From: Michael Walle <michael@walle.cc> To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: "Linus Walleij" <linus.walleij@linaro.org>, "Bartosz Golaszewski" <bgolaszewski@baylibre.com>, "Rob Herring" <robh+dt@kernel.org>, "Jean Delvare" <jdelvare@suse.com>, "Guenter Roeck" <linux@roeck-us.net>, "Lee Jones" <lee.jones@linaro.org>, "Thierry Reding" <thierry.reding@gmail.com>, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, "Wim Van Sebroeck" <wim@linux-watchdog.org>, "Shawn Guo" <shawnguo@kernel.org>, "Li Yang" <leoyang.li@nxp.com>, "Thomas Gleixner" <tglx@linutronix.de>, "Jason Cooper" <jason@lakedaemon.net>, "Marc Zyngier" <maz@kernel.org>, "Mark Brown" <broonie@kernel.org>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, "Michael Walle" <michael@walle.cc> Subject: [PATCH v2 13/16] arm64: dts: freescale: sl28: enable sl28cpld Date: Thu, 2 Apr 2020 22:36:53 +0200 [thread overview] Message-ID: <20200402203656.27047-14-michael@walle.cc> (raw) In-Reply-To: <20200402203656.27047-1-michael@walle.cc> Add the board management controller node. Signed-off-by: Michael Walle <michael@walle.cc> --- .../freescale/fsl-ls1028a-kontron-sl28.dts | 92 +++++++++++++++++++ 1 file changed, 92 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 41ba38adc906..b73794d57db4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "fsl-ls1028a.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Kontron SMARC-sAL28"; @@ -174,6 +175,97 @@ reg = <0x32>; }; + sl28cpld: sl28cpld@4a { + #address-cells = <1>; + #size-cells = <0>; + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + interrupts-extended = <&gpio2 6 IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + + watchdog@0 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@4 { + compatible = "kontron,sl28cpld-fan"; + reg = <1>; + }; + + sl28cpld_pwm0: pwm@5 { + #pwm-cells = <2>; + compatible = "kontron,sl28cpld-pwm"; + reg = <2>; + }; + + sl28cpld_pwm1: pwm@6 { + #pwm-cells = <2>; + compatible = "kontron,sl28cpld-pwm"; + reg = <3>; + }; + + sl28cpld_gpio0: gpio@0 { + compatible = "kontron,sl28cpld-gpio"; + reg = <4>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N", + "GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N", + "GPIO4_HDA_RST_N", "GPIO5_PWM_OUT", + "GPIO6_TACHIN", "GPIO7"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio1: gpio@1 { + compatible = "kontron,sl28cpld-gpio"; + reg = <5>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO8", "GPIO9", "GPIO10", "GPIO11", + "", "", "", ""; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio2: gpio@2 { + compatible = "kontron,sl28cpld-gpo"; + reg = <6>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "LCD0 voltage enable", + "LCD0 backlight enable", + "eMMC reset", "LVDS bridge reset", + "LVDS bridge power-down", + "SDIO power enable", + "", ""; + }; + + sl28cpld_gpio3: gpio@3 { + compatible = "kontron,sl28cpld-gpi"; + reg = <7>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "Power button", "Force recovery", "Sleep", + "Battery low", "Lid state", "Charging", + "Charger present", ""; + }; + }; + eeprom@50 { compatible = "atmel,24c32"; reg = <0x50>; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Michael Walle <michael@walle.cc> To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: "Marc Zyngier" <maz@kernel.org>, "Jean Delvare" <jdelvare@suse.com>, "Jason Cooper" <jason@lakedaemon.net>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, "Shawn Guo" <shawnguo@kernel.org>, "Linus Walleij" <linus.walleij@linaro.org>, "Li Yang" <leoyang.li@nxp.com>, "Bartosz Golaszewski" <bgolaszewski@baylibre.com>, "Michael Walle" <michael@walle.cc>, "Rob Herring" <robh+dt@kernel.org>, "Thierry Reding" <thierry.reding@gmail.com>, "Mark Brown" <broonie@kernel.org>, "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>, "Thomas Gleixner" <tglx@linutronix.de>, "Wim Van Sebroeck" <wim@linux-watchdog.org>, "Lee Jones" <lee.jones@linaro.org>, "Guenter Roeck" <linux@roeck-us.net> Subject: [PATCH v2 13/16] arm64: dts: freescale: sl28: enable sl28cpld Date: Thu, 2 Apr 2020 22:36:53 +0200 [thread overview] Message-ID: <20200402203656.27047-14-michael@walle.cc> (raw) In-Reply-To: <20200402203656.27047-1-michael@walle.cc> Add the board management controller node. Signed-off-by: Michael Walle <michael@walle.cc> --- .../freescale/fsl-ls1028a-kontron-sl28.dts | 92 +++++++++++++++++++ 1 file changed, 92 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 41ba38adc906..b73794d57db4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "fsl-ls1028a.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Kontron SMARC-sAL28"; @@ -174,6 +175,97 @@ reg = <0x32>; }; + sl28cpld: sl28cpld@4a { + #address-cells = <1>; + #size-cells = <0>; + compatible = "kontron,sl28cpld"; + reg = <0x4a>; + interrupts-extended = <&gpio2 6 IRQ_TYPE_EDGE_FALLING>; + + interrupt-controller; + #interrupt-cells = <2>; + + watchdog@0 { + compatible = "kontron,sl28cpld-wdt"; + reg = <0>; + kontron,assert-wdt-timeout-pin; + }; + + hwmon@4 { + compatible = "kontron,sl28cpld-fan"; + reg = <1>; + }; + + sl28cpld_pwm0: pwm@5 { + #pwm-cells = <2>; + compatible = "kontron,sl28cpld-pwm"; + reg = <2>; + }; + + sl28cpld_pwm1: pwm@6 { + #pwm-cells = <2>; + compatible = "kontron,sl28cpld-pwm"; + reg = <3>; + }; + + sl28cpld_gpio0: gpio@0 { + compatible = "kontron,sl28cpld-gpio"; + reg = <4>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO0_CAM0_PWR_N", "GPIO1_CAM1_PWR_N", + "GPIO2_CAM0_RST_N", "GPIO3_CAM1_RST_N", + "GPIO4_HDA_RST_N", "GPIO5_PWM_OUT", + "GPIO6_TACHIN", "GPIO7"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio1: gpio@1 { + compatible = "kontron,sl28cpld-gpio"; + reg = <5>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "GPIO8", "GPIO9", "GPIO10", "GPIO11", + "", "", "", ""; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sl28cpld_gpio2: gpio@2 { + compatible = "kontron,sl28cpld-gpo"; + reg = <6>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "LCD0 voltage enable", + "LCD0 backlight enable", + "eMMC reset", "LVDS bridge reset", + "LVDS bridge power-down", + "SDIO power enable", + "", ""; + }; + + sl28cpld_gpio3: gpio@3 { + compatible = "kontron,sl28cpld-gpi"; + reg = <7>; + + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "Power button", "Force recovery", "Sleep", + "Battery low", "Lid state", "Charging", + "Charger present", ""; + }; + }; + eeprom@50 { compatible = "atmel,24c32"; reg = <0x50>; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-04-02 20:37 UTC|newest] Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-04-02 20:36 [PATCH v2 00/16] Add support for Kontron sl28cpld Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` [PATCH v2 01/16] include/linux/ioport.h: add helper to define REG resource constructs Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` [PATCH v2 02/16] mfd: mfd-core: Don't overwrite the dma_mask of the child device Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` [PATCH v2 03/16] mfd: mfd-core: match device tree node against reg property Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` [PATCH v2 04/16] regmap-irq: make it possible to add irq_chip do a specific device node Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-14 15:37 ` Applied "regmap-irq: make it possible to add irq_chip do a specific device node" to the regmap tree Mark Brown 2020-04-14 15:37 ` Mark Brown 2020-04-14 15:37 ` Mark Brown 2020-04-14 17:12 ` [PATCH v2 04/16] regmap-irq: make it possible to add irq_chip do a specific device node Mark Brown 2020-04-14 17:12 ` Mark Brown 2020-04-14 17:12 ` Mark Brown 2020-04-02 20:36 ` [PATCH v2 05/16] dt-bindings: mfd: Add bindings for sl28cpld Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` [PATCH v2 06/16] mfd: Add support for Kontron sl28cpld management controller Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` [PATCH v2 07/16] irqchip: add sl28cpld interrupt controller support Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` [PATCH v2 08/16] watchdog: add support for sl28cpld watchdog Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-03 6:25 ` Guenter Roeck 2020-04-03 6:25 ` Guenter Roeck 2020-04-03 6:25 ` Guenter Roeck 2020-04-02 20:36 ` [PATCH v2 09/16] pwm: add support for sl28cpld PWM controller Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` [PATCH v2 10/16] gpio: add a reusable generic gpio_chip using regmap Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-06 7:47 ` Bartosz Golaszewski 2020-04-06 7:47 ` Bartosz Golaszewski 2020-04-06 7:47 ` Bartosz Golaszewski 2020-04-06 10:10 ` Michael Walle 2020-04-06 10:10 ` Michael Walle 2020-04-06 10:10 ` Michael Walle 2020-04-14 9:50 ` Bartosz Golaszewski 2020-04-14 9:50 ` Bartosz Golaszewski 2020-04-14 9:50 ` Bartosz Golaszewski 2020-04-14 10:07 ` Michael Walle 2020-04-14 10:07 ` Michael Walle 2020-04-14 10:07 ` Michael Walle 2020-04-14 17:00 ` Bartosz Golaszewski 2020-04-14 17:00 ` Bartosz Golaszewski 2020-04-14 17:00 ` Bartosz Golaszewski 2020-04-14 18:41 ` Michael Walle 2020-04-14 18:41 ` Michael Walle 2020-04-14 18:41 ` Michael Walle 2020-04-14 19:57 ` Michael Walle 2020-04-14 19:57 ` Michael Walle 2020-04-16 9:20 ` Linus Walleij 2020-04-16 9:20 ` Linus Walleij 2020-04-16 9:20 ` Linus Walleij 2020-04-16 9:34 ` Michael Walle 2020-04-16 9:34 ` Michael Walle 2020-04-16 9:34 ` Michael Walle 2020-04-14 17:21 ` Mark Brown 2020-04-14 17:21 ` Mark Brown 2020-04-14 17:21 ` Mark Brown 2020-04-14 18:36 ` Michael Walle 2020-04-14 18:36 ` Michael Walle 2020-04-14 18:36 ` Michael Walle 2020-04-14 18:39 ` Mark Brown 2020-04-14 18:39 ` Mark Brown 2020-04-14 18:39 ` Mark Brown 2020-04-16 9:27 ` Linus Walleij 2020-04-16 9:27 ` Linus Walleij 2020-04-16 9:27 ` Linus Walleij 2020-04-17 6:34 ` Michael Walle 2020-04-17 6:34 ` Michael Walle 2020-04-17 6:34 ` Michael Walle 2020-04-21 10:50 ` Michael Walle 2020-04-21 10:50 ` Michael Walle 2020-04-21 10:50 ` Michael Walle 2020-04-02 20:36 ` [PATCH v2 11/16] gpio: add support for the sl28cpld GPIO controller Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-16 8:34 ` Linus Walleij 2020-04-16 8:34 ` Linus Walleij 2020-04-16 8:34 ` Linus Walleij 2020-04-16 8:55 ` Michael Walle 2020-04-16 8:55 ` Michael Walle 2020-04-16 8:55 ` Michael Walle 2020-04-02 20:36 ` [PATCH v2 12/16] hwmon: add support for the sl28cpld hardware monitoring controller Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 21:30 ` Guenter Roeck 2020-04-02 21:30 ` Guenter Roeck 2020-04-02 21:30 ` Guenter Roeck 2020-04-02 20:36 ` Michael Walle [this message] 2020-04-02 20:36 ` [PATCH v2 13/16] arm64: dts: freescale: sl28: enable sl28cpld Michael Walle 2020-04-02 20:36 ` [PATCH v2 14/16] arm64: dts: freescale: sl28: map GPIOs to input events Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` [PATCH v2 15/16] arm64: dts: freescale: sl28: enable LED support Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` [PATCH v2 16/16] arm64: dts: freescale: sl28: enable fan support Michael Walle 2020-04-02 20:36 ` Michael Walle 2020-04-02 20:36 ` Michael Walle
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200402203656.27047-14-michael@walle.cc \ --to=michael@walle.cc \ --cc=bgolaszewski@baylibre.com \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=jason@lakedaemon.net \ --cc=jdelvare@suse.com \ --cc=lee.jones@linaro.org \ --cc=leoyang.li@nxp.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-hwmon@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pwm@vger.kernel.org \ --cc=linux-watchdog@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=maz@kernel.org \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ --cc=tglx@linutronix.de \ --cc=thierry.reding@gmail.com \ --cc=u.kleine-koenig@pengutronix.de \ --cc=wim@linux-watchdog.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.