All of lore.kernel.org
 help / color / mirror / Atom feed
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: narmstrong@baylibre.com, jbrunet@baylibre.com,
	robh+dt@kernel.org, mark.rutland@arm.com,
	linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
	khilman@baylibre.com
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Subject: [PATCH 4/5] clk: meson: meson8b: don't register the XTAL clock when provided via OF
Date: Sat, 21 Sep 2019 17:12:22 +0200	[thread overview]
Message-ID: <20190921151223.768842-5-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20190921151223.768842-1-martin.blumenstingl@googlemail.com>

The XTAL clock is an actual crystal on the PCB. Thus the meson8b clock
driver should not register the XTAL clock - instead it should be
provided via .dts and then passed to the clock controller.

Skip the registration of the XTAL clock if a parent clock is provided
via OF. Fall back to registering the XTAL clock if this is not the case
to keep support for old .dtbs.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/clk/meson/meson8b.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index b785b67baf2b..15ec14fde2a0 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -3682,10 +3682,16 @@ static void __init meson8b_clkc_init_common(struct device_node *np,
 		meson8b_clk_regmaps[i]->map = map;
 
 	/*
-	 * register all clks
-	 * CLKID_UNUSED = 0, so skip it and start with CLKID_XTAL = 1
+	 * always skip CLKID_UNUSED and also skip XTAL if the .dtb provides the
+	 * XTAL clock as input.
 	 */
-	for (i = CLKID_XTAL; i < CLK_NR_CLKS; i++) {
+	if (of_clk_get_parent_count(np))
+		i = CLKID_PLL_FIXED;
+	else
+		i = CLKID_XTAL;
+
+	/* register all clks */
+	for (; i < CLK_NR_CLKS; i++) {
 		/* array might be sparse */
 		if (!clk_hw_onecell_data->hws[i])
 			continue;
-- 
2.23.0


WARNING: multiple messages have this Message-ID (diff)
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: narmstrong@baylibre.com, jbrunet@baylibre.com,
	robh+dt@kernel.org, mark.rutland@arm.com,
	linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
	khilman@baylibre.com
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org
Subject: [PATCH 4/5] clk: meson: meson8b: don't register the XTAL clock when provided via OF
Date: Sat, 21 Sep 2019 17:12:22 +0200	[thread overview]
Message-ID: <20190921151223.768842-5-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20190921151223.768842-1-martin.blumenstingl@googlemail.com>

The XTAL clock is an actual crystal on the PCB. Thus the meson8b clock
driver should not register the XTAL clock - instead it should be
provided via .dts and then passed to the clock controller.

Skip the registration of the XTAL clock if a parent clock is provided
via OF. Fall back to registering the XTAL clock if this is not the case
to keep support for old .dtbs.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/clk/meson/meson8b.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index b785b67baf2b..15ec14fde2a0 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -3682,10 +3682,16 @@ static void __init meson8b_clkc_init_common(struct device_node *np,
 		meson8b_clk_regmaps[i]->map = map;
 
 	/*
-	 * register all clks
-	 * CLKID_UNUSED = 0, so skip it and start with CLKID_XTAL = 1
+	 * always skip CLKID_UNUSED and also skip XTAL if the .dtb provides the
+	 * XTAL clock as input.
 	 */
-	for (i = CLKID_XTAL; i < CLK_NR_CLKS; i++) {
+	if (of_clk_get_parent_count(np))
+		i = CLKID_PLL_FIXED;
+	else
+		i = CLKID_XTAL;
+
+	/* register all clks */
+	for (; i < CLK_NR_CLKS; i++) {
 		/* array might be sparse */
 		if (!clk_hw_onecell_data->hws[i])
 			continue;
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: narmstrong@baylibre.com, jbrunet@baylibre.com,
	robh+dt@kernel.org, mark.rutland@arm.com,
	linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
	khilman@baylibre.com
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org
Subject: [PATCH 4/5] clk: meson: meson8b: don't register the XTAL clock when provided via OF
Date: Sat, 21 Sep 2019 17:12:22 +0200	[thread overview]
Message-ID: <20190921151223.768842-5-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20190921151223.768842-1-martin.blumenstingl@googlemail.com>

The XTAL clock is an actual crystal on the PCB. Thus the meson8b clock
driver should not register the XTAL clock - instead it should be
provided via .dts and then passed to the clock controller.

Skip the registration of the XTAL clock if a parent clock is provided
via OF. Fall back to registering the XTAL clock if this is not the case
to keep support for old .dtbs.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/clk/meson/meson8b.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index b785b67baf2b..15ec14fde2a0 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -3682,10 +3682,16 @@ static void __init meson8b_clkc_init_common(struct device_node *np,
 		meson8b_clk_regmaps[i]->map = map;
 
 	/*
-	 * register all clks
-	 * CLKID_UNUSED = 0, so skip it and start with CLKID_XTAL = 1
+	 * always skip CLKID_UNUSED and also skip XTAL if the .dtb provides the
+	 * XTAL clock as input.
 	 */
-	for (i = CLKID_XTAL; i < CLK_NR_CLKS; i++) {
+	if (of_clk_get_parent_count(np))
+		i = CLKID_PLL_FIXED;
+	else
+		i = CLKID_XTAL;
+
+	/* register all clks */
+	for (; i < CLK_NR_CLKS; i++) {
 		/* array might be sparse */
 		if (!clk_hw_onecell_data->hws[i])
 			continue;
-- 
2.23.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2019-09-21 15:12 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-21 15:12 [PATCH 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl
2019-09-21 15:12 ` [PATCH 1/5] dt-bindings: clock: meson8b: add the clock inputs Martin Blumenstingl
2019-09-21 15:12   ` Martin Blumenstingl
2019-09-21 15:12   ` Martin Blumenstingl
2019-10-02 14:19   ` Rob Herring
2019-10-02 14:19     ` Rob Herring
2019-10-02 14:19     ` Rob Herring
2019-10-02 14:19     ` Rob Herring
2019-09-21 15:12 ` [PATCH 2/5] clk: meson: meson8b: use clk_hw_set_parent in the CPU clock notifier Martin Blumenstingl
2019-09-21 15:12   ` Martin Blumenstingl
2019-09-21 15:12   ` Martin Blumenstingl
2019-09-21 15:12 ` [PATCH 3/5] clk: meson: meson8b: change references to the XTAL clock to use the name Martin Blumenstingl
2019-09-21 15:12   ` Martin Blumenstingl
2019-09-21 15:12   ` Martin Blumenstingl
2019-09-21 15:12 ` Martin Blumenstingl [this message]
2019-09-21 15:12   ` [PATCH 4/5] clk: meson: meson8b: don't register the XTAL clock when provided via OF Martin Blumenstingl
2019-09-21 15:12   ` Martin Blumenstingl
2019-09-23  9:31   ` Jerome Brunet
2019-09-23  9:31     ` Jerome Brunet
2019-09-23  9:31     ` Jerome Brunet
2019-09-23  9:31     ` Jerome Brunet
2019-09-23 20:57     ` Martin Blumenstingl
2019-09-23 20:57       ` Martin Blumenstingl
2019-09-23 20:57       ` Martin Blumenstingl
2019-09-21 15:12 ` [PATCH 5/5] ARM: dts: meson: provide the XTAL clock using a fixed-clock Martin Blumenstingl
2019-09-21 15:12   ` Martin Blumenstingl
2019-09-21 15:12   ` Martin Blumenstingl
2019-09-23  9:29 ` [PATCH 0/5] provide the XTAL clock via OF on Meson8/8b/8m2 Jerome Brunet
2019-09-23  9:29   ` Jerome Brunet
2019-09-23  9:29   ` Jerome Brunet
2019-09-23  9:29   ` Jerome Brunet
2019-09-23 20:56   ` Martin Blumenstingl
2019-09-23 20:56     ` Martin Blumenstingl
2019-09-23 20:56     ` Martin Blumenstingl
2019-09-25 22:47     ` Kevin Hilman
2019-09-25 22:47       ` Kevin Hilman
2019-09-25 22:47       ` Kevin Hilman
2019-09-26 18:34       ` Martin Blumenstingl
2019-09-26 18:34         ` Martin Blumenstingl
2019-09-26 18:34         ` Martin Blumenstingl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190921151223.768842-5-martin.blumenstingl@googlemail.com \
    --to=martin.blumenstingl@googlemail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=narmstrong@baylibre.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.