All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan-gabriel Mirea <stefan-gabriel.mirea@nxp.com>
To: "corbet@lwn.net" <corbet@lwn.net>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
	"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
	"will@kernel.org" <will@kernel.org>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	Leo Li <leoyang.li@nxp.com>
Cc: "jslaby@suse.com" <jslaby@suse.com>,
	"linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-serial@vger.kernel.org" <linux-serial@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	Cosmin Stefan Stoica <cosmin.stoica@nxp.com>,
	Larisa Ileana Grigore <larisa.grigore@nxp.com>
Subject: [PATCH 4/6] dt-bindings: serial: Document Freescale LINFlex UART
Date: Fri, 2 Aug 2019 19:47:21 +0000	[thread overview]
Message-ID: <20190802194702.30249-5-stefan-gabriel.mirea@nxp.com> (raw)
In-Reply-To: <20190802194702.30249-1-stefan-gabriel.mirea@nxp.com>

From: Stoica Cosmin-Stefan <cosmin.stoica@nxp.com>

Add documentation for the serial communication interface module (LINFlex),
found in two instances on S32V234.

Signed-off-by: Stoica Cosmin-Stefan <cosmin.stoica@nxp.com>
Signed-off-by: Larisa Grigore <Larisa.Grigore@nxp.com>
Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
---
 .../bindings/serial/fsl,s32-linflexuart.txt   | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt
new file mode 100644
index 000000000000..957ffeaca9f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt
@@ -0,0 +1,24 @@
+* Freescale Linflex UART
+
+The LINFlexD controller implements several LIN protocol versions, as well as
+support for full-duplex UART communication through 8-bit and 9-bit frames. The
+Linflex UART driver enables operation only in UART mode.
+
+See chapter 47 ("LINFlexD") in the reference manual[1].
+
+Required properties:
+- compatible :
+  - "fsl,s32-linflexuart" for linflex configured in uart mode which
+  is compatible with the one integrated on S32V234 SoC
+- reg : Address and length of the register set for the device
+- interrupts : Should contain uart interrupt
+
+Example:
+uart0:serial@40053000 {
+	compatible = "fsl,s32-linflexuart";
+	reg = <0x0 0x40053000 0x0 0x1000>;
+	interrupts = <0 59 4>;
+	status = "disabled";
+};
+
+[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM
-- 
2.22.0


WARNING: multiple messages have this Message-ID (diff)
From: Stefan-gabriel Mirea <stefan-gabriel.mirea@nxp.com>
To: "corbet@lwn.net" <corbet@lwn.net>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
	"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
	"will@kernel.org" <will@kernel.org>,
	"shawnguo@kernel.org" <shawnguo@kernel.org>,
	Leo Li <leoyang.li@nxp.com>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>,
	Larisa Ileana Grigore <larisa.grigore@nxp.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-serial@vger.kernel.org" <linux-serial@vger.kernel.org>,
	"jslaby@suse.com" <jslaby@suse.com>,
	Cosmin Stefan Stoica <cosmin.stoica@nxp.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH 4/6] dt-bindings: serial: Document Freescale LINFlex UART
Date: Fri, 2 Aug 2019 19:47:21 +0000	[thread overview]
Message-ID: <20190802194702.30249-5-stefan-gabriel.mirea@nxp.com> (raw)
In-Reply-To: <20190802194702.30249-1-stefan-gabriel.mirea@nxp.com>

From: Stoica Cosmin-Stefan <cosmin.stoica@nxp.com>

Add documentation for the serial communication interface module (LINFlex),
found in two instances on S32V234.

Signed-off-by: Stoica Cosmin-Stefan <cosmin.stoica@nxp.com>
Signed-off-by: Larisa Grigore <Larisa.Grigore@nxp.com>
Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
---
 .../bindings/serial/fsl,s32-linflexuart.txt   | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt

diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt
new file mode 100644
index 000000000000..957ffeaca9f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt
@@ -0,0 +1,24 @@
+* Freescale Linflex UART
+
+The LINFlexD controller implements several LIN protocol versions, as well as
+support for full-duplex UART communication through 8-bit and 9-bit frames. The
+Linflex UART driver enables operation only in UART mode.
+
+See chapter 47 ("LINFlexD") in the reference manual[1].
+
+Required properties:
+- compatible :
+  - "fsl,s32-linflexuart" for linflex configured in uart mode which
+  is compatible with the one integrated on S32V234 SoC
+- reg : Address and length of the register set for the device
+- interrupts : Should contain uart interrupt
+
+Example:
+uart0:serial@40053000 {
+	compatible = "fsl,s32-linflexuart";
+	reg = <0x0 0x40053000 0x0 0x1000>;
+	interrupts = <0 59 4>;
+	status = "disabled";
+};
+
+[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM
-- 
2.22.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-08-02 19:47 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-02 19:47 [PATCH 0/6] Add initial support for S32V234-EVB Stefan-gabriel Mirea
2019-08-02 19:47 ` Stefan-gabriel Mirea
2019-08-02 19:47 ` Stefan-gabriel Mirea
2019-08-02 19:47 ` [PATCH 1/6] dt-bindings: arm: fsl: Add the S32V234-EVB board Stefan-gabriel Mirea
2019-08-02 19:47   ` Stefan-gabriel Mirea
2019-08-02 19:47   ` Stefan-gabriel Mirea
2019-08-02 22:38   ` Rob Herring
2019-08-02 22:38     ` Rob Herring
2019-08-02 22:38     ` Rob Herring
2019-08-03  8:00     ` [EXT] " Stefan-gabriel Mirea
2019-08-03  8:00       ` Stefan-gabriel Mirea
2019-08-03  8:00       ` Stefan-gabriel Mirea
2019-08-02 19:47 ` [PATCH 2/6] arm64: Introduce config for S32 Stefan-gabriel Mirea
2019-08-02 19:47   ` Stefan-gabriel Mirea
2019-08-02 19:47   ` Stefan-gabriel Mirea
2019-08-02 19:47 ` [PATCH 3/6] arm64: dts: fsl: Add device tree for S32V234-EVB Stefan-gabriel Mirea
2019-08-02 19:47   ` Stefan-gabriel Mirea
2019-08-02 19:47   ` Stefan-gabriel Mirea
2019-08-02 19:47 ` Stefan-gabriel Mirea [this message]
2019-08-02 19:47   ` [PATCH 4/6] dt-bindings: serial: Document Freescale LINFlex UART Stefan-gabriel Mirea
2019-08-02 19:47   ` Stefan-gabriel Mirea
2019-08-02 19:47 ` [PATCH 5/6] tty: serial: Add linflexuart driver for S32V234 Stefan-gabriel Mirea
2019-08-02 19:47   ` Stefan-gabriel Mirea
2019-08-02 19:47   ` Stefan-gabriel Mirea
2019-08-05 15:31   ` gregkh
2019-08-05 15:31     ` gregkh
2019-08-05 15:31     ` gregkh
2019-08-06 17:11     ` Stefan-gabriel Mirea
2019-08-06 17:11       ` Stefan-gabriel Mirea
2019-08-06 17:11       ` Stefan-gabriel Mirea
2019-08-06 18:40       ` gregkh
2019-08-06 18:40         ` gregkh
2019-08-06 18:40         ` gregkh
2019-08-07 16:42         ` Stefan-gabriel Mirea
2019-08-07 16:42           ` Stefan-gabriel Mirea
2019-08-07 16:42           ` Stefan-gabriel Mirea
2019-08-07 16:56           ` gregkh
2019-08-07 16:56             ` gregkh
2019-08-07 16:56             ` gregkh
2019-08-07 17:05             ` Stefan-gabriel Mirea
2019-08-07 17:05               ` Stefan-gabriel Mirea
2019-08-07 17:05               ` Stefan-gabriel Mirea
2019-08-08  8:08   ` Will Deacon
2019-08-08  8:08     ` Will Deacon
2019-08-08  8:08     ` Will Deacon
2019-08-08 12:47     ` Stefan-gabriel Mirea
2019-08-08 12:47       ` Stefan-gabriel Mirea
2019-08-08 12:47       ` Stefan-gabriel Mirea
2019-08-08 17:17       ` Will Deacon
2019-08-08 17:17         ` Will Deacon
2019-08-08 17:17         ` Will Deacon
2019-08-09  9:45         ` Stefan-gabriel Mirea
2019-08-09  9:45           ` Stefan-gabriel Mirea
2019-08-09  9:45           ` Stefan-gabriel Mirea
2019-08-09  9:53           ` Will Deacon
2019-08-09  9:53             ` Will Deacon
2019-08-09  9:53             ` Will Deacon
2019-08-09  9:57             ` Stefan-gabriel Mirea
2019-08-09  9:57               ` Stefan-gabriel Mirea
2019-08-09  9:57               ` Stefan-gabriel Mirea
2019-08-02 19:47 ` [PATCH 6/6] arm64: defconfig: Enable configs " Stefan-gabriel Mirea
2019-08-02 19:47   ` Stefan-gabriel Mirea
2019-08-02 19:47   ` Stefan-gabriel Mirea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190802194702.30249-5-stefan-gabriel.mirea@nxp.com \
    --to=stefan-gabriel.mirea@nxp.com \
    --cc=catalin.marinas@arm.com \
    --cc=corbet@lwn.net \
    --cc=cosmin.stoica@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.com \
    --cc=larisa.grigore@nxp.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.