From: Dan Murphy <dmurphy@ti.com> To: <broonie@kernel.org> Cc: <alsa-devel@alsa-project.org>, <lgirdwood@gmail.com>, <linux-kernel@vger.kernel.org>, <navada@ti.com>, <perex@perex.cz>, <tiwai@suse.com>, Dan Murphy <dmurphy@ti.com> Subject: [PATCH 1/2] ASoc: Add Texas Instruments TAS2562 amplifier binding Date: Tue, 8 Oct 2019 13:15:16 -0500 [thread overview] Message-ID: <20191008181517.5332-1-dmurphy@ti.com> (raw) Add the DT binding for the TAS2562 amplifier. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../devicetree/bindings/sound/tas2562.txt | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas2562.txt diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt new file mode 100644 index 000000000000..658e1fb18a99 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2562.txt @@ -0,0 +1,34 @@ +Texas Instruments TAS2562 Smart PA + +The TAS2562 is a mono, digital input Class-D audio amplifier optimized for +efficiently driving high peak power into small loudspeakers. +Integrated speaker voltage and current sense provides for +real time monitoring of loudspeaker behavior. + +Required properties: + - #address-cells - Should be <1>. + - #size-cells - Should be <0>. + - compatible: - Should contain "ti,tas2562". + - reg: - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f. + - ti,imon-slot-no:- TDM TX current sense time slot. + +Optional properties: +- interrupt-parent: phandle to the interrupt controller which provides + the interrupt. +- interrupts: (GPIO) interrupt to which the chip is connected. +- shut-down: GPIO used to control the state of the device. + +Examples: +tas2562@4c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,tas2562"; + reg = <0x4c>; + + interrupt-parent = <&gpio1>; + interrupts = <14>; + + shut-down = <&gpio1 15 0>; + ti,imon-slot-no = <0>; +}; + -- 2.22.0.214.g8dca754b1e
WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com> To: <broonie@kernel.org> Cc: alsa-devel@alsa-project.org, lgirdwood@gmail.com, linux-kernel@vger.kernel.org, tiwai@suse.com, navada@ti.com, Dan Murphy <dmurphy@ti.com> Subject: [alsa-devel] [PATCH 1/2] ASoc: Add Texas Instruments TAS2562 amplifier binding Date: Tue, 8 Oct 2019 13:15:16 -0500 [thread overview] Message-ID: <20191008181517.5332-1-dmurphy@ti.com> (raw) Add the DT binding for the TAS2562 amplifier. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../devicetree/bindings/sound/tas2562.txt | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas2562.txt diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt new file mode 100644 index 000000000000..658e1fb18a99 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2562.txt @@ -0,0 +1,34 @@ +Texas Instruments TAS2562 Smart PA + +The TAS2562 is a mono, digital input Class-D audio amplifier optimized for +efficiently driving high peak power into small loudspeakers. +Integrated speaker voltage and current sense provides for +real time monitoring of loudspeaker behavior. + +Required properties: + - #address-cells - Should be <1>. + - #size-cells - Should be <0>. + - compatible: - Should contain "ti,tas2562". + - reg: - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f. + - ti,imon-slot-no:- TDM TX current sense time slot. + +Optional properties: +- interrupt-parent: phandle to the interrupt controller which provides + the interrupt. +- interrupts: (GPIO) interrupt to which the chip is connected. +- shut-down: GPIO used to control the state of the device. + +Examples: +tas2562@4c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,tas2562"; + reg = <0x4c>; + + interrupt-parent = <&gpio1>; + interrupts = <14>; + + shut-down = <&gpio1 15 0>; + ti,imon-slot-no = <0>; +}; + -- 2.22.0.214.g8dca754b1e _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2019-10-08 18:16 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-08 18:15 Dan Murphy [this message] 2019-10-08 18:15 ` [alsa-devel] [PATCH 1/2] ASoc: Add Texas Instruments TAS2562 amplifier binding Dan Murphy 2019-10-08 18:15 ` [PATCH 2/2] ASoC: tas2562: Introduce the TAS2562 amplifier Dan Murphy 2019-10-08 18:15 ` [alsa-devel] " Dan Murphy 2019-10-15 20:09 ` [PATCH] ASoC: tas2562: Fix misuse of GENMASK macro Rikard Falkeborn 2019-10-15 20:09 ` [alsa-devel] " Rikard Falkeborn 2019-10-18 18:06 ` Applied "ASoC: tas2562: Fix misuse of GENMASK macro" to the asoc tree Mark Brown 2019-10-18 18:06 ` [alsa-devel] " Mark Brown 2019-10-09 17:21 ` Applied "ASoc: Add Texas Instruments TAS2562 amplifier binding" " Mark Brown 2019-10-09 17:21 ` [alsa-devel] " Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191008181517.5332-1-dmurphy@ti.com \ --to=dmurphy@ti.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=navada@ti.com \ --cc=perex@perex.cz \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.