From: Dan Murphy <dmurphy@ti.com> To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <perex@perex.cz>, <tiwai@suse.com> Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>, <robh@kernel.org>, <devicetree@vger.kernel.org>, Dan Murphy <dmurphy@ti.com> Subject: [PATCH v6 6/7] ASoC: tas2562: Add voltage sense slot configuration Date: Wed, 24 Jun 2020 12:49:31 -0500 [thread overview] Message-ID: <20200624174932.9604-7-dmurphy@ti.com> (raw) In-Reply-To: <20200624174932.9604-1-dmurphy@ti.com> Add Vsense slot configuration based on the device tree. Adding this property enables the slot programming to be moved to the tdm_set_slot callback. This in affect sets the slots for the Isense and Vsense and enabling this these modes are now based on whether these features were powered on or not. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- sound/soc/codecs/tas2562.c | 65 ++++++++++++++++++++++++++++++-------- 1 file changed, 51 insertions(+), 14 deletions(-) diff --git a/sound/soc/codecs/tas2562.c b/sound/soc/codecs/tas2562.c index 2f1d4b697f01..b0b7cef79433 100644 --- a/sound/soc/codecs/tas2562.c +++ b/sound/soc/codecs/tas2562.c @@ -224,12 +224,26 @@ static int tas2562_set_dai_tdm_slot(struct snd_soc_dai *dai, if (ret < 0) return ret; + ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG5, + TAS2562_TDM_CFG5_VSNS_SLOT_MASK, + tas2562->v_sense_slot); + if (ret < 0) + return ret; + + ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG6, + TAS2562_TDM_CFG6_ISNS_SLOT_MASK, + tas2562->i_sense_slot); + if (ret < 0) + return ret; + return 0; } static int tas2562_set_bitwidth(struct tas2562_data *tas2562, int bitwidth) { int ret; + int val; + int sense_en; switch (bitwidth) { case SNDRV_PCM_FORMAT_S16_LE: @@ -237,21 +251,18 @@ static int tas2562_set_bitwidth(struct tas2562_data *tas2562, int bitwidth) TAS2562_TDM_CFG2, TAS2562_TDM_CFG2_RXWLEN_MASK, TAS2562_TDM_CFG2_RXWLEN_16B); - tas2562->v_sense_slot = tas2562->i_sense_slot + 2; break; case SNDRV_PCM_FORMAT_S24_LE: snd_soc_component_update_bits(tas2562->component, TAS2562_TDM_CFG2, TAS2562_TDM_CFG2_RXWLEN_MASK, TAS2562_TDM_CFG2_RXWLEN_24B); - tas2562->v_sense_slot = tas2562->i_sense_slot + 4; break; case SNDRV_PCM_FORMAT_S32_LE: snd_soc_component_update_bits(tas2562->component, TAS2562_TDM_CFG2, TAS2562_TDM_CFG2_RXWLEN_MASK, TAS2562_TDM_CFG2_RXWLEN_32B); - tas2562->v_sense_slot = tas2562->i_sense_slot + 4; break; default: @@ -259,17 +270,27 @@ static int tas2562_set_bitwidth(struct tas2562_data *tas2562, int bitwidth) return -EINVAL; } - ret = snd_soc_component_update_bits(tas2562->component, - TAS2562_TDM_CFG5, - TAS2562_TDM_CFG5_VSNS_EN | TAS2562_TDM_CFG5_VSNS_SLOT_MASK, - TAS2562_TDM_CFG5_VSNS_EN | tas2562->v_sense_slot); + val = snd_soc_component_read(tas2562->component, TAS2562_PWR_CTRL); + if (val < 0) + return val; + + if (val & (1 << TAS2562_VSENSE_POWER_EN)) + sense_en = 0; + else + sense_en = TAS2562_TDM_CFG5_VSNS_EN; + + ret = snd_soc_component_update_bits(tas2562->component, TAS2562_TDM_CFG5, + TAS2562_TDM_CFG5_VSNS_EN, sense_en); if (ret < 0) return ret; - ret = snd_soc_component_update_bits(tas2562->component, - TAS2562_TDM_CFG6, - TAS2562_TDM_CFG6_ISNS_EN | TAS2562_TDM_CFG6_ISNS_SLOT_MASK, - TAS2562_TDM_CFG6_ISNS_EN | tas2562->i_sense_slot); + if (val & (1 << TAS2562_ISENSE_POWER_EN)) + sense_en = 0; + else + sense_en = TAS2562_TDM_CFG6_ISNS_EN; + + ret = snd_soc_component_update_bits(tas2562->component, TAS2562_TDM_CFG6, + TAS2562_TDM_CFG6_ISNS_EN, sense_en); if (ret < 0) return ret; @@ -645,9 +666,25 @@ static int tas2562_parse_dt(struct tas2562_data *tas2562) ret = fwnode_property_read_u32(dev->fwnode, "ti,imon-slot-no", &tas2562->i_sense_slot); - if (ret) - dev_err(dev, "Looking up %s property failed %d\n", - "ti,imon-slot-no", ret); + if (ret) { + dev_err(dev, "Property %s is missing setting default slot\n", + "ti,imon-slot-no"); + tas2562->i_sense_slot = 0; + } + + + ret = fwnode_property_read_u32(dev->fwnode, "ti,vmon-slot-no", + &tas2562->v_sense_slot); + if (ret) { + dev_info(dev, "Property %s is missing setting default slot\n", + "ti,vmon-slot-no"); + tas2562->v_sense_slot = 2; + } + + if (tas2562->v_sense_slot < tas2562->i_sense_slot) { + dev_err(dev, "Vsense slot must be greater than Isense slot\n"); + return -EINVAL; + } return ret; } -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com> To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <perex@perex.cz>, <tiwai@suse.com> Cc: robh@kernel.org, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Dan Murphy <dmurphy@ti.com>, devicetree@vger.kernel.org Subject: [PATCH v6 6/7] ASoC: tas2562: Add voltage sense slot configuration Date: Wed, 24 Jun 2020 12:49:31 -0500 [thread overview] Message-ID: <20200624174932.9604-7-dmurphy@ti.com> (raw) In-Reply-To: <20200624174932.9604-1-dmurphy@ti.com> Add Vsense slot configuration based on the device tree. Adding this property enables the slot programming to be moved to the tdm_set_slot callback. This in affect sets the slots for the Isense and Vsense and enabling this these modes are now based on whether these features were powered on or not. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- sound/soc/codecs/tas2562.c | 65 ++++++++++++++++++++++++++++++-------- 1 file changed, 51 insertions(+), 14 deletions(-) diff --git a/sound/soc/codecs/tas2562.c b/sound/soc/codecs/tas2562.c index 2f1d4b697f01..b0b7cef79433 100644 --- a/sound/soc/codecs/tas2562.c +++ b/sound/soc/codecs/tas2562.c @@ -224,12 +224,26 @@ static int tas2562_set_dai_tdm_slot(struct snd_soc_dai *dai, if (ret < 0) return ret; + ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG5, + TAS2562_TDM_CFG5_VSNS_SLOT_MASK, + tas2562->v_sense_slot); + if (ret < 0) + return ret; + + ret = snd_soc_component_update_bits(component, TAS2562_TDM_CFG6, + TAS2562_TDM_CFG6_ISNS_SLOT_MASK, + tas2562->i_sense_slot); + if (ret < 0) + return ret; + return 0; } static int tas2562_set_bitwidth(struct tas2562_data *tas2562, int bitwidth) { int ret; + int val; + int sense_en; switch (bitwidth) { case SNDRV_PCM_FORMAT_S16_LE: @@ -237,21 +251,18 @@ static int tas2562_set_bitwidth(struct tas2562_data *tas2562, int bitwidth) TAS2562_TDM_CFG2, TAS2562_TDM_CFG2_RXWLEN_MASK, TAS2562_TDM_CFG2_RXWLEN_16B); - tas2562->v_sense_slot = tas2562->i_sense_slot + 2; break; case SNDRV_PCM_FORMAT_S24_LE: snd_soc_component_update_bits(tas2562->component, TAS2562_TDM_CFG2, TAS2562_TDM_CFG2_RXWLEN_MASK, TAS2562_TDM_CFG2_RXWLEN_24B); - tas2562->v_sense_slot = tas2562->i_sense_slot + 4; break; case SNDRV_PCM_FORMAT_S32_LE: snd_soc_component_update_bits(tas2562->component, TAS2562_TDM_CFG2, TAS2562_TDM_CFG2_RXWLEN_MASK, TAS2562_TDM_CFG2_RXWLEN_32B); - tas2562->v_sense_slot = tas2562->i_sense_slot + 4; break; default: @@ -259,17 +270,27 @@ static int tas2562_set_bitwidth(struct tas2562_data *tas2562, int bitwidth) return -EINVAL; } - ret = snd_soc_component_update_bits(tas2562->component, - TAS2562_TDM_CFG5, - TAS2562_TDM_CFG5_VSNS_EN | TAS2562_TDM_CFG5_VSNS_SLOT_MASK, - TAS2562_TDM_CFG5_VSNS_EN | tas2562->v_sense_slot); + val = snd_soc_component_read(tas2562->component, TAS2562_PWR_CTRL); + if (val < 0) + return val; + + if (val & (1 << TAS2562_VSENSE_POWER_EN)) + sense_en = 0; + else + sense_en = TAS2562_TDM_CFG5_VSNS_EN; + + ret = snd_soc_component_update_bits(tas2562->component, TAS2562_TDM_CFG5, + TAS2562_TDM_CFG5_VSNS_EN, sense_en); if (ret < 0) return ret; - ret = snd_soc_component_update_bits(tas2562->component, - TAS2562_TDM_CFG6, - TAS2562_TDM_CFG6_ISNS_EN | TAS2562_TDM_CFG6_ISNS_SLOT_MASK, - TAS2562_TDM_CFG6_ISNS_EN | tas2562->i_sense_slot); + if (val & (1 << TAS2562_ISENSE_POWER_EN)) + sense_en = 0; + else + sense_en = TAS2562_TDM_CFG6_ISNS_EN; + + ret = snd_soc_component_update_bits(tas2562->component, TAS2562_TDM_CFG6, + TAS2562_TDM_CFG6_ISNS_EN, sense_en); if (ret < 0) return ret; @@ -645,9 +666,25 @@ static int tas2562_parse_dt(struct tas2562_data *tas2562) ret = fwnode_property_read_u32(dev->fwnode, "ti,imon-slot-no", &tas2562->i_sense_slot); - if (ret) - dev_err(dev, "Looking up %s property failed %d\n", - "ti,imon-slot-no", ret); + if (ret) { + dev_err(dev, "Property %s is missing setting default slot\n", + "ti,imon-slot-no"); + tas2562->i_sense_slot = 0; + } + + + ret = fwnode_property_read_u32(dev->fwnode, "ti,vmon-slot-no", + &tas2562->v_sense_slot); + if (ret) { + dev_info(dev, "Property %s is missing setting default slot\n", + "ti,vmon-slot-no"); + tas2562->v_sense_slot = 2; + } + + if (tas2562->v_sense_slot < tas2562->i_sense_slot) { + dev_err(dev, "Vsense slot must be greater than Isense slot\n"); + return -EINVAL; + } return ret; } -- 2.26.2
next prev parent reply other threads:[~2020-06-24 17:50 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-06-24 17:49 [PATCH v6 0/7] TAS2562 issue fixes and slot programming Dan Murphy 2020-06-24 17:49 ` Dan Murphy 2020-06-24 17:49 ` [PATCH v6 1/7] dt-bindings: tas2562: Fix shut-down gpio property Dan Murphy 2020-06-24 17:49 ` Dan Murphy 2020-06-24 17:49 ` [PATCH v6 2/7] ASoC: tas2562: Update shutdown GPIO property Dan Murphy 2020-06-24 17:49 ` Dan Murphy 2020-06-24 17:49 ` [PATCH v6 3/7] ASoC: tas2562: Fix format issue for extra space before a comma Dan Murphy 2020-06-24 17:49 ` Dan Murphy 2020-06-24 17:49 ` [PATCH v6 4/7] ASoC: tas2562: Add rx and tx slot programming Dan Murphy 2020-06-24 17:49 ` Dan Murphy 2020-06-24 22:08 ` Dan Murphy 2020-06-24 22:08 ` Dan Murphy 2020-06-24 17:49 ` [PATCH v6 5/7] dt-bindings: tas2562: Add voltage sense slot property Dan Murphy 2020-06-24 17:49 ` Dan Murphy 2020-06-24 17:49 ` Dan Murphy [this message] 2020-06-24 17:49 ` [PATCH v6 6/7] ASoC: tas2562: Add voltage sense slot configuration Dan Murphy 2020-06-24 17:49 ` [PATCH v6 7/7] dt-bindings: tas2562: Convert the tas2562 binding to yaml Dan Murphy 2020-06-24 17:49 ` Dan Murphy 2020-06-25 19:11 ` [PATCH v6 0/7] TAS2562 issue fixes and slot programming Mark Brown 2020-06-25 19:11 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200624174932.9604-7-dmurphy@ti.com \ --to=dmurphy@ti.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=perex@perex.cz \ --cc=robh@kernel.org \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.