All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alistair Francis <alistair@alistair23.me>
To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	marcel@holtmann.org, johan.hedberg@gmail.com,
	linux-bluetooth@vger.kernel.org, mripard@kernel.org,
	wens@csie.org
Cc: anarsoul@gmail.com, devicetree@vger.kernel.org,
	alistair23@gmail.com, linux-arm-kernel@lists.infradead.org,
	Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v4 1/3] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
Date: Sat, 25 Apr 2020 08:55:29 -0700	[thread overview]
Message-ID: <20200425155531.2816584-1-alistair@alistair23.me> (raw)

From: Vasily Khoruzhick <anarsoul@gmail.com>

Add binding document for bluetooth part of RTL8723BS/RTL8723CS

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 .../bindings/net/realtek-bluetooth.yaml       | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/realtek-bluetooth.yaml

diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
new file mode 100644
index 000000000000..f15a5e5e4859
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/realtek-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTL8723BS/RTL8723CS/RTL8822CS Bluetooth Device Tree Bindings
+
+maintainers:
+  - Vasily Khoruzhick <anarsoul@gmail.com>
+  - Alistair Francis <alistair@alistair23.me>
+
+description:
+  RTL8723CS/RTL8723CS/RTL8822CS is WiFi + BT chip. WiFi part is connected over
+  SDIO, while BT is connected over serial. It speaks H5 protocol with few
+  extra commands to upload firmware and change module speed.
+
+properties:
+  compatible:
+    oneOf:
+      - const: "realtek,rtl8723bs-bt"
+      - const: "realtek,rtl8723cs-bt"
+      - const: "realtek,rtl8822cs-bt"
+
+  device-wake-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to wakeup the BT module
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to enable the BT module
+
+  host-wake-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to wakeup the host processor
+
+required:
+  - compatible
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    uart1 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+        uart-has-rtscts = <1>;
+
+        bluetooth {
+            compatible = "realtek,rtl8723bs-bt";
+            device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+            host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+        };
+    };
-- 
2.26.0


WARNING: multiple messages have this Message-ID (diff)
From: Alistair Francis <alistair@alistair23.me>
To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	marcel@holtmann.org, johan.hedberg@gmail.com,
	linux-bluetooth@vger.kernel.org, mripard@kernel.org,
	wens@csie.org
Cc: devicetree@vger.kernel.org,
	Alistair Francis <alistair@alistair23.me>,
	linux-arm-kernel@lists.infradead.org, alistair23@gmail.com
Subject: [PATCH v4 1/3] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
Date: Sat, 25 Apr 2020 08:55:29 -0700	[thread overview]
Message-ID: <20200425155531.2816584-1-alistair@alistair23.me> (raw)

From: Vasily Khoruzhick <anarsoul@gmail.com>

Add binding document for bluetooth part of RTL8723BS/RTL8723CS

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
 .../bindings/net/realtek-bluetooth.yaml       | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/realtek-bluetooth.yaml

diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
new file mode 100644
index 000000000000..f15a5e5e4859
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/realtek-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTL8723BS/RTL8723CS/RTL8822CS Bluetooth Device Tree Bindings
+
+maintainers:
+  - Vasily Khoruzhick <anarsoul@gmail.com>
+  - Alistair Francis <alistair@alistair23.me>
+
+description:
+  RTL8723CS/RTL8723CS/RTL8822CS is WiFi + BT chip. WiFi part is connected over
+  SDIO, while BT is connected over serial. It speaks H5 protocol with few
+  extra commands to upload firmware and change module speed.
+
+properties:
+  compatible:
+    oneOf:
+      - const: "realtek,rtl8723bs-bt"
+      - const: "realtek,rtl8723cs-bt"
+      - const: "realtek,rtl8822cs-bt"
+
+  device-wake-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to wakeup the BT module
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to enable the BT module
+
+  host-wake-gpios:
+    maxItems: 1
+    description: GPIO specifier, used to wakeup the host processor
+
+required:
+  - compatible
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    uart1 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+        uart-has-rtscts = <1>;
+
+        bluetooth {
+            compatible = "realtek,rtl8723bs-bt";
+            device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+            host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+        };
+    };
-- 
2.26.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-04-25 15:55 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-25 15:55 Alistair Francis [this message]
2020-04-25 15:55 ` [PATCH v4 1/3] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth Alistair Francis
2020-04-25 15:55 ` [PATCH v4 2/3] Bluetooth: hci_h5: Add support for binding RTL8723BS with device tree Alistair Francis
2020-04-25 15:55   ` Alistair Francis
2020-04-25 15:55 ` [DO-NOT-MERGE][PATCH v4 3/3] arm64: allwinner: Enable Bluetooth and WiFi on sopine baseboard Alistair Francis
2020-04-25 15:55   ` Alistair Francis
2020-04-28  9:51   ` Marcel Holtmann
2020-04-28  9:51     ` Marcel Holtmann
2020-04-28 10:03     ` Maxime Ripard
2020-04-28 10:03       ` Maxime Ripard
2020-04-28 10:13 ` [PATCH v4 1/3] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth Marcel Holtmann
2020-04-28 10:13   ` Marcel Holtmann
  -- strict thread matches above, loose matches on Subject: below --
2020-04-22  3:53 Alistair Francis
2020-04-22  3:53 ` Alistair Francis
2020-04-22 19:42 ` Rob Herring
2020-04-22 19:42   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200425155531.2816584-1-alistair@alistair23.me \
    --to=alistair@alistair23.me \
    --cc=alistair23@gmail.com \
    --cc=anarsoul@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mripard@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.