From: Remi Pommarel <repk@triplefau.lt>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Yue Wang <yue.wang@Amlogic.com>,
Kevin Hilman <khilman@baylibre.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Remi Pommarel <repk@triplefau.lt>
Subject: [PATCH v5 4/7] arm64: dts: meson-axg: Add PCIE PHY nodes
Date: Thu, 16 Jan 2020 12:18:47 +0100 [thread overview]
Message-ID: <20200116111850.23690-5-repk@triplefau.lt> (raw)
In-Reply-To: <20200116111850.23690-1-repk@triplefau.lt>
Enable both PCIE and shared MIPI/PCIE PHY nodes in order to make PCIE
reliable on AXG SoC.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 04803c3bccfa..08a178aa0133 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+#include <dt-bindings/phy/phy.h>
/ {
compatible = "amlogic,meson-axg";
@@ -1104,6 +1105,12 @@ hiubus: bus@ff63c000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+ mipi_analog_phy: phy@0 {
+ compatible = "amlogic,axg-mipi-pcie-analog-phy";
+ reg = <0x0 0x0 0x0 0xc>;
+ #phy-cells = <1>;
+ };
+
sysctrl: system-controller@0 {
compatible = "amlogic,meson-axg-hhi-sysctrl",
"simple-mfd", "syscon";
@@ -1356,6 +1363,15 @@ tdmout_c: audio-controller@580 {
};
};
+ pcie_phy: bus@ff644000 {
+ compatible = "amlogic,axg-pcie-phy";
+ reg = <0x0 0xff644000 0x0 0x1c>;
+ resets = <&reset RESET_PCIE_PHY>;
+ phys = <&mipi_analog_phy PHY_TYPE_PCIE>;
+ phy-names = "analog";
+ #phy-cells = <0>;
+ };
+
aobus: bus@ff800000 {
compatible = "simple-bus";
reg = <0x0 0xff800000 0x0 0x100000>;
--
2.24.1
WARNING: multiple messages have this Message-ID (diff)
From: Remi Pommarel <repk@triplefau.lt>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Yue Wang <yue.wang@Amlogic.com>,
Kevin Hilman <khilman@baylibre.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
Remi Pommarel <repk@triplefau.lt>,
linux-kernel@vger.kernel.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH v5 4/7] arm64: dts: meson-axg: Add PCIE PHY nodes
Date: Thu, 16 Jan 2020 12:18:47 +0100 [thread overview]
Message-ID: <20200116111850.23690-5-repk@triplefau.lt> (raw)
In-Reply-To: <20200116111850.23690-1-repk@triplefau.lt>
Enable both PCIE and shared MIPI/PCIE PHY nodes in order to make PCIE
reliable on AXG SoC.
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 04803c3bccfa..08a178aa0133 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -12,6 +12,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
+#include <dt-bindings/phy/phy.h>
/ {
compatible = "amlogic,meson-axg";
@@ -1104,6 +1105,12 @@ hiubus: bus@ff63c000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+ mipi_analog_phy: phy@0 {
+ compatible = "amlogic,axg-mipi-pcie-analog-phy";
+ reg = <0x0 0x0 0x0 0xc>;
+ #phy-cells = <1>;
+ };
+
sysctrl: system-controller@0 {
compatible = "amlogic,meson-axg-hhi-sysctrl",
"simple-mfd", "syscon";
@@ -1356,6 +1363,15 @@ tdmout_c: audio-controller@580 {
};
};
+ pcie_phy: bus@ff644000 {
+ compatible = "amlogic,axg-pcie-phy";
+ reg = <0x0 0xff644000 0x0 0x1c>;
+ resets = <&reset RESET_PCIE_PHY>;
+ phys = <&mipi_analog_phy PHY_TYPE_PCIE>;
+ phy-names = "analog";
+ #phy-cells = <0>;
+ };
+
aobus: bus@ff800000 {
compatible = "simple-bus";
reg = <0x0 0xff800000 0x0 0x100000>;
--
2.24.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2020-01-16 11:10 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-16 11:18 [PATCH v5 0/7] PCI: amlogic: Make PCIe working reliably on AXG platforms Remi Pommarel
2020-01-16 11:18 ` Remi Pommarel
2020-01-16 11:18 ` [PATCH v5 1/7] dt-bindings: Add AXG PCIE PHY bindings Remi Pommarel
2020-01-16 11:18 ` Remi Pommarel
2020-01-17 16:03 ` Rob Herring
2020-01-17 16:03 ` Rob Herring
2020-01-16 11:18 ` [PATCH v5 2/7] dt-bindings: Add AXG shared MIPI/PCIE analog " Remi Pommarel
2020-01-16 11:18 ` Remi Pommarel
2020-01-17 16:04 ` Rob Herring
2020-01-17 16:04 ` Rob Herring
2020-01-16 11:18 ` [PATCH v5 3/7] dt-bindings: PCI: meson: Update PCIE bindings documentation Remi Pommarel
2020-01-16 11:18 ` Remi Pommarel
2020-01-17 16:05 ` Rob Herring
2020-01-17 16:05 ` Rob Herring
2020-01-16 11:18 ` Remi Pommarel [this message]
2020-01-16 11:18 ` [PATCH v5 4/7] arm64: dts: meson-axg: Add PCIE PHY nodes Remi Pommarel
2020-01-23 9:56 ` Neil Armstrong
2020-01-23 9:56 ` Neil Armstrong
2020-01-16 11:18 ` [PATCH v5 5/7] phy: amlogic: Add Amlogic AXG MIPI/PCIE analog PHY Driver Remi Pommarel
2020-01-16 11:18 ` Remi Pommarel
2020-01-23 9:37 ` Jerome Brunet
2020-01-23 9:37 ` Jerome Brunet
2020-01-16 11:18 ` [PATCH v5 6/7] phy: amlogic: Add Amlogic AXG PCIE " Remi Pommarel
2020-01-16 11:18 ` Remi Pommarel
2020-01-23 9:44 ` Jerome Brunet
2020-01-23 9:44 ` Jerome Brunet
2020-01-23 10:56 ` Remi Pommarel
2020-01-23 10:56 ` Remi Pommarel
2020-01-16 11:18 ` [PATCH v5 7/7] PCI: amlogic: Use AXG PCIE Remi Pommarel
2020-01-16 11:18 ` Remi Pommarel
2020-01-16 20:13 ` Bjorn Helgaas
2020-01-16 20:13 ` Bjorn Helgaas
2020-01-23 10:00 ` Neil Armstrong
2020-01-23 10:00 ` Neil Armstrong
2020-01-23 9:52 ` Jerome Brunet
2020-01-23 9:52 ` Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200116111850.23690-5-repk@triplefau.lt \
--to=repk@triplefau.lt \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=kishon@ti.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=yue.wang@Amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.