From: Rob Herring <robh@kernel.org> To: Lubomir Rintel <lkundrak@v3.sk> Cc: Linus Walleij <linus.walleij@linaro.org>, Bartosz Golaszewski <bgolaszewski@baylibre.com>, Thomas Gleixner <tglx@linutronix.de>, Jason Cooper <jason@lakedaemon.net>, Marc Zyngier <maz@kernel.org>, Mauro Carvalho Chehab <mchehab@kernel.org>, Ulf Hansson <ulf.hansson@linaro.org>, Kishon Vijay Abraham I <kishon@ti.com>, Alessandro Zummo <a.zummo@towertech.it>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Mark Brown <broonie@kernel.org>, Daniel Lezcano <daniel.lezcano@linaro.org>, Andrew Lunn <andrew@lunn.ch>, Gregory Clement <gregory.clement@bootlin.com>, Daniel Mack <daniel@zonque.org>, Haojian Zhuang <haojian.zhuang@gmail.com>, Robert Jarzmik <robert.jarzmik@free.fr>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org, linux-media@vger.kernel.org, linux-mmc@vger.kernel.org, linux-rtc@vger.kernel.org, linux-serial@vger.kernel.org, linux-spi@vger.kernel.org, linux-usb@vger.kernel.org Subject: Re: [PATCH 21/28] dt-bindings: gpio: Convert mrvl-gpio to json-schema Date: Fri, 27 Mar 2020 13:28:20 -0600 [thread overview] Message-ID: <20200327192820.GA8577@bogus> (raw) In-Reply-To: <20200317093922.20785-22-lkundrak@v3.sk> On Tue, Mar 17, 2020 at 10:39:15AM +0100, Lubomir Rintel wrote: > This converts the mrvl-gpio binding to DT schema format using json-schema. > > Various fixes were done during the conversion, such as adding more > properties that are in fact mandatory or extending the examples to > include child nodes with extra GPIO blocks. Ugg, not how I would have done this. Differences in register layout should be implied by the compatible strings. But I guess we have to live with it now. > The compatible strings are a mess. It is not clear why so many of them > are needed; the driver doesn't really seem to differentiate between the > models. Some of them, like marvell,pxa93x-gpio and marvell,pxa1928-gpio > are not used at all, so it's not known how many interrupts they utilize. > On the other hand, mrvl,pxa-gpio has been seen in the tree, but it > doesn't end up in any actual DTB file. I added pxa1928 and then work on it ended. I think it is safe to remove, but I dug up dts file and it is 1 irq. > In any case -- the schema merely copies whatever was in the original > binding document, so it's hopefully no more wrong that the original. > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> > --- > .../devicetree/bindings/gpio/mrvl-gpio.txt | 48 ----- > .../devicetree/bindings/gpio/mrvl-gpio.yaml | 173 ++++++++++++++++++ > 2 files changed, 173 insertions(+), 48 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.txt > create mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml > > diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt > deleted file mode 100644 > index 30fd2201b3d4c..0000000000000 > --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt > +++ /dev/null > @@ -1,48 +0,0 @@ > -* Marvell PXA GPIO controller > - > -Required properties: > -- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio", > - "intel,pxa27x-gpio", "intel,pxa3xx-gpio", > - "marvell,pxa93x-gpio", "marvell,mmp-gpio", > - "marvell,mmp2-gpio" or marvell,pxa1928-gpio. > -- reg : Address and length of the register set for the device > -- interrupts : Should be the port interrupt shared by all gpio pins. > - There're three gpio interrupts in arch-pxa, and they're gpio0, > - gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp, > - gpio_mux. > -- interrupt-names : Should be the names of irq resources. Each interrupt > - uses its own interrupt name, so there should be as many interrupt names > - as referenced interrupts. > -- interrupt-controller : Identifies the node as an interrupt controller. > -- #interrupt-cells: Specifies the number of cells needed to encode an > - interrupt source. > -- gpio-controller : Marks the device node as a gpio controller. > -- #gpio-cells : Should be two. The first cell is the pin number and > - the second cell is used to specify flags. See gpio.txt for possible > - values. > - > -Example for a MMP platform: > - > - gpio: gpio@d4019000 { > - compatible = "marvell,mmp-gpio"; > - reg = <0xd4019000 0x1000>; > - interrupts = <49>; > - interrupt-names = "gpio_mux"; > - gpio-controller; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <1>; > - }; > - > -Example for a PXA3xx platform: > - > - gpio: gpio@40e00000 { > - compatible = "intel,pxa3xx-gpio"; > - reg = <0x40e00000 0x10000>; > - interrupt-names = "gpio0", "gpio1", "gpio_mux"; > - interrupts = <8 9 10>; > - gpio-controller; > - #gpio-cells = <0x2>; > - interrupt-controller; > - #interrupt-cells = <0x2>; > - }; > diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml > new file mode 100644 > index 0000000000000..5c713bf59b06d > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml > @@ -0,0 +1,173 @@ > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/gpio/mrvl-gpio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Marvell PXA GPIO controller > + > +maintainers: > + - devicetree@vger.kernel.org Needs to be a real person that cares about this h/w. > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + enum: > + - intel,pxa25x-gpio > + - intel,pxa26x-gpio > + - intel,pxa27x-gpio > + - intel,pxa3xx-gpio > + then: > + properties: > + interrupts: > + minItems: 3 > + maxItems: 3 > + interrupt-names: > + items: > + - const: gpio0 > + - const: gpio1 > + - const: gpio_mux > + - if: > + properties: > + compatible: > + contains: > + enum: > + - marvell,mmp-gpio > + - marvell,mmp2-gpio I'd make this an else clause. > + then: > + properties: > + interrupts: > + maxItems: 1 > + interrupt-names: > + items: > + - const: gpio_mux > + > +properties: > + $nodename: > + pattern: '^gpio@[0-9a-f]+$' > + > + compatible: > + enum: > + - intel,pxa25x-gpio > + - intel,pxa26x-gpio > + - intel,pxa27x-gpio > + - intel,pxa3xx-gpio > + - marvell,mmp-gpio > + - marvell,mmp2-gpio > + - marvell,pxa93x-gpio > + - marvell,pxa1928-gpio > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + resets: > + maxItems: 1 > + > + ranges: true > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 1 > + > + gpio-controller: true > + > + '#gpio-cells': > + const: 2 > + > + gpio-ranges: > + maxItems: 1 My pxa1928 dts has this in the child nodes. Sure this is right? > + > + interrupts: true > + > + interrupt-names: true > + > + interrupt-controller: true > + > + '#interrupt-cells': > + const: 2 > + > +patternProperties: > + '^gpio@[0-9a-f]*$': > + type: object > + properties: > + reg: > + maxItems: 1 > + > + required: > + - reg > + > + additionalProperties: false > + > +required: > + - compatible > + - '#address-cells' > + - '#size-cells' > + - reg > + - gpio-controller > + - '#gpio-cells' > + - interrupts > + - interrupt-names > + - interrupt-controller > + - '#interrupt-cells' > + - ranges > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/pxa-clock.h> > + gpio@40e00000 { > + compatible = "intel,pxa3xx-gpio"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x40e00000 0x10000>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <8>, <9>, <10>; > + interrupt-names = "gpio0", "gpio1", "gpio_mux"; > + clocks = <&clks CLK_GPIO>; > + interrupt-controller; > + #interrupt-cells = <2>; > + ranges; No child, so there should be no ranges here. > + }; > + - | > + #include <dt-bindings/clock/marvell,pxa910.h> > + gpio@d4019000 { > + compatible = "marvell,mmp-gpio"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0xd4019000 0x1000>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <49>; > + interrupt-names = "gpio_mux"; > + clocks = <&soc_clocks PXA910_CLK_GPIO>; > + resets = <&soc_clocks PXA910_CLK_GPIO>; > + interrupt-controller; > + #interrupt-cells = <2>; > + ranges; > + > + gpio@d4019000 { > + reg = <0xd4019000 0x4>; > + }; > + > + gpio@d4019004 { > + reg = <0xd4019004 0x4>; > + }; > + > + gpio@d4019008 { > + reg = <0xd4019008 0x4>; > + }; > + > + gpio@d4019100 { > + reg = <0xd4019100 0x4>; > + }; > + }; > + > +... > -- > 2.25.1 >
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org> To: Lubomir Rintel <lkundrak@v3.sk> Cc: Linus Walleij <linus.walleij@linaro.org>, Bartosz Golaszewski <bgolaszewski@baylibre.com>, Thomas Gleixner <tglx@linutronix.de>, Jason Cooper <jason@lakedaemon.net>, Marc Zyngier <maz@kernel.org>, Mauro Carvalho Chehab <mchehab@kernel.org>, Ulf Hansson <ulf.hansson@linaro.org>, Kishon Vijay Abraham I <kishon@ti.com>, Alessandro Zummo <a.zummo@towertech.it>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Mark Brown <broonie@kernel.org>, Daniel Lezcano <daniel.lezcano@linaro.org>, Andrew Lunn <andrew@lunn.ch>, Gregory Clement <gregory.clement@bootlin.com>, Daniel Mack <daniel@zonque.org>, Haojian Zhuang <haojian.zhuang@gmail.com>, Robert Jarzmik <robert.jarzmik@free.fr>, devicetree@vger.kerne Subject: Re: [PATCH 21/28] dt-bindings: gpio: Convert mrvl-gpio to json-schema Date: Fri, 27 Mar 2020 13:28:20 -0600 [thread overview] Message-ID: <20200327192820.GA8577@bogus> (raw) In-Reply-To: <20200317093922.20785-22-lkundrak@v3.sk> On Tue, Mar 17, 2020 at 10:39:15AM +0100, Lubomir Rintel wrote: > This converts the mrvl-gpio binding to DT schema format using json-schema. > > Various fixes were done during the conversion, such as adding more > properties that are in fact mandatory or extending the examples to > include child nodes with extra GPIO blocks. Ugg, not how I would have done this. Differences in register layout should be implied by the compatible strings. But I guess we have to live with it now. > The compatible strings are a mess. It is not clear why so many of them > are needed; the driver doesn't really seem to differentiate between the > models. Some of them, like marvell,pxa93x-gpio and marvell,pxa1928-gpio > are not used at all, so it's not known how many interrupts they utilize. > On the other hand, mrvl,pxa-gpio has been seen in the tree, but it > doesn't end up in any actual DTB file. I added pxa1928 and then work on it ended. I think it is safe to remove, but I dug up dts file and it is 1 irq. > In any case -- the schema merely copies whatever was in the original > binding document, so it's hopefully no more wrong that the original. > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> > --- > .../devicetree/bindings/gpio/mrvl-gpio.txt | 48 ----- > .../devicetree/bindings/gpio/mrvl-gpio.yaml | 173 ++++++++++++++++++ > 2 files changed, 173 insertions(+), 48 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.txt > create mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml > > diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt > deleted file mode 100644 > index 30fd2201b3d4c..0000000000000 > --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt > +++ /dev/null > @@ -1,48 +0,0 @@ > -* Marvell PXA GPIO controller > - > -Required properties: > -- compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio", > - "intel,pxa27x-gpio", "intel,pxa3xx-gpio", > - "marvell,pxa93x-gpio", "marvell,mmp-gpio", > - "marvell,mmp2-gpio" or marvell,pxa1928-gpio. > -- reg : Address and length of the register set for the device > -- interrupts : Should be the port interrupt shared by all gpio pins. > - There're three gpio interrupts in arch-pxa, and they're gpio0, > - gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp, > - gpio_mux. > -- interrupt-names : Should be the names of irq resources. Each interrupt > - uses its own interrupt name, so there should be as many interrupt names > - as referenced interrupts. > -- interrupt-controller : Identifies the node as an interrupt controller. > -- #interrupt-cells: Specifies the number of cells needed to encode an > - interrupt source. > -- gpio-controller : Marks the device node as a gpio controller. > -- #gpio-cells : Should be two. The first cell is the pin number and > - the second cell is used to specify flags. See gpio.txt for possible > - values. > - > -Example for a MMP platform: > - > - gpio: gpio@d4019000 { > - compatible = "marvell,mmp-gpio"; > - reg = <0xd4019000 0x1000>; > - interrupts = <49>; > - interrupt-names = "gpio_mux"; > - gpio-controller; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <1>; > - }; > - > -Example for a PXA3xx platform: > - > - gpio: gpio@40e00000 { > - compatible = "intel,pxa3xx-gpio"; > - reg = <0x40e00000 0x10000>; > - interrupt-names = "gpio0", "gpio1", "gpio_mux"; > - interrupts = <8 9 10>; > - gpio-controller; > - #gpio-cells = <0x2>; > - interrupt-controller; > - #interrupt-cells = <0x2>; > - }; > diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml > new file mode 100644 > index 0000000000000..5c713bf59b06d > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml > @@ -0,0 +1,173 @@ > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/gpio/mrvl-gpio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Marvell PXA GPIO controller > + > +maintainers: > + - devicetree@vger.kernel.org Needs to be a real person that cares about this h/w. > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + enum: > + - intel,pxa25x-gpio > + - intel,pxa26x-gpio > + - intel,pxa27x-gpio > + - intel,pxa3xx-gpio > + then: > + properties: > + interrupts: > + minItems: 3 > + maxItems: 3 > + interrupt-names: > + items: > + - const: gpio0 > + - const: gpio1 > + - const: gpio_mux > + - if: > + properties: > + compatible: > + contains: > + enum: > + - marvell,mmp-gpio > + - marvell,mmp2-gpio I'd make this an else clause. > + then: > + properties: > + interrupts: > + maxItems: 1 > + interrupt-names: > + items: > + - const: gpio_mux > + > +properties: > + $nodename: > + pattern: '^gpio@[0-9a-f]+$' > + > + compatible: > + enum: > + - intel,pxa25x-gpio > + - intel,pxa26x-gpio > + - intel,pxa27x-gpio > + - intel,pxa3xx-gpio > + - marvell,mmp-gpio > + - marvell,mmp2-gpio > + - marvell,pxa93x-gpio > + - marvell,pxa1928-gpio > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + resets: > + maxItems: 1 > + > + ranges: true > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 1 > + > + gpio-controller: true > + > + '#gpio-cells': > + const: 2 > + > + gpio-ranges: > + maxItems: 1 My pxa1928 dts has this in the child nodes. Sure this is right? > + > + interrupts: true > + > + interrupt-names: true > + > + interrupt-controller: true > + > + '#interrupt-cells': > + const: 2 > + > +patternProperties: > + '^gpio@[0-9a-f]*$': > + type: object > + properties: > + reg: > + maxItems: 1 > + > + required: > + - reg > + > + additionalProperties: false > + > +required: > + - compatible > + - '#address-cells' > + - '#size-cells' > + - reg > + - gpio-controller > + - '#gpio-cells' > + - interrupts > + - interrupt-names > + - interrupt-controller > + - '#interrupt-cells' > + - ranges > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/pxa-clock.h> > + gpio@40e00000 { > + compatible = "intel,pxa3xx-gpio"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x40e00000 0x10000>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <8>, <9>, <10>; > + interrupt-names = "gpio0", "gpio1", "gpio_mux"; > + clocks = <&clks CLK_GPIO>; > + interrupt-controller; > + #interrupt-cells = <2>; > + ranges; No child, so there should be no ranges here. > + }; > + - | > + #include <dt-bindings/clock/marvell,pxa910.h> > + gpio@d4019000 { > + compatible = "marvell,mmp-gpio"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0xd4019000 0x1000>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupts = <49>; > + interrupt-names = "gpio_mux"; > + clocks = <&soc_clocks PXA910_CLK_GPIO>; > + resets = <&soc_clocks PXA910_CLK_GPIO>; > + interrupt-controller; > + #interrupt-cells = <2>; > + ranges; > + > + gpio@d4019000 { > + reg = <0xd4019000 0x4>; > + }; > + > + gpio@d4019004 { > + reg = <0xd4019004 0x4>; > + }; > + > + gpio@d4019008 { > + reg = <0xd4019008 0x4>; > + }; > + > + gpio@d4019100 { > + reg = <0xd4019100 0x4>; > + }; > + }; > + > +... > -- > 2.25.1 >
next prev parent reply other threads:[~2020-03-27 19:28 UTC|newest] Thread overview: 155+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-03-17 9:38 [PATCH 00/28] DT: Improve validation for Marvell SoCs Lubomir Rintel 2020-03-17 9:38 ` Lubomir Rintel 2020-03-17 9:38 ` [PATCH 01/28] ARM: dts: kirkwood: Fix interrupt controller node name Lubomir Rintel 2020-03-17 9:38 ` Lubomir Rintel 2020-03-17 13:20 ` Andrew Lunn 2020-03-17 13:20 ` Andrew Lunn 2020-03-17 9:38 ` [PATCH 02/28] ARM: dts: dove: " Lubomir Rintel 2020-03-17 9:38 ` Lubomir Rintel 2020-03-17 13:20 ` Andrew Lunn 2020-03-17 13:20 ` Andrew Lunn 2020-03-17 9:38 ` [PATCH 03/28] ARM: dts: pxa168: Add missing address/size cells to i2c nodes Lubomir Rintel 2020-03-17 9:38 ` Lubomir Rintel 2020-03-17 13:21 ` Andrew Lunn 2020-03-17 13:21 ` Andrew Lunn 2020-03-17 9:38 ` [PATCH 04/28] ARM: dts: pxa168: Fix the gpio interrupt cell number Lubomir Rintel 2020-03-17 9:38 ` Lubomir Rintel 2020-03-17 13:27 ` Andrew Lunn 2020-03-17 13:27 ` Andrew Lunn 2020-03-17 9:38 ` [PATCH 05/28] ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property Lubomir Rintel 2020-03-17 9:38 ` Lubomir Rintel 2020-03-17 13:28 ` Andrew Lunn 2020-03-17 13:28 ` Andrew Lunn 2020-03-21 7:36 ` Robert Jarzmik 2020-03-21 7:36 ` Robert Jarzmik 2020-03-21 7:36 ` Robert Jarzmik 2020-03-17 9:39 ` [PATCH 06/28] ARM: dts: pxa910: Fix the gpio interrupt cell number Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-17 13:29 ` Andrew Lunn 2020-03-17 13:29 ` Andrew Lunn 2020-03-17 9:39 ` [PATCH 07/28] ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-17 13:29 ` Andrew Lunn 2020-03-17 13:29 ` Andrew Lunn 2020-03-17 9:39 ` [PATCH 08/28] ARM: dts: mmp*: " Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-17 13:30 ` Andrew Lunn 2020-03-17 13:30 ` Andrew Lunn 2020-03-17 13:30 ` Andrew Lunn 2020-03-17 13:30 ` Andrew Lunn 2020-03-17 9:39 ` [PATCH 09/28] ARM: dts: mmp3: fix L2 cache controller node name Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-17 13:31 ` Andrew Lunn 2020-03-17 13:31 ` Andrew Lunn 2020-03-17 9:39 ` [PATCH 10/28] ARM: dts: mmp3: fix USB & USB PHY node names Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-17 13:32 ` Andrew Lunn 2020-03-17 13:32 ` Andrew Lunn 2020-03-17 9:39 ` [PATCH 11/28] ARM: dts: berlin*: Fix up the SDHCI " Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-17 13:34 ` Andrew Lunn 2020-03-17 13:34 ` Andrew Lunn 2020-03-17 9:39 ` [PATCH 12/28] spi: dt-bindings: spi-controller: Slaves have no address cells Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-19 16:51 ` Rob Herring 2020-03-19 16:51 ` Rob Herring 2020-03-17 9:39 ` [PATCH 13/28] dt-bindings: serial: move Marvell compatible string to 8250 binding doc Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-17 13:48 ` Andrew Lunn 2020-03-17 13:48 ` Andrew Lunn 2020-03-17 19:09 ` Lubomir Rintel 2020-03-17 19:09 ` Lubomir Rintel 2020-03-19 16:09 ` Rob Herring 2020-03-19 16:09 ` Rob Herring 2020-03-19 16:11 ` Rob Herring 2020-03-19 16:11 ` Rob Herring 2020-03-20 9:24 ` Lubomir Rintel 2020-03-20 9:24 ` Lubomir Rintel 2020-03-17 9:39 ` [PATCH 14/28] dt-bindings: arm: l2x0: Tauros 3 is PL310 compatible Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-27 19:03 ` Rob Herring 2020-03-27 19:03 ` Rob Herring 2020-03-27 19:04 ` Rob Herring 2020-03-27 19:04 ` Rob Herring 2020-03-17 9:39 ` [PATCH 15/28] dt-bindings: arm: mrvl: Add missing compatible strings Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-17 13:54 ` Andrew Lunn 2020-03-17 13:54 ` Andrew Lunn 2020-03-27 19:06 ` Rob Herring 2020-03-27 19:06 ` Rob Herring 2020-03-17 9:39 ` [PATCH 16/28] dt-bindings: Add "mrvl", a legacy vendor prefix for Marvell Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-27 19:06 ` Rob Herring 2020-03-27 19:06 ` Rob Herring 2020-03-17 9:39 ` [PATCH 17/28] dt-bindings: mmc: Fix up clk-phase-sd-hs in an example Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-17 10:04 ` Sergei Shtylyov 2020-03-17 10:04 ` Sergei Shtylyov 2020-03-27 19:08 ` Rob Herring 2020-03-27 19:08 ` Rob Herring 2020-03-17 9:39 ` [PATCH 18/28] dt-bindings: mmc: Fix node name " Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-26 14:28 ` Ulf Hansson 2020-03-26 14:28 ` Ulf Hansson 2020-03-17 9:39 ` [PATCH 19/28] dt-bindings: mmc: Convert sdhci-pxa to json-schema Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-18 22:14 ` Rob Herring 2020-03-18 22:14 ` Rob Herring 2020-03-18 22:37 ` Rob Herring 2020-03-18 22:37 ` Rob Herring 2020-05-17 18:35 ` Lubomir Rintel 2020-03-17 9:39 ` [PATCH 20/28] dt-bindings: phy: Convert phy-mmp3-usb " Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-27 19:09 ` Rob Herring 2020-03-27 19:09 ` Rob Herring 2020-03-17 9:39 ` [PATCH 21/28] dt-bindings: gpio: Convert mrvl-gpio " Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-27 10:04 ` Linus Walleij 2020-03-27 10:04 ` Linus Walleij 2020-03-27 19:29 ` Rob Herring 2020-03-27 19:29 ` Rob Herring 2020-03-27 19:28 ` Rob Herring [this message] 2020-03-27 19:28 ` Rob Herring 2020-05-17 19:00 ` Lubomir Rintel 2020-03-17 9:39 ` [PATCH 22/28] dt-bindings: i2c: Convert i2c-pxa " Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-06-03 20:41 ` Wolfram Sang 2020-03-17 9:39 ` [PATCH 23/28] dt-bindings: interrupt-controller: Convert mrvl,intc " Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-27 19:42 ` Rob Herring 2020-03-27 19:42 ` Rob Herring 2020-05-17 19:11 ` Lubomir Rintel 2020-03-17 9:39 ` [PATCH 24/28] dt-bindings: media: Convert marvell,mmp2-ccic " Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-27 19:46 ` Rob Herring 2020-03-27 19:46 ` Rob Herring 2020-05-17 19:21 ` Lubomir Rintel 2020-03-17 9:39 ` [PATCH 25/28] dt-bindings: rtc: Convert sa1100-rtc " Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-27 19:49 ` Rob Herring 2020-03-27 19:49 ` Rob Herring 2020-05-17 19:25 ` Lubomir Rintel 2020-05-18 15:12 ` Rob Herring 2020-03-17 9:39 ` [PATCH 26/28] dt-bindings: spi: Convert spi-pxa2xx " Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-27 19:52 ` Rob Herring 2020-03-27 19:52 ` Rob Herring 2020-05-17 19:30 ` Lubomir Rintel 2020-03-17 9:39 ` [PATCH 27/28] dt-bindings: timer: Convert mrvl,mmp-timer " Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-27 19:53 ` Rob Herring 2020-03-27 19:53 ` Rob Herring 2020-03-17 9:39 ` [PATCH 28/28] dt-bindings: usb: Convert ehci-mv " Lubomir Rintel 2020-03-17 9:39 ` Lubomir Rintel 2020-03-27 19:55 ` Rob Herring 2020-03-27 19:55 ` Rob Herring 2020-05-17 19:34 ` Lubomir Rintel 2020-05-18 15:20 ` Rob Herring 2020-03-17 13:19 ` [PATCH 00/28] DT: Improve validation for Marvell SoCs Mark Brown 2020-03-17 13:19 ` Mark Brown 2020-03-17 13:46 ` Andrew Lunn 2020-03-17 13:46 ` Andrew Lunn 2020-03-17 13:55 ` Alexandre Belloni 2020-03-17 13:55 ` Alexandre Belloni 2020-03-17 13:59 ` Andrew Lunn 2020-03-17 13:59 ` Andrew Lunn
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200327192820.GA8577@bogus \ --to=robh@kernel.org \ --cc=a.zummo@towertech.it \ --cc=alexandre.belloni@bootlin.com \ --cc=andrew@lunn.ch \ --cc=bgolaszewski@baylibre.com \ --cc=broonie@kernel.org \ --cc=daniel.lezcano@linaro.org \ --cc=daniel@zonque.org \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=gregory.clement@bootlin.com \ --cc=haojian.zhuang@gmail.com \ --cc=jason@lakedaemon.net \ --cc=kishon@ti.com \ --cc=linus.walleij@linaro.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-i2c@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-rtc@vger.kernel.org \ --cc=linux-serial@vger.kernel.org \ --cc=linux-spi@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=lkundrak@v3.sk \ --cc=maz@kernel.org \ --cc=mchehab@kernel.org \ --cc=robert.jarzmik@free.fr \ --cc=tglx@linutronix.de \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.