All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Ezequiel Garcia <ezequiel@collabora.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Hans Verkuil <hansverk@cisco.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Subject: [PATCH v3 4/4] media: rockchip: rga: Only set output CSC mode for RGB input
Date: Thu, 30 Apr 2020 18:42:45 +0200	[thread overview]
Message-ID: <20200430164245.1630174-5-paul.kocialkowski@bootlin.com> (raw)
In-Reply-To: <20200430164245.1630174-1-paul.kocialkowski@bootlin.com>

Setting the output CSC mode is required for a YUV output, but must not
be set when the input is also YUV. Doing this (as tested with a YUV420P
to YUV420P conversion) results in wrong colors.

Adapt the logic to only set the output CSC mode when the output is YUV and
the input is RGB. Also add a comment to clarify the rationale.

Fixes: f7e7b48e6d79 ("[media] rockchip/rga: v4l2 m2m support")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
---
 drivers/media/platform/rockchip/rga/rga-hw.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c b/drivers/media/platform/rockchip/rga/rga-hw.c
index 5607ee8d1917..aaa96f256356 100644
--- a/drivers/media/platform/rockchip/rga/rga-hw.c
+++ b/drivers/media/platform/rockchip/rga/rga-hw.c
@@ -200,6 +200,11 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
 	dst_info.data.format = ctx->out.fmt->hw_format;
 	dst_info.data.swap = ctx->out.fmt->color_swap;
 
+	/*
+	 * CSC mode must only be set when the colorspace families differ between
+	 * input and output. It must remain unset (zeroed) if both are the same.
+	 */
+
 	if (RGA_COLOR_FMT_IS_YUV(ctx->in.fmt->hw_format) &&
 	    RGA_COLOR_FMT_IS_RGB(ctx->out.fmt->hw_format)) {
 		switch (ctx->in.colorspace) {
@@ -212,7 +217,8 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
 		}
 	}
 
-	if (RGA_COLOR_FMT_IS_YUV(ctx->out.fmt->hw_format)) {
+	if (RGA_COLOR_FMT_IS_RGB(ctx->in.fmt->hw_format) &&
+	    RGA_COLOR_FMT_IS_YUV(ctx->out.fmt->hw_format)) {
 		switch (ctx->out.colorspace) {
 		case V4L2_COLORSPACE_REC709:
 			dst_info.data.csc_mode = RGA_SRC_CSC_MODE_BT709_R0;
-- 
2.26.0


WARNING: multiple messages have this Message-ID (diff)
From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
	Heiko Stuebner <heiko@sntech.de>,
	Hans Verkuil <hansverk@cisco.com>,
	Rob Herring <robh+dt@kernel.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Ezequiel Garcia <ezequiel@collabora.com>
Subject: [PATCH v3 4/4] media: rockchip: rga: Only set output CSC mode for RGB input
Date: Thu, 30 Apr 2020 18:42:45 +0200	[thread overview]
Message-ID: <20200430164245.1630174-5-paul.kocialkowski@bootlin.com> (raw)
In-Reply-To: <20200430164245.1630174-1-paul.kocialkowski@bootlin.com>

Setting the output CSC mode is required for a YUV output, but must not
be set when the input is also YUV. Doing this (as tested with a YUV420P
to YUV420P conversion) results in wrong colors.

Adapt the logic to only set the output CSC mode when the output is YUV and
the input is RGB. Also add a comment to clarify the rationale.

Fixes: f7e7b48e6d79 ("[media] rockchip/rga: v4l2 m2m support")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
---
 drivers/media/platform/rockchip/rga/rga-hw.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/rockchip/rga/rga-hw.c b/drivers/media/platform/rockchip/rga/rga-hw.c
index 5607ee8d1917..aaa96f256356 100644
--- a/drivers/media/platform/rockchip/rga/rga-hw.c
+++ b/drivers/media/platform/rockchip/rga/rga-hw.c
@@ -200,6 +200,11 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
 	dst_info.data.format = ctx->out.fmt->hw_format;
 	dst_info.data.swap = ctx->out.fmt->color_swap;
 
+	/*
+	 * CSC mode must only be set when the colorspace families differ between
+	 * input and output. It must remain unset (zeroed) if both are the same.
+	 */
+
 	if (RGA_COLOR_FMT_IS_YUV(ctx->in.fmt->hw_format) &&
 	    RGA_COLOR_FMT_IS_RGB(ctx->out.fmt->hw_format)) {
 		switch (ctx->in.colorspace) {
@@ -212,7 +217,8 @@ static void rga_cmd_set_trans_info(struct rga_ctx *ctx)
 		}
 	}
 
-	if (RGA_COLOR_FMT_IS_YUV(ctx->out.fmt->hw_format)) {
+	if (RGA_COLOR_FMT_IS_RGB(ctx->in.fmt->hw_format) &&
+	    RGA_COLOR_FMT_IS_YUV(ctx->out.fmt->hw_format)) {
 		switch (ctx->out.colorspace) {
 		case V4L2_COLORSPACE_REC709:
 			dst_info.data.csc_mode = RGA_SRC_CSC_MODE_BT709_R0;
-- 
2.26.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-04-30 16:43 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-30 16:42 [PATCH v3 0/4] media: rockchip: rga: PX30 support and YUV2YUV fix Paul Kocialkowski
2020-04-30 16:42 ` Paul Kocialkowski
2020-04-30 16:42 ` Paul Kocialkowski
2020-04-30 16:42 ` [PATCH v3 1/4] dt-bindings: rockchip-rga: Add PX30 compatible Paul Kocialkowski
2020-04-30 16:42   ` Paul Kocialkowski
2020-04-30 21:24   ` Johan Jonker
2020-04-30 21:24     ` Johan Jonker
2020-05-07 20:23     ` Paul Kocialkowski
2020-05-07 20:23       ` Paul Kocialkowski
2020-05-07 20:23       ` Paul Kocialkowski
2020-05-07 23:01       ` Johan Jonker
2020-05-07 23:01         ` Johan Jonker
2020-04-30 16:42 ` [PATCH v3 2/4] arm64: dts: rockchip: Add RGA support to the PX30 Paul Kocialkowski
2020-04-30 16:42   ` Paul Kocialkowski
2020-04-30 22:05   ` Johan Jonker
2020-04-30 22:05     ` Johan Jonker
2020-04-30 22:05     ` Johan Jonker
2020-05-07 20:25     ` Paul Kocialkowski
2020-05-07 20:25       ` Paul Kocialkowski
2020-05-07 23:40       ` Johan Jonker
2020-05-07 23:40         ` Johan Jonker
2020-05-07 23:40         ` Johan Jonker
2020-05-08 10:55         ` Heiko Stuebner
2020-05-08 10:55           ` Heiko Stuebner
2020-05-08 10:55           ` Heiko Stuebner
2020-04-30 16:42 ` [PATCH v3 3/4] media: rockchip: rga: Introduce color fmt macros and refactor CSC mode logic Paul Kocialkowski
2020-04-30 16:42   ` Paul Kocialkowski
2020-05-08  4:18   ` Ezequiel Garcia
2020-05-08  4:18     ` Ezequiel Garcia
2020-04-30 16:42 ` Paul Kocialkowski [this message]
2020-04-30 16:42   ` [PATCH v3 4/4] media: rockchip: rga: Only set output CSC mode for RGB input Paul Kocialkowski
2020-05-08  4:19   ` Ezequiel Garcia
2020-05-08  4:19     ` Ezequiel Garcia
2020-05-08  4:19     ` Ezequiel Garcia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200430164245.1630174-5-paul.kocialkowski@bootlin.com \
    --to=paul.kocialkowski@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=ezequiel@collabora.com \
    --cc=hansverk@cisco.com \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.