All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Andrzej Hajda <a.hajda@samsung.com>,
	Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org
Subject: [PATCH 7/8] drm/bridge: dw-hdmi-i2s: enable only the required i2s lanes
Date: Mon,  5 Aug 2019 15:41:01 +0200	[thread overview]
Message-ID: <20190805134102.24173-8-jbrunet@baylibre.com> (raw)
In-Reply-To: <20190805134102.24173-1-jbrunet@baylibre.com>

Enable the i2s lanes depending on the number of channel in the stream

Cc: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 .../gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c   | 15 ++++++++++++++-
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.h         |  6 +++++-
 2 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index 41bee0099578..b8ece9c1ba2c 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -54,7 +54,20 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
 	hdmi_write(audio, (u8)~HDMI_MC_SWRSTZ_I2SSWRST_REQ, HDMI_MC_SWRSTZ);
 
 	inputclkfs	= HDMI_AUD_INPUTCLKFS_64FS;
-	conf0		= HDMI_AUD_CONF0_I2S_ALL_ENABLE;
+	conf0		= (HDMI_AUD_CONF0_I2S_SELECT | HDMI_AUD_CONF0_I2S_EN0);
+
+	/* Enable the required i2s lanes */
+	switch (hparms->channels) {
+	case 7 ... 8:
+		conf0 |= HDMI_AUD_CONF0_I2S_EN3;
+		/* Fall-thru */
+	case 5 ... 6:
+		conf0 |= HDMI_AUD_CONF0_I2S_EN2;
+		/* Fall-thru */
+	case 3 ... 4:
+		conf0 |= HDMI_AUD_CONF0_I2S_EN1;
+		/* Fall-thru */
+	}
 
 	switch (hparms->sample_width) {
 	case 16:
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
index a272fa393ae6..6988f12d89d9 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
@@ -865,7 +865,11 @@ enum {
 
 /* AUD_CONF0 field values */
 	HDMI_AUD_CONF0_SW_RESET = 0x80,
-	HDMI_AUD_CONF0_I2S_ALL_ENABLE = 0x2F,
+	HDMI_AUD_CONF0_I2S_SELECT = 0x20,
+	HDMI_AUD_CONF0_I2S_EN3 = 0x08,
+	HDMI_AUD_CONF0_I2S_EN2 = 0x04,
+	HDMI_AUD_CONF0_I2S_EN1 = 0x02,
+	HDMI_AUD_CONF0_I2S_EN0 = 0x01,
 
 /* AUD_CONF1 field values */
 	HDMI_AUD_CONF1_MODE_I2S = 0x00,
-- 
2.21.0


WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com>
To: Andrzej Hajda <a.hajda@samsung.com>,
	Neil Armstrong <narmstrong@baylibre.com>
Cc: Jonas Karlman <jonas@kwiboo.se>,
	Kevin Hilman <khilman@baylibre.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-amlogic@lists.infradead.org,
	Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 7/8] drm/bridge: dw-hdmi-i2s: enable only the required i2s lanes
Date: Mon,  5 Aug 2019 15:41:01 +0200	[thread overview]
Message-ID: <20190805134102.24173-8-jbrunet@baylibre.com> (raw)
In-Reply-To: <20190805134102.24173-1-jbrunet@baylibre.com>

Enable the i2s lanes depending on the number of channel in the stream

Cc: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 .../gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c   | 15 ++++++++++++++-
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.h         |  6 +++++-
 2 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index 41bee0099578..b8ece9c1ba2c 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -54,7 +54,20 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
 	hdmi_write(audio, (u8)~HDMI_MC_SWRSTZ_I2SSWRST_REQ, HDMI_MC_SWRSTZ);
 
 	inputclkfs	= HDMI_AUD_INPUTCLKFS_64FS;
-	conf0		= HDMI_AUD_CONF0_I2S_ALL_ENABLE;
+	conf0		= (HDMI_AUD_CONF0_I2S_SELECT | HDMI_AUD_CONF0_I2S_EN0);
+
+	/* Enable the required i2s lanes */
+	switch (hparms->channels) {
+	case 7 ... 8:
+		conf0 |= HDMI_AUD_CONF0_I2S_EN3;
+		/* Fall-thru */
+	case 5 ... 6:
+		conf0 |= HDMI_AUD_CONF0_I2S_EN2;
+		/* Fall-thru */
+	case 3 ... 4:
+		conf0 |= HDMI_AUD_CONF0_I2S_EN1;
+		/* Fall-thru */
+	}
 
 	switch (hparms->sample_width) {
 	case 16:
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
index a272fa393ae6..6988f12d89d9 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.h
@@ -865,7 +865,11 @@ enum {
 
 /* AUD_CONF0 field values */
 	HDMI_AUD_CONF0_SW_RESET = 0x80,
-	HDMI_AUD_CONF0_I2S_ALL_ENABLE = 0x2F,
+	HDMI_AUD_CONF0_I2S_SELECT = 0x20,
+	HDMI_AUD_CONF0_I2S_EN3 = 0x08,
+	HDMI_AUD_CONF0_I2S_EN2 = 0x04,
+	HDMI_AUD_CONF0_I2S_EN1 = 0x02,
+	HDMI_AUD_CONF0_I2S_EN0 = 0x01,
 
 /* AUD_CONF1 field values */
 	HDMI_AUD_CONF1_MODE_I2S = 0x00,
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2019-08-05 13:41 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-05 13:40 [PATCH 0/8] drm/bridge: dw-hdmi: improve i2s support Jerome Brunet
2019-08-05 13:40 ` Jerome Brunet
2019-08-05 13:40 ` [PATCH 1/8] drm/bridge: dw-hdmi-i2s: support more i2s format Jerome Brunet
2019-08-05 13:40   ` Jerome Brunet
2019-08-05 13:40 ` [PATCH 2/8] drm/bridge: dw-hdmi: move audio channel setup out of ahb Jerome Brunet
2019-08-05 13:40   ` Jerome Brunet
2019-08-05 13:40 ` [PATCH 3/8] drm/bridge: dw-hdmi: set channel count in the infoframes Jerome Brunet
2019-08-05 13:40   ` Jerome Brunet
2019-08-05 13:40 ` [PATCH 4/8] drm/bridge: dw-hdmi-i2s: enable lpcm multi channels Jerome Brunet
2019-08-05 13:40   ` Jerome Brunet
2019-08-05 13:40 ` [PATCH 5/8] drm/bridge: dw-hdmi-i2s: set the channel allocation Jerome Brunet
2019-08-05 13:40   ` Jerome Brunet
2019-08-05 13:41 ` [PATCH 6/8] drm/bridge: dw-hdmi-i2s: reset audio fifo before applying new params Jerome Brunet
2019-08-05 13:41   ` Jerome Brunet
2019-08-05 13:41 ` Jerome Brunet [this message]
2019-08-05 13:41   ` [PATCH 7/8] drm/bridge: dw-hdmi-i2s: enable only the required i2s lanes Jerome Brunet
2019-08-05 13:41 ` [PATCH 8/8] drm/bridge: dw-hdmi-i2s: add .get_eld support Jerome Brunet
2019-08-05 13:41   ` Jerome Brunet
2019-08-07 14:57   ` Jonas Karlman
2019-08-07 14:57     ` Jonas Karlman
2019-08-07 14:57     ` Jonas Karlman
2019-08-07 16:10     ` Jerome Brunet
2019-08-07 16:10       ` Jerome Brunet
2019-08-07 16:10       ` Jerome Brunet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190805134102.24173-8-jbrunet@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=a.hajda@samsung.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jonas@kwiboo.se \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.