From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> To: kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org, philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org, Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>, Frank Wang <frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>, wmc-TNX95d0MmH7DzftRWevZcw@public.gmane.org, chenjh-TNX95d0MmH7DzftRWevZcw@public.gmane.org, heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org Cc: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>, u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org, Belisko Marek <marek.belisko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Subject: [PATCH v2 4/7] phy: rockchip: Add Rockchip USB2PHY driver Date: Wed, 6 May 2020 13:20:22 +0530 [thread overview] Message-ID: <20200506075025.1677-5-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200506075025.1677-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> Add Rockchip USB2PHY driver with initial support. This will help to use it for EHCI controller in host mode, and USB 3.0 controller in otg mode. More functionality like charge, vbus detection will add it in future changes. Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> --- Changes for v2: - update with Kconfig menu drivers/Makefile | 1 + drivers/phy/Kconfig | 1 + drivers/phy/rockchip/Kconfig | 14 + drivers/phy/rockchip/Makefile | 6 + drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 312 ++++++++++++++++++ 5 files changed, 334 insertions(+) create mode 100644 drivers/phy/rockchip/Kconfig create mode 100644 drivers/phy/rockchip/Makefile create mode 100644 drivers/phy/rockchip/phy-rockchip-inno-usb2.c diff --git a/drivers/Makefile b/drivers/Makefile index 4208750428..94e8c5da17 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -91,6 +91,7 @@ obj-y += dfu/ obj-$(CONFIG_PCH) += pch/ obj-y += phy/allwinner/ obj-y += phy/marvell/ +obj-y += phy/rockchip/ obj-y += rtc/ obj-y += scsi/ obj-y += sound/ diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index a72f34f0d4..e19a6c0aa3 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -217,4 +217,5 @@ config PHY_MTK_TPHY multi-ports is first version, otherwise is second veriosn, so you can easily distinguish them by banks layout. +source "drivers/phy/rockchip/Kconfig" endmenu diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig new file mode 100644 index 0000000000..d73ac695e1 --- /dev/null +++ b/drivers/phy/rockchip/Kconfig @@ -0,0 +1,14 @@ +# +# Phy drivers for Rockchip platforms +# + +menu "Rockchip PHY driver" + +config PHY_ROCKCHIP_INNO_USB2 + bool "Rockchip INNO USB2PHY Driver" + depends on ARCH_ROCKCHIP + select PHY + help + Support for Rockchip USB2.0 PHY with Innosilicon IP block. + +endmenu diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile new file mode 100644 index 0000000000..9b0cbc6acf --- /dev/null +++ b/drivers/phy/rockchip/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2020 Amarula Solutions(India) +# + +obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c new file mode 100644 index 0000000000..dd4905d834 --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Rockchip USB2.0 PHY with Innosilicon IP block driver + * + * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (C) 2020 Amarula Solutions(India) + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <dm/device_compat.h> +#include <dm/lists.h> +#include <generic-phy.h> +#include <reset.h> +#include <syscon.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <linux/iopoll.h> +#include <asm/arch-rockchip/clock.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define usleep_range(a, b) udelay((b)) +#define BIT_WRITEABLE_SHIFT 16 + +enum rockchip_usb2phy_port_id { + USB2PHY_PORT_OTG, + USB2PHY_PORT_HOST, + USB2PHY_NUM_PORTS, +}; + +struct usb2phy_reg { + unsigned int offset; + unsigned int bitend; + unsigned int bitstart; + unsigned int disable; + unsigned int enable; +}; + +struct rockchip_usb2phy_port_cfg { + struct usb2phy_reg phy_sus; + struct usb2phy_reg bvalid_det_en; + struct usb2phy_reg bvalid_det_st; + struct usb2phy_reg bvalid_det_clr; + struct usb2phy_reg ls_det_en; + struct usb2phy_reg ls_det_st; + struct usb2phy_reg ls_det_clr; + struct usb2phy_reg utmi_avalid; + struct usb2phy_reg utmi_bvalid; + struct usb2phy_reg utmi_ls; + struct usb2phy_reg utmi_hstdet; +}; + +struct rockchip_usb2phy_cfg { + unsigned int reg; + const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS]; +}; + +struct rockchip_usb2phy { + void *reg_base; + struct clk phyclk; + const struct rockchip_usb2phy_cfg *phy_cfg; +}; + +static inline int property_enable(void *reg_base, + const struct usb2phy_reg *reg, bool en) +{ + unsigned int val, mask, tmp; + + tmp = en ? reg->enable : reg->disable; + mask = GENMASK(reg->bitend, reg->bitstart); + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); + + return writel(val, reg_base + reg->offset); +} + +static const +struct rockchip_usb2phy_port_cfg *us2phy_get_port(struct phy *phy) +{ + struct udevice *parent = dev_get_parent(phy->dev); + struct rockchip_usb2phy *priv = dev_get_priv(parent); + const struct rockchip_usb2phy_cfg *phy_cfg = priv->phy_cfg; + + return &phy_cfg->port_cfgs[phy->id]; +} + +static int rockchip_usb2phy_power_on(struct phy *phy) +{ + struct udevice *parent = dev_get_parent(phy->dev); + struct rockchip_usb2phy *priv = dev_get_priv(parent); + const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy); + + property_enable(priv->reg_base, &port_cfg->phy_sus, false); + + /* waiting for the utmi_clk to become stable */ + usleep_range(1500, 2000); + + return 0; +} + +static int rockchip_usb2phy_power_off(struct phy *phy) +{ + struct udevice *parent = dev_get_parent(phy->dev); + struct rockchip_usb2phy *priv = dev_get_priv(parent); + const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy); + + property_enable(priv->reg_base, &port_cfg->phy_sus, true); + + return 0; +} + +static int rockchip_usb2phy_init(struct phy *phy) +{ + struct udevice *parent = dev_get_parent(phy->dev); + struct rockchip_usb2phy *priv = dev_get_priv(parent); + const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy); + int ret; + + ret = clk_enable(&priv->phyclk); + if (ret) { + dev_err(phy->dev, "failed to enable phyclk (ret=%d)\n", ret); + return ret; + } + + if (phy->id == USB2PHY_PORT_OTG) { + property_enable(priv->reg_base, &port_cfg->bvalid_det_clr, true); + property_enable(priv->reg_base, &port_cfg->bvalid_det_en, true); + } else if (phy->id == USB2PHY_PORT_HOST) { + property_enable(priv->reg_base, &port_cfg->bvalid_det_clr, true); + property_enable(priv->reg_base, &port_cfg->bvalid_det_en, true); + } + + return 0; +} + +static int rockchip_usb2phy_exit(struct phy *phy) +{ + struct udevice *parent = dev_get_parent(phy->dev); + struct rockchip_usb2phy *priv = dev_get_priv(parent); + + clk_disable(&priv->phyclk); + + return 0; +} + +static int rockchip_usb2phy_of_xlate(struct phy *phy, + struct ofnode_phandle_args *args) +{ + const char *name = phy->dev->name; + + if (!strcasecmp(name, "host-port")) + phy->id = USB2PHY_PORT_HOST; + else if (!strcasecmp(name, "otg-port")) + phy->id = USB2PHY_PORT_OTG; + else + dev_err(phy->dev, "improper %s device\n", name); + + return 0; +} + +static struct phy_ops rockchip_usb2phy_ops = { + .init = rockchip_usb2phy_init, + .exit = rockchip_usb2phy_exit, + .power_on = rockchip_usb2phy_power_on, + .power_off = rockchip_usb2phy_power_off, + .of_xlate = rockchip_usb2phy_of_xlate, +}; + +static int rockchip_usb2phy_probe(struct udevice *dev) +{ + struct rockchip_usb2phy *priv = dev_get_priv(dev); + const struct rockchip_usb2phy_cfg *phy_cfgs; + unsigned int reg; + int index, ret; + + priv->reg_base = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + if (IS_ERR(priv->reg_base)) + return PTR_ERR(priv->reg_base); + + ret = dev_read_u32_index(dev, "reg", 1, ®); + if (ret) { + dev_err(dev, "failed to read reg property (ret = %d)\n", ret); + return ret; + } + + phy_cfgs = (const struct rockchip_usb2phy_cfg *) + dev_get_driver_data(dev); + if (!phy_cfgs) + return -EINVAL; + + /* find out a proper config which can be matched with dt. */ + index = 0; + while (phy_cfgs[index].reg) { + if (phy_cfgs[index].reg == reg) { + priv->phy_cfg = &phy_cfgs[index]; + break; + } + + ++index; + } + + if (!priv->phy_cfg) { + dev_err(dev, "failed find proper phy-cfg\n"); + return -EINVAL; + } + + ret = clk_get_by_name(dev, "phyclk", &priv->phyclk); + if (ret) { + dev_err(dev, "failed to get the phyclk (ret=%d)\n", ret); + return ret; + } + + return 0; +} + +static int rockchip_usb2phy_bind(struct udevice *dev) +{ + struct udevice *usb2phy_dev; + ofnode node; + const char *name; + int ret = 0; + + dev_for_each_subnode(node, dev) { + if (!ofnode_valid(node)) { + dev_info(dev, "subnode %s not found\n", dev->name); + return -ENXIO; + } + + name = ofnode_get_name(node); + dev_dbg(dev, "subnode %s\n", name); + + ret = device_bind_driver_to_node(dev, "rockchip_usb2phy_port", + name, node, &usb2phy_dev); + if (ret) { + dev_err(dev, + "'%s' cannot bind 'rockchip_usb2phy_port'\n", name); + return ret; + } + } + + return ret; +} + +static const struct rockchip_usb2phy_cfg rk3399_usb2phy_cfgs[] = { + { + .reg = 0xe450, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0xe454, 1, 0, 2, 1 }, + .bvalid_det_en = { 0xe3c0, 3, 3, 0, 1 }, + .bvalid_det_st = { 0xe3e0, 3, 3, 0, 1 }, + .bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 }, + .utmi_avalid = { 0xe2ac, 7, 7, 0, 1 }, + .utmi_bvalid = { 0xe2ac, 12, 12, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0xe458, 1, 0, 0x2, 0x1 }, + .ls_det_en = { 0xe3c0, 6, 6, 0, 1 }, + .ls_det_st = { 0xe3e0, 6, 6, 0, 1 }, + .ls_det_clr = { 0xe3d0, 6, 6, 0, 1 }, + .utmi_ls = { 0xe2ac, 22, 21, 0, 1 }, + .utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 } + } + }, + }, + { + .reg = 0xe460, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0xe464, 1, 0, 2, 1 }, + .bvalid_det_en = { 0xe3c0, 8, 8, 0, 1 }, + .bvalid_det_st = { 0xe3e0, 8, 8, 0, 1 }, + .bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 }, + .utmi_avalid = { 0xe2ac, 10, 10, 0, 1 }, + .utmi_bvalid = { 0xe2ac, 16, 16, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0xe468, 1, 0, 0x2, 0x1 }, + .ls_det_en = { 0xe3c0, 11, 11, 0, 1 }, + .ls_det_st = { 0xe3e0, 11, 11, 0, 1 }, + .ls_det_clr = { 0xe3d0, 11, 11, 0, 1 }, + .utmi_ls = { 0xe2ac, 26, 25, 0, 1 }, + .utmi_hstdet = { 0xe2ac, 27, 27, 0, 1 } + } + }, + }, + { /* sentinel */ } +}; + +static const struct udevice_id rockchip_usb2phy_ids[] = { + { + .compatible = "rockchip,rk3399-usb2phy", + .data = (ulong)&rk3399_usb2phy_cfgs, + }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(rockchip_usb2phy_port) = { + .name = "rockchip_usb2phy_port", + .id = UCLASS_PHY, + .ops = &rockchip_usb2phy_ops, +}; + +U_BOOT_DRIVER(rockchip_usb2phy) = { + .name = "rockchip_usb2phy", + .id = UCLASS_PHY, + .of_match = rockchip_usb2phy_ids, + .probe = rockchip_usb2phy_probe, + .bind = rockchip_usb2phy_bind, + .priv_auto_alloc_size = sizeof(struct rockchip_usb2phy), +}; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com> To: u-boot@lists.denx.de Subject: [PATCH v2 4/7] phy: rockchip: Add Rockchip USB2PHY driver Date: Wed, 6 May 2020 13:20:22 +0530 [thread overview] Message-ID: <20200506075025.1677-5-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200506075025.1677-1-jagan@amarulasolutions.com> Add Rockchip USB2PHY driver with initial support. This will help to use it for EHCI controller in host mode, and USB 3.0 controller in otg mode. More functionality like charge, vbus detection will add it in future changes. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v2: - update with Kconfig menu drivers/Makefile | 1 + drivers/phy/Kconfig | 1 + drivers/phy/rockchip/Kconfig | 14 + drivers/phy/rockchip/Makefile | 6 + drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 312 ++++++++++++++++++ 5 files changed, 334 insertions(+) create mode 100644 drivers/phy/rockchip/Kconfig create mode 100644 drivers/phy/rockchip/Makefile create mode 100644 drivers/phy/rockchip/phy-rockchip-inno-usb2.c diff --git a/drivers/Makefile b/drivers/Makefile index 4208750428..94e8c5da17 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -91,6 +91,7 @@ obj-y += dfu/ obj-$(CONFIG_PCH) += pch/ obj-y += phy/allwinner/ obj-y += phy/marvell/ +obj-y += phy/rockchip/ obj-y += rtc/ obj-y += scsi/ obj-y += sound/ diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index a72f34f0d4..e19a6c0aa3 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -217,4 +217,5 @@ config PHY_MTK_TPHY multi-ports is first version, otherwise is second veriosn, so you can easily distinguish them by banks layout. +source "drivers/phy/rockchip/Kconfig" endmenu diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig new file mode 100644 index 0000000000..d73ac695e1 --- /dev/null +++ b/drivers/phy/rockchip/Kconfig @@ -0,0 +1,14 @@ +# +# Phy drivers for Rockchip platforms +# + +menu "Rockchip PHY driver" + +config PHY_ROCKCHIP_INNO_USB2 + bool "Rockchip INNO USB2PHY Driver" + depends on ARCH_ROCKCHIP + select PHY + help + Support for Rockchip USB2.0 PHY with Innosilicon IP block. + +endmenu diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile new file mode 100644 index 0000000000..9b0cbc6acf --- /dev/null +++ b/drivers/phy/rockchip/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2020 Amarula Solutions(India) +# + +obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c new file mode 100644 index 0000000000..dd4905d834 --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Rockchip USB2.0 PHY with Innosilicon IP block driver + * + * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (C) 2020 Amarula Solutions(India) + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <dm/device_compat.h> +#include <dm/lists.h> +#include <generic-phy.h> +#include <reset.h> +#include <syscon.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <linux/iopoll.h> +#include <asm/arch-rockchip/clock.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define usleep_range(a, b) udelay((b)) +#define BIT_WRITEABLE_SHIFT 16 + +enum rockchip_usb2phy_port_id { + USB2PHY_PORT_OTG, + USB2PHY_PORT_HOST, + USB2PHY_NUM_PORTS, +}; + +struct usb2phy_reg { + unsigned int offset; + unsigned int bitend; + unsigned int bitstart; + unsigned int disable; + unsigned int enable; +}; + +struct rockchip_usb2phy_port_cfg { + struct usb2phy_reg phy_sus; + struct usb2phy_reg bvalid_det_en; + struct usb2phy_reg bvalid_det_st; + struct usb2phy_reg bvalid_det_clr; + struct usb2phy_reg ls_det_en; + struct usb2phy_reg ls_det_st; + struct usb2phy_reg ls_det_clr; + struct usb2phy_reg utmi_avalid; + struct usb2phy_reg utmi_bvalid; + struct usb2phy_reg utmi_ls; + struct usb2phy_reg utmi_hstdet; +}; + +struct rockchip_usb2phy_cfg { + unsigned int reg; + const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS]; +}; + +struct rockchip_usb2phy { + void *reg_base; + struct clk phyclk; + const struct rockchip_usb2phy_cfg *phy_cfg; +}; + +static inline int property_enable(void *reg_base, + const struct usb2phy_reg *reg, bool en) +{ + unsigned int val, mask, tmp; + + tmp = en ? reg->enable : reg->disable; + mask = GENMASK(reg->bitend, reg->bitstart); + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); + + return writel(val, reg_base + reg->offset); +} + +static const +struct rockchip_usb2phy_port_cfg *us2phy_get_port(struct phy *phy) +{ + struct udevice *parent = dev_get_parent(phy->dev); + struct rockchip_usb2phy *priv = dev_get_priv(parent); + const struct rockchip_usb2phy_cfg *phy_cfg = priv->phy_cfg; + + return &phy_cfg->port_cfgs[phy->id]; +} + +static int rockchip_usb2phy_power_on(struct phy *phy) +{ + struct udevice *parent = dev_get_parent(phy->dev); + struct rockchip_usb2phy *priv = dev_get_priv(parent); + const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy); + + property_enable(priv->reg_base, &port_cfg->phy_sus, false); + + /* waiting for the utmi_clk to become stable */ + usleep_range(1500, 2000); + + return 0; +} + +static int rockchip_usb2phy_power_off(struct phy *phy) +{ + struct udevice *parent = dev_get_parent(phy->dev); + struct rockchip_usb2phy *priv = dev_get_priv(parent); + const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy); + + property_enable(priv->reg_base, &port_cfg->phy_sus, true); + + return 0; +} + +static int rockchip_usb2phy_init(struct phy *phy) +{ + struct udevice *parent = dev_get_parent(phy->dev); + struct rockchip_usb2phy *priv = dev_get_priv(parent); + const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy); + int ret; + + ret = clk_enable(&priv->phyclk); + if (ret) { + dev_err(phy->dev, "failed to enable phyclk (ret=%d)\n", ret); + return ret; + } + + if (phy->id == USB2PHY_PORT_OTG) { + property_enable(priv->reg_base, &port_cfg->bvalid_det_clr, true); + property_enable(priv->reg_base, &port_cfg->bvalid_det_en, true); + } else if (phy->id == USB2PHY_PORT_HOST) { + property_enable(priv->reg_base, &port_cfg->bvalid_det_clr, true); + property_enable(priv->reg_base, &port_cfg->bvalid_det_en, true); + } + + return 0; +} + +static int rockchip_usb2phy_exit(struct phy *phy) +{ + struct udevice *parent = dev_get_parent(phy->dev); + struct rockchip_usb2phy *priv = dev_get_priv(parent); + + clk_disable(&priv->phyclk); + + return 0; +} + +static int rockchip_usb2phy_of_xlate(struct phy *phy, + struct ofnode_phandle_args *args) +{ + const char *name = phy->dev->name; + + if (!strcasecmp(name, "host-port")) + phy->id = USB2PHY_PORT_HOST; + else if (!strcasecmp(name, "otg-port")) + phy->id = USB2PHY_PORT_OTG; + else + dev_err(phy->dev, "improper %s device\n", name); + + return 0; +} + +static struct phy_ops rockchip_usb2phy_ops = { + .init = rockchip_usb2phy_init, + .exit = rockchip_usb2phy_exit, + .power_on = rockchip_usb2phy_power_on, + .power_off = rockchip_usb2phy_power_off, + .of_xlate = rockchip_usb2phy_of_xlate, +}; + +static int rockchip_usb2phy_probe(struct udevice *dev) +{ + struct rockchip_usb2phy *priv = dev_get_priv(dev); + const struct rockchip_usb2phy_cfg *phy_cfgs; + unsigned int reg; + int index, ret; + + priv->reg_base = syscon_get_first_range(ROCKCHIP_SYSCON_GRF); + if (IS_ERR(priv->reg_base)) + return PTR_ERR(priv->reg_base); + + ret = dev_read_u32_index(dev, "reg", 1, ®); + if (ret) { + dev_err(dev, "failed to read reg property (ret = %d)\n", ret); + return ret; + } + + phy_cfgs = (const struct rockchip_usb2phy_cfg *) + dev_get_driver_data(dev); + if (!phy_cfgs) + return -EINVAL; + + /* find out a proper config which can be matched with dt. */ + index = 0; + while (phy_cfgs[index].reg) { + if (phy_cfgs[index].reg == reg) { + priv->phy_cfg = &phy_cfgs[index]; + break; + } + + ++index; + } + + if (!priv->phy_cfg) { + dev_err(dev, "failed find proper phy-cfg\n"); + return -EINVAL; + } + + ret = clk_get_by_name(dev, "phyclk", &priv->phyclk); + if (ret) { + dev_err(dev, "failed to get the phyclk (ret=%d)\n", ret); + return ret; + } + + return 0; +} + +static int rockchip_usb2phy_bind(struct udevice *dev) +{ + struct udevice *usb2phy_dev; + ofnode node; + const char *name; + int ret = 0; + + dev_for_each_subnode(node, dev) { + if (!ofnode_valid(node)) { + dev_info(dev, "subnode %s not found\n", dev->name); + return -ENXIO; + } + + name = ofnode_get_name(node); + dev_dbg(dev, "subnode %s\n", name); + + ret = device_bind_driver_to_node(dev, "rockchip_usb2phy_port", + name, node, &usb2phy_dev); + if (ret) { + dev_err(dev, + "'%s' cannot bind 'rockchip_usb2phy_port'\n", name); + return ret; + } + } + + return ret; +} + +static const struct rockchip_usb2phy_cfg rk3399_usb2phy_cfgs[] = { + { + .reg = 0xe450, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0xe454, 1, 0, 2, 1 }, + .bvalid_det_en = { 0xe3c0, 3, 3, 0, 1 }, + .bvalid_det_st = { 0xe3e0, 3, 3, 0, 1 }, + .bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 }, + .utmi_avalid = { 0xe2ac, 7, 7, 0, 1 }, + .utmi_bvalid = { 0xe2ac, 12, 12, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0xe458, 1, 0, 0x2, 0x1 }, + .ls_det_en = { 0xe3c0, 6, 6, 0, 1 }, + .ls_det_st = { 0xe3e0, 6, 6, 0, 1 }, + .ls_det_clr = { 0xe3d0, 6, 6, 0, 1 }, + .utmi_ls = { 0xe2ac, 22, 21, 0, 1 }, + .utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 } + } + }, + }, + { + .reg = 0xe460, + .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0xe464, 1, 0, 2, 1 }, + .bvalid_det_en = { 0xe3c0, 8, 8, 0, 1 }, + .bvalid_det_st = { 0xe3e0, 8, 8, 0, 1 }, + .bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 }, + .utmi_avalid = { 0xe2ac, 10, 10, 0, 1 }, + .utmi_bvalid = { 0xe2ac, 16, 16, 0, 1 }, + }, + [USB2PHY_PORT_HOST] = { + .phy_sus = { 0xe468, 1, 0, 0x2, 0x1 }, + .ls_det_en = { 0xe3c0, 11, 11, 0, 1 }, + .ls_det_st = { 0xe3e0, 11, 11, 0, 1 }, + .ls_det_clr = { 0xe3d0, 11, 11, 0, 1 }, + .utmi_ls = { 0xe2ac, 26, 25, 0, 1 }, + .utmi_hstdet = { 0xe2ac, 27, 27, 0, 1 } + } + }, + }, + { /* sentinel */ } +}; + +static const struct udevice_id rockchip_usb2phy_ids[] = { + { + .compatible = "rockchip,rk3399-usb2phy", + .data = (ulong)&rk3399_usb2phy_cfgs, + }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(rockchip_usb2phy_port) = { + .name = "rockchip_usb2phy_port", + .id = UCLASS_PHY, + .ops = &rockchip_usb2phy_ops, +}; + +U_BOOT_DRIVER(rockchip_usb2phy) = { + .name = "rockchip_usb2phy", + .id = UCLASS_PHY, + .of_match = rockchip_usb2phy_ids, + .probe = rockchip_usb2phy_probe, + .bind = rockchip_usb2phy_bind, + .priv_auto_alloc_size = sizeof(struct rockchip_usb2phy), +}; -- 2.17.1
next prev parent reply other threads:[~2020-05-06 7:50 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-06 7:50 [PATCH v2 0/7] rockchip: PHY drivers (USB) Jagan Teki 2020-05-06 7:50 ` Jagan Teki [not found] ` <20200506075025.1677-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2020-05-06 7:50 ` [PATCH v2 1/7] clk: rk3399: Enable/Disable the USB2PHY clk Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` [PATCH v2 2/7] clk: rk3399: Set empty for TCPHY assigned-clocks Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` [PATCH v2 3/7] clk: rk3399: Enable/Disable TCPHY clocks Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` Jagan Teki [this message] 2020-05-06 7:50 ` [PATCH v2 4/7] phy: rockchip: Add Rockchip USB2PHY driver Jagan Teki 2020-05-06 7:50 ` [PATCH v2 5/7] arm64: dts: rk3399: Move u2phy into root port Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` [PATCH v2 6/7] phy: rockchip: Add Rockchip USB TypeC PHY driver Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` [PATCH v2 7/7] usb: dwc3: add dis_del_phy_power_chg_quirk Jagan Teki 2020-05-06 7:50 ` Jagan Teki [not found] ` <20200506075025.1677-8-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2020-05-06 11:44 ` Marek Vasut 2020-05-06 11:44 ` Marek Vasut
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200506075025.1677-5-jagan@amarulasolutions.com \ --to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \ --cc=chenjh-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ --cc=frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ --cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \ --cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ --cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \ --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=marek.belisko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ --cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \ --cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \ --cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \ --cc=wmc-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.