From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>, <linux-omap@vger.kernel.org>,
<linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Benoit Parrot <bparrot@ti.com>
Subject: [Patch 3/3] ARM: dts: dra7: Add ti-sysc node for VPE
Date: Wed, 9 Oct 2019 12:56:28 -0500 [thread overview]
Message-ID: <20191009175628.20570-4-bparrot@ti.com> (raw)
In-Reply-To: <20191009175628.20570-1-bparrot@ti.com>
Add VPE node as a child of l4 interconnect in order for it to probe
using ti-sysc.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
arch/arm/boot/dts/dra7-l4.dtsi | 30 +++++++++++++++++++++++++++---
1 file changed, 27 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index ea0e7c19eb4e..d876c1754f33 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -4158,12 +4158,36 @@
ranges = <0x0 0x1b0000 0x10000>;
};
- target-module@1d0000 { /* 0x489d0000, ap 27 30.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x1d0010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1d0000 0x10000>;
+
+ vpe: vpe@0 {
+ compatible = "ti,vpe";
+ reg = <0x0000 0x120>,
+ <0x0700 0x80>,
+ <0x5700 0x18>,
+ <0xd000 0x400>;
+ reg-names = "vpe_top",
+ "sc",
+ "csc",
+ "vpdma";
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
};
};
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>,
linux-omap@vger.kernel.org, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Benoit Parrot <bparrot@ti.com>
Subject: [Patch 3/3] ARM: dts: dra7: Add ti-sysc node for VPE
Date: Wed, 9 Oct 2019 12:56:28 -0500 [thread overview]
Message-ID: <20191009175628.20570-4-bparrot@ti.com> (raw)
In-Reply-To: <20191009175628.20570-1-bparrot@ti.com>
Add VPE node as a child of l4 interconnect in order for it to probe
using ti-sysc.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
arch/arm/boot/dts/dra7-l4.dtsi | 30 +++++++++++++++++++++++++++---
1 file changed, 27 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index ea0e7c19eb4e..d876c1754f33 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -4158,12 +4158,36 @@
ranges = <0x0 0x1b0000 0x10000>;
};
- target-module@1d0000 { /* 0x489d0000, ap 27 30.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x1d0010 0x4>;
+ reg-names = "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1d0000 0x10000>;
+
+ vpe: vpe@0 {
+ compatible = "ti,vpe";
+ reg = <0x0000 0x120>,
+ <0x0700 0x80>,
+ <0x5700 0x18>,
+ <0xd000 0x400>;
+ reg-names = "vpe_top",
+ "sc",
+ "csc",
+ "vpdma";
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
};
};
--
2.17.1
next prev parent reply other threads:[~2019-10-09 17:54 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 17:56 [Patch 0/3] ARM: dts: dra7: add vpe nodes Benoit Parrot
2019-10-09 17:56 ` Benoit Parrot
2019-10-09 17:56 ` [Patch 1/3] dt-bindings: media: ti-vpe: Document VPE driver Benoit Parrot
2019-10-09 17:56 ` Benoit Parrot
2019-10-15 22:29 ` Rob Herring
2019-10-16 13:22 ` Benoit Parrot
2019-10-16 13:22 ` Benoit Parrot
2019-10-16 15:36 ` Rob Herring
2019-10-09 17:56 ` [Patch 2/3] ARM: dts: dra7: add vpe clkctrl node Benoit Parrot
2019-10-09 17:56 ` Benoit Parrot
2019-10-09 17:56 ` Benoit Parrot [this message]
2019-10-09 17:56 ` [Patch 3/3] ARM: dts: dra7: Add ti-sysc node for VPE Benoit Parrot
2019-10-22 16:27 ` [Patch 0/3] ARM: dts: dra7: add vpe nodes Benoit Parrot
2019-10-22 16:27 ` Benoit Parrot
2019-10-22 16:30 ` Tony Lindgren
2019-10-22 16:33 ` Benoit Parrot
2019-10-22 16:33 ` Benoit Parrot
2019-10-22 16:37 ` Tony Lindgren
2019-10-22 16:44 ` Benoit Parrot
2019-10-22 16:44 ` Benoit Parrot
2019-10-22 16:46 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191009175628.20570-4-bparrot@ti.com \
--to=bparrot@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.