From: Rob Herring <robh@kernel.org>
To: Maxime Ripard <maxime@cerno.tech>
Cc: linux-kernel@vger.kernel.org,
Tim Gover <tim.gover@raspberrypi.com>,
Rob Herring <robh+dt@kernel.org>, Stephen Boyd <sboyd@kernel.org>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Michael Turquette <mturquette@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
linux-clk@vger.kernel.org, Phil Elwell <phil@raspberrypi.com>,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org
Subject: Re: [PATCH v3 02/25] dt-bindings: clock: Add a binding for the RPi Firmware clocks
Date: Fri, 29 May 2020 12:14:37 -0600 [thread overview]
Message-ID: <20200529181437.GA2685096@bogus> (raw)
In-Reply-To: <919e2f2f13583d4d53d0e95b81fc3fb8a7606107.1590594293.git-series.maxime@cerno.tech>
On Wed, 27 May 2020 17:44:58 +0200, Maxime Ripard wrote:
> The firmware running on the RPi VideoCore can be used to discover and
> change the various clocks running in the BCM2711. Since devices will
> need to use them through the DT, let's add a pretty simple binding.
>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: linux-clk@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
> Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
Reviewed-by: Rob Herring <robh@kernel.org>
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Maxime Ripard <maxime@cerno.tech>
Cc: devicetree@vger.kernel.org, Tim Gover <tim.gover@raspberrypi.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
linux-kernel@vger.kernel.org, Phil Elwell <phil@raspberrypi.com>,
Rob Herring <robh+dt@kernel.org>,
bcm-kernel-feedback-list@broadcom.com,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rpi-kernel@lists.infradead.org
Subject: Re: [PATCH v3 02/25] dt-bindings: clock: Add a binding for the RPi Firmware clocks
Date: Fri, 29 May 2020 12:14:37 -0600 [thread overview]
Message-ID: <20200529181437.GA2685096@bogus> (raw)
In-Reply-To: <919e2f2f13583d4d53d0e95b81fc3fb8a7606107.1590594293.git-series.maxime@cerno.tech>
On Wed, 27 May 2020 17:44:58 +0200, Maxime Ripard wrote:
> The firmware running on the RPi VideoCore can be used to discover and
> change the various clocks running in the BCM2711. Since devices will
> need to use them through the DT, let's add a pretty simple binding.
>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: linux-clk@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
> Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-29 18:14 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 15:44 [PATCH v3 00/25] clk: bcm: rpi: Add support for BCM2711 firmware clocks Maxime Ripard
2020-05-27 15:44 ` Maxime Ripard
2020-05-27 15:44 ` [PATCH v3 01/25] dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML Maxime Ripard
2020-05-27 15:44 ` Maxime Ripard
2020-05-27 15:44 ` [PATCH v3 02/25] dt-bindings: clock: Add a binding for the RPi Firmware clocks Maxime Ripard
2020-05-27 15:44 ` Maxime Ripard
2020-05-29 18:14 ` Rob Herring [this message]
2020-05-29 18:14 ` Rob Herring
2020-05-29 21:17 ` Stephen Boyd
2020-05-29 21:17 ` Stephen Boyd
2020-05-30 16:23 ` Maxime Ripard
2020-05-30 16:23 ` Maxime Ripard
2020-05-27 15:44 ` [PATCH v3 03/25] firmware: rpi: Only create clocks device if we don't have a node for it Maxime Ripard
2020-05-27 15:44 ` Maxime Ripard
2020-06-04 17:50 ` Nicolas Saenz Julienne
2020-06-04 17:50 ` Nicolas Saenz Julienne
2020-05-27 15:45 ` [PATCH v3 04/25] clk: bcm: rpi: Allow the driver to be probed by DT Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-29 21:17 ` Stephen Boyd
2020-05-29 21:17 ` Stephen Boyd
2020-06-04 17:52 ` Nicolas Saenz Julienne
2020-06-04 17:52 ` Nicolas Saenz Julienne
2020-05-27 15:45 ` [PATCH v3 05/25] clk: bcm: rpi: Statically init clk_init_data Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-27 15:45 ` [PATCH v3 06/25] clk: bcm: rpi: Use clk_hw_register for pllb_arm Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-27 15:45 ` [PATCH v3 07/25] clk: bcm: rpi: Remove global pllb_arm clock pointer Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-27 15:45 ` [PATCH v3 08/25] clk: bcm: rpi: Make sure pllb_arm is removed Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-27 15:45 ` [PATCH v3 09/25] clk: bcm: rpi: Remove pllb_arm_lookup global pointer Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-27 15:45 ` [PATCH v3 10/25] clk: bcm: rpi: Switch to clk_hw_register_clkdev Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-27 15:45 ` [PATCH v3 11/25] clk: bcm: rpi: Make sure the clkdev lookup is removed Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-27 15:45 ` [PATCH v3 12/25] clk: bcm: rpi: Use CCF boundaries instead of rolling our own Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-06-04 18:02 ` Nicolas Saenz Julienne
2020-06-04 18:02 ` Nicolas Saenz Julienne
2020-06-05 9:28 ` Maxime Ripard
2020-06-05 9:28 ` Maxime Ripard
2020-06-05 9:34 ` Nicolas Saenz Julienne
2020-06-05 9:34 ` Nicolas Saenz Julienne
2020-05-27 15:45 ` [PATCH v3 13/25] clk: bcm: rpi: Create a data structure for the clocks Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-27 15:45 ` [PATCH v3 14/25] clk: bcm: rpi: Add clock id to data Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-27 15:45 ` [PATCH v3 15/25] clk: bcm: rpi: Pass the clocks data to the firmware function Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-27 15:45 ` [PATCH v3 16/25] clk: bcm: rpi: Rename is_prepared function Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-27 15:45 ` [PATCH v3 17/25] clk: bcm: rpi: Split pllb clock hooks Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-06-05 10:34 ` Nicolas Saenz Julienne
2020-06-05 10:34 ` Nicolas Saenz Julienne
2020-05-27 15:45 ` [PATCH v3 18/25] clk: bcm: rpi: Make the PLLB registration function return a clk_hw Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-06-05 10:38 ` Nicolas Saenz Julienne
2020-06-05 10:38 ` Nicolas Saenz Julienne
2020-05-27 15:45 ` [PATCH v3 19/25] clk: bcm: rpi: Add DT provider for the clocks Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-06-05 10:42 ` Nicolas Saenz Julienne
2020-06-05 10:42 ` Nicolas Saenz Julienne
2020-05-27 15:45 ` [PATCH v3 20/25] clk: bcm: rpi: Add an enum for the firmware clocks Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-06-05 12:04 ` Nicolas Saenz Julienne
2020-06-05 12:04 ` Nicolas Saenz Julienne
2020-06-05 13:09 ` Nicolas Saenz Julienne
2020-06-05 13:09 ` Nicolas Saenz Julienne
2020-05-27 15:45 ` [PATCH v3 21/25] clk: bcm: rpi: Discover " Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-06-05 12:45 ` Nicolas Saenz Julienne
2020-06-05 12:45 ` Nicolas Saenz Julienne
2020-05-27 15:45 ` [PATCH v3 22/25] clk: bcm: rpi: Give firmware clocks a name Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-06-05 12:49 ` Nicolas Saenz Julienne
2020-06-05 12:49 ` Nicolas Saenz Julienne
2020-05-27 15:45 ` [PATCH v3 23/25] Revert "clk: bcm2835: remove pllb" Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-27 15:45 ` [PATCH v3 24/25] clk: bcm: rpi: Remove the quirks for the CPU clock Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
2020-05-27 15:45 ` [PATCH v3 25/25] ARM: dts: bcm2711: Add firmware clocks node Maxime Ripard
2020-05-27 15:45 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200529181437.GA2685096@bogus \
--to=robh@kernel.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=maxime@cerno.tech \
--cc=mturquette@baylibre.com \
--cc=nsaenzjulienne@suse.de \
--cc=phil@raspberrypi.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tim.gover@raspberrypi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.