From: "Ondřej Jirman" <megous@megous.com>
To: Icenowy Zheng <icenowy@aosc.io>
Cc: Thierry Reding <thierry.reding@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>, Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@googlegroups.com
Subject: Re: [PATCH v2 3/5] drm: panel: add Xingbangda XBD599 panel
Date: Mon, 16 Mar 2020 20:11:22 +0100 [thread overview]
Message-ID: <20200316191122.yeb5l22ldtt73vx5@core.my.home> (raw)
In-Reply-To: <20200316133503.144650-4-icenowy@aosc.io>
Hello Icenowy,
On Mon, Mar 16, 2020 at 09:35:01PM +0800, Icenowy Zheng wrote:
> Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI IPS LCD panel made by
> Xingbangda, which is used on PinePhone final assembled phones.
>
> [snip]
>
> +static const struct drm_display_mode xbd599_default_mode = {
> + .hdisplay = 720,
> + .hsync_start = 720 + 40,
> + .hsync_end = 720 + 40 + 40,
> + .htotal = 720 + 40 + 40 + 40,
> + .vdisplay = 1440,
> + .vsync_start = 1440 + 18,
> + .vsync_end = 1440 + 18 + 10,
> + .vtotal = 1440 + 18 + 10 + 17,
> + .vrefresh = 60,
Does the display actually run for you at 60fps? I measured 36.63 FPS with
a DRM app that just does DRM_IOCTL_MODE_ATOMIC update after each
DRM_EVENT_FLIP_COMPLETE event.
thank you and regards,
o.
> + .clock = 69000,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +
> + .width_mm = 68,
> + .height_mm = 136,
> + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> +};
> +
WARNING: multiple messages have this Message-ID (diff)
From: "Ondřej Jirman" <megous@megous.com>
To: Icenowy Zheng <icenowy@aosc.io>
Cc: devicetree@vger.kernel.org, linux-sunxi@googlegroups.com,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Thierry Reding <thierry.reding@gmail.com>,
Maxime Ripard <mripard@kernel.org>,
Sam Ravnborg <sam@ravnborg.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 3/5] drm: panel: add Xingbangda XBD599 panel
Date: Mon, 16 Mar 2020 20:11:22 +0100 [thread overview]
Message-ID: <20200316191122.yeb5l22ldtt73vx5@core.my.home> (raw)
In-Reply-To: <20200316133503.144650-4-icenowy@aosc.io>
Hello Icenowy,
On Mon, Mar 16, 2020 at 09:35:01PM +0800, Icenowy Zheng wrote:
> Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI IPS LCD panel made by
> Xingbangda, which is used on PinePhone final assembled phones.
>
> [snip]
>
> +static const struct drm_display_mode xbd599_default_mode = {
> + .hdisplay = 720,
> + .hsync_start = 720 + 40,
> + .hsync_end = 720 + 40 + 40,
> + .htotal = 720 + 40 + 40 + 40,
> + .vdisplay = 1440,
> + .vsync_start = 1440 + 18,
> + .vsync_end = 1440 + 18 + 10,
> + .vtotal = 1440 + 18 + 10 + 17,
> + .vrefresh = 60,
Does the display actually run for you at 60fps? I measured 36.63 FPS with
a DRM app that just does DRM_IOCTL_MODE_ATOMIC update after each
DRM_EVENT_FLIP_COMPLETE event.
thank you and regards,
o.
> + .clock = 69000,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +
> + .width_mm = 68,
> + .height_mm = 136,
> + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> +};
> +
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: "Ondřej Jirman" <megous@megous.com>
To: Icenowy Zheng <icenowy@aosc.io>
Cc: devicetree@vger.kernel.org, linux-sunxi@googlegroups.com,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Rob Herring <robh+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Thierry Reding <thierry.reding@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 3/5] drm: panel: add Xingbangda XBD599 panel
Date: Mon, 16 Mar 2020 20:11:22 +0100 [thread overview]
Message-ID: <20200316191122.yeb5l22ldtt73vx5@core.my.home> (raw)
In-Reply-To: <20200316133503.144650-4-icenowy@aosc.io>
Hello Icenowy,
On Mon, Mar 16, 2020 at 09:35:01PM +0800, Icenowy Zheng wrote:
> Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI IPS LCD panel made by
> Xingbangda, which is used on PinePhone final assembled phones.
>
> [snip]
>
> +static const struct drm_display_mode xbd599_default_mode = {
> + .hdisplay = 720,
> + .hsync_start = 720 + 40,
> + .hsync_end = 720 + 40 + 40,
> + .htotal = 720 + 40 + 40 + 40,
> + .vdisplay = 1440,
> + .vsync_start = 1440 + 18,
> + .vsync_end = 1440 + 18 + 10,
> + .vtotal = 1440 + 18 + 10 + 17,
> + .vrefresh = 60,
Does the display actually run for you at 60fps? I measured 36.63 FPS with
a DRM app that just does DRM_IOCTL_MODE_ATOMIC update after each
DRM_EVENT_FLIP_COMPLETE event.
thank you and regards,
o.
> + .clock = 69000,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +
> + .width_mm = 68,
> + .height_mm = 136,
> + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> +};
> +
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-03-16 19:11 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-16 13:34 [PATCH v2 0/5] Add support for PinePhone LCD panel Icenowy Zheng
2020-03-16 13:34 ` Icenowy Zheng
2020-03-16 13:34 ` Icenowy Zheng
2020-03-16 13:34 ` [PATCH v2 1/5] dt-bindings: vendor-prefixes: Add Xingbangda Icenowy Zheng
2020-03-16 13:34 ` Icenowy Zheng
2020-03-16 13:34 ` Icenowy Zheng
2020-03-16 13:35 ` [PATCH v2 2/5] dt-bindings: panel: add binding for Xingbangda XBD599 panel Icenowy Zheng
2020-03-16 13:35 ` Icenowy Zheng
2020-03-16 13:35 ` Icenowy Zheng
2020-03-19 14:14 ` Linus Walleij
2020-03-19 14:14 ` Linus Walleij
2020-03-19 14:14 ` Linus Walleij
2020-03-20 7:58 ` Icenowy Zheng
2020-03-20 7:58 ` Icenowy Zheng
2020-03-20 7:58 ` Icenowy Zheng
2020-03-20 9:11 ` Linus Walleij
2020-03-20 9:11 ` Linus Walleij
2020-03-20 9:11 ` Linus Walleij
2020-03-20 9:21 ` Icenowy Zheng
2020-03-20 9:21 ` Icenowy Zheng
2020-03-20 9:21 ` Icenowy Zheng
2020-03-16 13:35 ` [PATCH v2 3/5] drm: panel: add " Icenowy Zheng
2020-03-16 13:35 ` Icenowy Zheng
2020-03-16 13:35 ` Icenowy Zheng
2020-03-16 19:11 ` Ondřej Jirman [this message]
2020-03-16 19:11 ` Ondřej Jirman
2020-03-16 19:11 ` Ondřej Jirman
2020-03-19 14:08 ` Linus Walleij
2020-03-19 14:08 ` Linus Walleij
2020-03-19 14:08 ` Linus Walleij
2020-03-20 9:18 ` Linus Walleij
2020-03-20 9:18 ` Linus Walleij
2020-03-20 9:18 ` Linus Walleij
2020-03-16 13:35 ` [PATCH v2 4/5] drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation Icenowy Zheng
2020-03-16 13:35 ` Icenowy Zheng
2020-03-16 13:35 ` Icenowy Zheng
2020-03-19 9:54 ` Maxime Ripard
2020-03-19 9:54 ` Maxime Ripard
2020-03-19 9:54 ` Maxime Ripard
2020-03-16 13:35 ` [PATCH v2 5/5] arm64: allwinner: dts: a64: add LCD-related device nodes for PinePhone Icenowy Zheng
2020-03-16 13:35 ` Icenowy Zheng
2020-03-16 13:35 ` Icenowy Zheng
2020-03-19 14:51 ` [linux-sunxi] " Icenowy Zheng
2020-03-19 14:51 ` Icenowy Zheng
2020-03-19 14:51 ` Icenowy Zheng
2020-03-19 16:10 ` Ondřej Jirman
2020-03-19 16:10 ` Ondřej Jirman
2020-03-19 16:10 ` Ondřej Jirman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200316191122.yeb5l22ldtt73vx5@core.my.home \
--to=megous@megous.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=icenowy@aosc.io \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.