All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefano Stabellini <sstabellini@kernel.org>
To: jgross@suse.com, boris.ostrovsky@oracle.com, konrad.wilk@oracle.com
Cc: sstabellini@kernel.org, xen-devel@lists.xenproject.org,
	linux-kernel@vger.kernel.org, tamas@tklengyel.com,
	roman@zededa.com,
	Stefano Stabellini <stefano.stabellini@xilinx.com>
Subject: [PATCH v2 10/11] xen/arm: introduce phys/dma translations in xen_dma_sync_for_*
Date: Wed,  3 Jun 2020 15:22:46 -0700	[thread overview]
Message-ID: <20200603222247.11681-10-sstabellini@kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.21.2006031506590.6774@sstabellini-ThinkPad-T480s>

From: Stefano Stabellini <stefano.stabellini@xilinx.com>

xen_dma_sync_for_cpu, xen_dma_sync_for_device, xen_arch_need_swiotlb are
getting called passing dma addresses. On some platforms dma addresses
could be different from physical addresses. Before doing any operations
on these addresses we need to convert them back to physical addresses
using dma_to_phys.

Add dma_to_phys calls to xen_dma_sync_for_cpu, xen_dma_sync_for_device,
and xen_arch_need_swiotlb.

dma_cache_maint is fixed by the next patch.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>

---
Changes in v2:
- improve commit message
- don't use pfn_valid
---
 arch/arm/xen/mm.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c
index f2414ea40a79..bbad712a890d 100644
--- a/arch/arm/xen/mm.c
+++ b/arch/arm/xen/mm.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 #include <linux/cpu.h>
+#include <linux/dma-direct.h>
 #include <linux/dma-noncoherent.h>
 #include <linux/gfp.h>
 #include <linux/highmem.h>
@@ -75,7 +76,7 @@ void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle,
 			  phys_addr_t paddr, size_t size,
 			  enum dma_data_direction dir)
 {
-	if (pfn_valid(PFN_DOWN(handle)))
+	if (pfn_valid(PFN_DOWN(dma_to_phys(dev, handle))))
 		arch_sync_dma_for_cpu(paddr, size, dir);
 	else if (dir != DMA_TO_DEVICE)
 		dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL);
@@ -85,7 +86,7 @@ void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle,
 			     phys_addr_t paddr, size_t size,
 			     enum dma_data_direction dir)
 {
-	if (pfn_valid(PFN_DOWN(handle)))
+	if (pfn_valid(PFN_DOWN(dma_to_phys(dev, handle))))
 		arch_sync_dma_for_device(paddr, size, dir);
 	else if (dir == DMA_FROM_DEVICE)
 		dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL);
@@ -98,7 +99,7 @@ bool xen_arch_need_swiotlb(struct device *dev,
 			   dma_addr_t dev_addr)
 {
 	unsigned int xen_pfn = XEN_PFN_DOWN(phys);
-	unsigned int bfn = XEN_PFN_DOWN(dev_addr);
+	unsigned int bfn = XEN_PFN_DOWN(dma_to_phys(dev, dev_addr));
 
 	/*
 	 * The swiotlb buffer should be used if
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Stefano Stabellini <sstabellini@kernel.org>
To: jgross@suse.com, boris.ostrovsky@oracle.com, konrad.wilk@oracle.com
Cc: sstabellini@kernel.org, roman@zededa.com,
	linux-kernel@vger.kernel.org, tamas@tklengyel.com,
	xen-devel@lists.xenproject.org,
	Stefano Stabellini <stefano.stabellini@xilinx.com>
Subject: [PATCH v2 10/11] xen/arm: introduce phys/dma translations in xen_dma_sync_for_*
Date: Wed,  3 Jun 2020 15:22:46 -0700	[thread overview]
Message-ID: <20200603222247.11681-10-sstabellini@kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.21.2006031506590.6774@sstabellini-ThinkPad-T480s>

From: Stefano Stabellini <stefano.stabellini@xilinx.com>

xen_dma_sync_for_cpu, xen_dma_sync_for_device, xen_arch_need_swiotlb are
getting called passing dma addresses. On some platforms dma addresses
could be different from physical addresses. Before doing any operations
on these addresses we need to convert them back to physical addresses
using dma_to_phys.

Add dma_to_phys calls to xen_dma_sync_for_cpu, xen_dma_sync_for_device,
and xen_arch_need_swiotlb.

dma_cache_maint is fixed by the next patch.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>

---
Changes in v2:
- improve commit message
- don't use pfn_valid
---
 arch/arm/xen/mm.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c
index f2414ea40a79..bbad712a890d 100644
--- a/arch/arm/xen/mm.c
+++ b/arch/arm/xen/mm.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 #include <linux/cpu.h>
+#include <linux/dma-direct.h>
 #include <linux/dma-noncoherent.h>
 #include <linux/gfp.h>
 #include <linux/highmem.h>
@@ -75,7 +76,7 @@ void xen_dma_sync_for_cpu(struct device *dev, dma_addr_t handle,
 			  phys_addr_t paddr, size_t size,
 			  enum dma_data_direction dir)
 {
-	if (pfn_valid(PFN_DOWN(handle)))
+	if (pfn_valid(PFN_DOWN(dma_to_phys(dev, handle))))
 		arch_sync_dma_for_cpu(paddr, size, dir);
 	else if (dir != DMA_TO_DEVICE)
 		dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL);
@@ -85,7 +86,7 @@ void xen_dma_sync_for_device(struct device *dev, dma_addr_t handle,
 			     phys_addr_t paddr, size_t size,
 			     enum dma_data_direction dir)
 {
-	if (pfn_valid(PFN_DOWN(handle)))
+	if (pfn_valid(PFN_DOWN(dma_to_phys(dev, handle))))
 		arch_sync_dma_for_device(paddr, size, dir);
 	else if (dir == DMA_FROM_DEVICE)
 		dma_cache_maint(handle, size, GNTTAB_CACHE_INVAL);
@@ -98,7 +99,7 @@ bool xen_arch_need_swiotlb(struct device *dev,
 			   dma_addr_t dev_addr)
 {
 	unsigned int xen_pfn = XEN_PFN_DOWN(phys);
-	unsigned int bfn = XEN_PFN_DOWN(dev_addr);
+	unsigned int bfn = XEN_PFN_DOWN(dma_to_phys(dev, dev_addr));
 
 	/*
 	 * The swiotlb buffer should be used if
-- 
2.17.1



  parent reply	other threads:[~2020-06-03 22:23 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-03 22:22 [PATCH v2 00/11] fix swiotlb-xen for RPi4 Stefano Stabellini
2020-06-03 22:22 ` Stefano Stabellini
2020-06-03 22:22 ` [PATCH v2 01/11] swiotlb-xen: use vmalloc_to_page on vmalloc virt addresses Stefano Stabellini
2020-06-03 22:22   ` Stefano Stabellini
2020-06-08  7:04   ` Christoph Hellwig
2020-06-08  7:04     ` Christoph Hellwig
2020-06-08 22:53     ` Stefano Stabellini
2020-06-08 22:53       ` Stefano Stabellini
2020-06-03 22:22 ` [PATCH v2 02/11] swiotlb-xen: remove start_dma_addr Stefano Stabellini
2020-06-03 22:22   ` Stefano Stabellini
2020-06-03 22:22 ` [PATCH v2 03/11] swiotlb-xen: add struct device* parameter to xen_phys_to_bus Stefano Stabellini
2020-06-03 22:22   ` Stefano Stabellini
2020-06-08  7:05   ` Christoph Hellwig
2020-06-08  7:05     ` Christoph Hellwig
2020-06-08 22:55     ` Stefano Stabellini
2020-06-08 22:55       ` Stefano Stabellini
2020-06-03 22:22 ` [PATCH v2 04/11] swiotlb-xen: add struct device* parameter to xen_bus_to_phys Stefano Stabellini
2020-06-03 22:22   ` Stefano Stabellini
2020-06-08  7:05   ` Christoph Hellwig
2020-06-08  7:05     ` Christoph Hellwig
2020-06-03 22:22 ` [PATCH v2 05/11] swiotlb-xen: add struct device* parameter to xen_dma_sync_for_cpu Stefano Stabellini
2020-06-03 22:22   ` Stefano Stabellini
2020-06-03 22:22 ` [PATCH v2 06/11] swiotlb-xen: add struct device* parameter to xen_dma_sync_for_device Stefano Stabellini
2020-06-03 22:22   ` Stefano Stabellini
2020-06-03 22:22 ` [PATCH v2 07/11] swiotlb-xen: add struct device* parameter to is_xen_swiotlb_buffer Stefano Stabellini
2020-06-03 22:22   ` Stefano Stabellini
2020-06-03 22:22 ` [PATCH v2 08/11] swiotlb-xen: introduce phys_to_dma/dma_to_phys translations Stefano Stabellini
2020-06-03 22:22   ` Stefano Stabellini
2020-06-04 17:46   ` Boris Ostrovsky
2020-06-04 17:46     ` Boris Ostrovsky
2020-06-04 17:47     ` boris.ostrovsky
2020-06-04 17:47       ` boris.ostrovsky
2020-06-08  7:08   ` Christoph Hellwig
2020-06-08  7:08     ` Christoph Hellwig
2020-06-08 23:06     ` Stefano Stabellini
2020-06-08 23:06       ` Stefano Stabellini
2020-06-09  3:46       ` Stefano Stabellini
2020-06-09  3:46         ` Stefano Stabellini
2020-06-09  5:32       ` Christoph Hellwig
2020-06-09  5:32         ` Christoph Hellwig
2020-06-09 21:50         ` Stefano Stabellini
2020-06-09 21:50           ` Stefano Stabellini
2020-06-03 22:22 ` [PATCH v2 09/11] swiotlb-xen: rename xen_phys_to_bus to xen_phys_to_dma and xen_bus_to_phys to xen_dma_to_phys Stefano Stabellini
2020-06-03 22:22   ` Stefano Stabellini
2020-06-08  7:09   ` Christoph Hellwig
2020-06-08  7:09     ` Christoph Hellwig
2020-06-03 22:22 ` Stefano Stabellini [this message]
2020-06-03 22:22   ` [PATCH v2 10/11] xen/arm: introduce phys/dma translations in xen_dma_sync_for_* Stefano Stabellini
2020-06-08  7:12   ` Christoph Hellwig
2020-06-08  7:12     ` Christoph Hellwig
2020-06-09  0:38     ` Stefano Stabellini
2020-06-09  0:38       ` Stefano Stabellini
2020-06-09  5:38       ` Christoph Hellwig
2020-06-09  5:38         ` Christoph Hellwig
2020-06-09  5:39         ` Christoph Hellwig
2020-06-09  5:39           ` Christoph Hellwig
2020-06-09 21:50           ` Stefano Stabellini
2020-06-09 21:50             ` Stefano Stabellini
2020-06-03 22:22 ` [PATCH v2 11/11] xen/arm: call dma_to_phys on the dma_addr_t parameter of dma_cache_maint Stefano Stabellini
2020-06-03 22:22   ` Stefano Stabellini
2020-06-04 18:32 ` [PATCH v2 00/11] fix swiotlb-xen for RPi4 Boris Ostrovsky
2020-06-04 18:32   ` Boris Ostrovsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200603222247.11681-10-sstabellini@kernel.org \
    --to=sstabellini@kernel.org \
    --cc=boris.ostrovsky@oracle.com \
    --cc=jgross@suse.com \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=roman@zededa.com \
    --cc=stefano.stabellini@xilinx.com \
    --cc=tamas@tklengyel.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.