All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adrian Ratiu <adrian.ratiu@collabora.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-rockchip@lists.infradead.org
Cc: kernel@collabora.com, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-imx@nxp.com,
	Rob Herring <robh@kernel.org>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Sjoerd Simons <sjoerd.simons@collabora.com>,
	Martyn Welch <martyn.welch@collabora.com>
Subject: [PATCH v4 4/4] dt-bindings: display: add i.MX6 MIPI DSI host controller doc
Date: Mon,  2 Dec 2019 21:33:59 +0200	[thread overview]
Message-ID: <20191202193359.703709-5-adrian.ratiu@collabora.com> (raw)
In-Reply-To: <20191202193359.703709-1-adrian.ratiu@collabora.com>

This provides an example DT binding for the MIPI DSI host controller
present on the i.MX6 SoC based on Synopsis DesignWare v1.01 IP.

Cc: Rob Herring <robh@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
---
 .../display/imx/fsl,mipi-dsi-imx6.yaml        | 136 ++++++++++++++++++
 1 file changed, 136 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
new file mode 100644
index 000000000000..8c9603c28240
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/fsl,mipi-dsi-imx6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 DW MIPI DSI Host Controller
+
+description:
+  The DSI host controller is a Synopsys DesignWare MIPI DSI v1.01 IP with a companion PHY IP.
+
+  These DT bindings follow the Synopsys DW MIPI DSI bindings defined in
+  Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt with
+  the following device-specific properties.
+
+properties:
+  compatible:
+    const: [ "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi" ]
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Module Clock
+      - description: DSI bus clock
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: ref
+    minItems: 2
+    maxItems: 2
+
+  fsl,gpr:
+    description: Phandle to the iomuxc-gpr region containing the multiplexer control register.
+    const: *gpr
+
+  ports:
+    type: object
+    description:
+      A node containing DSI input & output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+      Documentation/devicetree/bindings/graph.txt
+    properties:
+      port@0:
+        type: object
+        description:
+          DSI input port node, connected to the ltdc rgb output port.
+
+      port@1:
+        type: object
+        description:
+          DSI output port node, connected to a panel or a bridge input port"
+
+patternProperties:
+  "^(panel|panel-dsi)@[0-9]$":
+    type: object
+    description:
+      A node containing the panel or bridge description as documented in
+      Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
+    properties:
+      port:
+        type: object
+        description:
+          Panel or bridge port node, connected to the DSI output port (port@1)
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi: dsi@21e0000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
+        reg = <0x021e0000 0x4000>;
+        interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+        fsl,gpr = <&gpr>;
+        clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+                 <&clks IMX6QDL_CLK_MIPI_IPG>;
+        clock-names = "ref", "pclk";
+
+        ports {
+            port@0 {
+                reg = <0>;
+                dsi_in: endpoint {
+                    remote-endpoint = <&ltdc_ep1_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+
+        panel@0 {
+            compatible = "sharp,ls032b3sx01";
+            reg = <0>;
+            reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
+
+            ports {
+                port@0 {
+                    panel_in: endpoint {
+                        remote-endpoint = <&dsi_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
-- 
2.24.0


WARNING: multiple messages have this Message-ID (diff)
From: Adrian Ratiu <adrian.ratiu@collabora.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-rockchip@lists.infradead.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	Martyn Welch <martyn.welch@collabora.com>,
	Sjoerd Simons <sjoerd.simons@collabora.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-imx@nxp.com, kernel@collabora.com
Subject: [PATCH v4 4/4] dt-bindings: display: add i.MX6 MIPI DSI host controller doc
Date: Mon,  2 Dec 2019 21:33:59 +0200	[thread overview]
Message-ID: <20191202193359.703709-5-adrian.ratiu@collabora.com> (raw)
In-Reply-To: <20191202193359.703709-1-adrian.ratiu@collabora.com>

This provides an example DT binding for the MIPI DSI host controller
present on the i.MX6 SoC based on Synopsis DesignWare v1.01 IP.

Cc: Rob Herring <robh@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
---
 .../display/imx/fsl,mipi-dsi-imx6.yaml        | 136 ++++++++++++++++++
 1 file changed, 136 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
new file mode 100644
index 000000000000..8c9603c28240
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/fsl,mipi-dsi-imx6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 DW MIPI DSI Host Controller
+
+description:
+  The DSI host controller is a Synopsys DesignWare MIPI DSI v1.01 IP with a companion PHY IP.
+
+  These DT bindings follow the Synopsys DW MIPI DSI bindings defined in
+  Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt with
+  the following device-specific properties.
+
+properties:
+  compatible:
+    const: [ "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi" ]
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Module Clock
+      - description: DSI bus clock
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: ref
+    minItems: 2
+    maxItems: 2
+
+  fsl,gpr:
+    description: Phandle to the iomuxc-gpr region containing the multiplexer control register.
+    const: *gpr
+
+  ports:
+    type: object
+    description:
+      A node containing DSI input & output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+      Documentation/devicetree/bindings/graph.txt
+    properties:
+      port@0:
+        type: object
+        description:
+          DSI input port node, connected to the ltdc rgb output port.
+
+      port@1:
+        type: object
+        description:
+          DSI output port node, connected to a panel or a bridge input port"
+
+patternProperties:
+  "^(panel|panel-dsi)@[0-9]$":
+    type: object
+    description:
+      A node containing the panel or bridge description as documented in
+      Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
+    properties:
+      port:
+        type: object
+        description:
+          Panel or bridge port node, connected to the DSI output port (port@1)
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi: dsi@21e0000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
+        reg = <0x021e0000 0x4000>;
+        interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+        fsl,gpr = <&gpr>;
+        clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+                 <&clks IMX6QDL_CLK_MIPI_IPG>;
+        clock-names = "ref", "pclk";
+
+        ports {
+            port@0 {
+                reg = <0>;
+                dsi_in: endpoint {
+                    remote-endpoint = <&ltdc_ep1_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+
+        panel@0 {
+            compatible = "sharp,ls032b3sx01";
+            reg = <0>;
+            reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
+
+            ports {
+                port@0 {
+                    panel_in: endpoint {
+                        remote-endpoint = <&dsi_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
-- 
2.24.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: Adrian Ratiu <adrian.ratiu@collabora.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-rockchip@lists.infradead.org
Cc: Rob Herring <robh@kernel.org>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Martyn Welch <martyn.welch@collabora.com>,
	Sjoerd Simons <sjoerd.simons@collabora.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-imx@nxp.com, kernel@collabora.com
Subject: [PATCH v4 4/4] dt-bindings: display: add i.MX6 MIPI DSI host controller doc
Date: Mon,  2 Dec 2019 21:33:59 +0200	[thread overview]
Message-ID: <20191202193359.703709-5-adrian.ratiu@collabora.com> (raw)
In-Reply-To: <20191202193359.703709-1-adrian.ratiu@collabora.com>

This provides an example DT binding for the MIPI DSI host controller
present on the i.MX6 SoC based on Synopsis DesignWare v1.01 IP.

Cc: Rob Herring <robh@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
---
 .../display/imx/fsl,mipi-dsi-imx6.yaml        | 136 ++++++++++++++++++
 1 file changed, 136 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml

diff --git a/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
new file mode 100644
index 000000000000..8c9603c28240
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/fsl,mipi-dsi-imx6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 DW MIPI DSI Host Controller
+
+description:
+  The DSI host controller is a Synopsys DesignWare MIPI DSI v1.01 IP with a companion PHY IP.
+
+  These DT bindings follow the Synopsys DW MIPI DSI bindings defined in
+  Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt with
+  the following device-specific properties.
+
+properties:
+  compatible:
+    const: [ "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi" ]
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Module Clock
+      - description: DSI bus clock
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: ref
+    minItems: 2
+    maxItems: 2
+
+  fsl,gpr:
+    description: Phandle to the iomuxc-gpr region containing the multiplexer control register.
+    const: *gpr
+
+  ports:
+    type: object
+    description:
+      A node containing DSI input & output port nodes with endpoint
+      definitions as documented in
+      Documentation/devicetree/bindings/media/video-interfaces.txt
+      Documentation/devicetree/bindings/graph.txt
+    properties:
+      port@0:
+        type: object
+        description:
+          DSI input port node, connected to the ltdc rgb output port.
+
+      port@1:
+        type: object
+        description:
+          DSI output port node, connected to a panel or a bridge input port"
+
+patternProperties:
+  "^(panel|panel-dsi)@[0-9]$":
+    type: object
+    description:
+      A node containing the panel or bridge description as documented in
+      Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
+    properties:
+      port:
+        type: object
+        description:
+          Panel or bridge port node, connected to the DSI output port (port@1)
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi: dsi@21e0000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
+        reg = <0x021e0000 0x4000>;
+        interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+        fsl,gpr = <&gpr>;
+        clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+                 <&clks IMX6QDL_CLK_MIPI_IPG>;
+        clock-names = "ref", "pclk";
+
+        ports {
+            port@0 {
+                reg = <0>;
+                dsi_in: endpoint {
+                    remote-endpoint = <&ltdc_ep1_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+
+        panel@0 {
+            compatible = "sharp,ls032b3sx01";
+            reg = <0>;
+            reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
+
+            ports {
+                port@0 {
+                    panel_in: endpoint {
+                        remote-endpoint = <&dsi_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
-- 
2.24.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-12-02 19:34 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-02 19:33 [PATCH v4 0/4] Genericize DW MIPI DSI bridge and add i.MX 6 driver Adrian Ratiu
2019-12-02 19:33 ` Adrian Ratiu
2019-12-02 19:33 ` Adrian Ratiu
2019-12-02 19:33 ` [PATCH v4 1/4] drm: bridge: dw_mipi_dsi: access registers via a regmap Adrian Ratiu
2019-12-02 19:33   ` Adrian Ratiu
2019-12-02 19:33   ` Adrian Ratiu
2019-12-16 16:10   ` Ezequiel Garcia
2019-12-16 16:10     ` Ezequiel Garcia
2019-12-16 16:10     ` Ezequiel Garcia
2019-12-16 16:10     ` Ezequiel Garcia
2019-12-02 19:33 ` [PATCH v4 2/4] drm: bridge: dw_mipi_dsi: abstract register access using reg_fields Adrian Ratiu
2019-12-02 19:33   ` Adrian Ratiu
2019-12-02 19:33   ` Adrian Ratiu
2019-12-02 19:33 ` [PATCH v4 3/4] drm: imx: Add i.MX 6 MIPI DSI host driver Adrian Ratiu
2019-12-02 19:33   ` Adrian Ratiu
2019-12-02 19:33   ` Adrian Ratiu
2019-12-02 19:33 ` Adrian Ratiu [this message]
2019-12-02 19:33   ` [PATCH v4 4/4] dt-bindings: display: add i.MX6 MIPI DSI host controller doc Adrian Ratiu
2019-12-02 19:33   ` Adrian Ratiu
2019-12-13 23:39   ` Rob Herring
2019-12-13 23:39     ` Rob Herring
2019-12-13 23:39     ` Rob Herring
2019-12-13 23:39     ` Rob Herring
2019-12-06 10:29 ` [Linux-stm32] [PATCH v4 0/4] Genericize DW MIPI DSI bridge and add i.MX 6 driver Philippe CORNU
2019-12-06 10:29   ` Philippe CORNU
2019-12-06 10:29   ` Philippe CORNU
2019-12-06 10:29   ` Philippe CORNU
2019-12-10 11:43   ` Adrian Ratiu
2019-12-10 11:43     ` Adrian Ratiu
2019-12-10 11:43     ` Adrian Ratiu
2019-12-10 11:43     ` Adrian Ratiu
2019-12-10 11:41 ` Adrian Ratiu
2019-12-10 11:41   ` Adrian Ratiu
2019-12-10 11:41   ` Adrian Ratiu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191202193359.703709-5-adrian.ratiu@collabora.com \
    --to=adrian.ratiu@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kernel@collabora.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=martyn.welch@collabora.com \
    --cc=narmstrong@baylibre.com \
    --cc=robh@kernel.org \
    --cc=sjoerd.simons@collabora.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.