From: Roman Bolshakov <r.bolshakov@yadro.com> To: linux-scsi@vger.kernel.org, target-devel@vger.kernel.org Cc: linux@yadro.com, Roman Bolshakov <r.bolshakov@yadro.com> Subject: [PATCH v3 00/13] scsi: qla2xxx: Bug fixes Date: Mon, 25 Nov 2019 16:56:49 +0000 [thread overview] Message-ID: <20191125165702.1013-1-r.bolshakov@yadro.com> (raw) Hi Martin, The patch series contains fixes for qla2xxx and solves two visible issues: - Target port in N2N topology doesn't perform login if it has higher WWPN than initiator - ABORT TASK TMF leads to crash if it's received shortly after ACL of an initiator is deleted and there's active I/O from the initiator It also contains reliability improvements and cleanups. Changes since v2 (https://patchwork.kernel.org/cover/11254937/): - Target is allowed to perform PLOGI only if it detects N2N mode; - Dropped patches to improve ABTS handling for ports that are not currently logged in. They will go into a separate patch series. Changes since v1 (https://patchwork.kernel.org/cover/11141979/): - Fixes target port in N2N mode were added (patches 5-11); - Target port makes explicit LOGO on session teardown in the patch made by Quinn. Together with patch 1, it helps to immediately turn fc_remote_port to the Blocked stated on client side and avoids visibly stuck session; - The last three patches address violation of FCP specification with regards to handling of ABTS-LS from ports that are not currently logged in. Thank you, Roman Quinn Tran (1): scsi: qla2xxx: Use explicit LOGO in target mode Roman Bolshakov (12): scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd scsi: qla2xxx: Initialize free_work before flushing it scsi: qla2xxx: Drop superfluous INIT_WORK of del_work scsi: qla2xxx: Change discovery state before PLOGI scsi: qla2xxx: Allow PLOGI in target mode scsi: qla2xxx: Don't call qlt_async_event twice scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length scsi: qla2xxx: Configure local loop for N2N target scsi: qla2xxx: Send Notify ACK after N2N PLOGI scsi: qla2xxx: Don't defer relogin unconditonally scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB drivers/scsi/qla2xxx/qla_def.h | 1 + drivers/scsi/qla2xxx/qla_init.c | 21 ++++++++++---------- drivers/scsi/qla2xxx/qla_iocb.c | 31 ++++++++++++++++++++++++------ drivers/scsi/qla2xxx/qla_isr.c | 4 ---- drivers/scsi/qla2xxx/qla_mbx.c | 3 ++- drivers/scsi/qla2xxx/qla_target.c | 4 ++-- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 3 +++ 7 files changed, 43 insertions(+), 24 deletions(-) -- 2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Roman Bolshakov <r.bolshakov@yadro.com> To: <linux-scsi@vger.kernel.org>, <target-devel@vger.kernel.org> Cc: <linux@yadro.com>, Roman Bolshakov <r.bolshakov@yadro.com> Subject: [PATCH v3 00/13] scsi: qla2xxx: Bug fixes Date: Mon, 25 Nov 2019 19:56:49 +0300 [thread overview] Message-ID: <20191125165702.1013-1-r.bolshakov@yadro.com> (raw) Hi Martin, The patch series contains fixes for qla2xxx and solves two visible issues: - Target port in N2N topology doesn't perform login if it has higher WWPN than initiator - ABORT TASK TMF leads to crash if it's received shortly after ACL of an initiator is deleted and there's active I/O from the initiator It also contains reliability improvements and cleanups. Changes since v2 (https://patchwork.kernel.org/cover/11254937/): - Target is allowed to perform PLOGI only if it detects N2N mode; - Dropped patches to improve ABTS handling for ports that are not currently logged in. They will go into a separate patch series. Changes since v1 (https://patchwork.kernel.org/cover/11141979/): - Fixes target port in N2N mode were added (patches 5-11); - Target port makes explicit LOGO on session teardown in the patch made by Quinn. Together with patch 1, it helps to immediately turn fc_remote_port to the Blocked stated on client side and avoids visibly stuck session; - The last three patches address violation of FCP specification with regards to handling of ABTS-LS from ports that are not currently logged in. Thank you, Roman Quinn Tran (1): scsi: qla2xxx: Use explicit LOGO in target mode Roman Bolshakov (12): scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd scsi: qla2xxx: Initialize free_work before flushing it scsi: qla2xxx: Drop superfluous INIT_WORK of del_work scsi: qla2xxx: Change discovery state before PLOGI scsi: qla2xxx: Allow PLOGI in target mode scsi: qla2xxx: Don't call qlt_async_event twice scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length scsi: qla2xxx: Configure local loop for N2N target scsi: qla2xxx: Send Notify ACK after N2N PLOGI scsi: qla2xxx: Don't defer relogin unconditonally scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB drivers/scsi/qla2xxx/qla_def.h | 1 + drivers/scsi/qla2xxx/qla_init.c | 21 ++++++++++---------- drivers/scsi/qla2xxx/qla_iocb.c | 31 ++++++++++++++++++++++++------ drivers/scsi/qla2xxx/qla_isr.c | 4 ---- drivers/scsi/qla2xxx/qla_mbx.c | 3 ++- drivers/scsi/qla2xxx/qla_target.c | 4 ++-- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 3 +++ 7 files changed, 43 insertions(+), 24 deletions(-) -- 2.24.0
next reply other threads:[~2019-11-25 16:56 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-25 16:56 Roman Bolshakov [this message] 2019-11-25 16:56 ` [PATCH v3 00/13] scsi: qla2xxx: Bug fixes Roman Bolshakov 2019-11-25 16:56 ` [PATCH v3 01/13] scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd Roman Bolshakov 2019-11-25 16:56 ` Roman Bolshakov 2019-11-26 20:55 ` Bart Van Assche 2019-11-26 20:55 ` Bart Van Assche 2019-11-25 16:56 ` [PATCH v3 02/13] scsi: qla2xxx: Use explicit LOGO in target mode Roman Bolshakov 2019-11-25 16:56 ` Roman Bolshakov 2019-11-25 16:56 ` [PATCH v3 03/13] scsi: qla2xxx: Initialize free_work before flushing it Roman Bolshakov 2019-11-25 16:56 ` Roman Bolshakov 2019-11-26 20:55 ` Bart Van Assche 2019-11-26 20:55 ` Bart Van Assche 2019-11-25 16:56 ` [PATCH v3 04/13] scsi: qla2xxx: Drop superfluous INIT_WORK of del_work Roman Bolshakov 2019-11-25 16:56 ` Roman Bolshakov 2019-11-26 20:56 ` Bart Van Assche 2019-11-26 20:56 ` Bart Van Assche 2019-11-25 16:56 ` [PATCH v3 05/13] scsi: qla2xxx: Change discovery state before PLOGI Roman Bolshakov 2019-11-25 16:56 ` Roman Bolshakov 2019-11-25 16:56 ` [PATCH v3 06/13] scsi: qla2xxx: Allow PLOGI in target mode Roman Bolshakov 2019-11-25 16:56 ` Roman Bolshakov 2019-11-25 16:56 ` [PATCH v3 07/13] scsi: qla2xxx: Don't call qlt_async_event twice Roman Bolshakov 2019-11-25 16:56 ` Roman Bolshakov 2019-11-25 17:00 ` Roman Bolshakov 2019-11-25 17:00 ` Roman Bolshakov 2019-11-25 16:56 ` [PATCH v3 08/13] scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length Roman Bolshakov 2019-11-25 16:56 ` Roman Bolshakov 2019-11-25 16:56 ` [PATCH v3 09/13] scsi: qla2xxx: Configure local loop for N2N target Roman Bolshakov 2019-11-25 16:56 ` Roman Bolshakov 2019-11-25 16:56 ` [PATCH v3 10/13] scsi: qla2xxx: Send Notify ACK after N2N PLOGI Roman Bolshakov 2019-11-25 16:56 ` Roman Bolshakov 2019-11-25 16:57 ` [PATCH v3 11/13] scsi: qla2xxx: Don't defer relogin unconditonally Roman Bolshakov 2019-11-25 16:57 ` Roman Bolshakov 2019-11-25 16:57 ` [PATCH v3 12/13] scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI Roman Bolshakov 2019-11-25 16:57 ` Roman Bolshakov 2019-11-25 16:57 ` [PATCH v3 13/13] scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB Roman Bolshakov 2019-11-25 16:57 ` Roman Bolshakov 2019-11-26 20:57 ` Bart Van Assche 2019-11-26 20:57 ` Bart Van Assche 2019-11-26 20:56 ` [PATCH v3 00/13] scsi: qla2xxx: Bug fixes Bart Van Assche 2019-11-26 20:56 ` Bart Van Assche 2019-11-27 17:24 ` Roman Bolshakov 2019-11-27 17:24 ` Roman Bolshakov 2019-11-27 17:34 ` Bart Van Assche 2019-11-27 17:34 ` Bart Van Assche 2019-11-28 12:18 ` Martin K. Petersen 2019-11-28 12:18 ` Martin K. Petersen 2019-12-09 23:36 ` Martin K. Petersen 2019-12-09 23:36 ` Martin K. Petersen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191125165702.1013-1-r.bolshakov@yadro.com \ --to=r.bolshakov@yadro.com \ --cc=linux-scsi@vger.kernel.org \ --cc=linux@yadro.com \ --cc=target-devel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.