agner.ch" <stefan@agner.ch>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Michal Vokáč" <michal.vokac@ysoft.com>,
"Fabio Estevam" <festevam@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Philippe Schenker <philippe.schenker@toradex.com>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v2 03/20] ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
Date: Wed, 31 Jul 2019 12:38:05 +0000 [thread overview]
Message-ID: <20190731123750.25670-4-philippe.schenker@toradex.com> (raw)
In-Reply-To: <20190731123750.25670-1-philippe.schenker@toradex.com>
Prepare FlexCAN use on SODIMM 55/63 178/188. Those SODIMM pins are
compatible for CAN bus use with several modules from the Colibri
family.
Add Better drivestrength and also add flexcan2.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
Changes in v2: None
arch/arm/boot/dts/imx7-colibri.dtsi | 35 ++++++++++++++++++++++++-----
1 file changed, 30 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index f7c9ce5bed47..52046085ce6f 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -117,6 +117,18 @@
fsl,magic-packet;
};
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "disabled";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "disabled";
+};
+
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -330,12 +342,11 @@
&iomuxc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
+ pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
+ &pinctrl_gpio7>;
pinctrl_gpio1: gpio1-grp {
fsl,pins = <
- MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */
- MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x74 /* SODIMM 63 */
MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */
MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */
MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */
@@ -416,6 +427,13 @@
>;
};
+ pinctrl_gpio7: gpio7-grp { /* Alternatively CAN1 */
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */
+ MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */
+ >;
+ };
+
pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
fsl,pins = <
MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79
@@ -459,10 +477,17 @@
>;
};
+ pinctrl_flexcan1: flexcan1-grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x79 /* SODIMM 55 */
+ MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x79 /* SODIMM 63 */
+ >;
+ };
+
pinctrl_flexcan2: flexcan2-grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
- MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x79 /* SODIMM 188 */
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x79 /* SODIMM 178 */
>;
};
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Philippe Schenker <philippe.schenker@toradex.com>
To: "Marcel Ziswiler" <marcel.ziswiler@toradex.com>,
"Max Krummenacher" <max.krummenacher@toradex.com>,
"stefan@agner.ch" <stefan@agner.ch>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Mark Rutland" <mark.rutland@arm.com>,
"Michal Vokáč" <michal.vokac@ysoft.com>,
"Fabio Estevam" <festevam@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Philippe Schenker <philippe.schenker@toradex.com>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v2 03/20] ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
Date: Wed, 31 Jul 2019 12:38:05 +0000 [thread overview]
Message-ID: <20190731123750.25670-4-philippe.schenker@toradex.com> (raw)
In-Reply-To: <20190731123750.25670-1-philippe.schenker@toradex.com>
Prepare FlexCAN use on SODIMM 55/63 178/188. Those SODIMM pins are
compatible for CAN bus use with several modules from the Colibri
family.
Add Better drivestrength and also add flexcan2.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
Changes in v2: None
arch/arm/boot/dts/imx7-colibri.dtsi | 35 ++++++++++++++++++++++++-----
1 file changed, 30 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index f7c9ce5bed47..52046085ce6f 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -117,6 +117,18 @@
fsl,magic-packet;
};
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "disabled";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "disabled";
+};
+
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -330,12 +342,11 @@
&iomuxc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
+ pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
+ &pinctrl_gpio7>;
pinctrl_gpio1: gpio1-grp {
fsl,pins = <
- MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x74 /* SODIMM 55 */
- MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x74 /* SODIMM 63 */
MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x14 /* SODIMM 77 */
MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */
MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x74 /* SODIMM 91 */
@@ -416,6 +427,13 @@
>;
};
+ pinctrl_gpio7: gpio7-grp { /* Alternatively CAN1 */
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */
+ MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */
+ >;
+ };
+
pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
fsl,pins = <
MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79
@@ -459,10 +477,17 @@
>;
};
+ pinctrl_flexcan1: flexcan1-grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x79 /* SODIMM 55 */
+ MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x79 /* SODIMM 63 */
+ >;
+ };
+
pinctrl_flexcan2: flexcan2-grp {
fsl,pins = <
- MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
- MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x79 /* SODIMM 188 */
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x79 /* SODIMM 178 */
>;
};
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-07-31 12:39 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-31 12:37 [PATCH v2 00/20] Common patches from downstream development Philippe Schenker
2019-07-31 12:37 ` Philippe Schenker
2019-07-31 12:37 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 01/20] ARM: dts: imx7-colibri: make sure module supplies are always on Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 02/20] ARM: dts: imx7-colibri: disable HS400 Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker [this message]
2019-07-31 12:38 ` [PATCH v2 03/20] ARM: dts: imx7-colibri: prepare module device tree for FlexCAN Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 04/20] ARM: dts: imx7-colibri: Add sleep mode to ethernet Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 05/20] ARM: dts: add recovery for I2C for iMX7 Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 06/20] ARM: dts: imx7-colibri: add GPIO wakeup key Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 07/20] ARM: dts: imx7-colibri: fix 1.8V/UHS support Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:56 ` Fabio Estevam
2019-07-31 12:56 ` Fabio Estevam
2019-07-31 14:52 ` Philippe Schenker
2019-07-31 14:52 ` Philippe Schenker
2019-07-31 14:52 ` Philippe Schenker
2019-08-02 8:51 ` Stefan Agner
2019-08-02 8:51 ` Stefan Agner
2019-08-05 7:18 ` Philippe Schenker
2019-08-05 7:18 ` Philippe Schenker
2019-08-05 7:18 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 08/20] ARM: dts: imx7-colibri: Add touch controllers Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:42 ` Fabio Estevam
2019-07-31 12:42 ` Fabio Estevam
2019-07-31 14:39 ` Philippe Schenker
2019-07-31 14:39 ` Philippe Schenker
2019-07-31 14:39 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 09/20] ARM: dts: imx6qdl-colibri: add phy to fec Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 10/20] ARM: dts: imx6qdl-colibri: Add missing pin declaration in iomuxc Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 11/20] ARM: dts: imx6qdl-apalis: Add sleep state to can interfaces Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 12/20] ARM: dts: imx6: Add touchscreens used on Toradex eval boards Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 13/20] ARM: dts: imx6-colibri: Add missing pinmuxing to Toradex eval board Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 14/20] ARM: dts: imx6ull-colibri: Add sleep mode to fec Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 15/20] ARM: dts: imx6ull-colibri: reduce v_batt current in power off Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 16/20] ARM: dts: imx6ull-colibri: Add watchdog Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 17/20] ARM: dts: imx6ull: improve can templates Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 18/20] ARM: dts: imx6ull-colibri: Add general wakeup key used on Colibri Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 19/20] ARM: dts: imx6/7-colibri: switch dr_mode to otg Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` [PATCH v2 20/20] ARM: dts: imx6ull-colibri: Add touchscreen used with Eval Board Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
2019-07-31 12:38 ` Philippe Schenker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190731123750.25670-4-philippe.schenker@toradex.com \
--to=philippe.schenker@toradex.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=mark.rutland@arm.com \
--cc=max.krummenacher@toradex.com \
--cc=michal.vokac@ysoft.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.