From: Mark Brown <broonie@kernel.org>
To: Raag Jadav <raagjadav@gmail.com>
Cc: devicetree@vger.kernel.org, Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>
Subject: Applied "regulator: act8865: operating mode and suspend state support" to the regulator tree
Date: Thu, 15 Aug 2019 18:14:33 +0100 (BST) [thread overview]
Message-ID: <20190815171433.E2AC82742B9E@ypsilon.sirena.org.uk> (raw)
In-Reply-To: <1565721176-8955-2-git-send-email-raagjadav@gmail.com>
The patch
regulator: act8865: operating mode and suspend state support
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.4
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From 955741a5120bb1ed19d3b12da90bb947d3a0cb99 Mon Sep 17 00:00:00 2001
From: Raag Jadav <raagjadav@gmail.com>
Date: Wed, 14 Aug 2019 00:02:55 +0530
Subject: [PATCH] regulator: act8865: operating mode and suspend state support
Implement ->set_mode(), ->get_mode() and ->set_suspend_xx() hooks
for act8865 with unlocked expert registers.
Based on work done by Borris Brezillon on [1].
[1] https://www.spinics.net/lists/kernel/msg2942960.html
Signed-off-by: Raag Jadav <raagjadav@gmail.com>
Link: https://lore.kernel.org/r/1565721176-8955-2-git-send-email-raagjadav@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/act8865-regulator.c | 187 +++++++++++++++++++++++++-
1 file changed, 186 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index 6a90d3c7a452..0fa97f934df4 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -19,6 +19,7 @@
#include <linux/power_supply.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regmap.h>
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
/*
* ACT8600 Global Register Map.
@@ -90,23 +91,31 @@
*/
#define ACT8865_SYS_MODE 0x00
#define ACT8865_SYS_CTRL 0x01
+#define ACT8865_SYS_UNLK_REGS 0x0b
#define ACT8865_DCDC1_VSET1 0x20
#define ACT8865_DCDC1_VSET2 0x21
#define ACT8865_DCDC1_CTRL 0x22
+#define ACT8865_DCDC1_SUS 0x24
#define ACT8865_DCDC2_VSET1 0x30
#define ACT8865_DCDC2_VSET2 0x31
#define ACT8865_DCDC2_CTRL 0x32
+#define ACT8865_DCDC2_SUS 0x34
#define ACT8865_DCDC3_VSET1 0x40
#define ACT8865_DCDC3_VSET2 0x41
#define ACT8865_DCDC3_CTRL 0x42
+#define ACT8865_DCDC3_SUS 0x44
#define ACT8865_LDO1_VSET 0x50
#define ACT8865_LDO1_CTRL 0x51
+#define ACT8865_LDO1_SUS 0x52
#define ACT8865_LDO2_VSET 0x54
#define ACT8865_LDO2_CTRL 0x55
+#define ACT8865_LDO2_SUS 0x56
#define ACT8865_LDO3_VSET 0x60
#define ACT8865_LDO3_CTRL 0x61
+#define ACT8865_LDO3_SUS 0x62
#define ACT8865_LDO4_VSET 0x64
#define ACT8865_LDO4_CTRL 0x65
+#define ACT8865_LDO4_SUS 0x66
#define ACT8865_MSTROFF 0x20
/*
@@ -225,6 +234,171 @@ static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0),
};
+static int act8865_set_suspend_state(struct regulator_dev *rdev, bool enable)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev->desc->id, reg, val;
+
+ switch (id) {
+ case ACT8865_ID_DCDC1:
+ reg = ACT8865_DCDC1_SUS;
+ val = 0xa8;
+ break;
+ case ACT8865_ID_DCDC2:
+ reg = ACT8865_DCDC2_SUS;
+ val = 0xa8;
+ break;
+ case ACT8865_ID_DCDC3:
+ reg = ACT8865_DCDC3_SUS;
+ val = 0xa8;
+ break;
+ case ACT8865_ID_LDO1:
+ reg = ACT8865_LDO1_SUS;
+ val = 0xe8;
+ break;
+ case ACT8865_ID_LDO2:
+ reg = ACT8865_LDO2_SUS;
+ val = 0xe8;
+ break;
+ case ACT8865_ID_LDO3:
+ reg = ACT8865_LDO3_SUS;
+ val = 0xe8;
+ break;
+ case ACT8865_ID_LDO4:
+ reg = ACT8865_LDO4_SUS;
+ val = 0xe8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (enable)
+ val |= BIT(4);
+
+ /*
+ * Ask the PMIC to enable/disable this output when entering hibernate
+ * mode.
+ */
+ return regmap_write(regmap, reg, val);
+}
+
+static int act8865_set_suspend_enable(struct regulator_dev *rdev)
+{
+ return act8865_set_suspend_state(rdev, true);
+}
+
+static int act8865_set_suspend_disable(struct regulator_dev *rdev)
+{
+ return act8865_set_suspend_state(rdev, false);
+}
+
+static unsigned int act8865_of_map_mode(unsigned int mode)
+{
+ switch (mode) {
+ case ACT8865_REGULATOR_MODE_FIXED:
+ return REGULATOR_MODE_FAST;
+ case ACT8865_REGULATOR_MODE_NORMAL:
+ return REGULATOR_MODE_NORMAL;
+ case ACT8865_REGULATOR_MODE_LOWPOWER:
+ return REGULATOR_MODE_STANDBY;
+ default:
+ return REGULATOR_MODE_INVALID;
+ }
+}
+
+static int act8865_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev_get_id(rdev);
+ int reg, val = 0;
+
+ switch (id) {
+ case ACT8865_ID_DCDC1:
+ reg = ACT8865_DCDC1_CTRL;
+ break;
+ case ACT8865_ID_DCDC2:
+ reg = ACT8865_DCDC2_CTRL;
+ break;
+ case ACT8865_ID_DCDC3:
+ reg = ACT8865_DCDC3_CTRL;
+ break;
+ case ACT8865_ID_LDO1:
+ reg = ACT8865_LDO1_CTRL;
+ break;
+ case ACT8865_ID_LDO2:
+ reg = ACT8865_LDO2_CTRL;
+ break;
+ case ACT8865_ID_LDO3:
+ reg = ACT8865_LDO3_CTRL;
+ break;
+ case ACT8865_ID_LDO4:
+ reg = ACT8865_LDO4_CTRL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ case REGULATOR_MODE_NORMAL:
+ if (id <= ACT8865_ID_DCDC3)
+ val = BIT(5);
+ break;
+ case REGULATOR_MODE_STANDBY:
+ if (id > ACT8865_ID_DCDC3)
+ val = BIT(5);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(regmap, reg, BIT(5), val);
+}
+
+static unsigned int act8865_get_mode(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev_get_id(rdev);
+ int reg, ret, val = 0;
+
+ switch (id) {
+ case ACT8865_ID_DCDC1:
+ reg = ACT8865_DCDC1_CTRL;
+ break;
+ case ACT8865_ID_DCDC2:
+ reg = ACT8865_DCDC2_CTRL;
+ break;
+ case ACT8865_ID_DCDC3:
+ reg = ACT8865_DCDC3_CTRL;
+ break;
+ case ACT8865_ID_LDO1:
+ reg = ACT8865_LDO1_CTRL;
+ break;
+ case ACT8865_ID_LDO2:
+ reg = ACT8865_LDO2_CTRL;
+ break;
+ case ACT8865_ID_LDO3:
+ reg = ACT8865_LDO3_CTRL;
+ break;
+ case ACT8865_ID_LDO4:
+ reg = ACT8865_LDO4_CTRL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_read(regmap, reg, &val);
+ if (ret)
+ return ret;
+
+ if (id <= ACT8865_ID_DCDC3 && (val & BIT(5)))
+ return REGULATOR_MODE_FAST;
+ else if (id > ACT8865_ID_DCDC3 && !(val & BIT(5)))
+ return REGULATOR_MODE_NORMAL;
+ else
+ return REGULATOR_MODE_STANDBY;
+}
+
static const struct regulator_ops act8865_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
@@ -232,7 +406,11 @@ static const struct regulator_ops act8865_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
+ .set_mode = act8865_set_mode,
+ .get_mode = act8865_get_mode,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = act8865_set_suspend_enable,
+ .set_suspend_disable = act8865_set_suspend_disable,
};
static const struct regulator_ops act8865_ldo_ops = {
@@ -242,7 +420,11 @@ static const struct regulator_ops act8865_ldo_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
+ .set_mode = act8865_set_mode,
+ .get_mode = act8865_get_mode,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = act8865_set_suspend_enable,
+ .set_suspend_disable = act8865_set_suspend_disable,
.set_pull_down = regulator_set_pull_down_regmap,
};
@@ -256,6 +438,7 @@ static const struct regulator_ops act8865_fixed_ldo_ops = {
[_family##_ID_##_id] = { \
.name = _name, \
.of_match = of_match_ptr(_name), \
+ .of_map_mode = act8865_of_map_mode, \
.regulators_node = of_match_ptr("regulators"), \
.supply_name = _supply, \
.id = _family##_ID_##_id, \
@@ -590,7 +773,9 @@ static int act8865_pmic_probe(struct i2c_client *client,
i2c_set_clientdata(client, act8865);
- return 0;
+ /* Unlock expert registers for ACT8865. */
+ return type != ACT8865 ? 0 : regmap_write(act8865->regmap,
+ ACT8865_SYS_UNLK_REGS, 0xef);
}
static const struct i2c_device_id act8865_ids[] = {
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Mark Brown <broonie@kernel.org>
To: Raag Jadav <raagjadav@gmail.com>
Cc: devicetree@vger.kernel.org, Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org, Mark Brown <broonie@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>
Subject: Applied "regulator: act8865: operating mode and suspend state support" to the regulator tree
Date: Thu, 15 Aug 2019 18:14:33 +0100 (BST) [thread overview]
Message-ID: <20190815171433.E2AC82742B9E@ypsilon.sirena.org.uk> (raw)
In-Reply-To: <1565721176-8955-2-git-send-email-raagjadav@gmail.com>
The patch
regulator: act8865: operating mode and suspend state support
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.4
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 955741a5120bb1ed19d3b12da90bb947d3a0cb99 Mon Sep 17 00:00:00 2001
From: Raag Jadav <raagjadav@gmail.com>
Date: Wed, 14 Aug 2019 00:02:55 +0530
Subject: [PATCH] regulator: act8865: operating mode and suspend state support
Implement ->set_mode(), ->get_mode() and ->set_suspend_xx() hooks
for act8865 with unlocked expert registers.
Based on work done by Borris Brezillon on [1].
[1] https://www.spinics.net/lists/kernel/msg2942960.html
Signed-off-by: Raag Jadav <raagjadav@gmail.com>
Link: https://lore.kernel.org/r/1565721176-8955-2-git-send-email-raagjadav@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
drivers/regulator/act8865-regulator.c | 187 +++++++++++++++++++++++++-
1 file changed, 186 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index 6a90d3c7a452..0fa97f934df4 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -19,6 +19,7 @@
#include <linux/power_supply.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regmap.h>
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
/*
* ACT8600 Global Register Map.
@@ -90,23 +91,31 @@
*/
#define ACT8865_SYS_MODE 0x00
#define ACT8865_SYS_CTRL 0x01
+#define ACT8865_SYS_UNLK_REGS 0x0b
#define ACT8865_DCDC1_VSET1 0x20
#define ACT8865_DCDC1_VSET2 0x21
#define ACT8865_DCDC1_CTRL 0x22
+#define ACT8865_DCDC1_SUS 0x24
#define ACT8865_DCDC2_VSET1 0x30
#define ACT8865_DCDC2_VSET2 0x31
#define ACT8865_DCDC2_CTRL 0x32
+#define ACT8865_DCDC2_SUS 0x34
#define ACT8865_DCDC3_VSET1 0x40
#define ACT8865_DCDC3_VSET2 0x41
#define ACT8865_DCDC3_CTRL 0x42
+#define ACT8865_DCDC3_SUS 0x44
#define ACT8865_LDO1_VSET 0x50
#define ACT8865_LDO1_CTRL 0x51
+#define ACT8865_LDO1_SUS 0x52
#define ACT8865_LDO2_VSET 0x54
#define ACT8865_LDO2_CTRL 0x55
+#define ACT8865_LDO2_SUS 0x56
#define ACT8865_LDO3_VSET 0x60
#define ACT8865_LDO3_CTRL 0x61
+#define ACT8865_LDO3_SUS 0x62
#define ACT8865_LDO4_VSET 0x64
#define ACT8865_LDO4_CTRL 0x65
+#define ACT8865_LDO4_SUS 0x66
#define ACT8865_MSTROFF 0x20
/*
@@ -225,6 +234,171 @@ static const struct regulator_linear_range act8600_sudcdc_voltage_ranges[] = {
REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0),
};
+static int act8865_set_suspend_state(struct regulator_dev *rdev, bool enable)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev->desc->id, reg, val;
+
+ switch (id) {
+ case ACT8865_ID_DCDC1:
+ reg = ACT8865_DCDC1_SUS;
+ val = 0xa8;
+ break;
+ case ACT8865_ID_DCDC2:
+ reg = ACT8865_DCDC2_SUS;
+ val = 0xa8;
+ break;
+ case ACT8865_ID_DCDC3:
+ reg = ACT8865_DCDC3_SUS;
+ val = 0xa8;
+ break;
+ case ACT8865_ID_LDO1:
+ reg = ACT8865_LDO1_SUS;
+ val = 0xe8;
+ break;
+ case ACT8865_ID_LDO2:
+ reg = ACT8865_LDO2_SUS;
+ val = 0xe8;
+ break;
+ case ACT8865_ID_LDO3:
+ reg = ACT8865_LDO3_SUS;
+ val = 0xe8;
+ break;
+ case ACT8865_ID_LDO4:
+ reg = ACT8865_LDO4_SUS;
+ val = 0xe8;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (enable)
+ val |= BIT(4);
+
+ /*
+ * Ask the PMIC to enable/disable this output when entering hibernate
+ * mode.
+ */
+ return regmap_write(regmap, reg, val);
+}
+
+static int act8865_set_suspend_enable(struct regulator_dev *rdev)
+{
+ return act8865_set_suspend_state(rdev, true);
+}
+
+static int act8865_set_suspend_disable(struct regulator_dev *rdev)
+{
+ return act8865_set_suspend_state(rdev, false);
+}
+
+static unsigned int act8865_of_map_mode(unsigned int mode)
+{
+ switch (mode) {
+ case ACT8865_REGULATOR_MODE_FIXED:
+ return REGULATOR_MODE_FAST;
+ case ACT8865_REGULATOR_MODE_NORMAL:
+ return REGULATOR_MODE_NORMAL;
+ case ACT8865_REGULATOR_MODE_LOWPOWER:
+ return REGULATOR_MODE_STANDBY;
+ default:
+ return REGULATOR_MODE_INVALID;
+ }
+}
+
+static int act8865_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev_get_id(rdev);
+ int reg, val = 0;
+
+ switch (id) {
+ case ACT8865_ID_DCDC1:
+ reg = ACT8865_DCDC1_CTRL;
+ break;
+ case ACT8865_ID_DCDC2:
+ reg = ACT8865_DCDC2_CTRL;
+ break;
+ case ACT8865_ID_DCDC3:
+ reg = ACT8865_DCDC3_CTRL;
+ break;
+ case ACT8865_ID_LDO1:
+ reg = ACT8865_LDO1_CTRL;
+ break;
+ case ACT8865_ID_LDO2:
+ reg = ACT8865_LDO2_CTRL;
+ break;
+ case ACT8865_ID_LDO3:
+ reg = ACT8865_LDO3_CTRL;
+ break;
+ case ACT8865_ID_LDO4:
+ reg = ACT8865_LDO4_CTRL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ case REGULATOR_MODE_NORMAL:
+ if (id <= ACT8865_ID_DCDC3)
+ val = BIT(5);
+ break;
+ case REGULATOR_MODE_STANDBY:
+ if (id > ACT8865_ID_DCDC3)
+ val = BIT(5);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(regmap, reg, BIT(5), val);
+}
+
+static unsigned int act8865_get_mode(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev->regmap;
+ int id = rdev_get_id(rdev);
+ int reg, ret, val = 0;
+
+ switch (id) {
+ case ACT8865_ID_DCDC1:
+ reg = ACT8865_DCDC1_CTRL;
+ break;
+ case ACT8865_ID_DCDC2:
+ reg = ACT8865_DCDC2_CTRL;
+ break;
+ case ACT8865_ID_DCDC3:
+ reg = ACT8865_DCDC3_CTRL;
+ break;
+ case ACT8865_ID_LDO1:
+ reg = ACT8865_LDO1_CTRL;
+ break;
+ case ACT8865_ID_LDO2:
+ reg = ACT8865_LDO2_CTRL;
+ break;
+ case ACT8865_ID_LDO3:
+ reg = ACT8865_LDO3_CTRL;
+ break;
+ case ACT8865_ID_LDO4:
+ reg = ACT8865_LDO4_CTRL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_read(regmap, reg, &val);
+ if (ret)
+ return ret;
+
+ if (id <= ACT8865_ID_DCDC3 && (val & BIT(5)))
+ return REGULATOR_MODE_FAST;
+ else if (id > ACT8865_ID_DCDC3 && !(val & BIT(5)))
+ return REGULATOR_MODE_NORMAL;
+ else
+ return REGULATOR_MODE_STANDBY;
+}
+
static const struct regulator_ops act8865_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
@@ -232,7 +406,11 @@ static const struct regulator_ops act8865_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
+ .set_mode = act8865_set_mode,
+ .get_mode = act8865_get_mode,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = act8865_set_suspend_enable,
+ .set_suspend_disable = act8865_set_suspend_disable,
};
static const struct regulator_ops act8865_ldo_ops = {
@@ -242,7 +420,11 @@ static const struct regulator_ops act8865_ldo_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
+ .set_mode = act8865_set_mode,
+ .get_mode = act8865_get_mode,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = act8865_set_suspend_enable,
+ .set_suspend_disable = act8865_set_suspend_disable,
.set_pull_down = regulator_set_pull_down_regmap,
};
@@ -256,6 +438,7 @@ static const struct regulator_ops act8865_fixed_ldo_ops = {
[_family##_ID_##_id] = { \
.name = _name, \
.of_match = of_match_ptr(_name), \
+ .of_map_mode = act8865_of_map_mode, \
.regulators_node = of_match_ptr("regulators"), \
.supply_name = _supply, \
.id = _family##_ID_##_id, \
@@ -590,7 +773,9 @@ static int act8865_pmic_probe(struct i2c_client *client,
i2c_set_clientdata(client, act8865);
- return 0;
+ /* Unlock expert registers for ACT8865. */
+ return type != ACT8865 ? 0 : regmap_write(act8865->regmap,
+ ACT8865_SYS_UNLK_REGS, 0xef);
}
static const struct i2c_device_id act8865_ids[] = {
--
2.20.1
next prev parent reply other threads:[~2019-08-15 17:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-13 18:32 [PATCH v2 0/2] act8865 regulator modes and suspend states Raag Jadav
2019-08-13 18:32 ` [PATCH v2 1/2] regulator: act8865: operating mode and suspend state support Raag Jadav
2019-08-15 16:52 ` Mark Brown
2019-08-15 17:14 ` Mark Brown [this message]
2019-08-15 17:14 ` Applied "regulator: act8865: operating mode and suspend state support" to the regulator tree Mark Brown
2019-08-13 18:32 ` [PATCH v2 2/2] dt-bindings: regulator: act8865 regulator modes and suspend states Raag Jadav
2019-08-15 17:14 ` Applied "regulator: act8865 regulator modes and suspend states" to the regulator tree Mark Brown
2019-08-15 17:14 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190815171433.E2AC82742B9E@ypsilon.sirena.org.uk \
--to=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=raagjadav@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.