From: <Codrin.Ciubotariu@microchip.com>
To: <linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: <kamel.bouhara@bootlin.com>, <wsa@the-dreams.de>,
<Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<Ludovic.Desroches@microchip.com>, <robh@kernel.org>
Subject: [PATCH v2 5/6] ARM: at91/dt: sama5d4: add i2c gpio pinctrl
Date: Fri, 3 Jan 2020 09:49:08 +0000 [thread overview]
Message-ID: <20200103094821.13185-6-codrin.ciubotariu@microchip.com> (raw)
In-Reply-To: <20200103094821.13185-1-codrin.ciubotariu@microchip.com>
From: Kamel Bouhara <kamel.bouhara@bootlin.com>
Add the i2c gpio pinctrls so the i2c bus recovery option can be enabled
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
---
Changes in v2:
- none;
arch/arm/boot/dts/sama5d4.dtsi | 33 ++++++++++++++++++++++++++++++---
1 file changed, 30 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 6ab27a7b388d..34351baab985 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -458,8 +458,11 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(3))>;
dma-names = "tx", "rx";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
@@ -477,8 +480,11 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(5))>;
dma-names = "tx", "rx";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioE 30 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
@@ -519,8 +525,11 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(7))>;
dma-names = "tx", "rx";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
@@ -1122,6 +1131,12 @@
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+ AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
};
i2c1 {
@@ -1130,6 +1145,12 @@
<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* TWD1, conflicts with UART0 RX and DIBP */
AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */
};
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ atmel,pins =
+ <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+ AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
};
i2c2 {
@@ -1138,6 +1159,12 @@
<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* TWD2, conflicts with RD0 and PWML1 */
AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
};
+
+ pinctrl_i2c2_gpio: i2c2-gpio {
+ atmel,pins =
+ <AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+ AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
};
isi {
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: <Codrin.Ciubotariu@microchip.com>
To: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: kamel.bouhara@bootlin.com, wsa@the-dreams.de,
Nicolas.Ferre@microchip.com, alexandre.belloni@bootlin.com,
Ludovic.Desroches@microchip.com, robh@kernel.org
Subject: [PATCH v2 5/6] ARM: at91/dt: sama5d4: add i2c gpio pinctrl
Date: Fri, 3 Jan 2020 09:49:08 +0000 [thread overview]
Message-ID: <20200103094821.13185-6-codrin.ciubotariu@microchip.com> (raw)
In-Reply-To: <20200103094821.13185-1-codrin.ciubotariu@microchip.com>
From: Kamel Bouhara <kamel.bouhara@bootlin.com>
Add the i2c gpio pinctrls so the i2c bus recovery option can be enabled
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
---
Changes in v2:
- none;
arch/arm/boot/dts/sama5d4.dtsi | 33 ++++++++++++++++++++++++++++++---
1 file changed, 30 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 6ab27a7b388d..34351baab985 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -458,8 +458,11 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(3))>;
dma-names = "tx", "rx";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
@@ -477,8 +480,11 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(5))>;
dma-names = "tx", "rx";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioE 30 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
@@ -519,8 +525,11 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(7))>;
dma-names = "tx", "rx";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
@@ -1122,6 +1131,12 @@
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+ AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
};
i2c1 {
@@ -1130,6 +1145,12 @@
<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* TWD1, conflicts with UART0 RX and DIBP */
AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */
};
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ atmel,pins =
+ <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+ AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
};
i2c2 {
@@ -1138,6 +1159,12 @@
<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* TWD2, conflicts with RD0 and PWML1 */
AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
};
+
+ pinctrl_i2c2_gpio: i2c2-gpio {
+ atmel,pins =
+ <AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+ AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
};
isi {
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: <Codrin.Ciubotariu@microchip.com>
To: <linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: robh@kernel.org, alexandre.belloni@bootlin.com,
kamel.bouhara@bootlin.com, wsa@the-dreams.de,
Ludovic.Desroches@microchip.com
Subject: [PATCH v2 5/6] ARM: at91/dt: sama5d4: add i2c gpio pinctrl
Date: Fri, 3 Jan 2020 09:49:08 +0000 [thread overview]
Message-ID: <20200103094821.13185-6-codrin.ciubotariu@microchip.com> (raw)
In-Reply-To: <20200103094821.13185-1-codrin.ciubotariu@microchip.com>
From: Kamel Bouhara <kamel.bouhara@bootlin.com>
Add the i2c gpio pinctrls so the i2c bus recovery option can be enabled
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
---
Changes in v2:
- none;
arch/arm/boot/dts/sama5d4.dtsi | 33 ++++++++++++++++++++++++++++++---
1 file changed, 30 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 6ab27a7b388d..34351baab985 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -458,8 +458,11 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(3))>;
dma-names = "tx", "rx";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
@@ -477,8 +480,11 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(5))>;
dma-names = "tx", "rx";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioE 30 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
@@ -519,8 +525,11 @@
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(7))>;
dma-names = "tx", "rx";
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
@@ -1122,6 +1131,12 @@
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
+
+ pinctrl_i2c0_gpio: i2c0-gpio {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+ AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
};
i2c1 {
@@ -1130,6 +1145,12 @@
<AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* TWD1, conflicts with UART0 RX and DIBP */
AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */
};
+
+ pinctrl_i2c1_gpio: i2c1-gpio {
+ atmel,pins =
+ <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+ AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
};
i2c2 {
@@ -1138,6 +1159,12 @@
<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* TWD2, conflicts with RD0 and PWML1 */
AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
};
+
+ pinctrl_i2c2_gpio: i2c2-gpio {
+ atmel,pins =
+ <AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+ AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
};
isi {
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-03 9:49 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-03 9:49 [PATCH v2 0/6] i2c bus recovery for Microchip SoCs Codrin.Ciubotariu
2020-01-03 9:49 ` Codrin.Ciubotariu
2020-01-03 9:49 ` Codrin.Ciubotariu
2020-01-03 9:49 ` [PATCH v2 1/6] dt-bindings: i2c: at91: document optional bus recovery properties Codrin.Ciubotariu
2020-01-03 9:49 ` Codrin.Ciubotariu
2020-01-03 9:49 ` Codrin.Ciubotariu
2020-01-03 22:29 ` Rob Herring
2020-01-03 22:29 ` Rob Herring
2020-01-03 22:29 ` Rob Herring
2020-01-06 16:34 ` Codrin.Ciubotariu
2020-01-06 16:34 ` Codrin.Ciubotariu
2020-01-06 16:34 ` Codrin.Ciubotariu
2020-01-03 9:49 ` [PATCH v2 2/6] i2c: at91: implement i2c bus recovery Codrin.Ciubotariu
2020-01-03 9:49 ` Codrin.Ciubotariu
2020-01-03 9:49 ` Codrin.Ciubotariu
2020-01-09 7:48 ` Ludovic Desroches
2020-01-09 7:48 ` Ludovic Desroches
2020-01-09 7:48 ` Ludovic Desroches
2020-01-09 10:54 ` Codrin.Ciubotariu
2020-01-09 10:54 ` Codrin.Ciubotariu
2020-01-09 10:54 ` Codrin.Ciubotariu-UWL1GkI3JZL3oGB3hsPCZA
2020-01-03 9:49 ` [PATCH v2 3/6] i2c: at91: Send bus clear command if SCL is down Codrin.Ciubotariu
2020-01-03 9:49 ` Codrin.Ciubotariu
2020-01-03 9:49 ` Codrin.Ciubotariu
2020-01-09 7:47 ` Ludovic Desroches
2020-01-09 7:47 ` Ludovic Desroches
2020-01-09 7:47 ` Ludovic Desroches
2020-01-09 10:58 ` Codrin.Ciubotariu
2020-01-09 10:58 ` Codrin.Ciubotariu
2020-01-09 10:58 ` Codrin.Ciubotariu
2020-01-09 11:05 ` Russell King - ARM Linux admin
2020-01-09 11:05 ` Russell King - ARM Linux admin
2020-01-09 13:29 ` Codrin.Ciubotariu
2020-01-09 13:29 ` Codrin.Ciubotariu
2020-01-09 13:29 ` Codrin.Ciubotariu-UWL1GkI3JZL3oGB3hsPCZA
2020-01-03 9:49 ` Codrin.Ciubotariu [this message]
2020-01-03 9:49 ` [PATCH v2 5/6] ARM: at91/dt: sama5d4: add i2c gpio pinctrl Codrin.Ciubotariu
2020-01-03 9:49 ` Codrin.Ciubotariu
2020-01-03 9:49 ` [PATCH v2 4/6] ARM: at91/dt: sama5d3: " Codrin.Ciubotariu
2020-01-03 9:49 ` Codrin.Ciubotariu
2020-01-03 9:49 ` Codrin.Ciubotariu
2020-01-04 22:39 ` Peter Rosin
2020-01-04 22:39 ` Peter Rosin
2020-01-04 22:39 ` Peter Rosin
2020-01-06 16:58 ` Codrin.Ciubotariu
2020-01-06 16:58 ` Codrin.Ciubotariu
2020-01-06 16:58 ` Codrin.Ciubotariu
2020-01-03 9:49 ` [PATCH v2 6/6] ARM: at91/dt: sama5d2: " Codrin.Ciubotariu
2020-01-03 9:49 ` Codrin.Ciubotariu
2020-01-03 9:49 ` Codrin.Ciubotariu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200103094821.13185-6-codrin.ciubotariu@microchip.com \
--to=codrin.ciubotariu@microchip.com \
--cc=Ludovic.Desroches@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=kamel.bouhara@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.