From: Samuel Holland <samuel@sholland.org> To: Thomas Gleixner <tglx@linutronix.de>, Jason Cooper <jason@lakedaemon.net>, Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>, Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, Russell King <linux@armlinux.org.uk>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org> Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com, Samuel Holland <samuel@sholland.org> Subject: [PATCH v2 6/9] ARM: dts: sunxi: a83t: Move wakeup-capable IRQs to r_intc Date: Sun, 24 May 2020 23:12:59 -0500 [thread overview] Message-ID: <20200525041302.51213-7-samuel@sholland.org> (raw) In-Reply-To: <20200525041302.51213-1-samuel@sholland.org> All IRQs that can be used to wake up the system must be routed through r_intc, so they are visible to firmware while the system is suspended. For the A83T, r_intc IRQ numbers are offset by 32 from the GIC IRQ numbers. Signed-off-by: Samuel Holland <samuel@sholland.org> --- arch/arm/boot/dts/sun8i-a83t.dtsi | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 655404d6d3a3..fcfc573eb96d 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -1130,7 +1130,8 @@ r_cir: ir@1f02000 { clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; clock-names = "apb", "ir"; resets = <&r_ccu RST_APB0_IR>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&r_intc>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; reg = <0x01f02000 0x400>; pinctrl-names = "default"; pinctrl-0 = <&r_cir_pin>; @@ -1140,14 +1141,16 @@ r_cir: ir@1f02000 { r_lradc: lradc@1f03c00 { compatible = "allwinner,sun8i-a83t-r-lradc"; reg = <0x01f03c00 0x100>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&r_intc>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&r_intc>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc16Md512>; clock-names = "apb", "hosc", "losc"; -- 2.24.1
WARNING: multiple messages have this Message-ID (diff)
From: Samuel Holland <samuel@sholland.org> To: Thomas Gleixner <tglx@linutronix.de>, Jason Cooper <jason@lakedaemon.net>, Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>, Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, Russell King <linux@armlinux.org.uk>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org> Cc: devicetree@vger.kernel.org, linux-sunxi@googlegroups.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Samuel Holland <samuel@sholland.org> Subject: [PATCH v2 6/9] ARM: dts: sunxi: a83t: Move wakeup-capable IRQs to r_intc Date: Sun, 24 May 2020 23:12:59 -0500 [thread overview] Message-ID: <20200525041302.51213-7-samuel@sholland.org> (raw) In-Reply-To: <20200525041302.51213-1-samuel@sholland.org> All IRQs that can be used to wake up the system must be routed through r_intc, so they are visible to firmware while the system is suspended. For the A83T, r_intc IRQ numbers are offset by 32 from the GIC IRQ numbers. Signed-off-by: Samuel Holland <samuel@sholland.org> --- arch/arm/boot/dts/sun8i-a83t.dtsi | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 655404d6d3a3..fcfc573eb96d 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -1130,7 +1130,8 @@ r_cir: ir@1f02000 { clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; clock-names = "apb", "ir"; resets = <&r_ccu RST_APB0_IR>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&r_intc>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; reg = <0x01f02000 0x400>; pinctrl-names = "default"; pinctrl-0 = <&r_cir_pin>; @@ -1140,14 +1141,16 @@ r_cir: ir@1f02000 { r_lradc: lradc@1f03c00 { compatible = "allwinner,sun8i-a83t-r-lradc"; reg = <0x01f03c00 0x100>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&r_intc>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&r_intc>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc16Md512>; clock-names = "apb", "hosc", "losc"; -- 2.24.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-25 4:12 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-25 4:12 [PATCH v2 0/9] sunxi: Support IRQ wakeup from deep sleep Samuel Holland 2020-05-25 4:12 ` Samuel Holland 2020-05-25 4:12 ` [PATCH v2 1/9] irqchip/sun6i-r: Use a stacked irqchip driver Samuel Holland 2020-05-25 4:12 ` Samuel Holland 2020-06-08 8:48 ` Maxime Ripard 2020-06-08 8:48 ` Maxime Ripard 2020-06-15 5:29 ` Samuel Holland 2020-06-15 5:29 ` Samuel Holland 2020-06-26 13:32 ` Maxime Ripard 2020-06-26 13:32 ` Maxime Ripard 2020-05-25 4:12 ` [PATCH v2 2/9] irqchip/sun6i-r: Add wakeup support Samuel Holland 2020-05-25 4:12 ` Samuel Holland 2020-06-08 8:49 ` Maxime Ripard 2020-06-08 8:49 ` Maxime Ripard 2020-05-25 4:12 ` [PATCH v2 3/9] dt-bindings: irq: Add a compatible for the H3 R_INTC Samuel Holland 2020-05-25 4:12 ` Samuel Holland 2020-05-28 23:50 ` Rob Herring 2020-05-28 23:50 ` Rob Herring 2020-05-25 4:12 ` [PATCH v2 4/9] ARM: dts: sunxi: h3/h5: Add r_intc node Samuel Holland 2020-05-25 4:12 ` Samuel Holland 2020-05-25 4:12 ` [PATCH v2 5/9] ARM: dts: sunxi: h3/h5: Move wakeup-capable IRQs to r_intc Samuel Holland 2020-05-25 4:12 ` Samuel Holland 2020-05-25 4:12 ` Samuel Holland [this message] 2020-05-25 4:12 ` [PATCH v2 6/9] ARM: dts: sunxi: a83t: " Samuel Holland 2020-05-25 4:13 ` [PATCH v2 7/9] arm64: dts: allwinner: a64: " Samuel Holland 2020-05-25 4:13 ` Samuel Holland 2020-05-25 4:13 ` [PATCH v2 8/9] arm64: dts: allwinner: h6: Fix indentation of IR node Samuel Holland 2020-05-25 4:13 ` Samuel Holland 2020-05-25 4:13 ` [PATCH v2 9/9] arm64: dts: allwinner: h6: Move wakeup-capable IRQs to r_intc Samuel Holland 2020-05-25 4:13 ` Samuel Holland
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200525041302.51213-7-samuel@sholland.org \ --to=samuel@sholland.org \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=jason@lakedaemon.net \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@googlegroups.com \ --cc=linux@armlinux.org.uk \ --cc=maz@kernel.org \ --cc=mripard@kernel.org \ --cc=robh+dt@kernel.org \ --cc=tglx@linutronix.de \ --cc=wens@csie.org \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.