From: Kamel Bouhara <kamel.bouhara@bootlin.com>
To: Rob Herring <robh+dt@kernel.org>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ludovic Desroches <ludovic.desroches@microchip.com>,
linux-arm-kernel@lists.infradead.org
Cc: "Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
"Kamel Bouhara" <kamel.bouhara@bootlin.com>,
"Kévin RAYMOND" <k.raymond@overkiz.com>,
"Mickael GARDET" <m.gardet@overkiz.com>
Subject: [PATCH 2/2] ARM: dts: at91: add a common kizbox2 dtsi file
Date: Thu, 17 Oct 2019 14:24:18 +0200 [thread overview]
Message-ID: <20191017122418.18855-1-kamel.bouhara@bootlin.com> (raw)
In-Reply-To: <20191017094028.14259-1-kamel.bouhara@bootlin.com>
There are three different boards available depending on the PCB
(3 antennas support and several revison). Add a dtsi file to share
common binding between all kizbox2 boards.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Kévin RAYMOND <k.raymond@overkiz.com>
Signed-off-by: Mickael GARDET <m.gardet@overkiz.com>
---
arch/arm/boot/dts/Makefile | 6 +-
arch/arm/boot/dts/at91-kizbox.dts | 173 +++++++-------
arch/arm/boot/dts/at91-kizbox2-0.dts | 17 ++
arch/arm/boot/dts/at91-kizbox2-1.dts | 22 ++
arch/arm/boot/dts/at91-kizbox2-2.dts | 26 +++
arch/arm/boot/dts/at91-kizbox2-3.dts | 30 +++
arch/arm/boot/dts/at91-kizbox2-rev2.dts | 34 +++
arch/arm/boot/dts/at91-kizbox2.dts | 244 -------------------
arch/arm/boot/dts/at91-kizbox2_common.dtsi | 258 +++++++++++++++++++++
9 files changed, 477 insertions(+), 333 deletions(-)
create mode 100644 arch/arm/boot/dts/at91-kizbox2-0.dts
create mode 100644 arch/arm/boot/dts/at91-kizbox2-1.dts
create mode 100644 arch/arm/boot/dts/at91-kizbox2-2.dts
create mode 100644 arch/arm/boot/dts/at91-kizbox2-3.dts
create mode 100644 arch/arm/boot/dts/at91-kizbox2-rev2.dts
delete mode 100644 arch/arm/boot/dts/at91-kizbox2.dts
create mode 100644 arch/arm/boot/dts/at91-kizbox2_common.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3bda216c41be..c976b72a4c94 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -45,7 +45,11 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
- at91-kizbox2.dtb \
+ at91-kizbox2-0.dtb \
+ at91-kizbox2-1.dtb \
+ at91-kizbox2-2.dtb \
+ at91-kizbox2-rev2.dtb \
+ at91-kizbox2-3.dtb \
at91-kizbox3-hs.dtb \
at91-nattis-2-natte-2.dtb \
at91-sama5d27_som1_ek.dtb \
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 90996eaf73b2..9eb1ea750159 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -28,85 +28,6 @@
};
};
- ahb {
- apb {
- tcb0: timer@fffa0000 {
- timer@0 {
- compatible = "atmel,tcb-timer";
- reg = <0>, <1>;
- };
-
- timer@2 {
- compatible = "atmel,tcb-timer";
- reg = <2>;
- };
- };
-
- macb0: ethernet@fffc4000 {
- phy-mode = "mii";
- pinctrl-0 = <&pinctrl_macb_rmii
- &pinctrl_macb_rmii_mii_alt>;
- status = "okay";
- };
-
- usart3: serial@fffd0000 {
- status = "okay";
- };
-
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- watchdog@fffffd40 {
- timeout-sec = <15>;
- atmel,max-heartbeat-sec = <16>;
- atmel,min-heartbeat-sec = <0>;
- status = "okay";
- };
- };
-
- usb0: ohci@500000 {
- num-ports = <1>;
- status = "okay";
- };
-
- ebi: ebi@10000000 {
- status = "okay";
-
- nand_controller: nand-controller {
- status = "okay";
- pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
- pinctrl-names = "default";
-
- nand@3 {
- reg = <0x3 0x0 0x800000>;
- rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
- nand-bus-width = <8>;
- nand-ecc-mode = "soft";
- nand-on-flash-bbt;
- label = "atmel_nand";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- bootstrap@0 {
- label = "bootstrap";
- reg = <0x0 0x20000>;
- };
-
- ubi@20000 {
- label = "ubi";
- reg = <0x20000 0x7fe0000>;
- };
- };
- };
- };
- };
- };
-
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
@@ -127,15 +48,6 @@
};
};
- i2c-gpio-0 {
- status = "okay";
-
- rtc: pcf8563@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
- };
-
pwm_leds {
compatible = "pwm-leds";
@@ -179,3 +91,88 @@
&pinctrl_tcb1_tiob0>;
};
};
+
+&tcb0 {
+ timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>, <1>;
+ };
+
+ timer@2 {
+ compatible = "atmel,tcb-timer";
+ reg = <2>;
+ };
+};
+
+&ebi {
+ status = "okay";
+};
+
+&nand_controller {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+ pinctrl-names = "default";
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+};
+
+&macb0 {
+ phy-mode = "mii";
+ pinctrl-0 = <&pinctrl_macb_rmii
+ &pinctrl_macb_rmii_mii_alt>;
+ status = "okay";
+};
+
+&usart3 {
+ status = "okay";
+};
+
+&dbgu {
+ status = "okay";
+};
+
+&watchdog {
+ timeout-sec = <15>;
+ atmel,max-heartbeat-sec = <16>;
+ atmel,min-heartbeat-sec = <0>;
+ status = "okay";
+};
+
+&usb0 {
+ num-ports = <1>;
+ status = "okay";
+};
+
+&i2c-gpio-0 {
+ status = "okay";
+
+ rtc: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
diff --git a/arch/arm/boot/dts/at91-kizbox2-0.dts b/arch/arm/boot/dts/at91-kizbox2-0.dts
new file mode 100644
index 000000000000..fd3f81fc0526
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-0.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-0.dts - Device Tree file for the Kizbox 2 board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2_common.dtsi"
+
+/ {
+ model = "Overkiz Kizbox 2 Mother Board";
+ compatible = "overkiz,kizbox2-0", "atmel,sama5d31",
+ "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2-1.dts b/arch/arm/boot/dts/at91-kizbox2-1.dts
new file mode 100644
index 000000000000..00b26b5be466
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-1.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-1.dts - Device Tree file for the Kizbox 2 with one
+ * head board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2_common.dtsi"
+
+/ {
+ model = "Overkiz Kizbox 2 with one head";
+ compatible = "overkiz,kizbox2-1", "atmel,sama5d31",
+ "atmel,sama5d3", "atmel,sama5";
+};
+
+&usart1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2-2.dts b/arch/arm/boot/dts/at91-kizbox2-2.dts
new file mode 100644
index 000000000000..7251c14878cd
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-2.dts - Device Tree file for the Kizbox2 with
+ * two head board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2_common.dtsi"
+
+/ {
+ model = "Overkiz Kizbox 2 with two heads";
+ compatible = "overkiz,kizbox2-2", "atmel,sama5d31",
+ "atmel,sama5d3", "atmel,sama5";
+};
+
+&usart1 {
+ status = "okay";
+};
+
+&usart2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2-3.dts b/arch/arm/boot/dts/at91-kizbox2-3.dts
new file mode 100644
index 000000000000..004854eae512
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-3.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-3.dts - Device Tree file for the Kizbox2 with three
+ * heads board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2_common.dtsi"
+
+/ {
+ model = "Overkiz Kizbox 2 with three heads";
+ compatible = "overkiz,kizbox2-3", "atmel,sama5d31",
+ "atmel,sama5d3", "atmel,sama5";
+};
+
+&usart0 {
+ status = "okay";
+};
+
+&usart1 {
+ status = "okay";
+};
+
+&usart2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2-rev2.dts b/arch/arm/boot/dts/at91-kizbox2-rev2.dts
new file mode 100644
index 000000000000..00d7185e186a
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-rev2.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-rev2.dts - Device Tree file for the Kizbox2 rev2 with
+ * two heads board
+ *
+ * Copyright (C) 2017 Overkiz SAS
+ *
+ * Author: Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2_common.dtsi"
+
+/ {
+ model = "Overkiz Kizbox 2 Rev 2 with two heads";
+ compatible = "overkiz,kizbox2-rev2", "atmel,sama5d31",
+ "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ gpio_keys {
+ user {
+ status = "disabled";
+ };
+ };
+ };
+};
+
+&usart1 {
+ status = "okay";
+};
+
+&usart2 {
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
deleted file mode 100644
index 86d821884bd4..000000000000
--- a/arch/arm/boot/dts/at91-kizbox2.dts
+++ /dev/null
@@ -1,244 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board
- *
- * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
- */
-/dts-v1/;
-#include "sama5d31.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- model = "Overkiz Kizbox 2";
- compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
- chosen {
- bootargs = "ubi.mtd=ubi";
- stdout-path = &dbgu;
- };
-
- memory {
- reg = <0x20000000 0x10000000>;
- };
-
- clocks {
- slow_xtal {
- clock-frequency = <32768>;
- };
-
- main_xtal {
- clock-frequency = <12000000>;
- };
- };
-
- ahb {
- apb {
- i2c1: i2c@f0018000 {
- status = "okay";
-
- pmic: act8865@5b {
- compatible = "active-semi,act8865";
- reg = <0x5b>;
- status = "okay";
-
- regulators {
- vcc_1v8_reg: DCDC_REG1 {
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcc_1v2_reg: DCDC_REG2 {
- regulator-name = "VCC_1V2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- vcc_3v3_reg: DCDC_REG3 {
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vddfuse_reg: LDO_REG1 {
- regulator-name = "FUSE_2V5";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- };
-
- vddana_reg: LDO_REG2 {
- regulator-name = "VDDANA";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vled_reg: LDO_REG3 {
- regulator-name = "VLED";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- v3v8_rf_reg: LDO_REG4 {
- regulator-name = "V3V8_RF";
- regulator-min-microvolt = <3800000>;
- regulator-max-microvolt = <3800000>;
- regulator-always-on;
- };
- };
- };
- };
-
- tcb0: timer@f0010000 {
- timer@0 {
- compatible = "atmel,tcb-timer";
- reg = <0>;
- };
-
- timer@1 {
- compatible = "atmel,tcb-timer";
- reg = <1>;
- };
- };
-
- usart0: serial@f001c000 {
- status = "okay";
- };
-
- usart1: serial@f0020000 {
- status = "okay";
- };
-
- pwm0: pwm@f002c000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
- &pinctrl_pwm0_pwmh1_1
- &pinctrl_pwm0_pwmh2_0>;
- status = "okay";
- };
-
- adc0: adc@f8018000 {
- atmel,adc-vref = <3333>;
- status = "okay";
- };
-
- usart2: serial@f8020000 {
- status = "okay";
- };
-
- macb1: ethernet@f802c000 {
- phy-mode = "rmii";
- status = "okay";
- };
-
- dbgu: serial@ffffee00 {
- status = "okay";
- };
-
- watchdog@fffffe40 {
- status = "okay";
- };
- };
-
- usb1: ohci@600000 {
- status = "okay";
- };
-
- usb2: ehci@700000 {
- status = "okay";
- };
-
- ebi: ebi@10000000 {
- pinctrl-0 = <&pinctrl_ebi_nand_addr>;
- pinctrl-names = "default";
- status = "okay";
-
- nand_controller: nand-controller {
- status = "okay";
-
- nand@3 {
- reg = <0x3 0x0 0x2>;
- atmel,rb = <0>;
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- nand-on-flash-bbt;
- label = "atmel_nand";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- bootstrap@0 {
- label = "bootstrap";
- reg = <0x0 0x20000>;
- };
-
- ubi@20000 {
- label = "ubi";
- reg = <0x20000 0x7fe0000>;
- };
- };
- };
- };
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- prog {
- label = "PB_PROG";
- gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
- linux,code = <0x102>;
- wakeup-source;
- };
-
- reset {
- label = "PB_RST";
- gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
- linux,code = <0x100>;
- wakeup-source;
- };
-
- user {
- label = "PB_USER";
- gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
- linux,code = <0x101>;
- wakeup-source;
- };
- };
-
- pwm_leds {
- compatible = "pwm-leds";
-
- blue {
- label = "pwm:blue:user";
- pwms = <&pwm0 2 10000000 0>;
- max-brightness = <255>;
- linux,default-trigger = "default-on";
- };
-
- green {
- label = "pwm:green:user";
- pwms = <&pwm0 1 10000000 0>;
- max-brightness = <255>;
- linux,default-trigger = "default-on";
- };
-
- red {
- label = "pwm:red:user";
- pwms = <&pwm0 0 10000000 0>;
- max-brightness = <255>;
- linux,default-trigger = "default-on";
- };
- };
-};
diff --git a/arch/arm/boot/dts/at91-kizbox2_common.dtsi b/arch/arm/boot/dts/at91-kizbox2_common.dtsi
new file mode 100644
index 000000000000..b8f644e4cf22
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2_common.dtsi
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2_common.dtsi - Device Tree Include file for
+ * Overkiz Kizbox 2 family SoC
+ *
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ * Gaël Portay <g.portay@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ */
+#include "sama5d31.dtsi"
+
+/ {
+ chosen {
+ bootargs = "ubi.mtd=ubi";
+ stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ prog {
+ label = "PB_PROG";
+ gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
+ linux,code = <0x102>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "PB_RST";
+ gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+ linux,code = <0x100>;
+ wakeup-source;
+ };
+
+ user {
+ label = "PB_USER";
+ gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x101>;
+ wakeup-source;
+ };
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+
+ blue {
+ label = "pwm:blue:user";
+ pwms = <&pwm0 2 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "none";
+ };
+
+ green {
+ label = "pwm:green:user";
+ pwms = <&pwm0 1 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ red {
+ label = "pwm:red:user";
+ pwms = <&pwm0 0 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ pmic: act8865@5b {
+ compatible = "active-semi,act8865";
+ reg = <0x5b>;
+ status = "okay";
+
+ regulators {
+ vcc_1v8_reg: DCDC_REG1 {
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_1v2_reg: DCDC_REG2 {
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_3v3_reg: DCDC_REG3 {
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddfuse_reg: LDO_REG1 {
+ regulator-name = "FUSE_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ vddana_reg: LDO_REG2 {
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vled_reg: LDO_REG3 {
+ regulator-name = "VLED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ v3v8_rf_reg: LDO_REG4 {
+ regulator-name = "V3V8_RF";
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&usart0 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+};
+
+&usart1 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+};
+
+&usart2 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
+ &pinctrl_pwm0_pwmh1_1
+ &pinctrl_pwm0_pwmh2_0>;
+ status = "okay";
+};
+
+&adc0 {
+ atmel,adc-vref = <3333>;
+ status = "okay";
+};
+
+&macb1 {
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&dbgu {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&ebi {
+ pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&nand_controller {
+ status = "okay";
+
+ nand@3 {
+ reg = <0x3 0x0 0x2>;
+ atmel,rb = <0>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+// WMBUS (inverted with IO in the latest schematic)
+&pinctrl_usart0 {
+ atmel,pins =
+ <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+// RTS
+&pinctrl_usart1 {
+ atmel,pins =
+ <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOE 7 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+// IO (inverted with WMBUS in the latest schematic)
+&pinctrl_usart2 {
+ atmel,pins =
+ <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE
+ AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
+ AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
--
2.23.0
WARNING: multiple messages have this Message-ID (diff)
From: Kamel Bouhara <kamel.bouhara@bootlin.com>
To: Rob Herring <robh+dt@kernel.org>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ludovic Desroches <ludovic.desroches@microchip.com>,
linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org,
"Kamel Bouhara" <kamel.bouhara@bootlin.com>,
"Mickael GARDET" <m.gardet@overkiz.com>,
linux-kernel@vger.kernel.org,
"Kévin RAYMOND" <k.raymond@overkiz.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>
Subject: [PATCH 2/2] ARM: dts: at91: add a common kizbox2 dtsi file
Date: Thu, 17 Oct 2019 14:24:18 +0200 [thread overview]
Message-ID: <20191017122418.18855-1-kamel.bouhara@bootlin.com> (raw)
In-Reply-To: <20191017094028.14259-1-kamel.bouhara@bootlin.com>
There are three different boards available depending on the PCB
(3 antennas support and several revison). Add a dtsi file to share
common binding between all kizbox2 boards.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Kévin RAYMOND <k.raymond@overkiz.com>
Signed-off-by: Mickael GARDET <m.gardet@overkiz.com>
---
arch/arm/boot/dts/Makefile | 6 +-
arch/arm/boot/dts/at91-kizbox.dts | 173 +++++++-------
arch/arm/boot/dts/at91-kizbox2-0.dts | 17 ++
arch/arm/boot/dts/at91-kizbox2-1.dts | 22 ++
arch/arm/boot/dts/at91-kizbox2-2.dts | 26 +++
arch/arm/boot/dts/at91-kizbox2-3.dts | 30 +++
arch/arm/boot/dts/at91-kizbox2-rev2.dts | 34 +++
arch/arm/boot/dts/at91-kizbox2.dts | 244 -------------------
arch/arm/boot/dts/at91-kizbox2_common.dtsi | 258 +++++++++++++++++++++
9 files changed, 477 insertions(+), 333 deletions(-)
create mode 100644 arch/arm/boot/dts/at91-kizbox2-0.dts
create mode 100644 arch/arm/boot/dts/at91-kizbox2-1.dts
create mode 100644 arch/arm/boot/dts/at91-kizbox2-2.dts
create mode 100644 arch/arm/boot/dts/at91-kizbox2-3.dts
create mode 100644 arch/arm/boot/dts/at91-kizbox2-rev2.dts
delete mode 100644 arch/arm/boot/dts/at91-kizbox2.dts
create mode 100644 arch/arm/boot/dts/at91-kizbox2_common.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3bda216c41be..c976b72a4c94 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -45,7 +45,11 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
at91sam9x25ek.dtb \
at91sam9x35ek.dtb
dtb-$(CONFIG_SOC_SAM_V7) += \
- at91-kizbox2.dtb \
+ at91-kizbox2-0.dtb \
+ at91-kizbox2-1.dtb \
+ at91-kizbox2-2.dtb \
+ at91-kizbox2-rev2.dtb \
+ at91-kizbox2-3.dtb \
at91-kizbox3-hs.dtb \
at91-nattis-2-natte-2.dtb \
at91-sama5d27_som1_ek.dtb \
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 90996eaf73b2..9eb1ea750159 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -28,85 +28,6 @@
};
};
- ahb {
- apb {
- tcb0: timer@fffa0000 {
- timer@0 {
- compatible = "atmel,tcb-timer";
- reg = <0>, <1>;
- };
-
- timer@2 {
- compatible = "atmel,tcb-timer";
- reg = <2>;
- };
- };
-
- macb0: ethernet@fffc4000 {
- phy-mode = "mii";
- pinctrl-0 = <&pinctrl_macb_rmii
- &pinctrl_macb_rmii_mii_alt>;
- status = "okay";
- };
-
- usart3: serial@fffd0000 {
- status = "okay";
- };
-
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- watchdog@fffffd40 {
- timeout-sec = <15>;
- atmel,max-heartbeat-sec = <16>;
- atmel,min-heartbeat-sec = <0>;
- status = "okay";
- };
- };
-
- usb0: ohci@500000 {
- num-ports = <1>;
- status = "okay";
- };
-
- ebi: ebi@10000000 {
- status = "okay";
-
- nand_controller: nand-controller {
- status = "okay";
- pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
- pinctrl-names = "default";
-
- nand@3 {
- reg = <0x3 0x0 0x800000>;
- rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
- nand-bus-width = <8>;
- nand-ecc-mode = "soft";
- nand-on-flash-bbt;
- label = "atmel_nand";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- bootstrap@0 {
- label = "bootstrap";
- reg = <0x0 0x20000>;
- };
-
- ubi@20000 {
- label = "ubi";
- reg = <0x20000 0x7fe0000>;
- };
- };
- };
- };
- };
- };
-
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
@@ -127,15 +48,6 @@
};
};
- i2c-gpio-0 {
- status = "okay";
-
- rtc: pcf8563@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
- };
-
pwm_leds {
compatible = "pwm-leds";
@@ -179,3 +91,88 @@
&pinctrl_tcb1_tiob0>;
};
};
+
+&tcb0 {
+ timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>, <1>;
+ };
+
+ timer@2 {
+ compatible = "atmel,tcb-timer";
+ reg = <2>;
+ };
+};
+
+&ebi {
+ status = "okay";
+};
+
+&nand_controller {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+ pinctrl-names = "default";
+
+ nand@3 {
+ reg = <0x3 0x0 0x800000>;
+ rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+};
+
+&macb0 {
+ phy-mode = "mii";
+ pinctrl-0 = <&pinctrl_macb_rmii
+ &pinctrl_macb_rmii_mii_alt>;
+ status = "okay";
+};
+
+&usart3 {
+ status = "okay";
+};
+
+&dbgu {
+ status = "okay";
+};
+
+&watchdog {
+ timeout-sec = <15>;
+ atmel,max-heartbeat-sec = <16>;
+ atmel,min-heartbeat-sec = <0>;
+ status = "okay";
+};
+
+&usb0 {
+ num-ports = <1>;
+ status = "okay";
+};
+
+&i2c-gpio-0 {
+ status = "okay";
+
+ rtc: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
diff --git a/arch/arm/boot/dts/at91-kizbox2-0.dts b/arch/arm/boot/dts/at91-kizbox2-0.dts
new file mode 100644
index 000000000000..fd3f81fc0526
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-0.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-0.dts - Device Tree file for the Kizbox 2 board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2_common.dtsi"
+
+/ {
+ model = "Overkiz Kizbox 2 Mother Board";
+ compatible = "overkiz,kizbox2-0", "atmel,sama5d31",
+ "atmel,sama5d3", "atmel,sama5";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2-1.dts b/arch/arm/boot/dts/at91-kizbox2-1.dts
new file mode 100644
index 000000000000..00b26b5be466
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-1.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-1.dts - Device Tree file for the Kizbox 2 with one
+ * head board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2_common.dtsi"
+
+/ {
+ model = "Overkiz Kizbox 2 with one head";
+ compatible = "overkiz,kizbox2-1", "atmel,sama5d31",
+ "atmel,sama5d3", "atmel,sama5";
+};
+
+&usart1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2-2.dts b/arch/arm/boot/dts/at91-kizbox2-2.dts
new file mode 100644
index 000000000000..7251c14878cd
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-2.dts - Device Tree file for the Kizbox2 with
+ * two head board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2_common.dtsi"
+
+/ {
+ model = "Overkiz Kizbox 2 with two heads";
+ compatible = "overkiz,kizbox2-2", "atmel,sama5d31",
+ "atmel,sama5d3", "atmel,sama5";
+};
+
+&usart1 {
+ status = "okay";
+};
+
+&usart2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2-3.dts b/arch/arm/boot/dts/at91-kizbox2-3.dts
new file mode 100644
index 000000000000..004854eae512
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-3.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-3.dts - Device Tree file for the Kizbox2 with three
+ * heads board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2_common.dtsi"
+
+/ {
+ model = "Overkiz Kizbox 2 with three heads";
+ compatible = "overkiz,kizbox2-3", "atmel,sama5d31",
+ "atmel,sama5d3", "atmel,sama5";
+};
+
+&usart0 {
+ status = "okay";
+};
+
+&usart1 {
+ status = "okay";
+};
+
+&usart2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2-rev2.dts b/arch/arm/boot/dts/at91-kizbox2-rev2.dts
new file mode 100644
index 000000000000..00d7185e186a
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-rev2.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-rev2.dts - Device Tree file for the Kizbox2 rev2 with
+ * two heads board
+ *
+ * Copyright (C) 2017 Overkiz SAS
+ *
+ * Author: Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2_common.dtsi"
+
+/ {
+ model = "Overkiz Kizbox 2 Rev 2 with two heads";
+ compatible = "overkiz,kizbox2-rev2", "atmel,sama5d31",
+ "atmel,sama5d3", "atmel,sama5";
+
+ ahb {
+ gpio_keys {
+ user {
+ status = "disabled";
+ };
+ };
+ };
+};
+
+&usart1 {
+ status = "okay";
+};
+
+&usart2 {
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
deleted file mode 100644
index 86d821884bd4..000000000000
--- a/arch/arm/boot/dts/at91-kizbox2.dts
+++ /dev/null
@@ -1,244 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board
- *
- * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
- */
-/dts-v1/;
-#include "sama5d31.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- model = "Overkiz Kizbox 2";
- compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
- chosen {
- bootargs = "ubi.mtd=ubi";
- stdout-path = &dbgu;
- };
-
- memory {
- reg = <0x20000000 0x10000000>;
- };
-
- clocks {
- slow_xtal {
- clock-frequency = <32768>;
- };
-
- main_xtal {
- clock-frequency = <12000000>;
- };
- };
-
- ahb {
- apb {
- i2c1: i2c@f0018000 {
- status = "okay";
-
- pmic: act8865@5b {
- compatible = "active-semi,act8865";
- reg = <0x5b>;
- status = "okay";
-
- regulators {
- vcc_1v8_reg: DCDC_REG1 {
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcc_1v2_reg: DCDC_REG2 {
- regulator-name = "VCC_1V2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- vcc_3v3_reg: DCDC_REG3 {
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vddfuse_reg: LDO_REG1 {
- regulator-name = "FUSE_2V5";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- };
-
- vddana_reg: LDO_REG2 {
- regulator-name = "VDDANA";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- vled_reg: LDO_REG3 {
- regulator-name = "VLED";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- v3v8_rf_reg: LDO_REG4 {
- regulator-name = "V3V8_RF";
- regulator-min-microvolt = <3800000>;
- regulator-max-microvolt = <3800000>;
- regulator-always-on;
- };
- };
- };
- };
-
- tcb0: timer@f0010000 {
- timer@0 {
- compatible = "atmel,tcb-timer";
- reg = <0>;
- };
-
- timer@1 {
- compatible = "atmel,tcb-timer";
- reg = <1>;
- };
- };
-
- usart0: serial@f001c000 {
- status = "okay";
- };
-
- usart1: serial@f0020000 {
- status = "okay";
- };
-
- pwm0: pwm@f002c000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
- &pinctrl_pwm0_pwmh1_1
- &pinctrl_pwm0_pwmh2_0>;
- status = "okay";
- };
-
- adc0: adc@f8018000 {
- atmel,adc-vref = <3333>;
- status = "okay";
- };
-
- usart2: serial@f8020000 {
- status = "okay";
- };
-
- macb1: ethernet@f802c000 {
- phy-mode = "rmii";
- status = "okay";
- };
-
- dbgu: serial@ffffee00 {
- status = "okay";
- };
-
- watchdog@fffffe40 {
- status = "okay";
- };
- };
-
- usb1: ohci@600000 {
- status = "okay";
- };
-
- usb2: ehci@700000 {
- status = "okay";
- };
-
- ebi: ebi@10000000 {
- pinctrl-0 = <&pinctrl_ebi_nand_addr>;
- pinctrl-names = "default";
- status = "okay";
-
- nand_controller: nand-controller {
- status = "okay";
-
- nand@3 {
- reg = <0x3 0x0 0x2>;
- atmel,rb = <0>;
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- nand-on-flash-bbt;
- label = "atmel_nand";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- bootstrap@0 {
- label = "bootstrap";
- reg = <0x0 0x20000>;
- };
-
- ubi@20000 {
- label = "ubi";
- reg = <0x20000 0x7fe0000>;
- };
- };
- };
- };
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
-
- prog {
- label = "PB_PROG";
- gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
- linux,code = <0x102>;
- wakeup-source;
- };
-
- reset {
- label = "PB_RST";
- gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
- linux,code = <0x100>;
- wakeup-source;
- };
-
- user {
- label = "PB_USER";
- gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
- linux,code = <0x101>;
- wakeup-source;
- };
- };
-
- pwm_leds {
- compatible = "pwm-leds";
-
- blue {
- label = "pwm:blue:user";
- pwms = <&pwm0 2 10000000 0>;
- max-brightness = <255>;
- linux,default-trigger = "default-on";
- };
-
- green {
- label = "pwm:green:user";
- pwms = <&pwm0 1 10000000 0>;
- max-brightness = <255>;
- linux,default-trigger = "default-on";
- };
-
- red {
- label = "pwm:red:user";
- pwms = <&pwm0 0 10000000 0>;
- max-brightness = <255>;
- linux,default-trigger = "default-on";
- };
- };
-};
diff --git a/arch/arm/boot/dts/at91-kizbox2_common.dtsi b/arch/arm/boot/dts/at91-kizbox2_common.dtsi
new file mode 100644
index 000000000000..b8f644e4cf22
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2_common.dtsi
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2_common.dtsi - Device Tree Include file for
+ * Overkiz Kizbox 2 family SoC
+ *
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ * Gaël Portay <g.portay@overkiz.com>
+ * Kévin Raymond <k.raymond@overkiz.com>
+ */
+#include "sama5d31.dtsi"
+
+/ {
+ chosen {
+ bootargs = "ubi.mtd=ubi";
+ stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ prog {
+ label = "PB_PROG";
+ gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
+ linux,code = <0x102>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "PB_RST";
+ gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+ linux,code = <0x100>;
+ wakeup-source;
+ };
+
+ user {
+ label = "PB_USER";
+ gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+ linux,code = <0x101>;
+ wakeup-source;
+ };
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+
+ blue {
+ label = "pwm:blue:user";
+ pwms = <&pwm0 2 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "none";
+ };
+
+ green {
+ label = "pwm:green:user";
+ pwms = <&pwm0 1 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+
+ red {
+ label = "pwm:red:user";
+ pwms = <&pwm0 0 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ pmic: act8865@5b {
+ compatible = "active-semi,act8865";
+ reg = <0x5b>;
+ status = "okay";
+
+ regulators {
+ vcc_1v8_reg: DCDC_REG1 {
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_1v2_reg: DCDC_REG2 {
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_3v3_reg: DCDC_REG3 {
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vddfuse_reg: LDO_REG1 {
+ regulator-name = "FUSE_2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ vddana_reg: LDO_REG2 {
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vled_reg: LDO_REG3 {
+ regulator-name = "VLED";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ v3v8_rf_reg: LDO_REG4 {
+ regulator-name = "V3V8_RF";
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&usart0 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+};
+
+&usart1 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+};
+
+&usart2 {
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
+ &pinctrl_pwm0_pwmh1_1
+ &pinctrl_pwm0_pwmh2_0>;
+ status = "okay";
+};
+
+&adc0 {
+ atmel,adc-vref = <3333>;
+ status = "okay";
+};
+
+&macb1 {
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&dbgu {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&ebi {
+ pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&nand_controller {
+ status = "okay";
+
+ nand@3 {
+ reg = <0x3 0x0 0x2>;
+ atmel,rb = <0>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-on-flash-bbt;
+ label = "atmel_nand";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootstrap@0 {
+ label = "bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ ubi@20000 {
+ label = "ubi";
+ reg = <0x20000 0x7fe0000>;
+ };
+ };
+ };
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+// WMBUS (inverted with IO in the latest schematic)
+&pinctrl_usart0 {
+ atmel,pins =
+ <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+// RTS
+&pinctrl_usart1 {
+ atmel,pins =
+ <AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+ AT91_PIOE 7 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+// IO (inverted with WMBUS in the latest schematic)
+&pinctrl_usart2 {
+ atmel,pins =
+ <AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE
+ AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
+ AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-17 12:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-17 9:40 [PATCH 0/2] Add Kizboxmini boards support Kamel Bouhara
2019-10-17 9:40 ` Kamel Bouhara
2019-10-17 9:40 ` [PATCH 1/2] dt-bindings: arm: at91: Document Kizboxmini boards binding Kamel Bouhara
2019-10-17 9:40 ` Kamel Bouhara
2019-10-17 12:24 ` Kamel Bouhara [this message]
2019-10-17 12:24 ` [PATCH 2/2] ARM: dts: at91: add a common kizbox2 dtsi file Kamel Bouhara
-- strict thread matches above, loose matches on Subject: below --
2019-10-17 8:54 [PATCH 0/2] Add a Kizbox2 dtsi and documentation Kamel Bouhara
2019-10-17 8:54 ` [PATCH 2/2] ARM: dts: at91: add a common kizbox2 dtsi file Kamel Bouhara
2019-10-17 8:54 ` Kamel Bouhara
2019-10-17 9:04 ` Thomas Petazzoni
2019-10-17 9:04 ` Thomas Petazzoni
2019-10-17 9:26 ` Kamel Bouhara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191017122418.18855-1-kamel.bouhara@bootlin.com \
--to=kamel.bouhara@bootlin.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=k.raymond@overkiz.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=m.gardet@overkiz.com \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.