From: Stephan Gerhold <stephan@gerhold.net> To: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Stephan Gerhold <stephan@gerhold.net> Subject: [PATCH 1/5] ARM: dts: ux500: Move generic pin configs out of ste-href-family-pinctrl.dtsi Date: Mon, 25 Nov 2019 13:22:52 +0100 [thread overview] Message-ID: <20191125122256.53482-1-stephan@gerhold.net> (raw) All existing Ux500 boards make use of ste-href-family-pinctrl.dtsi, which contains shared pin configurations for UART, I2C and SDI. Most of these can be also used for devices not based on HREF. Move the generic pin configs into a new device tree include "ste-dbx5x0-pinctrl.dtsi". There is no functional change (yet), as a next step we will rename the pin configs to use more generic names. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | 529 +++++++++++++++++ .../arm/boot/dts/ste-href-family-pinctrl.dtsi | 532 +----------------- 2 files changed, 530 insertions(+), 531 deletions(-) create mode 100644 arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi new file mode 100644 index 000000000000..fbc41cacf690 --- /dev/null +++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi @@ -0,0 +1,529 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Linaro Ltd. + */ + +#include "ste-nomadik-pinctrl.dtsi" + +&pinctrl { + /* Settings for all UART default and sleep states */ + uart0 { + uart0_default_mode: uart0_default { + default_mux { + function = "u0"; + groups = "u0_a_1"; + }; + default_cfg1 { + pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ + ste,config = <&out_hi>; + }; + }; + + uart0_sleep_mode: uart0_sleep { + sleep_cfg1 { + pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO1_AJ3"; /* RTS */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg3 { + pins = "GPIO3_AH3"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + + uart1 { + uart1_default_mode: uart1_default { + default_mux { + function = "u1"; + groups = "u1rxtx_a_1"; + }; + default_cfg1 { + pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + uart1_sleep_mode: uart1_sleep { + sleep_cfg1 { + pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + + uart2 { + uart2_default_mode: uart2_default { + default_mux { + function = "u2"; + groups = "u2rxtx_c_1"; + }; + default_cfg1 { + pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + uart2_sleep_mode: uart2_sleep { + sleep_cfg1 { + pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_wkup_pdis>; + }; + }; + }; + + /* Settings for all I2C default and sleep states */ + i2c0 { + i2c0_default_mode: i2c_default { + default_mux { + function = "i2c0"; + groups = "i2c0_a_1"; + }; + default_cfg1 { + pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c0_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c1 { + i2c1_default_mode: i2c_default { + default_mux { + function = "i2c1"; + groups = "i2c1_b_2"; + }; + default_cfg1 { + pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c1_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c2 { + i2c2_default_mode: i2c_default { + default_mux { + function = "i2c2"; + groups = "i2c2_b_2"; + }; + default_cfg1 { + pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c2_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c3 { + i2c3_default_mode: i2c_default { + default_mux { + function = "i2c3"; + groups = "i2c3_c_2"; + }; + default_cfg1 { + pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c3_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* + * Activating I2C4 will conflict with UART1 about the same pins so do not + * enable I2C4 and UART1 at the same time. + */ + i2c4 { + i2c4_default_mode: i2c_default { + default_mux { + function = "i2c4"; + groups = "i2c4_b_1"; + }; + default_cfg1 { + pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c4_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* Settings for all MMC/SD/SDIO default and sleep states */ + sdi0 { + /* This is the external SD card slot, 4 bits wide */ + sdi0_default_mode: sdi0_default { + default_mux { + function = "mc0"; + groups = "mc0_a_1"; + }; + default_cfg1 { + pins = + "GPIO18_AC2", /* CMDDIR */ + "GPIO19_AC1", /* DAT0DIR */ + "GPIO20_AB4"; /* DAT2DIR */ + ste,config = <&out_hi>; + }; + default_cfg2 { + pins = "GPIO22_AA3"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg4 { + pins = + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + sdi0_sleep_mode: sdi0_sleep { + sleep_cfg1 { + pins = + "GPIO18_AC2", /* CMDDIR */ + "GPIO19_AC1", /* DAT0DIR */ + "GPIO20_AB4"; /* DAT2DIR */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO22_AA3", /* FBCLK */ + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg3 { + pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + }; + }; + + sdi1 { + /* This is the WLAN SDIO 4 bits wide */ + sdi1_default_mode: sdi1_default { + default_mux { + function = "mc1"; + groups = "mc1_a_1"; + }; + default_cfg1 { + pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = "GPIO209_AG15"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + sdi1_sleep_mode: sdi1_sleep { + sleep_cfg1 { + pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO209_AG15", /* FBCLK */ + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + sdi2 { + /* This is the eMMC 8 bits wide, usually PoP eMMC */ + sdi2_default_mode: sdi2_default { + default_mux { + function = "mc2"; + groups = "mc2_a_1"; + }; + default_cfg1 { + pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = "GPIO130_C8"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = + "GPIO129_B4", /* CMD */ + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + + sdi2_sleep_mode: sdi2_sleep { + sleep_cfg1 { + pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO130_C8", /* FBCLK */ + "GPIO129_B4"; /* CMD */ + ste,config = <&in_wkup_pdis_en>; + }; + sleep_cfg3 { + pins = + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_wkup_pdis>; + }; + }; + }; + + sdi4 { + /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */ + sdi4_default_mode: sdi4_default { + default_mux { + function = "mc4"; + groups = "mc4_a_1"; + }; + default_cfg1 { + pins = "GPIO203_AE23"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = "GPIO202_AF25"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = + "GPIO201_AF24", /* CMD */ + "GPIO200_AH26", /* DAT0 */ + "GPIO199_AH23", /* DAT1 */ + "GPIO198_AG25", /* DAT2 */ + "GPIO197_AH24", /* DAT3 */ + "GPIO207_AJ23", /* DAT4 */ + "GPIO206_AG24", /* DAT5 */ + "GPIO205_AG23", /* DAT6 */ + "GPIO204_AF23"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + + sdi4_sleep_mode: sdi4_sleep { + sleep_cfg1 { + pins = "GPIO203_AE23"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO202_AF25", /* FBCLK */ + "GPIO201_AF24", /* CMD */ + "GPIO200_AH26", /* DAT0 */ + "GPIO199_AH23", /* DAT1 */ + "GPIO198_AG25", /* DAT2 */ + "GPIO197_AH24", /* DAT3 */ + "GPIO207_AJ23", /* DAT4 */ + "GPIO206_AG24", /* DAT5 */ + "GPIO205_AG23", /* DAT6 */ + "GPIO204_AF23"; /* DAT7 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* + * Multi-rate serial ports (MSPs) - MSP3 output is internal and + * cannot be muxed onto any pins. + */ + msp0 { + msp0_default_mode: msp0_default { + default_msp0_mux { + function = "msp0"; + groups = "msp0txrx_a_1", "msp0tfstck_a_1"; + }; + default_msp0_cfg { + pins = + "GPIO12_AC4", /* TXD */ + "GPIO15_AC3", /* RXD */ + "GPIO13_AF3", /* TFS */ + "GPIO14_AE3"; /* TCK */ + ste,config = <&in_nopull>; + }; + }; + }; + + msp1 { + msp1_default_mode: msp1_default { + default_mux { + function = "msp1"; + groups = "msp1txrx_a_1", "msp1_a_1"; + }; + default_cfg1 { + pins = "GPIO33_AF2"; + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = + "GPIO34_AE1", + "GPIO35_AE2", + "GPIO36_AG2"; + ste,config = <&in_nopull>; + }; + }; + }; + + msp2 { + msp2_default_mode: msp2_default { + /* MSP2 usually used for HDMI audio */ + default_mux { + function = "msp2"; + groups = "msp2_a_1"; + }; + default_cfg1 { + pins = + "GPIO193_AH27", /* TXD */ + "GPIO194_AF27", /* TCK */ + "GPIO195_AG28"; /* TFS */ + ste,config = <&in_pd>; + }; + default_cfg2 { + pins = "GPIO196_AG26"; /* RXD */ + ste,config = <&out_lo>; + }; + }; + }; + + musb { + musb_default_mode: musb_default { + default_mux { + function = "usb"; + groups = "usb_a_1"; + }; + default_cfg1 { + pins = + "GPIO256_AF28", /* NXT */ + "GPIO258_AD29", /* XCLK */ + "GPIO259_AC29", /* DIR */ + "GPIO260_AD28", /* DAT7 */ + "GPIO261_AD26", /* DAT6 */ + "GPIO262_AE26", /* DAT5 */ + "GPIO263_AG29", /* DAT4 */ + "GPIO264_AE27", /* DAT3 */ + "GPIO265_AD27", /* DAT2 */ + "GPIO266_AC28", /* DAT1 */ + "GPIO267_AC27"; /* DAT0 */ + ste,config = <&in_nopull>; + }; + default_cfg2 { + pins = "GPIO257_AE29"; /* STP */ + ste,config = <&out_hi>; + }; + }; + + musb_sleep_mode: musb_sleep { + sleep_cfg1 { + pins = + "GPIO256_AF28", /* NXT */ + "GPIO258_AD29", /* XCLK */ + "GPIO259_AC29"; /* DIR */ + ste,config = <&slpm_wkup_pdis_en>; + }; + sleep_cfg2 { + pins = "GPIO257_AE29"; /* STP */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg3 { + pins = + "GPIO260_AD28", /* DAT7 */ + "GPIO261_AD26", /* DAT6 */ + "GPIO262_AE26", /* DAT5 */ + "GPIO263_AG29", /* DAT4 */ + "GPIO264_AE27", /* DAT3 */ + "GPIO265_AD27", /* DAT2 */ + "GPIO266_AC28", /* DAT1 */ + "GPIO267_AC27"; /* DAT0 */ + ste,config = <&slpm_in_wkup_pdis_en>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi index 2c382d274ff6..434fa6baf71f 100644 --- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi @@ -3,212 +3,11 @@ * Copyright 2013 Linaro Ltd. */ -#include "ste-nomadik-pinctrl.dtsi" +#include "ste-dbx5x0-pinctrl.dtsi" / { soc { pinctrl { - /* Settings for all UART default and sleep states */ - uart0 { - uart0_default_mode: uart0_default { - default_mux { - function = "u0"; - groups = "u0_a_1"; - }; - default_cfg1 { - pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ - ste,config = <&in_pu>; - }; - - default_cfg2 { - pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ - ste,config = <&out_hi>; - }; - }; - - uart0_sleep_mode: uart0_sleep { - sleep_cfg1 { - pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ - ste,config = <&slpm_in_wkup_pdis>; - }; - - sleep_cfg2 { - pins = "GPIO1_AJ3"; /* RTS */ - ste,config = <&slpm_out_hi_wkup_pdis>; - }; - - sleep_cfg3 { - pins = "GPIO3_AH3"; /* TXD */ - ste,config = <&slpm_out_wkup_pdis>; - }; - }; - }; - - uart1 { - uart1_default_mode: uart1_default { - default_mux { - function = "u1"; - groups = "u1rxtx_a_1"; - }; - default_cfg1 { - pins = "GPIO4_AH6"; /* RXD */ - ste,config = <&in_pu>; - }; - - default_cfg2 { - pins = "GPIO5_AG6"; /* TXD */ - ste,config = <&out_hi>; - }; - }; - - uart1_sleep_mode: uart1_sleep { - sleep_cfg1 { - pins = "GPIO4_AH6"; /* RXD */ - ste,config = <&slpm_in_wkup_pdis>; - }; - - sleep_cfg2 { - pins = "GPIO5_AG6"; /* TXD */ - ste,config = <&slpm_out_wkup_pdis>; - }; - }; - }; - - uart2 { - uart2_default_mode: uart2_default { - default_mux { - function = "u2"; - groups = "u2rxtx_c_1"; - }; - default_cfg1 { - pins = "GPIO29_W2"; /* RXD */ - ste,config = <&in_pu>; - }; - - default_cfg2 { - pins = "GPIO30_W3"; /* TXD */ - ste,config = <&out_hi>; - }; - }; - - uart2_sleep_mode: uart2_sleep { - sleep_cfg1 { - pins = "GPIO29_W2"; /* RXD */ - ste,config = <&in_wkup_pdis>; - }; - - sleep_cfg2 { - pins = "GPIO30_W3"; /* TXD */ - ste,config = <&out_wkup_pdis>; - }; - }; - }; - - /* Settings for all I2C default and sleep states */ - i2c0 { - i2c0_default_mode: i2c_default { - default_mux { - function = "i2c0"; - groups = "i2c0_a_1"; - }; - default_cfg1 { - pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c0_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - i2c1 { - i2c1_default_mode: i2c_default { - default_mux { - function = "i2c1"; - groups = "i2c1_b_2"; - }; - default_cfg1 { - pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c1_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - i2c2 { - i2c2_default_mode: i2c_default { - default_mux { - function = "i2c2"; - groups = "i2c2_b_2"; - }; - default_cfg1 { - pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c2_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - i2c3 { - i2c3_default_mode: i2c_default { - default_mux { - function = "i2c3"; - groups = "i2c3_c_2"; - }; - default_cfg1 { - pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c3_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - /* - * Activating I2C4 will conflict with UART1 about the same pins so do not - * enable I2C4 and UART1 at the same time. - */ - i2c4 { - i2c4_default_mode: i2c_default { - default_mux { - function = "i2c4"; - groups = "i2c4_b_1"; - }; - default_cfg1 { - pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c4_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - /* Settings for all SPI default and sleep states */ spi2 { spi2_default_mode: spi_default { @@ -270,335 +69,6 @@ }; }; - /* Settings for all MMC/SD/SDIO default and sleep states */ - sdi0 { - /* This is the external SD card slot, 4 bits wide */ - sdi0_default_mode: sdi0_default { - default_mux { - function = "mc0"; - groups = "mc0_a_1"; - }; - default_cfg1 { - pins = - "GPIO18_AC2", /* CMDDIR */ - "GPIO19_AC1", /* DAT0DIR */ - "GPIO20_AB4"; /* DAT2DIR */ - ste,config = <&out_hi>; - }; - default_cfg2 { - pins = "GPIO22_AA3"; /* FBCLK */ - ste,config = <&in_nopull>; - }; - default_cfg3 { - pins = "GPIO23_AA4"; /* CLK */ - ste,config = <&out_lo>; - }; - default_cfg4 { - pins = - "GPIO24_AB2", /* CMD */ - "GPIO25_Y4", /* DAT0 */ - "GPIO26_Y2", /* DAT1 */ - "GPIO27_AA2", /* DAT2 */ - "GPIO28_AA1"; /* DAT3 */ - ste,config = <&in_pu>; - }; - }; - - sdi0_sleep_mode: sdi0_sleep { - sleep_cfg1 { - pins = - "GPIO18_AC2", /* CMDDIR */ - "GPIO19_AC1", /* DAT0DIR */ - "GPIO20_AB4"; /* DAT2DIR */ - ste,config = <&slpm_out_hi_wkup_pdis>; - }; - sleep_cfg2 { - pins = - "GPIO22_AA3", /* FBCLK */ - "GPIO24_AB2", /* CMD */ - "GPIO25_Y4", /* DAT0 */ - "GPIO26_Y2", /* DAT1 */ - "GPIO27_AA2", /* DAT2 */ - "GPIO28_AA1"; /* DAT3 */ - ste,config = <&slpm_in_wkup_pdis>; - }; - sleep_cfg3 { - pins = "GPIO23_AA4"; /* CLK */ - ste,config = <&slpm_out_lo_wkup_pdis>; - }; - }; - }; - - sdi1 { - /* This is the WLAN SDIO 4 bits wide */ - sdi1_default_mode: sdi1_default { - default_mux { - function = "mc1"; - groups = "mc1_a_1"; - }; - default_cfg1 { - pins = "GPIO208_AH16"; /* CLK */ - ste,config = <&out_lo>; - }; - default_cfg2 { - pins = "GPIO209_AG15"; /* FBCLK */ - ste,config = <&in_nopull>; - }; - default_cfg3 { - pins = - "GPIO210_AJ15", /* CMD */ - "GPIO211_AG14", /* DAT0 */ - "GPIO212_AF13", /* DAT1 */ - "GPIO213_AG13", /* DAT2 */ - "GPIO214_AH15"; /* DAT3 */ - ste,config = <&in_pu>; - }; - }; - - sdi1_sleep_mode: sdi1_sleep { - sleep_cfg1 { - pins = "GPIO208_AH16"; /* CLK */ - ste,config = <&slpm_out_lo_wkup_pdis>; - }; - sleep_cfg2 { - pins = - "GPIO209_AG15", /* FBCLK */ - "GPIO210_AJ15", /* CMD */ - "GPIO211_AG14", /* DAT0 */ - "GPIO212_AF13", /* DAT1 */ - "GPIO213_AG13", /* DAT2 */ - "GPIO214_AH15"; /* DAT3 */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - sdi2 { - /* This is the eMMC 8 bits wide, usually PoP eMMC */ - sdi2_default_mode: sdi2_default { - default_mux { - function = "mc2"; - groups = "mc2_a_1"; - }; - default_cfg1 { - pins = "GPIO128_A5"; /* CLK */ - ste,config = <&out_lo>; - }; - default_cfg2 { - pins = "GPIO130_C8"; /* FBCLK */ - ste,config = <&in_nopull>; - }; - default_cfg3 { - pins = - "GPIO129_B4", /* CMD */ - "GPIO131_A12", /* DAT0 */ - "GPIO132_C10", /* DAT1 */ - "GPIO133_B10", /* DAT2 */ - "GPIO134_B9", /* DAT3 */ - "GPIO135_A9", /* DAT4 */ - "GPIO136_C7", /* DAT5 */ - "GPIO137_A7", /* DAT6 */ - "GPIO138_C5"; /* DAT7 */ - ste,config = <&in_pu>; - }; - }; - - sdi2_sleep_mode: sdi2_sleep { - sleep_cfg1 { - pins = "GPIO128_A5"; /* CLK */ - ste,config = <&out_lo_wkup_pdis>; - }; - sleep_cfg2 { - pins = - "GPIO130_C8", /* FBCLK */ - "GPIO129_B4"; /* CMD */ - ste,config = <&in_wkup_pdis_en>; - }; - sleep_cfg3 { - pins = - "GPIO131_A12", /* DAT0 */ - "GPIO132_C10", /* DAT1 */ - "GPIO133_B10", /* DAT2 */ - "GPIO134_B9", /* DAT3 */ - "GPIO135_A9", /* DAT4 */ - "GPIO136_C7", /* DAT5 */ - "GPIO137_A7", /* DAT6 */ - "GPIO138_C5"; /* DAT7 */ - ste,config = <&in_wkup_pdis>; - }; - }; - }; - - sdi4 { - /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */ - sdi4_default_mode: sdi4_default { - default_mux { - function = "mc4"; - groups = "mc4_a_1"; - }; - default_cfg1 { - pins = "GPIO203_AE23"; /* CLK */ - ste,config = <&out_lo>; - }; - default_cfg2 { - pins = "GPIO202_AF25"; /* FBCLK */ - ste,config = <&in_nopull>; - }; - default_cfg3 { - pins = - "GPIO201_AF24", /* CMD */ - "GPIO200_AH26", /* DAT0 */ - "GPIO199_AH23", /* DAT1 */ - "GPIO198_AG25", /* DAT2 */ - "GPIO197_AH24", /* DAT3 */ - "GPIO207_AJ23", /* DAT4 */ - "GPIO206_AG24", /* DAT5 */ - "GPIO205_AG23", /* DAT6 */ - "GPIO204_AF23"; /* DAT7 */ - ste,config = <&in_pu>; - }; - }; - - sdi4_sleep_mode: sdi4_sleep { - sleep_cfg1 { - pins = "GPIO203_AE23"; /* CLK */ - ste,config = <&out_lo_wkup_pdis>; - }; - sleep_cfg2 { - pins = - "GPIO202_AF25", /* FBCLK */ - "GPIO201_AF24", /* CMD */ - "GPIO200_AH26", /* DAT0 */ - "GPIO199_AH23", /* DAT1 */ - "GPIO198_AG25", /* DAT2 */ - "GPIO197_AH24", /* DAT3 */ - "GPIO207_AJ23", /* DAT4 */ - "GPIO206_AG24", /* DAT5 */ - "GPIO205_AG23", /* DAT6 */ - "GPIO204_AF23"; /* DAT7 */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - /* - * Multi-rate serial ports (MSPs) - MSP3 output is internal and - * cannot be muxed onto any pins. - */ - msp0 { - msp0_default_mode: msp0_default { - default_msp0_mux { - function = "msp0"; - groups = "msp0txrx_a_1", "msp0tfstck_a_1"; - }; - default_msp0_cfg { - pins = - "GPIO12_AC4", /* TXD */ - "GPIO15_AC3", /* RXD */ - "GPIO13_AF3", /* TFS */ - "GPIO14_AE3"; /* TCK */ - ste,config = <&in_nopull>; - }; - }; - }; - - msp1 { - msp1_default_mode: msp1_default { - default_mux { - function = "msp1"; - groups = "msp1txrx_a_1", "msp1_a_1"; - }; - default_cfg1 { - pins = "GPIO33_AF2"; - ste,config = <&out_lo>; - }; - default_cfg2 { - pins = - "GPIO34_AE1", - "GPIO35_AE2", - "GPIO36_AG2"; - ste,config = <&in_nopull>; - }; - - }; - }; - - msp2 { - msp2_default_mode: msp2_default { - /* MSP2 usually used for HDMI audio */ - default_mux { - function = "msp2"; - groups = "msp2_a_1"; - }; - default_cfg1 { - pins = - "GPIO193_AH27", /* TXD */ - "GPIO194_AF27", /* TCK */ - "GPIO195_AG28"; /* TFS */ - ste,config = <&in_pd>; - }; - default_cfg2 { - pins = "GPIO196_AG26"; /* RXD */ - ste,config = <&out_lo>; - }; - }; - }; - - - musb { - musb_default_mode: musb_default { - default_mux { - function = "usb"; - groups = "usb_a_1"; - }; - default_cfg1 { - pins = - "GPIO256_AF28", /* NXT */ - "GPIO258_AD29", /* XCLK */ - "GPIO259_AC29", /* DIR */ - "GPIO260_AD28", /* DAT7 */ - "GPIO261_AD26", /* DAT6 */ - "GPIO262_AE26", /* DAT5 */ - "GPIO263_AG29", /* DAT4 */ - "GPIO264_AE27", /* DAT3 */ - "GPIO265_AD27", /* DAT2 */ - "GPIO266_AC28", /* DAT1 */ - "GPIO267_AC27"; /* DAT0 */ - ste,config = <&in_nopull>; - }; - default_cfg2 { - pins = "GPIO257_AE29"; /* STP */ - ste,config = <&out_hi>; - }; - }; - - musb_sleep_mode: musb_sleep { - sleep_cfg1 { - pins = - "GPIO256_AF28", /* NXT */ - "GPIO258_AD29", /* XCLK */ - "GPIO259_AC29"; /* DIR */ - ste,config = <&slpm_wkup_pdis_en>; - }; - sleep_cfg2 { - pins = "GPIO257_AE29"; /* STP */ - ste,config = <&slpm_out_hi_wkup_pdis>; - }; - sleep_cfg3 { - pins = - "GPIO260_AD28", /* DAT7 */ - "GPIO261_AD26", /* DAT6 */ - "GPIO262_AE26", /* DAT5 */ - "GPIO263_AG29", /* DAT4 */ - "GPIO264_AE27", /* DAT3 */ - "GPIO265_AD27", /* DAT2 */ - "GPIO266_AC28", /* DAT1 */ - "GPIO267_AC27"; /* DAT0 */ - ste,config = <&slpm_in_wkup_pdis_en>; - }; - }; - }; - mcde { lcd_default_mode: lcd_default { default_mux1 { -- 2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Stephan Gerhold <stephan@gerhold.net> To: Linus Walleij <linus.walleij@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Stephan Gerhold <stephan@gerhold.net>, linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/5] ARM: dts: ux500: Move generic pin configs out of ste-href-family-pinctrl.dtsi Date: Mon, 25 Nov 2019 13:22:52 +0100 [thread overview] Message-ID: <20191125122256.53482-1-stephan@gerhold.net> (raw) All existing Ux500 boards make use of ste-href-family-pinctrl.dtsi, which contains shared pin configurations for UART, I2C and SDI. Most of these can be also used for devices not based on HREF. Move the generic pin configs into a new device tree include "ste-dbx5x0-pinctrl.dtsi". There is no functional change (yet), as a next step we will rename the pin configs to use more generic names. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi | 529 +++++++++++++++++ .../arm/boot/dts/ste-href-family-pinctrl.dtsi | 532 +----------------- 2 files changed, 530 insertions(+), 531 deletions(-) create mode 100644 arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi diff --git a/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi new file mode 100644 index 000000000000..fbc41cacf690 --- /dev/null +++ b/arch/arm/boot/dts/ste-dbx5x0-pinctrl.dtsi @@ -0,0 +1,529 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Linaro Ltd. + */ + +#include "ste-nomadik-pinctrl.dtsi" + +&pinctrl { + /* Settings for all UART default and sleep states */ + uart0 { + uart0_default_mode: uart0_default { + default_mux { + function = "u0"; + groups = "u0_a_1"; + }; + default_cfg1 { + pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ + ste,config = <&out_hi>; + }; + }; + + uart0_sleep_mode: uart0_sleep { + sleep_cfg1 { + pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO1_AJ3"; /* RTS */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg3 { + pins = "GPIO3_AH3"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + + uart1 { + uart1_default_mode: uart1_default { + default_mux { + function = "u1"; + groups = "u1rxtx_a_1"; + }; + default_cfg1 { + pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + uart1_sleep_mode: uart1_sleep { + sleep_cfg1 { + pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + + uart2 { + uart2_default_mode: uart2_default { + default_mux { + function = "u2"; + groups = "u2rxtx_c_1"; + }; + default_cfg1 { + pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_pu>; + }; + default_cfg2 { + pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + uart2_sleep_mode: uart2_sleep { + sleep_cfg1 { + pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_wkup_pdis>; + }; + sleep_cfg2 { + pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_wkup_pdis>; + }; + }; + }; + + /* Settings for all I2C default and sleep states */ + i2c0 { + i2c0_default_mode: i2c_default { + default_mux { + function = "i2c0"; + groups = "i2c0_a_1"; + }; + default_cfg1 { + pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c0_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c1 { + i2c1_default_mode: i2c_default { + default_mux { + function = "i2c1"; + groups = "i2c1_b_2"; + }; + default_cfg1 { + pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c1_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c2 { + i2c2_default_mode: i2c_default { + default_mux { + function = "i2c2"; + groups = "i2c2_b_2"; + }; + default_cfg1 { + pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c2_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c3 { + i2c3_default_mode: i2c_default { + default_mux { + function = "i2c3"; + groups = "i2c3_c_2"; + }; + default_cfg1 { + pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c3_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* + * Activating I2C4 will conflict with UART1 about the same pins so do not + * enable I2C4 and UART1 at the same time. + */ + i2c4 { + i2c4_default_mode: i2c_default { + default_mux { + function = "i2c4"; + groups = "i2c4_b_1"; + }; + default_cfg1 { + pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c4_sleep_mode: i2c_sleep { + sleep_cfg1 { + pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* Settings for all MMC/SD/SDIO default and sleep states */ + sdi0 { + /* This is the external SD card slot, 4 bits wide */ + sdi0_default_mode: sdi0_default { + default_mux { + function = "mc0"; + groups = "mc0_a_1"; + }; + default_cfg1 { + pins = + "GPIO18_AC2", /* CMDDIR */ + "GPIO19_AC1", /* DAT0DIR */ + "GPIO20_AB4"; /* DAT2DIR */ + ste,config = <&out_hi>; + }; + default_cfg2 { + pins = "GPIO22_AA3"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg4 { + pins = + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + sdi0_sleep_mode: sdi0_sleep { + sleep_cfg1 { + pins = + "GPIO18_AC2", /* CMDDIR */ + "GPIO19_AC1", /* DAT0DIR */ + "GPIO20_AB4"; /* DAT2DIR */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO22_AA3", /* FBCLK */ + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg3 { + pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + }; + }; + + sdi1 { + /* This is the WLAN SDIO 4 bits wide */ + sdi1_default_mode: sdi1_default { + default_mux { + function = "mc1"; + groups = "mc1_a_1"; + }; + default_cfg1 { + pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = "GPIO209_AG15"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + sdi1_sleep_mode: sdi1_sleep { + sleep_cfg1 { + pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO209_AG15", /* FBCLK */ + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + sdi2 { + /* This is the eMMC 8 bits wide, usually PoP eMMC */ + sdi2_default_mode: sdi2_default { + default_mux { + function = "mc2"; + groups = "mc2_a_1"; + }; + default_cfg1 { + pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = "GPIO130_C8"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = + "GPIO129_B4", /* CMD */ + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + + sdi2_sleep_mode: sdi2_sleep { + sleep_cfg1 { + pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO130_C8", /* FBCLK */ + "GPIO129_B4"; /* CMD */ + ste,config = <&in_wkup_pdis_en>; + }; + sleep_cfg3 { + pins = + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_wkup_pdis>; + }; + }; + }; + + sdi4 { + /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */ + sdi4_default_mode: sdi4_default { + default_mux { + function = "mc4"; + groups = "mc4_a_1"; + }; + default_cfg1 { + pins = "GPIO203_AE23"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = "GPIO202_AF25"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + pins = + "GPIO201_AF24", /* CMD */ + "GPIO200_AH26", /* DAT0 */ + "GPIO199_AH23", /* DAT1 */ + "GPIO198_AG25", /* DAT2 */ + "GPIO197_AH24", /* DAT3 */ + "GPIO207_AJ23", /* DAT4 */ + "GPIO206_AG24", /* DAT5 */ + "GPIO205_AG23", /* DAT6 */ + "GPIO204_AF23"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + + sdi4_sleep_mode: sdi4_sleep { + sleep_cfg1 { + pins = "GPIO203_AE23"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + pins = + "GPIO202_AF25", /* FBCLK */ + "GPIO201_AF24", /* CMD */ + "GPIO200_AH26", /* DAT0 */ + "GPIO199_AH23", /* DAT1 */ + "GPIO198_AG25", /* DAT2 */ + "GPIO197_AH24", /* DAT3 */ + "GPIO207_AJ23", /* DAT4 */ + "GPIO206_AG24", /* DAT5 */ + "GPIO205_AG23", /* DAT6 */ + "GPIO204_AF23"; /* DAT7 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* + * Multi-rate serial ports (MSPs) - MSP3 output is internal and + * cannot be muxed onto any pins. + */ + msp0 { + msp0_default_mode: msp0_default { + default_msp0_mux { + function = "msp0"; + groups = "msp0txrx_a_1", "msp0tfstck_a_1"; + }; + default_msp0_cfg { + pins = + "GPIO12_AC4", /* TXD */ + "GPIO15_AC3", /* RXD */ + "GPIO13_AF3", /* TFS */ + "GPIO14_AE3"; /* TCK */ + ste,config = <&in_nopull>; + }; + }; + }; + + msp1 { + msp1_default_mode: msp1_default { + default_mux { + function = "msp1"; + groups = "msp1txrx_a_1", "msp1_a_1"; + }; + default_cfg1 { + pins = "GPIO33_AF2"; + ste,config = <&out_lo>; + }; + default_cfg2 { + pins = + "GPIO34_AE1", + "GPIO35_AE2", + "GPIO36_AG2"; + ste,config = <&in_nopull>; + }; + }; + }; + + msp2 { + msp2_default_mode: msp2_default { + /* MSP2 usually used for HDMI audio */ + default_mux { + function = "msp2"; + groups = "msp2_a_1"; + }; + default_cfg1 { + pins = + "GPIO193_AH27", /* TXD */ + "GPIO194_AF27", /* TCK */ + "GPIO195_AG28"; /* TFS */ + ste,config = <&in_pd>; + }; + default_cfg2 { + pins = "GPIO196_AG26"; /* RXD */ + ste,config = <&out_lo>; + }; + }; + }; + + musb { + musb_default_mode: musb_default { + default_mux { + function = "usb"; + groups = "usb_a_1"; + }; + default_cfg1 { + pins = + "GPIO256_AF28", /* NXT */ + "GPIO258_AD29", /* XCLK */ + "GPIO259_AC29", /* DIR */ + "GPIO260_AD28", /* DAT7 */ + "GPIO261_AD26", /* DAT6 */ + "GPIO262_AE26", /* DAT5 */ + "GPIO263_AG29", /* DAT4 */ + "GPIO264_AE27", /* DAT3 */ + "GPIO265_AD27", /* DAT2 */ + "GPIO266_AC28", /* DAT1 */ + "GPIO267_AC27"; /* DAT0 */ + ste,config = <&in_nopull>; + }; + default_cfg2 { + pins = "GPIO257_AE29"; /* STP */ + ste,config = <&out_hi>; + }; + }; + + musb_sleep_mode: musb_sleep { + sleep_cfg1 { + pins = + "GPIO256_AF28", /* NXT */ + "GPIO258_AD29", /* XCLK */ + "GPIO259_AC29"; /* DIR */ + ste,config = <&slpm_wkup_pdis_en>; + }; + sleep_cfg2 { + pins = "GPIO257_AE29"; /* STP */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg3 { + pins = + "GPIO260_AD28", /* DAT7 */ + "GPIO261_AD26", /* DAT6 */ + "GPIO262_AE26", /* DAT5 */ + "GPIO263_AG29", /* DAT4 */ + "GPIO264_AE27", /* DAT3 */ + "GPIO265_AD27", /* DAT2 */ + "GPIO266_AC28", /* DAT1 */ + "GPIO267_AC27"; /* DAT0 */ + ste,config = <&slpm_in_wkup_pdis_en>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi index 2c382d274ff6..434fa6baf71f 100644 --- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi @@ -3,212 +3,11 @@ * Copyright 2013 Linaro Ltd. */ -#include "ste-nomadik-pinctrl.dtsi" +#include "ste-dbx5x0-pinctrl.dtsi" / { soc { pinctrl { - /* Settings for all UART default and sleep states */ - uart0 { - uart0_default_mode: uart0_default { - default_mux { - function = "u0"; - groups = "u0_a_1"; - }; - default_cfg1 { - pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ - ste,config = <&in_pu>; - }; - - default_cfg2 { - pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ - ste,config = <&out_hi>; - }; - }; - - uart0_sleep_mode: uart0_sleep { - sleep_cfg1 { - pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ - ste,config = <&slpm_in_wkup_pdis>; - }; - - sleep_cfg2 { - pins = "GPIO1_AJ3"; /* RTS */ - ste,config = <&slpm_out_hi_wkup_pdis>; - }; - - sleep_cfg3 { - pins = "GPIO3_AH3"; /* TXD */ - ste,config = <&slpm_out_wkup_pdis>; - }; - }; - }; - - uart1 { - uart1_default_mode: uart1_default { - default_mux { - function = "u1"; - groups = "u1rxtx_a_1"; - }; - default_cfg1 { - pins = "GPIO4_AH6"; /* RXD */ - ste,config = <&in_pu>; - }; - - default_cfg2 { - pins = "GPIO5_AG6"; /* TXD */ - ste,config = <&out_hi>; - }; - }; - - uart1_sleep_mode: uart1_sleep { - sleep_cfg1 { - pins = "GPIO4_AH6"; /* RXD */ - ste,config = <&slpm_in_wkup_pdis>; - }; - - sleep_cfg2 { - pins = "GPIO5_AG6"; /* TXD */ - ste,config = <&slpm_out_wkup_pdis>; - }; - }; - }; - - uart2 { - uart2_default_mode: uart2_default { - default_mux { - function = "u2"; - groups = "u2rxtx_c_1"; - }; - default_cfg1 { - pins = "GPIO29_W2"; /* RXD */ - ste,config = <&in_pu>; - }; - - default_cfg2 { - pins = "GPIO30_W3"; /* TXD */ - ste,config = <&out_hi>; - }; - }; - - uart2_sleep_mode: uart2_sleep { - sleep_cfg1 { - pins = "GPIO29_W2"; /* RXD */ - ste,config = <&in_wkup_pdis>; - }; - - sleep_cfg2 { - pins = "GPIO30_W3"; /* TXD */ - ste,config = <&out_wkup_pdis>; - }; - }; - }; - - /* Settings for all I2C default and sleep states */ - i2c0 { - i2c0_default_mode: i2c_default { - default_mux { - function = "i2c0"; - groups = "i2c0_a_1"; - }; - default_cfg1 { - pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c0_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - i2c1 { - i2c1_default_mode: i2c_default { - default_mux { - function = "i2c1"; - groups = "i2c1_b_2"; - }; - default_cfg1 { - pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c1_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - i2c2 { - i2c2_default_mode: i2c_default { - default_mux { - function = "i2c2"; - groups = "i2c2_b_2"; - }; - default_cfg1 { - pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c2_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - i2c3 { - i2c3_default_mode: i2c_default { - default_mux { - function = "i2c3"; - groups = "i2c3_c_2"; - }; - default_cfg1 { - pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c3_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - /* - * Activating I2C4 will conflict with UART1 about the same pins so do not - * enable I2C4 and UART1 at the same time. - */ - i2c4 { - i2c4_default_mode: i2c_default { - default_mux { - function = "i2c4"; - groups = "i2c4_b_1"; - }; - default_cfg1 { - pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ - ste,config = <&in_pu>; - }; - }; - - i2c4_sleep_mode: i2c_sleep { - sleep_cfg1 { - pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - /* Settings for all SPI default and sleep states */ spi2 { spi2_default_mode: spi_default { @@ -270,335 +69,6 @@ }; }; - /* Settings for all MMC/SD/SDIO default and sleep states */ - sdi0 { - /* This is the external SD card slot, 4 bits wide */ - sdi0_default_mode: sdi0_default { - default_mux { - function = "mc0"; - groups = "mc0_a_1"; - }; - default_cfg1 { - pins = - "GPIO18_AC2", /* CMDDIR */ - "GPIO19_AC1", /* DAT0DIR */ - "GPIO20_AB4"; /* DAT2DIR */ - ste,config = <&out_hi>; - }; - default_cfg2 { - pins = "GPIO22_AA3"; /* FBCLK */ - ste,config = <&in_nopull>; - }; - default_cfg3 { - pins = "GPIO23_AA4"; /* CLK */ - ste,config = <&out_lo>; - }; - default_cfg4 { - pins = - "GPIO24_AB2", /* CMD */ - "GPIO25_Y4", /* DAT0 */ - "GPIO26_Y2", /* DAT1 */ - "GPIO27_AA2", /* DAT2 */ - "GPIO28_AA1"; /* DAT3 */ - ste,config = <&in_pu>; - }; - }; - - sdi0_sleep_mode: sdi0_sleep { - sleep_cfg1 { - pins = - "GPIO18_AC2", /* CMDDIR */ - "GPIO19_AC1", /* DAT0DIR */ - "GPIO20_AB4"; /* DAT2DIR */ - ste,config = <&slpm_out_hi_wkup_pdis>; - }; - sleep_cfg2 { - pins = - "GPIO22_AA3", /* FBCLK */ - "GPIO24_AB2", /* CMD */ - "GPIO25_Y4", /* DAT0 */ - "GPIO26_Y2", /* DAT1 */ - "GPIO27_AA2", /* DAT2 */ - "GPIO28_AA1"; /* DAT3 */ - ste,config = <&slpm_in_wkup_pdis>; - }; - sleep_cfg3 { - pins = "GPIO23_AA4"; /* CLK */ - ste,config = <&slpm_out_lo_wkup_pdis>; - }; - }; - }; - - sdi1 { - /* This is the WLAN SDIO 4 bits wide */ - sdi1_default_mode: sdi1_default { - default_mux { - function = "mc1"; - groups = "mc1_a_1"; - }; - default_cfg1 { - pins = "GPIO208_AH16"; /* CLK */ - ste,config = <&out_lo>; - }; - default_cfg2 { - pins = "GPIO209_AG15"; /* FBCLK */ - ste,config = <&in_nopull>; - }; - default_cfg3 { - pins = - "GPIO210_AJ15", /* CMD */ - "GPIO211_AG14", /* DAT0 */ - "GPIO212_AF13", /* DAT1 */ - "GPIO213_AG13", /* DAT2 */ - "GPIO214_AH15"; /* DAT3 */ - ste,config = <&in_pu>; - }; - }; - - sdi1_sleep_mode: sdi1_sleep { - sleep_cfg1 { - pins = "GPIO208_AH16"; /* CLK */ - ste,config = <&slpm_out_lo_wkup_pdis>; - }; - sleep_cfg2 { - pins = - "GPIO209_AG15", /* FBCLK */ - "GPIO210_AJ15", /* CMD */ - "GPIO211_AG14", /* DAT0 */ - "GPIO212_AF13", /* DAT1 */ - "GPIO213_AG13", /* DAT2 */ - "GPIO214_AH15"; /* DAT3 */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - sdi2 { - /* This is the eMMC 8 bits wide, usually PoP eMMC */ - sdi2_default_mode: sdi2_default { - default_mux { - function = "mc2"; - groups = "mc2_a_1"; - }; - default_cfg1 { - pins = "GPIO128_A5"; /* CLK */ - ste,config = <&out_lo>; - }; - default_cfg2 { - pins = "GPIO130_C8"; /* FBCLK */ - ste,config = <&in_nopull>; - }; - default_cfg3 { - pins = - "GPIO129_B4", /* CMD */ - "GPIO131_A12", /* DAT0 */ - "GPIO132_C10", /* DAT1 */ - "GPIO133_B10", /* DAT2 */ - "GPIO134_B9", /* DAT3 */ - "GPIO135_A9", /* DAT4 */ - "GPIO136_C7", /* DAT5 */ - "GPIO137_A7", /* DAT6 */ - "GPIO138_C5"; /* DAT7 */ - ste,config = <&in_pu>; - }; - }; - - sdi2_sleep_mode: sdi2_sleep { - sleep_cfg1 { - pins = "GPIO128_A5"; /* CLK */ - ste,config = <&out_lo_wkup_pdis>; - }; - sleep_cfg2 { - pins = - "GPIO130_C8", /* FBCLK */ - "GPIO129_B4"; /* CMD */ - ste,config = <&in_wkup_pdis_en>; - }; - sleep_cfg3 { - pins = - "GPIO131_A12", /* DAT0 */ - "GPIO132_C10", /* DAT1 */ - "GPIO133_B10", /* DAT2 */ - "GPIO134_B9", /* DAT3 */ - "GPIO135_A9", /* DAT4 */ - "GPIO136_C7", /* DAT5 */ - "GPIO137_A7", /* DAT6 */ - "GPIO138_C5"; /* DAT7 */ - ste,config = <&in_wkup_pdis>; - }; - }; - }; - - sdi4 { - /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */ - sdi4_default_mode: sdi4_default { - default_mux { - function = "mc4"; - groups = "mc4_a_1"; - }; - default_cfg1 { - pins = "GPIO203_AE23"; /* CLK */ - ste,config = <&out_lo>; - }; - default_cfg2 { - pins = "GPIO202_AF25"; /* FBCLK */ - ste,config = <&in_nopull>; - }; - default_cfg3 { - pins = - "GPIO201_AF24", /* CMD */ - "GPIO200_AH26", /* DAT0 */ - "GPIO199_AH23", /* DAT1 */ - "GPIO198_AG25", /* DAT2 */ - "GPIO197_AH24", /* DAT3 */ - "GPIO207_AJ23", /* DAT4 */ - "GPIO206_AG24", /* DAT5 */ - "GPIO205_AG23", /* DAT6 */ - "GPIO204_AF23"; /* DAT7 */ - ste,config = <&in_pu>; - }; - }; - - sdi4_sleep_mode: sdi4_sleep { - sleep_cfg1 { - pins = "GPIO203_AE23"; /* CLK */ - ste,config = <&out_lo_wkup_pdis>; - }; - sleep_cfg2 { - pins = - "GPIO202_AF25", /* FBCLK */ - "GPIO201_AF24", /* CMD */ - "GPIO200_AH26", /* DAT0 */ - "GPIO199_AH23", /* DAT1 */ - "GPIO198_AG25", /* DAT2 */ - "GPIO197_AH24", /* DAT3 */ - "GPIO207_AJ23", /* DAT4 */ - "GPIO206_AG24", /* DAT5 */ - "GPIO205_AG23", /* DAT6 */ - "GPIO204_AF23"; /* DAT7 */ - ste,config = <&slpm_in_wkup_pdis>; - }; - }; - }; - - /* - * Multi-rate serial ports (MSPs) - MSP3 output is internal and - * cannot be muxed onto any pins. - */ - msp0 { - msp0_default_mode: msp0_default { - default_msp0_mux { - function = "msp0"; - groups = "msp0txrx_a_1", "msp0tfstck_a_1"; - }; - default_msp0_cfg { - pins = - "GPIO12_AC4", /* TXD */ - "GPIO15_AC3", /* RXD */ - "GPIO13_AF3", /* TFS */ - "GPIO14_AE3"; /* TCK */ - ste,config = <&in_nopull>; - }; - }; - }; - - msp1 { - msp1_default_mode: msp1_default { - default_mux { - function = "msp1"; - groups = "msp1txrx_a_1", "msp1_a_1"; - }; - default_cfg1 { - pins = "GPIO33_AF2"; - ste,config = <&out_lo>; - }; - default_cfg2 { - pins = - "GPIO34_AE1", - "GPIO35_AE2", - "GPIO36_AG2"; - ste,config = <&in_nopull>; - }; - - }; - }; - - msp2 { - msp2_default_mode: msp2_default { - /* MSP2 usually used for HDMI audio */ - default_mux { - function = "msp2"; - groups = "msp2_a_1"; - }; - default_cfg1 { - pins = - "GPIO193_AH27", /* TXD */ - "GPIO194_AF27", /* TCK */ - "GPIO195_AG28"; /* TFS */ - ste,config = <&in_pd>; - }; - default_cfg2 { - pins = "GPIO196_AG26"; /* RXD */ - ste,config = <&out_lo>; - }; - }; - }; - - - musb { - musb_default_mode: musb_default { - default_mux { - function = "usb"; - groups = "usb_a_1"; - }; - default_cfg1 { - pins = - "GPIO256_AF28", /* NXT */ - "GPIO258_AD29", /* XCLK */ - "GPIO259_AC29", /* DIR */ - "GPIO260_AD28", /* DAT7 */ - "GPIO261_AD26", /* DAT6 */ - "GPIO262_AE26", /* DAT5 */ - "GPIO263_AG29", /* DAT4 */ - "GPIO264_AE27", /* DAT3 */ - "GPIO265_AD27", /* DAT2 */ - "GPIO266_AC28", /* DAT1 */ - "GPIO267_AC27"; /* DAT0 */ - ste,config = <&in_nopull>; - }; - default_cfg2 { - pins = "GPIO257_AE29"; /* STP */ - ste,config = <&out_hi>; - }; - }; - - musb_sleep_mode: musb_sleep { - sleep_cfg1 { - pins = - "GPIO256_AF28", /* NXT */ - "GPIO258_AD29", /* XCLK */ - "GPIO259_AC29"; /* DIR */ - ste,config = <&slpm_wkup_pdis_en>; - }; - sleep_cfg2 { - pins = "GPIO257_AE29"; /* STP */ - ste,config = <&slpm_out_hi_wkup_pdis>; - }; - sleep_cfg3 { - pins = - "GPIO260_AD28", /* DAT7 */ - "GPIO261_AD26", /* DAT6 */ - "GPIO262_AE26", /* DAT5 */ - "GPIO263_AG29", /* DAT4 */ - "GPIO264_AE27", /* DAT3 */ - "GPIO265_AD27", /* DAT2 */ - "GPIO266_AC28", /* DAT1 */ - "GPIO267_AC27"; /* DAT0 */ - ste,config = <&slpm_in_wkup_pdis_en>; - }; - }; - }; - mcde { lcd_default_mode: lcd_default { default_mux1 { -- 2.24.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-11-25 12:26 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-25 12:22 Stephan Gerhold [this message] 2019-11-25 12:22 ` [PATCH 1/5] ARM: dts: ux500: Move generic pin configs out of ste-href-family-pinctrl.dtsi Stephan Gerhold 2019-11-25 12:22 ` [PATCH 2/5] ARM: dts: ux500: Rename generic pin configs according to pin group Stephan Gerhold 2019-11-25 12:22 ` Stephan Gerhold 2019-11-25 15:37 ` Linus Walleij 2019-11-25 15:37 ` Linus Walleij 2019-11-25 12:22 ` [PATCH 3/5] ARM: dts: ux500: Add alternative SDI pin configs Stephan Gerhold 2019-11-25 12:22 ` Stephan Gerhold 2019-11-25 15:38 ` Linus Walleij 2019-11-25 15:38 ` Linus Walleij 2019-11-25 12:22 ` [PATCH 4/5] ARM: dts: ux500: Add pin configs for UART1 CTS/RTS pins Stephan Gerhold 2019-11-25 12:22 ` Stephan Gerhold 2019-11-25 14:17 ` Stephan Gerhold 2019-11-25 14:17 ` Stephan Gerhold 2019-11-25 15:40 ` Linus Walleij 2019-11-25 15:40 ` Linus Walleij 2019-11-25 12:22 ` [PATCH 5/5] ARM: dts: ux500: nomadik-pinctrl: Add &gpio_in_nopull Stephan Gerhold 2019-11-25 12:22 ` Stephan Gerhold 2019-11-25 15:35 ` [PATCH 1/5] ARM: dts: ux500: Move generic pin configs out of ste-href-family-pinctrl.dtsi Linus Walleij 2019-11-25 15:35 ` Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191125122256.53482-1-stephan@gerhold.net \ --to=stephan@gerhold.net \ --cc=devicetree@vger.kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.