From: Wei Yang <richardw.yang@linux.intel.com>
To: Baoquan He <bhe@redhat.com>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
akpm@linux-foundation.org, richardw.yang@linux.intel.com,
david@redhat.com, osalvador@suse.de, dan.j.williams@intel.com,
mhocko@suse.com, rppt@linux.ibm.com, robin.murphy@arm.com
Subject: Re: [PATCH v2 6/7] mm/sparse.c: move subsection_map related codes together
Date: Thu, 20 Feb 2020 14:18:32 +0800 [thread overview]
Message-ID: <20200220061832.GE32521@richard> (raw)
In-Reply-To: <20200220043316.19668-7-bhe@redhat.com>
On Thu, Feb 20, 2020 at 12:33:15PM +0800, Baoquan He wrote:
>No functional change.
>
Those functions are introduced in your previous patches.
Is it possible to define them close to each other at the very beginning?
>Signed-off-by: Baoquan He <bhe@redhat.com>
>---
> mm/sparse.c | 172 +++++++++++++++++++++++++---------------------------
> 1 file changed, 84 insertions(+), 88 deletions(-)
>
>diff --git a/mm/sparse.c b/mm/sparse.c
>index 14bff0b44e7c..053d6c2e5c1f 100644
>--- a/mm/sparse.c
>+++ b/mm/sparse.c
>@@ -244,10 +244,94 @@ void __init subsection_map_init(unsigned long pfn, unsigned long nr_pages)
> nr_pages -= pfns;
> }
> }
>+
>+/**
>+ * clear_subsection_map - Clear subsection map of one memory region
>+ *
>+ * @pfn - start pfn of the memory range
>+ * @nr_pages - number of pfns to add in the region
>+ *
>+ * This is only intended for hotplug, and clear the related subsection
>+ * map inside one section.
>+ *
>+ * Return:
>+ * * -EINVAL - Section already deactived.
>+ * * 0 - Subsection map is emptied.
>+ * * 1 - Subsection map is not empty.
>+ */
>+static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
>+{
>+ DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
>+ DECLARE_BITMAP(tmp, SUBSECTIONS_PER_SECTION) = { 0 };
>+ struct mem_section *ms = __pfn_to_section(pfn);
>+ unsigned long *subsection_map = ms->usage
>+ ? &ms->usage->subsection_map[0] : NULL;
>+
>+ subsection_mask_set(map, pfn, nr_pages);
>+ if (subsection_map)
>+ bitmap_and(tmp, map, subsection_map, SUBSECTIONS_PER_SECTION);
>+
>+ if (WARN(!subsection_map || !bitmap_equal(tmp, map, SUBSECTIONS_PER_SECTION),
>+ "section already deactivated (%#lx + %ld)\n",
>+ pfn, nr_pages))
>+ return -EINVAL;
>+
>+ bitmap_xor(subsection_map, map, subsection_map, SUBSECTIONS_PER_SECTION);
>+
>+ if (bitmap_empty(subsection_map, SUBSECTIONS_PER_SECTION))
>+ return 0;
>+
>+ return 1;
>+}
>+
>+/**
>+ * fill_subsection_map - fill subsection map of a memory region
>+ * @pfn - start pfn of the memory range
>+ * @nr_pages - number of pfns to add in the region
>+ *
>+ * This fills the related subsection map inside one section, and only
>+ * intended for hotplug.
>+ *
>+ * Return:
>+ * * 0 - On success.
>+ * * -EINVAL - Invalid memory region.
>+ * * -EEXIST - Subsection map has been set.
>+ */
>+static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
>+{
>+ struct mem_section *ms = __pfn_to_section(pfn);
>+ DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
>+ unsigned long *subsection_map;
>+ int rc = 0;
>+
>+ subsection_mask_set(map, pfn, nr_pages);
>+
>+ subsection_map = &ms->usage->subsection_map[0];
>+
>+ if (bitmap_empty(map, SUBSECTIONS_PER_SECTION))
>+ rc = -EINVAL;
>+ else if (bitmap_intersects(map, subsection_map, SUBSECTIONS_PER_SECTION))
>+ rc = -EEXIST;
>+ else
>+ bitmap_or(subsection_map, map, subsection_map,
>+ SUBSECTIONS_PER_SECTION);
>+
>+ return rc;
>+}
> #else
> void __init subsection_map_init(unsigned long pfn, unsigned long nr_pages)
> {
> }
>+
>+static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
>+{
>+ return 0;
>+}
>+
>+static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
>+{
>+ return 0;
>+}
> #endif
>
> /* Record a memory area against a node. */
>@@ -732,52 +816,6 @@ static void free_map_bootmem(struct page *memmap)
> }
> #endif /* CONFIG_SPARSEMEM_VMEMMAP */
>
>-#ifdef CONFIG_SPARSEMEM_VMEMMAP
>-/**
>- * clear_subsection_map - Clear subsection map of one memory region
>- *
>- * @pfn - start pfn of the memory range
>- * @nr_pages - number of pfns to add in the region
>- *
>- * This is only intended for hotplug, and clear the related subsection
>- * map inside one section.
>- *
>- * Return:
>- * * -EINVAL - Section already deactived.
>- * * 0 - Subsection map is emptied.
>- * * 1 - Subsection map is not empty.
>- */
>-static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
>-{
>- DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
>- DECLARE_BITMAP(tmp, SUBSECTIONS_PER_SECTION) = { 0 };
>- struct mem_section *ms = __pfn_to_section(pfn);
>- unsigned long *subsection_map = ms->usage
>- ? &ms->usage->subsection_map[0] : NULL;
>-
>- subsection_mask_set(map, pfn, nr_pages);
>- if (subsection_map)
>- bitmap_and(tmp, map, subsection_map, SUBSECTIONS_PER_SECTION);
>-
>- if (WARN(!subsection_map || !bitmap_equal(tmp, map, SUBSECTIONS_PER_SECTION),
>- "section already deactivated (%#lx + %ld)\n",
>- pfn, nr_pages))
>- return -EINVAL;
>-
>- bitmap_xor(subsection_map, map, subsection_map, SUBSECTIONS_PER_SECTION);
>-
>- if (bitmap_empty(subsection_map, SUBSECTIONS_PER_SECTION))
>- return 0;
>-
>- return 1;
>-}
>-#else
>-static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
>-{
>- return 0;
>-}
>-#endif
>-
> /*
> * To deactivate a memory region, there are 3 cases to handle across
> * two configurations (SPARSEMEM_VMEMMAP={y,n}):
>@@ -833,48 +871,6 @@ static void section_deactivate(unsigned long pfn, unsigned long nr_pages,
> ms->section_mem_map = (unsigned long)NULL;
> }
>
>-#ifdef CONFIG_SPARSEMEM_VMEMMAP
>-/**
>- * fill_subsection_map - fill subsection map of a memory region
>- * @pfn - start pfn of the memory range
>- * @nr_pages - number of pfns to add in the region
>- *
>- * This fills the related subsection map inside one section, and only
>- * intended for hotplug.
>- *
>- * Return:
>- * * 0 - On success.
>- * * -EINVAL - Invalid memory region.
>- * * -EEXIST - Subsection map has been set.
>- */
>-static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
>-{
>- struct mem_section *ms = __pfn_to_section(pfn);
>- DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
>- unsigned long *subsection_map;
>- int rc = 0;
>-
>- subsection_mask_set(map, pfn, nr_pages);
>-
>- subsection_map = &ms->usage->subsection_map[0];
>-
>- if (bitmap_empty(map, SUBSECTIONS_PER_SECTION))
>- rc = -EINVAL;
>- else if (bitmap_intersects(map, subsection_map, SUBSECTIONS_PER_SECTION))
>- rc = -EEXIST;
>- else
>- bitmap_or(subsection_map, map, subsection_map,
>- SUBSECTIONS_PER_SECTION);
>-
>- return rc;
>-}
>-#else
>-static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
>-{
>- return 0;
>-}
>-#endif
>-
> static struct page * __meminit section_activate(int nid, unsigned long pfn,
> unsigned long nr_pages, struct vmem_altmap *altmap)
> {
>--
>2.17.2
--
Wei Yang
Help you, Help me
next prev parent reply other threads:[~2020-02-20 6:18 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-20 4:33 [PATCH v2 0/7] mm/hotplug: Only use subsection map in VMEMMAP case Baoquan He
2020-02-20 4:33 ` [PATCH v2 1/7] mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case Baoquan He
2020-02-20 6:11 ` Wei Yang
2020-02-20 12:07 ` David Hildenbrand
2020-02-26 12:31 ` David Hildenbrand
2020-02-26 13:07 ` Baoquan He
2020-02-26 18:09 ` Dan Williams
2020-02-26 18:09 ` Dan Williams
2020-03-03 8:34 ` David Hildenbrand
2020-03-03 8:39 ` Baoquan He
2020-02-20 4:33 ` [PATCH v2 2/7] mm/sparse.c: introduce new function fill_subsection_map() Baoquan He
2020-02-20 6:14 ` Wei Yang
2020-02-28 14:27 ` David Hildenbrand
2020-03-01 4:59 ` Baoquan He
2020-02-20 4:33 ` [PATCH v2 3/7] mm/sparse.c: introduce a new function clear_subsection_map() Baoquan He
2020-02-20 6:15 ` Wei Yang
2020-02-28 14:36 ` David Hildenbrand
2020-03-01 5:20 ` Baoquan He
2020-03-02 15:43 ` David Hildenbrand
2020-03-03 1:53 ` Baoquan He
2020-03-03 8:22 ` Baoquan He
2020-03-03 8:33 ` David Hildenbrand
2020-03-03 8:38 ` Baoquan He
2020-02-20 4:33 ` [PATCH v2 4/7] mm/sparse.c: only use subsection map in VMEMMAP case Baoquan He
2020-02-20 6:17 ` Wei Yang
2020-02-25 9:57 ` Michal Hocko
2020-02-26 3:53 ` Baoquan He
2020-02-26 9:10 ` Michal Hocko
2020-02-28 7:25 ` Baoquan He
2020-02-20 4:33 ` [PATCH v2 5/7] mm/sparse.c: add code comment about sub-section hotplug Baoquan He
2020-02-20 4:33 ` [PATCH v2 6/7] mm/sparse.c: move subsection_map related codes together Baoquan He
2020-02-20 6:18 ` Wei Yang [this message]
2020-02-20 7:04 ` Baoquan He
2020-02-20 7:12 ` Wei Yang
2020-02-20 8:55 ` Baoquan He
2020-02-20 21:52 ` Wei Yang
2020-02-20 4:33 ` [PATCH v2 7/7] mm/sparse.c: Use __get_free_pages() instead in populate_section_memmap() Baoquan He
2020-02-20 10:38 ` [PATCH v2 0/7] mm/hotplug: Only use subsection map in VMEMMAP case Michal Hocko
2020-02-21 14:28 ` Baoquan He
2020-02-25 9:10 ` David Hildenbrand
2020-02-25 10:02 ` Michal Hocko
2020-02-26 3:42 ` Baoquan He
2020-02-26 9:14 ` Michal Hocko
2020-02-26 12:30 ` Baoquan He
2020-02-25 10:03 ` Michal Hocko
2020-02-26 3:44 ` Baoquan He
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200220061832.GE32521@richard \
--to=richardw.yang@linux.intel.com \
--cc=akpm@linux-foundation.org \
--cc=bhe@redhat.com \
--cc=dan.j.williams@intel.com \
--cc=david@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=osalvador@suse.de \
--cc=robin.murphy@arm.com \
--cc=rppt@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.