All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 02/15] hw/misc: Add the STM32F4xx EXTI device
Date: Fri, 17 Jan 2020 14:28:03 +0000	[thread overview]
Message-ID: <20200117142816.15110-3-peter.maydell@linaro.org> (raw)
In-Reply-To: <20200117142816.15110-1-peter.maydell@linaro.org>

From: Alistair Francis <alistair@alistair23.me>

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ef941d59fd8658589d34ed432e1d6dfdcf7fb1d0.1576658572.git.alistair@alistair23.me
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/misc/Makefile.objs            |   1 +
 include/hw/misc/stm32f4xx_exti.h |  60 ++++++++++
 hw/misc/stm32f4xx_exti.c         | 188 +++++++++++++++++++++++++++++++
 hw/arm/Kconfig                   |   1 +
 hw/misc/Kconfig                  |   3 +
 hw/misc/trace-events             |   5 +
 6 files changed, 258 insertions(+)
 create mode 100644 include/hw/misc/stm32f4xx_exti.h
 create mode 100644 hw/misc/stm32f4xx_exti.c

diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index ea8025e0bb1..c6ecbdd7b0e 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -59,6 +59,7 @@ common-obj-$(CONFIG_ZYNQ) += zynq_slcr.o
 common-obj-$(CONFIG_ZYNQ) += zynq-xadc.o
 common-obj-$(CONFIG_STM32F2XX_SYSCFG) += stm32f2xx_syscfg.o
 common-obj-$(CONFIG_STM32F4XX_SYSCFG) += stm32f4xx_syscfg.o
+common-obj-$(CONFIG_STM32F4XX_EXTI) += stm32f4xx_exti.o
 obj-$(CONFIG_MIPS_CPS) += mips_cmgcr.o
 obj-$(CONFIG_MIPS_CPS) += mips_cpc.o
 obj-$(CONFIG_MIPS_ITU) += mips_itu.o
diff --git a/include/hw/misc/stm32f4xx_exti.h b/include/hw/misc/stm32f4xx_exti.h
new file mode 100644
index 00000000000..707036a41b1
--- /dev/null
+++ b/include/hw/misc/stm32f4xx_exti.h
@@ -0,0 +1,60 @@
+/*
+ * STM32F4XX EXTI
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_STM_EXTI_H
+#define HW_STM_EXTI_H
+
+#include "hw/sysbus.h"
+#include "hw/hw.h"
+
+#define EXTI_IMR   0x00
+#define EXTI_EMR   0x04
+#define EXTI_RTSR  0x08
+#define EXTI_FTSR  0x0C
+#define EXTI_SWIER 0x10
+#define EXTI_PR    0x14
+
+#define TYPE_STM32F4XX_EXTI "stm32f4xx-exti"
+#define STM32F4XX_EXTI(obj) \
+    OBJECT_CHECK(STM32F4xxExtiState, (obj), TYPE_STM32F4XX_EXTI)
+
+#define NUM_GPIO_EVENT_IN_LINES 16
+#define NUM_INTERRUPT_OUT_LINES 16
+
+typedef struct {
+    SysBusDevice parent_obj;
+
+    MemoryRegion mmio;
+
+    uint32_t exti_imr;
+    uint32_t exti_emr;
+    uint32_t exti_rtsr;
+    uint32_t exti_ftsr;
+    uint32_t exti_swier;
+    uint32_t exti_pr;
+
+    qemu_irq irq[NUM_INTERRUPT_OUT_LINES];
+} STM32F4xxExtiState;
+
+#endif
diff --git a/hw/misc/stm32f4xx_exti.c b/hw/misc/stm32f4xx_exti.c
new file mode 100644
index 00000000000..02e78100461
--- /dev/null
+++ b/hw/misc/stm32f4xx_exti.c
@@ -0,0 +1,188 @@
+/*
+ * STM32F4XX EXTI
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "trace.h"
+#include "hw/irq.h"
+#include "migration/vmstate.h"
+#include "hw/misc/stm32f4xx_exti.h"
+
+static void stm32f4xx_exti_reset(DeviceState *dev)
+{
+    STM32F4xxExtiState *s = STM32F4XX_EXTI(dev);
+
+    s->exti_imr = 0x00000000;
+    s->exti_emr = 0x00000000;
+    s->exti_rtsr = 0x00000000;
+    s->exti_ftsr = 0x00000000;
+    s->exti_swier = 0x00000000;
+    s->exti_pr = 0x00000000;
+}
+
+static void stm32f4xx_exti_set_irq(void *opaque, int irq, int level)
+{
+    STM32F4xxExtiState *s = opaque;
+
+    trace_stm32f4xx_exti_set_irq(irq, level);
+
+    if (((1 << irq) & s->exti_rtsr) && level) {
+        /* Rising Edge */
+        s->exti_pr |= 1 << irq;
+    }
+
+    if (((1 << irq) & s->exti_ftsr) && !level) {
+        /* Falling Edge */
+        s->exti_pr |= 1 << irq;
+    }
+
+    if (!((1 << irq) & s->exti_imr)) {
+        /* Interrupt is masked */
+        return;
+    }
+    qemu_irq_pulse(s->irq[irq]);
+}
+
+static uint64_t stm32f4xx_exti_read(void *opaque, hwaddr addr,
+                                     unsigned int size)
+{
+    STM32F4xxExtiState *s = opaque;
+
+    trace_stm32f4xx_exti_read(addr);
+
+    switch (addr) {
+    case EXTI_IMR:
+        return s->exti_imr;
+    case EXTI_EMR:
+        return s->exti_emr;
+    case EXTI_RTSR:
+        return s->exti_rtsr;
+    case EXTI_FTSR:
+        return s->exti_ftsr;
+    case EXTI_SWIER:
+        return s->exti_swier;
+    case EXTI_PR:
+        return s->exti_pr;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "STM32F4XX_exti_read: Bad offset %x\n", (int)addr);
+        return 0;
+    }
+    return 0;
+}
+
+static void stm32f4xx_exti_write(void *opaque, hwaddr addr,
+                       uint64_t val64, unsigned int size)
+{
+    STM32F4xxExtiState *s = opaque;
+    uint32_t value = (uint32_t) val64;
+
+    trace_stm32f4xx_exti_write(addr, value);
+
+    switch (addr) {
+    case EXTI_IMR:
+        s->exti_imr = value;
+        return;
+    case EXTI_EMR:
+        s->exti_emr = value;
+        return;
+    case EXTI_RTSR:
+        s->exti_rtsr = value;
+        return;
+    case EXTI_FTSR:
+        s->exti_ftsr = value;
+        return;
+    case EXTI_SWIER:
+        s->exti_swier = value;
+        return;
+    case EXTI_PR:
+        /* This bit is cleared by writing a 1 to it */
+        s->exti_pr &= ~value;
+        return;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "STM32F4XX_exti_write: Bad offset %x\n", (int)addr);
+    }
+}
+
+static const MemoryRegionOps stm32f4xx_exti_ops = {
+    .read = stm32f4xx_exti_read,
+    .write = stm32f4xx_exti_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void stm32f4xx_exti_init(Object *obj)
+{
+    STM32F4xxExtiState *s = STM32F4XX_EXTI(obj);
+    int i;
+
+    for (i = 0; i < NUM_INTERRUPT_OUT_LINES; i++) {
+        sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq[i]);
+    }
+
+    memory_region_init_io(&s->mmio, obj, &stm32f4xx_exti_ops, s,
+                          TYPE_STM32F4XX_EXTI, 0x400);
+    sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+
+    qdev_init_gpio_in(DEVICE(obj), stm32f4xx_exti_set_irq,
+                      NUM_GPIO_EVENT_IN_LINES);
+}
+
+static const VMStateDescription vmstate_stm32f4xx_exti = {
+    .name = TYPE_STM32F4XX_EXTI,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(exti_imr, STM32F4xxExtiState),
+        VMSTATE_UINT32(exti_emr, STM32F4xxExtiState),
+        VMSTATE_UINT32(exti_rtsr, STM32F4xxExtiState),
+        VMSTATE_UINT32(exti_ftsr, STM32F4xxExtiState),
+        VMSTATE_UINT32(exti_swier, STM32F4xxExtiState),
+        VMSTATE_UINT32(exti_pr, STM32F4xxExtiState),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void stm32f4xx_exti_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->reset = stm32f4xx_exti_reset;
+    dc->vmsd = &vmstate_stm32f4xx_exti;
+}
+
+static const TypeInfo stm32f4xx_exti_info = {
+    .name          = TYPE_STM32F4XX_EXTI,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(STM32F4xxExtiState),
+    .instance_init = stm32f4xx_exti_init,
+    .class_init    = stm32f4xx_exti_class_init,
+};
+
+static void stm32f4xx_exti_register_types(void)
+{
+    type_register_static(&stm32f4xx_exti_info);
+}
+
+type_init(stm32f4xx_exti_register_types)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 4660d147156..3d86691ae0c 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -315,6 +315,7 @@ config STM32F405_SOC
     bool
     select ARM_V7M
     select STM32F4XX_SYSCFG
+    select STM32F4XX_EXTI
 
 config XLNX_ZYNQMP_ARM
     bool
diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
index 72609650b7a..bdd77d80205 100644
--- a/hw/misc/Kconfig
+++ b/hw/misc/Kconfig
@@ -85,6 +85,9 @@ config STM32F2XX_SYSCFG
 config STM32F4XX_SYSCFG
     bool
 
+config STM32F4XX_EXTI
+    bool
+
 config MIPS_ITU
     bool
 
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index 44b4f72f57f..7f0f5dff3a8 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -90,6 +90,11 @@ stm32f4xx_pulse_exti(int irq) "Pulse EXTI: %d"
 stm32f4xx_syscfg_read(uint64_t addr) "reg read: addr: 0x%" PRIx64 " "
 stm32f4xx_syscfg_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" PRIx64 " val: 0x%" PRIx64 ""
 
+# stm32f4xx_exti
+stm32f4xx_exti_set_irq(int irq, int leve) "Set EXTI: %d to %d"
+stm32f4xx_exti_read(uint64_t addr) "reg read: addr: 0x%" PRIx64 " "
+stm32f4xx_exti_write(uint64_t addr, uint64_t data) "reg write: addr: 0x%" PRIx64 " val: 0x%" PRIx64 ""
+
 # tz-mpc.c
 tz_mpc_reg_read(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs read: offset 0x%x data 0x%" PRIx64 " size %u"
 tz_mpc_reg_write(uint32_t offset, uint64_t data, unsigned size) "TZ MPC regs write: offset 0x%x data 0x%" PRIx64 " size %u"
-- 
2.20.1



  parent reply	other threads:[~2020-01-17 14:30 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-17 14:28 [PULL 00/15] target-arm queue Peter Maydell
2020-01-17 14:28 ` [PULL 01/15] hw/misc: Add the STM32F4xx Sysconfig device Peter Maydell
2020-01-17 14:28 ` Peter Maydell [this message]
2020-01-17 14:28 ` [PULL 03/15] hw/arm: Add the STM32F4xx SoC Peter Maydell
2020-01-17 14:28 ` [PULL 04/15] hw/arm: Add the Netduino Plus 2 Peter Maydell
2020-01-17 14:28 ` [PULL 05/15] tests/boot_linux_console: Add initrd test for the CubieBoard Peter Maydell
2020-01-17 14:28 ` [PULL 06/15] tests/boot_linux_console: Add a SD card " Peter Maydell
2020-01-17 14:28 ` [PULL 07/15] hw/arm/allwinner-a10: Move SoC definitions out of header Peter Maydell
2020-01-17 14:28 ` [PULL 08/15] hw/arm/allwinner-a10: Simplify by passing IRQs with qdev_pass_gpios() Peter Maydell
2020-01-17 14:28 ` [PULL 09/15] hw/arm/allwinner-a10: Remove local qemu_irq variables Peter Maydell
2020-01-17 14:28 ` [PULL 10/15] target/arm/arm-semi: fix SYS_OPEN to return nonzero filehandle Peter Maydell
2020-01-17 14:28 ` [PULL 11/15] i.MX: add an emulation for RNGC Peter Maydell
2020-01-17 14:28 ` [PULL 12/15] target/arm: adjust program counter for wfi exception in AArch32 Peter Maydell
2020-01-17 14:28 ` [PULL 13/15] arm/gicv3: update virtual irq state after IAR register read Peter Maydell
2020-01-17 14:28 ` [PULL 14/15] target/arm: Return correct IL bit in merge_syn_data_abort Peter Maydell
2020-01-17 14:28 ` [PULL 15/15] target/arm: Set ISSIs16Bit in make_issinfo Peter Maydell
2020-01-17 18:03 ` [PULL 00/15] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200117142816.15110-3-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.