From: Mohammad Rasim <mohammad.rasim96@gmail.com> To: linux-bluetooth@vger.kernel.org, Johan Hedberg <johan.hedberg@gmail.com>, Marcel Holtmann <marcel@holtmann.org>, linux-amlogic@lists.infradead.org Cc: Mohammad Rasim <mohammad.rasim96@gmail.com> Subject: [PATCH v2 2/2] Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth Date: Wed, 20 Nov 2019 14:02:35 +0300 [thread overview] Message-ID: <20191120110235.13987-3-mohammad.rasim96@gmail.com> (raw) In-Reply-To: <20191120110235.13987-1-mohammad.rasim96@gmail.com> This patch adds the device ID for the BCM4335A0 module (part of the AMPAK AP6335 WIFI/Bluetooth combo) hciconfig output: ``` hci1: Type: Primary Bus: UART BD Address: 43:35:B0:07:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:5079 acl:0 sco:0 events:567 errors:0 TX bytes:69065 acl:0 sco:0 commands:567 errors:0 Features: 0xbf 0xfe 0xcf 0xff 0xdf 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'alarm' Class: 0x000000 Service Classes: Unspecified Device Class: Miscellaneous, HCI Version: 4.0 (0x6) Revision: 0x161 LMP Version: 4.0 (0x6) Subversion: 0x4106 Manufacturer: Broadcom Corporation (15) ``` Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com> --- drivers/bluetooth/btbcm.c | 1 + drivers/bluetooth/hci_bcm.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c index 0bb9023ec214..689c7f36fea2 100644 --- a/drivers/bluetooth/btbcm.c +++ b/drivers/bluetooth/btbcm.c @@ -342,6 +342,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = { { 0x220e, "BCM20702A1" }, /* 001.002.014 */ { 0x4217, "BCM4329B1" }, /* 002.002.023 */ { 0x6106, "BCM4359C0" }, /* 003.001.006 */ + { 0x4106, "BCM4335A0" }, /* 002.001.006 */ { } }; diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c index 0f851c0dde7f..d2a6a4afdbbb 100644 --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -1425,6 +1425,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = { { .compatible = "brcm,bcm4330-bt" }, { .compatible = "brcm,bcm43438-bt" }, { .compatible = "brcm,bcm43540-bt" }, + { .compatible = "brcm,bcm4335a0" }, { }, }; MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match); -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Mohammad Rasim <mohammad.rasim96@gmail.com> To: linux-bluetooth@vger.kernel.org, Johan Hedberg <johan.hedberg@gmail.com>, Marcel Holtmann <marcel@holtmann.org>, linux-amlogic@lists.infradead.org Cc: Mohammad Rasim <mohammad.rasim96@gmail.com> Subject: [PATCH v2 2/2] Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth Date: Wed, 20 Nov 2019 14:02:35 +0300 [thread overview] Message-ID: <20191120110235.13987-3-mohammad.rasim96@gmail.com> (raw) In-Reply-To: <20191120110235.13987-1-mohammad.rasim96@gmail.com> This patch adds the device ID for the BCM4335A0 module (part of the AMPAK AP6335 WIFI/Bluetooth combo) hciconfig output: ``` hci1: Type: Primary Bus: UART BD Address: 43:35:B0:07:1F:AC ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:5079 acl:0 sco:0 events:567 errors:0 TX bytes:69065 acl:0 sco:0 commands:567 errors:0 Features: 0xbf 0xfe 0xcf 0xff 0xdf 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'alarm' Class: 0x000000 Service Classes: Unspecified Device Class: Miscellaneous, HCI Version: 4.0 (0x6) Revision: 0x161 LMP Version: 4.0 (0x6) Subversion: 0x4106 Manufacturer: Broadcom Corporation (15) ``` Signed-off-by: Mohammad Rasim <mohammad.rasim96@gmail.com> --- drivers/bluetooth/btbcm.c | 1 + drivers/bluetooth/hci_bcm.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c index 0bb9023ec214..689c7f36fea2 100644 --- a/drivers/bluetooth/btbcm.c +++ b/drivers/bluetooth/btbcm.c @@ -342,6 +342,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = { { 0x220e, "BCM20702A1" }, /* 001.002.014 */ { 0x4217, "BCM4329B1" }, /* 002.002.023 */ { 0x6106, "BCM4359C0" }, /* 003.001.006 */ + { 0x4106, "BCM4335A0" }, /* 002.001.006 */ { } }; diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c index 0f851c0dde7f..d2a6a4afdbbb 100644 --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -1425,6 +1425,7 @@ static const struct of_device_id bcm_bluetooth_of_match[] = { { .compatible = "brcm,bcm4330-bt" }, { .compatible = "brcm,bcm43438-bt" }, { .compatible = "brcm,bcm43540-bt" }, + { .compatible = "brcm,bcm4335a0" }, { }, }; MODULE_DEVICE_TABLE(of, bcm_bluetooth_of_match); -- 2.17.1 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-11-20 11:02 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <20191120110235.13987-1-mohammad.rasim96@gmail.com> 2019-11-20 11:02 ` [PATCH v2 1/2] dt-bindings: net: Add compatible for BCM4335A0 bluetooth Mohammad Rasim 2019-11-20 11:02 ` Mohammad Rasim 2019-11-21 7:11 ` Marcel Holtmann 2019-11-21 7:11 ` Marcel Holtmann 2019-11-20 11:02 ` Mohammad Rasim [this message] 2019-11-20 11:02 ` [PATCH v2 2/2] Bluetooth: btbcm: Add entry for BCM4335A0 UART bluetooth Mohammad Rasim 2019-11-21 7:12 ` Marcel Holtmann 2019-11-21 7:12 ` Marcel Holtmann
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191120110235.13987-3-mohammad.rasim96@gmail.com \ --to=mohammad.rasim96@gmail.com \ --cc=johan.hedberg@gmail.com \ --cc=linux-amlogic@lists.infradead.org \ --cc=linux-bluetooth@vger.kernel.org \ --cc=marcel@holtmann.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.