From: Florian Fainelli <f.fainelli@gmail.com> To: linux-arm-kernel@lists.infradead.org, daniel.lezcano@linaro.org Cc: Florian Fainelli <f.fainelli@gmail.com>, Markus Mayer <mmayer@broadcom.com>, bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM STB AVS TMON DRIVER), Zhang Rui <rui.zhang@intel.com>, Eduardo Valentin <edubezval@gmail.com>, Amit Kucheria <amit.kucheria@verdurent.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, linux-pm@vger.kernel.org (open list:BROADCOM STB AVS TMON DRIVER), devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v2 4/6] thermal: brcmstb_thermal: Add 16nm process thermal parameters Date: Wed, 11 Dec 2019 12:31:41 -0800 [thread overview] Message-ID: <20191211203143.2952-5-f.fainelli@gmail.com> (raw) In-Reply-To: <20191211203143.2952-1-f.fainelli@gmail.com> Match the 7216 compatible string in order to derive the correct 16nm process thermal parameters to obtain correct readings. Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/thermal/broadcom/brcmstb_thermal.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c index 68f89f7c7e7f..74d94f01b1b9 100644 --- a/drivers/thermal/broadcom/brcmstb_thermal.c +++ b/drivers/thermal/broadcom/brcmstb_thermal.c @@ -292,12 +292,18 @@ static const struct thermal_zone_of_device_ops of_ops = { .set_trips = brcmstb_set_trips, }; +static const struct brcmstb_thermal_params brcmstb_16nm_params = { + .offset = 457829, + .mult = 557, +}; + static const struct brcmstb_thermal_params brcmstb_28nm_params = { .offset = 410040, .mult = 487, }; static const struct of_device_id brcmstb_thermal_id_table[] = { + { .compatible = "brcm,avs-tmon-bcm7216", .data = &brcmstb_16nm_params }, { .compatible = "brcm,avs-tmon", .data = &brcmstb_28nm_params }, {}, }; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli@gmail.com> To: linux-arm-kernel@lists.infradead.org, daniel.lezcano@linaro.org Cc: Mark Rutland <mark.rutland@arm.com>, "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@vger.kernel.org>, Amit Kucheria <amit.kucheria@verdurent.com>, Florian Fainelli <f.fainelli@gmail.com>, "open list:BROADCOM STB AVS TMON DRIVER" <linux-pm@vger.kernel.org>, open list <linux-kernel@vger.kernel.org>, Eduardo Valentin <edubezval@gmail.com>, Rob Herring <robh+dt@kernel.org>, "maintainer:BROADCOM STB AVS TMON DRIVER" <bcm-kernel-feedback-list@broadcom.com>, Markus Mayer <mmayer@broadcom.com>, Zhang Rui <rui.zhang@intel.com> Subject: [PATCH v2 4/6] thermal: brcmstb_thermal: Add 16nm process thermal parameters Date: Wed, 11 Dec 2019 12:31:41 -0800 [thread overview] Message-ID: <20191211203143.2952-5-f.fainelli@gmail.com> (raw) In-Reply-To: <20191211203143.2952-1-f.fainelli@gmail.com> Match the 7216 compatible string in order to derive the correct 16nm process thermal parameters to obtain correct readings. Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/thermal/broadcom/brcmstb_thermal.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c index 68f89f7c7e7f..74d94f01b1b9 100644 --- a/drivers/thermal/broadcom/brcmstb_thermal.c +++ b/drivers/thermal/broadcom/brcmstb_thermal.c @@ -292,12 +292,18 @@ static const struct thermal_zone_of_device_ops of_ops = { .set_trips = brcmstb_set_trips, }; +static const struct brcmstb_thermal_params brcmstb_16nm_params = { + .offset = 457829, + .mult = 557, +}; + static const struct brcmstb_thermal_params brcmstb_28nm_params = { .offset = 410040, .mult = 487, }; static const struct of_device_id brcmstb_thermal_id_table[] = { + { .compatible = "brcm,avs-tmon-bcm7216", .data = &brcmstb_16nm_params }, { .compatible = "brcm,avs-tmon", .data = &brcmstb_28nm_params }, {}, }; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-12-11 20:32 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-11 20:31 [PATCH v2 0/6] brcmstb_thermal updates for new processes Florian Fainelli 2019-12-11 20:31 ` Florian Fainelli 2019-12-11 20:31 ` [PATCH v2 1/6] thermal: brcmstb_thermal: Do not use DT coefficients Florian Fainelli 2019-12-11 20:31 ` Florian Fainelli 2019-12-11 20:31 ` [PATCH v2 2/6] thermal: brcmstb_thermal: Prepare to support a different process Florian Fainelli 2019-12-11 20:31 ` Florian Fainelli 2020-01-09 21:17 ` Daniel Lezcano 2020-01-09 21:17 ` Daniel Lezcano 2020-01-11 0:37 ` Florian Fainelli 2020-01-11 0:37 ` Florian Fainelli 2019-12-11 20:31 ` [PATCH v2 3/6] dt-bindings: thermal: Define BCM7216 thermal sensor compatible Florian Fainelli 2019-12-11 20:31 ` Florian Fainelli 2019-12-11 20:31 ` Florian Fainelli [this message] 2019-12-11 20:31 ` [PATCH v2 4/6] thermal: brcmstb_thermal: Add 16nm process thermal parameters Florian Fainelli 2019-12-11 20:31 ` [PATCH v2 5/6] thermal: brcmstb_thermal: Restructure interrupt registration Florian Fainelli 2019-12-11 20:31 ` Florian Fainelli 2019-12-11 20:31 ` [PATCH v2 6/6] thermal: brcmstb_thermal: Register different ops per process Florian Fainelli 2019-12-11 20:31 ` Florian Fainelli 2019-12-26 15:54 ` [PATCH v2 0/6] brcmstb_thermal updates for new processes Florian Fainelli 2019-12-26 15:54 ` Florian Fainelli 2020-01-08 18:07 ` Florian Fainelli 2020-01-08 18:07 ` Florian Fainelli
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191211203143.2952-5-f.fainelli@gmail.com \ --to=f.fainelli@gmail.com \ --cc=amit.kucheria@verdurent.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=edubezval@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=mmayer@broadcom.com \ --cc=robh+dt@kernel.org \ --cc=rui.zhang@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.