From: Rob Herring <robh@kernel.org> To: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Paul Cercueil <paul@crapouillou.net>, Paul Boddie <paul@boddie.org.uk>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, Mark Rutland <mark.rutland@arm.com>, Ralf Baechle <ralf@linux-mips.org>, Paul Burton <paulburton@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Andi Kleen <ak@linux.intel.com>, Krzysztof Kozlowski <krzk@kernel.org>, Geert Uytterhoeven <geert+renesas@glider.be>, "Eric W. Biederman" <ebiederm@xmission.com>, dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org, linux-gpio@vger.kernel.org, letux-kernel@openphoenux.org, kernel@pyra-handheld.com, Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Subject: Re: [RFC 1/8] dt-bindings: video: Add jz4780-lcd binding Date: Tue, 3 Mar 2020 08:42:40 -0600 [thread overview] Message-ID: <20200303144240.GB24762@bogus> (raw) In-Reply-To: <d7dd7c52a9f6cb4e31bce69bb6879e46bfba530c.1582744379.git.hns@goldelico.com> On Wed, Feb 26, 2020 at 08:12:53PM +0100, H. Nikolaus Schaller wrote: > From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> > > Add DT bindings for the LCD controller on the jz4780 SoC > > Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> > --- > .../bindings/display/ingenic-jz4780-lcd.txt | 39 +++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/ingenic-jz4780-lcd.txt > > diff --git a/Documentation/devicetree/bindings/display/ingenic-jz4780-lcd.txt b/Documentation/devicetree/bindings/display/ingenic-jz4780-lcd.txt > new file mode 100644 > index 000000000000..8512ce3f93df > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/ingenic-jz4780-lcd.txt > @@ -0,0 +1,39 @@ > +Bindings for Ingenic JZ4780 LCD Controller > + > +LCD Controller is the Display Controller for the Ingenic JZ4780 SoC > + > +Required properties: > +- compatible: should be "ingenic,jz4780-lcd" > +- reg: Should contain the address & size of the LCD controller registers. > +- interrupts: Should specify the interrupt provided by parent. > +- clocks: Should contain two clock specifiers for the JZ4780_CLK_TVE JZ4780_CLK_LCD0PIXCLK. > +- clock-names : Must be "lcd_clk", "lcd_pixclk"; > +- port: A port node with endpoint definitions as defined in > + Documentation/devicetree/bindings/media/video-interfaces.txt. > + > +Optional properties: > +- interrupt-parent: phandle to parent interrupt controller Drop this. 'interrupt-parent' is always valid and could be in a parent node. > + > +Example: > + > +lcd: jz4780-lcdk@0x13050000 { Drop the '0x'. > + compatible = "ingenic,jz4780-lcd"; > + reg = <0x13050000 0x1800>; > + > + clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>; > + clock-names = "lcd_clk", "lcd_pixclk"; > + > + interrupt-parent = <&intc>; > + interrupts = <31>; > + > + jz4780_lcd_out: port { > + #address-cells = <1>; > + #size-cells = <0>; > + > + jz4780_out_hdmi: endpoint@0 { > + reg = <0>; Don't need an address as there's only 1 endpoint. > + remote-endpoint = <&hdmi_in_lcd>; > + }; > + }; > + > +}; > -- > 2.23.0 >
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org> To: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Paul Boddie <paul@boddie.org.uk>, Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>, Geert Uytterhoeven <geert+renesas@glider.be>, Paul Burton <paulburton@kernel.org>, David Airlie <airlied@linux.ie>, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org, Ralf Baechle <ralf@linux-mips.org>, linux-mips@vger.kernel.org, Paul Cercueil <paul@crapouillou.net>, linux-gpio@vger.kernel.org, Andi Kleen <ak@linux.intel.com>, Krzysztof Kozlowski <krzk@kernel.org>, kernel@pyra-handheld.com, letux-kernel@openphoenux.org, "Eric W. Biederman" <ebiederm@xmission.com> Subject: Re: [RFC 1/8] dt-bindings: video: Add jz4780-lcd binding Date: Tue, 3 Mar 2020 08:42:40 -0600 [thread overview] Message-ID: <20200303144240.GB24762@bogus> (raw) In-Reply-To: <d7dd7c52a9f6cb4e31bce69bb6879e46bfba530c.1582744379.git.hns@goldelico.com> On Wed, Feb 26, 2020 at 08:12:53PM +0100, H. Nikolaus Schaller wrote: > From: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> > > Add DT bindings for the LCD controller on the jz4780 SoC > > Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> > --- > .../bindings/display/ingenic-jz4780-lcd.txt | 39 +++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/ingenic-jz4780-lcd.txt > > diff --git a/Documentation/devicetree/bindings/display/ingenic-jz4780-lcd.txt b/Documentation/devicetree/bindings/display/ingenic-jz4780-lcd.txt > new file mode 100644 > index 000000000000..8512ce3f93df > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/ingenic-jz4780-lcd.txt > @@ -0,0 +1,39 @@ > +Bindings for Ingenic JZ4780 LCD Controller > + > +LCD Controller is the Display Controller for the Ingenic JZ4780 SoC > + > +Required properties: > +- compatible: should be "ingenic,jz4780-lcd" > +- reg: Should contain the address & size of the LCD controller registers. > +- interrupts: Should specify the interrupt provided by parent. > +- clocks: Should contain two clock specifiers for the JZ4780_CLK_TVE JZ4780_CLK_LCD0PIXCLK. > +- clock-names : Must be "lcd_clk", "lcd_pixclk"; > +- port: A port node with endpoint definitions as defined in > + Documentation/devicetree/bindings/media/video-interfaces.txt. > + > +Optional properties: > +- interrupt-parent: phandle to parent interrupt controller Drop this. 'interrupt-parent' is always valid and could be in a parent node. > + > +Example: > + > +lcd: jz4780-lcdk@0x13050000 { Drop the '0x'. > + compatible = "ingenic,jz4780-lcd"; > + reg = <0x13050000 0x1800>; > + > + clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>; > + clock-names = "lcd_clk", "lcd_pixclk"; > + > + interrupt-parent = <&intc>; > + interrupts = <31>; > + > + jz4780_lcd_out: port { > + #address-cells = <1>; > + #size-cells = <0>; > + > + jz4780_out_hdmi: endpoint@0 { > + reg = <0>; Don't need an address as there's only 1 endpoint. > + remote-endpoint = <&hdmi_in_lcd>; > + }; > + }; > + > +}; > -- > 2.23.0 > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-03-03 14:42 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-26 19:12 [RFC 0/8] MIPS: CI20: add HDMI out support H. Nikolaus Schaller 2020-02-26 19:12 ` H. Nikolaus Schaller 2020-02-26 19:12 ` [RFC 1/8] dt-bindings: video: Add jz4780-lcd binding H. Nikolaus Schaller 2020-02-26 19:12 ` H. Nikolaus Schaller 2020-03-03 14:42 ` Rob Herring [this message] 2020-03-03 14:42 ` Rob Herring 2020-02-26 19:12 ` [RFC 2/8] dt-bindings: video: Add jz4780-hdmi binding H. Nikolaus Schaller 2020-02-26 19:12 ` H. Nikolaus Schaller 2020-03-03 14:40 ` Rob Herring 2020-03-03 14:40 ` Rob Herring 2020-02-26 19:12 ` [RFC 3/8] drm: ingenic-drm: add MODULE_DEVICE_TABLE H. Nikolaus Schaller 2020-02-26 19:12 ` H. Nikolaus Schaller 2020-02-26 19:12 ` [RFC 4/8] drm: ingenic: add jz4780 Synopsys HDMI driver H. Nikolaus Schaller 2020-02-26 19:12 ` H. Nikolaus Schaller 2020-02-26 19:12 ` [RFC 5/8] pinctrl: ingenic: add hdmi-ddc pin control group H. Nikolaus Schaller 2020-02-26 19:12 ` H. Nikolaus Schaller 2020-02-26 19:12 ` [RFC 6/8] MIPS: DTS: jz4780: account for Synopsys HDMI driver and LCD controller H. Nikolaus Schaller 2020-02-26 19:12 ` H. Nikolaus Schaller 2020-02-26 19:12 ` [RFC 7/8] MIPS: DTS: CI20: add HDMI setup H. Nikolaus Schaller 2020-02-26 19:12 ` H. Nikolaus Schaller 2020-02-26 19:13 ` [RFC 8/8] MIPS: CI20: defconfig: configure for DRM_DW_HDMI_JZ4780 H. Nikolaus Schaller 2020-02-26 19:13 ` H. Nikolaus Schaller 2020-02-27 12:23 ` [RFC 0/8] MIPS: CI20: add HDMI out support Sam Ravnborg 2020-02-27 12:23 ` Sam Ravnborg 2020-02-27 12:56 ` H. Nikolaus Schaller 2020-02-27 12:56 ` H. Nikolaus Schaller 2020-02-27 16:57 ` Sam Ravnborg 2020-02-27 16:57 ` Sam Ravnborg 2020-02-27 17:02 ` H. Nikolaus Schaller 2020-02-27 17:02 ` H. Nikolaus Schaller 2020-03-03 14:58 ` Rob Herring 2020-03-03 14:58 ` Rob Herring 2020-03-03 15:19 ` H. Nikolaus Schaller 2020-03-03 15:19 ` H. Nikolaus Schaller
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200303144240.GB24762@bogus \ --to=robh@kernel.org \ --cc=Zubair.Kakakhel@imgtec.com \ --cc=airlied@linux.ie \ --cc=ak@linux.intel.com \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=ebiederm@xmission.com \ --cc=geert+renesas@glider.be \ --cc=hns@goldelico.com \ --cc=kernel@pyra-handheld.com \ --cc=krzk@kernel.org \ --cc=letux-kernel@openphoenux.org \ --cc=linus.walleij@linaro.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mips@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=paul@boddie.org.uk \ --cc=paul@crapouillou.net \ --cc=paulburton@kernel.org \ --cc=ralf@linux-mips.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.