From: Tero Kristo <t-kristo@ti.com>
To: linux-omap@vger.kernel.org, tony@atomide.com
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/10] ARM: dts: omap5: convert IOMMUs to use ti-sysc
Date: Wed, 28 Aug 2019 10:56:44 +0300 [thread overview]
Message-ID: <20190828075644.4493-11-t-kristo@ti.com> (raw)
In-Reply-To: <20190828075644.4493-1-t-kristo@ti.com>
Convert omap5 IOMMUs to use ti-sysc instead of legacy omap-hwmod based
implementation. Enable the IOMMUs also while doing this.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/boot/dts/omap5-l4.dtsi | 11 ++++++---
arch/arm/boot/dts/omap5.dtsi | 40 +++++++++++++++++++++------------
2 files changed, 34 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index 0960348002ad..80c2d2fcc03b 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -349,7 +349,6 @@
target-module@66000 { /* 0x4a066000, ap 23 0a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "mmu_dsp";
reg = <0x66000 0x4>,
<0x66010 0x4>,
<0x66014 0x4>;
@@ -364,12 +363,18 @@
/* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */
clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
clock-names = "fck";
+ resets = <&prm_dsp 1>;
+ reset-names = "rstctrl";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x66000 0x1000>;
- /* mmu_dsp cannot be moved before reset driver */
- status = "disabled";
+ mmu_dsp: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ };
};
target-module@70000 { /* 0x4a070000, ap 79 2e.0 */
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index c8bde171a949..05929d59b0af 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -186,21 +186,33 @@
#gpio-cells = <2>;
};
- mmu_dsp: mmu@4a066000 {
- compatible = "ti,omap4-iommu";
- reg = <0x4a066000 0x100>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_dsp";
- #iommu-cells = <0>;
- };
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x55082000 0x100>;
+ #size-cells = <1>;
+ #address-cells = <1>;
- mmu_ipu: mmu@55082000 {
- compatible = "ti,omap4-iommu";
- reg = <0x55082000 0x100>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
+ mmu_ipu: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
};
dmm@4e000000 {
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
WARNING: multiple messages have this Message-ID (diff)
From: Tero Kristo <t-kristo@ti.com>
To: <linux-omap@vger.kernel.org>, <tony@atomide.com>
Cc: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/10] ARM: dts: omap5: convert IOMMUs to use ti-sysc
Date: Wed, 28 Aug 2019 10:56:44 +0300 [thread overview]
Message-ID: <20190828075644.4493-11-t-kristo@ti.com> (raw)
In-Reply-To: <20190828075644.4493-1-t-kristo@ti.com>
Convert omap5 IOMMUs to use ti-sysc instead of legacy omap-hwmod based
implementation. Enable the IOMMUs also while doing this.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
arch/arm/boot/dts/omap5-l4.dtsi | 11 ++++++---
arch/arm/boot/dts/omap5.dtsi | 40 +++++++++++++++++++++------------
2 files changed, 34 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index 0960348002ad..80c2d2fcc03b 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -349,7 +349,6 @@
target-module@66000 { /* 0x4a066000, ap 23 0a.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "mmu_dsp";
reg = <0x66000 0x4>,
<0x66010 0x4>,
<0x66014 0x4>;
@@ -364,12 +363,18 @@
/* Domains (V, P, C): mm, dsp_pwrdm, dsp_clkdm */
clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
clock-names = "fck";
+ resets = <&prm_dsp 1>;
+ reset-names = "rstctrl";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x66000 0x1000>;
- /* mmu_dsp cannot be moved before reset driver */
- status = "disabled";
+ mmu_dsp: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ };
};
target-module@70000 { /* 0x4a070000, ap 79 2e.0 */
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index c8bde171a949..05929d59b0af 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -186,21 +186,33 @@
#gpio-cells = <2>;
};
- mmu_dsp: mmu@4a066000 {
- compatible = "ti,omap4-iommu";
- reg = <0x4a066000 0x100>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_dsp";
- #iommu-cells = <0>;
- };
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x55082000 0x100>;
+ #size-cells = <1>;
+ #address-cells = <1>;
- mmu_ipu: mmu@55082000 {
- compatible = "ti,omap4-iommu";
- reg = <0x55082000 0x100>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- ti,hwmods = "mmu_ipu";
- #iommu-cells = <0>;
- ti,iommu-bus-err-back;
+ mmu_ipu: mmu@0 {
+ compatible = "ti,omap4-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
};
dmm@4e000000 {
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-28 7:56 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-28 7:56 [PATCH 00/10] ARM: dts: omap changes for IOMMU / reset support Tero Kristo
2019-08-28 7:56 ` Tero Kristo
2019-08-28 7:56 ` [PATCH 01/10] ARM: dts: omap5: add IVA clkctrl nodes Tero Kristo
2019-08-28 7:56 ` Tero Kristo
2019-08-28 7:56 ` [PATCH 02/10] ARM: dts: dra7: add PRM nodes Tero Kristo
2019-08-28 7:56 ` Tero Kristo
2019-08-28 7:56 ` [PATCH 03/10] ARM: dts: omap4: " Tero Kristo
2019-08-28 7:56 ` Tero Kristo
2019-08-28 7:56 ` [PATCH 04/10] ARM: dts: am33xx: Add PRM data Tero Kristo
2019-08-28 7:56 ` Tero Kristo
2019-08-28 7:56 ` [PATCH 05/10] ARM: dts: am43xx: " Tero Kristo
2019-08-28 7:56 ` Tero Kristo
2019-08-28 7:56 ` [PATCH 06/10] ARM: dts: omap5: " Tero Kristo
2019-08-28 7:56 ` Tero Kristo
2019-08-28 7:56 ` [PATCH 07/10] ARM: dts: dra7: convert IOMMUs to use ti-sysc Tero Kristo
2019-08-28 7:56 ` Tero Kristo
2019-08-28 7:56 ` [PATCH 08/10] ARM: dts: dra74x: " Tero Kristo
2019-08-28 7:56 ` Tero Kristo
2019-08-28 7:56 ` [PATCH 09/10] ARM: dts: omap4: " Tero Kristo
2019-08-28 7:56 ` Tero Kristo
2019-08-28 7:56 ` Tero Kristo [this message]
2019-08-28 7:56 ` [PATCH 10/10] ARM: dts: omap5: " Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190828075644.4493-11-t-kristo@ti.com \
--to=t-kristo@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.