All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ard Biesheuvel <ardb@kernel.org>
To: linux-crypto@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
	linux-amlogic@lists.infradead.org,
	Ard Biesheuvel <ardb@kernel.org>,
	Corentin Labbe <clabbe.montjoie@gmail.com>,
	Herbert Xu <herbert@gondor.apana.org.au>,
	"David S. Miller" <davem@davemloft.net>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Tom Lendacky <thomas.lendacky@amd.com>,
	Ayush Sawal <ayush.sawal@chelsio.com>,
	Vinay Kumar Yadav <vinay.yadav@chelsio.com>,
	Rohit Maheshwari <rohitm@chelsio.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Jamie Iles <jamie@jamieiles.com>,
	Eric Biggers <ebiggers@google.com>, Tero Kristo <t-kristo@ti.com>,
	Matthias Brugger <matthias.bgg@gmail.com>
Subject: [PATCH v2 10/13] crypto: picoxcell - permit asynchronous skcipher as fallback
Date: Sat, 27 Jun 2020 10:36:20 +0200	[thread overview]
Message-ID: <20200627083623.2428333-11-ardb@kernel.org> (raw)
In-Reply-To: <20200627083623.2428333-1-ardb@kernel.org>

Even though the picoxcell driver implements asynchronous versions of
ecb(aes) and cbc(aes), the fallbacks it allocates are required to be
synchronous. Given that SIMD based software implementations are usually
asynchronous as well, even though they rarely complete asynchronously
(this typically only happens in cases where the request was made from
softirq context, while SIMD was already in use in the task context that
it interrupted), these implementations are disregarded, and either the
generic C version or another table based version implemented in assembler
is selected instead.

Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 drivers/crypto/picoxcell_crypto.c | 34 +++++++++++---------
 1 file changed, 19 insertions(+), 15 deletions(-)

diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 7384e91c8b32..eea75c7cbdf2 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -86,6 +86,7 @@ struct spacc_req {
 	dma_addr_t			src_addr, dst_addr;
 	struct spacc_ddt		*src_ddt, *dst_ddt;
 	void				(*complete)(struct spacc_req *req);
+	struct skcipher_request		fallback_req;	// keep at the end
 };
 
 struct spacc_aead {
@@ -158,7 +159,7 @@ struct spacc_ablk_ctx {
 	 * The fallback cipher. If the operation can't be done in hardware,
 	 * fallback to a software version.
 	 */
-	struct crypto_sync_skcipher	*sw_cipher;
+	struct crypto_skcipher		*sw_cipher;
 };
 
 /* AEAD cipher context. */
@@ -792,13 +793,13 @@ static int spacc_aes_setkey(struct crypto_skcipher *cipher, const u8 *key,
 		 * Set the fallback transform to use the same request flags as
 		 * the hardware transform.
 		 */
-		crypto_sync_skcipher_clear_flags(ctx->sw_cipher,
+		crypto_skcipher_clear_flags(ctx->sw_cipher,
 					    CRYPTO_TFM_REQ_MASK);
-		crypto_sync_skcipher_set_flags(ctx->sw_cipher,
+		crypto_skcipher_set_flags(ctx->sw_cipher,
 					  cipher->base.crt_flags &
 					  CRYPTO_TFM_REQ_MASK);
 
-		err = crypto_sync_skcipher_setkey(ctx->sw_cipher, key, len);
+		err = crypto_skcipher_setkey(ctx->sw_cipher, key, len);
 		if (err)
 			goto sw_setkey_failed;
 	}
@@ -900,7 +901,7 @@ static int spacc_ablk_do_fallback(struct skcipher_request *req,
 	struct crypto_tfm *old_tfm =
 	    crypto_skcipher_tfm(crypto_skcipher_reqtfm(req));
 	struct spacc_ablk_ctx *ctx = crypto_tfm_ctx(old_tfm);
-	SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->sw_cipher);
+	struct spacc_req *dev_req = skcipher_request_ctx(req);
 	int err;
 
 	/*
@@ -908,13 +909,13 @@ static int spacc_ablk_do_fallback(struct skcipher_request *req,
 	 * the ciphering has completed, put the old transform back into the
 	 * request.
 	 */
-	skcipher_request_set_sync_tfm(subreq, ctx->sw_cipher);
-	skcipher_request_set_callback(subreq, req->base.flags, NULL, NULL);
-	skcipher_request_set_crypt(subreq, req->src, req->dst,
+	skcipher_request_set_tfm(&dev_req->fallback_req, ctx->sw_cipher);
+	skcipher_request_set_callback(&dev_req->fallback_req, req->base.flags,
+				      req->base.complete, req->base.data);
+	skcipher_request_set_crypt(&dev_req->fallback_req, req->src, req->dst,
 				   req->cryptlen, req->iv);
-	err = is_encrypt ? crypto_skcipher_encrypt(subreq) :
-			   crypto_skcipher_decrypt(subreq);
-	skcipher_request_zero(subreq);
+	err = is_encrypt ? crypto_skcipher_encrypt(&dev_req->fallback_req) :
+			   crypto_skcipher_decrypt(&dev_req->fallback_req);
 
 	return err;
 }
@@ -1007,19 +1008,22 @@ static int spacc_ablk_init_tfm(struct crypto_skcipher *tfm)
 	ctx->generic.flags = spacc_alg->type;
 	ctx->generic.engine = engine;
 	if (alg->base.cra_flags & CRYPTO_ALG_NEED_FALLBACK) {
-		ctx->sw_cipher = crypto_alloc_sync_skcipher(
+		ctx->sw_cipher = crypto_alloc_skcipher(
 			alg->base.cra_name, 0, CRYPTO_ALG_NEED_FALLBACK);
 		if (IS_ERR(ctx->sw_cipher)) {
 			dev_warn(engine->dev, "failed to allocate fallback for %s\n",
 				 alg->base.cra_name);
 			return PTR_ERR(ctx->sw_cipher);
 		}
+		crypto_skcipher_set_reqsize(tfm, sizeof(struct spacc_req) +
+						 crypto_skcipher_reqsize(ctx->sw_cipher));
+	} else {
+		crypto_skcipher_set_reqsize(tfm, sizeof(struct spacc_req));
 	}
+
 	ctx->generic.key_offs = spacc_alg->key_offs;
 	ctx->generic.iv_offs = spacc_alg->iv_offs;
 
-	crypto_skcipher_set_reqsize(tfm, sizeof(struct spacc_req));
-
 	return 0;
 }
 
@@ -1027,7 +1031,7 @@ static void spacc_ablk_exit_tfm(struct crypto_skcipher *tfm)
 {
 	struct spacc_ablk_ctx *ctx = crypto_skcipher_ctx(tfm);
 
-	crypto_free_sync_skcipher(ctx->sw_cipher);
+	crypto_free_skcipher(ctx->sw_cipher);
 }
 
 static int spacc_ablk_encrypt(struct skcipher_request *req)
-- 
2.27.0


WARNING: multiple messages have this Message-ID (diff)
From: Ard Biesheuvel <ardb@kernel.org>
To: linux-crypto@vger.kernel.org
Cc: Eric Biggers <ebiggers@google.com>,
	Corentin Labbe <clabbe.montjoie@gmail.com>,
	Ayush Sawal <ayush.sawal@chelsio.com>,
	Jamie Iles <jamie@jamieiles.com>,
	Fabio Estevam <festevam@gmail.com>,
	Ard Biesheuvel <ardb@kernel.org>,
	Herbert Xu <herbert@gondor.apana.org.au>,
	Rohit Maheshwari <rohitm@chelsio.com>,
	Chen-Yu Tsai <wens@csie.org>, NXP Linux Team <linux-imx@nxp.com>,
	Tom Lendacky <thomas.lendacky@amd.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Vinay Kumar Yadav <vinay.yadav@chelsio.com>,
	Maxime Ripard <mripard@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-amlogic@lists.infradead.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Tero Kristo <t-kristo@ti.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	"David S. Miller" <davem@davemloft.net>
Subject: [PATCH v2 10/13] crypto: picoxcell - permit asynchronous skcipher as fallback
Date: Sat, 27 Jun 2020 10:36:20 +0200	[thread overview]
Message-ID: <20200627083623.2428333-11-ardb@kernel.org> (raw)
In-Reply-To: <20200627083623.2428333-1-ardb@kernel.org>

Even though the picoxcell driver implements asynchronous versions of
ecb(aes) and cbc(aes), the fallbacks it allocates are required to be
synchronous. Given that SIMD based software implementations are usually
asynchronous as well, even though they rarely complete asynchronously
(this typically only happens in cases where the request was made from
softirq context, while SIMD was already in use in the task context that
it interrupted), these implementations are disregarded, and either the
generic C version or another table based version implemented in assembler
is selected instead.

Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 drivers/crypto/picoxcell_crypto.c | 34 +++++++++++---------
 1 file changed, 19 insertions(+), 15 deletions(-)

diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 7384e91c8b32..eea75c7cbdf2 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -86,6 +86,7 @@ struct spacc_req {
 	dma_addr_t			src_addr, dst_addr;
 	struct spacc_ddt		*src_ddt, *dst_ddt;
 	void				(*complete)(struct spacc_req *req);
+	struct skcipher_request		fallback_req;	// keep at the end
 };
 
 struct spacc_aead {
@@ -158,7 +159,7 @@ struct spacc_ablk_ctx {
 	 * The fallback cipher. If the operation can't be done in hardware,
 	 * fallback to a software version.
 	 */
-	struct crypto_sync_skcipher	*sw_cipher;
+	struct crypto_skcipher		*sw_cipher;
 };
 
 /* AEAD cipher context. */
@@ -792,13 +793,13 @@ static int spacc_aes_setkey(struct crypto_skcipher *cipher, const u8 *key,
 		 * Set the fallback transform to use the same request flags as
 		 * the hardware transform.
 		 */
-		crypto_sync_skcipher_clear_flags(ctx->sw_cipher,
+		crypto_skcipher_clear_flags(ctx->sw_cipher,
 					    CRYPTO_TFM_REQ_MASK);
-		crypto_sync_skcipher_set_flags(ctx->sw_cipher,
+		crypto_skcipher_set_flags(ctx->sw_cipher,
 					  cipher->base.crt_flags &
 					  CRYPTO_TFM_REQ_MASK);
 
-		err = crypto_sync_skcipher_setkey(ctx->sw_cipher, key, len);
+		err = crypto_skcipher_setkey(ctx->sw_cipher, key, len);
 		if (err)
 			goto sw_setkey_failed;
 	}
@@ -900,7 +901,7 @@ static int spacc_ablk_do_fallback(struct skcipher_request *req,
 	struct crypto_tfm *old_tfm =
 	    crypto_skcipher_tfm(crypto_skcipher_reqtfm(req));
 	struct spacc_ablk_ctx *ctx = crypto_tfm_ctx(old_tfm);
-	SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->sw_cipher);
+	struct spacc_req *dev_req = skcipher_request_ctx(req);
 	int err;
 
 	/*
@@ -908,13 +909,13 @@ static int spacc_ablk_do_fallback(struct skcipher_request *req,
 	 * the ciphering has completed, put the old transform back into the
 	 * request.
 	 */
-	skcipher_request_set_sync_tfm(subreq, ctx->sw_cipher);
-	skcipher_request_set_callback(subreq, req->base.flags, NULL, NULL);
-	skcipher_request_set_crypt(subreq, req->src, req->dst,
+	skcipher_request_set_tfm(&dev_req->fallback_req, ctx->sw_cipher);
+	skcipher_request_set_callback(&dev_req->fallback_req, req->base.flags,
+				      req->base.complete, req->base.data);
+	skcipher_request_set_crypt(&dev_req->fallback_req, req->src, req->dst,
 				   req->cryptlen, req->iv);
-	err = is_encrypt ? crypto_skcipher_encrypt(subreq) :
-			   crypto_skcipher_decrypt(subreq);
-	skcipher_request_zero(subreq);
+	err = is_encrypt ? crypto_skcipher_encrypt(&dev_req->fallback_req) :
+			   crypto_skcipher_decrypt(&dev_req->fallback_req);
 
 	return err;
 }
@@ -1007,19 +1008,22 @@ static int spacc_ablk_init_tfm(struct crypto_skcipher *tfm)
 	ctx->generic.flags = spacc_alg->type;
 	ctx->generic.engine = engine;
 	if (alg->base.cra_flags & CRYPTO_ALG_NEED_FALLBACK) {
-		ctx->sw_cipher = crypto_alloc_sync_skcipher(
+		ctx->sw_cipher = crypto_alloc_skcipher(
 			alg->base.cra_name, 0, CRYPTO_ALG_NEED_FALLBACK);
 		if (IS_ERR(ctx->sw_cipher)) {
 			dev_warn(engine->dev, "failed to allocate fallback for %s\n",
 				 alg->base.cra_name);
 			return PTR_ERR(ctx->sw_cipher);
 		}
+		crypto_skcipher_set_reqsize(tfm, sizeof(struct spacc_req) +
+						 crypto_skcipher_reqsize(ctx->sw_cipher));
+	} else {
+		crypto_skcipher_set_reqsize(tfm, sizeof(struct spacc_req));
 	}
+
 	ctx->generic.key_offs = spacc_alg->key_offs;
 	ctx->generic.iv_offs = spacc_alg->iv_offs;
 
-	crypto_skcipher_set_reqsize(tfm, sizeof(struct spacc_req));
-
 	return 0;
 }
 
@@ -1027,7 +1031,7 @@ static void spacc_ablk_exit_tfm(struct crypto_skcipher *tfm)
 {
 	struct spacc_ablk_ctx *ctx = crypto_skcipher_ctx(tfm);
 
-	crypto_free_sync_skcipher(ctx->sw_cipher);
+	crypto_free_skcipher(ctx->sw_cipher);
 }
 
 static int spacc_ablk_encrypt(struct skcipher_request *req)
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Ard Biesheuvel <ardb@kernel.org>
To: linux-crypto@vger.kernel.org
Cc: Eric Biggers <ebiggers@google.com>,
	Corentin Labbe <clabbe.montjoie@gmail.com>,
	Ayush Sawal <ayush.sawal@chelsio.com>,
	Jamie Iles <jamie@jamieiles.com>,
	Fabio Estevam <festevam@gmail.com>,
	Ard Biesheuvel <ardb@kernel.org>,
	Herbert Xu <herbert@gondor.apana.org.au>,
	Rohit Maheshwari <rohitm@chelsio.com>,
	Chen-Yu Tsai <wens@csie.org>, NXP Linux Team <linux-imx@nxp.com>,
	Tom Lendacky <thomas.lendacky@amd.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Vinay Kumar Yadav <vinay.yadav@chelsio.com>,
	Maxime Ripard <mripard@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-amlogic@lists.infradead.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Tero Kristo <t-kristo@ti.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	"David S. Miller" <davem@davemloft.net>
Subject: [PATCH v2 10/13] crypto: picoxcell - permit asynchronous skcipher as fallback
Date: Sat, 27 Jun 2020 10:36:20 +0200	[thread overview]
Message-ID: <20200627083623.2428333-11-ardb@kernel.org> (raw)
In-Reply-To: <20200627083623.2428333-1-ardb@kernel.org>

Even though the picoxcell driver implements asynchronous versions of
ecb(aes) and cbc(aes), the fallbacks it allocates are required to be
synchronous. Given that SIMD based software implementations are usually
asynchronous as well, even though they rarely complete asynchronously
(this typically only happens in cases where the request was made from
softirq context, while SIMD was already in use in the task context that
it interrupted), these implementations are disregarded, and either the
generic C version or another table based version implemented in assembler
is selected instead.

Since falling back to synchronous AES is not only a performance issue, but
potentially a security issue as well (due to the fact that table based AES
is not time invariant), let's fix this, by allocating an ordinary skcipher
as the fallback, and invoke it with the completion routine that was given
to the outer request.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
 drivers/crypto/picoxcell_crypto.c | 34 +++++++++++---------
 1 file changed, 19 insertions(+), 15 deletions(-)

diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c
index 7384e91c8b32..eea75c7cbdf2 100644
--- a/drivers/crypto/picoxcell_crypto.c
+++ b/drivers/crypto/picoxcell_crypto.c
@@ -86,6 +86,7 @@ struct spacc_req {
 	dma_addr_t			src_addr, dst_addr;
 	struct spacc_ddt		*src_ddt, *dst_ddt;
 	void				(*complete)(struct spacc_req *req);
+	struct skcipher_request		fallback_req;	// keep at the end
 };
 
 struct spacc_aead {
@@ -158,7 +159,7 @@ struct spacc_ablk_ctx {
 	 * The fallback cipher. If the operation can't be done in hardware,
 	 * fallback to a software version.
 	 */
-	struct crypto_sync_skcipher	*sw_cipher;
+	struct crypto_skcipher		*sw_cipher;
 };
 
 /* AEAD cipher context. */
@@ -792,13 +793,13 @@ static int spacc_aes_setkey(struct crypto_skcipher *cipher, const u8 *key,
 		 * Set the fallback transform to use the same request flags as
 		 * the hardware transform.
 		 */
-		crypto_sync_skcipher_clear_flags(ctx->sw_cipher,
+		crypto_skcipher_clear_flags(ctx->sw_cipher,
 					    CRYPTO_TFM_REQ_MASK);
-		crypto_sync_skcipher_set_flags(ctx->sw_cipher,
+		crypto_skcipher_set_flags(ctx->sw_cipher,
 					  cipher->base.crt_flags &
 					  CRYPTO_TFM_REQ_MASK);
 
-		err = crypto_sync_skcipher_setkey(ctx->sw_cipher, key, len);
+		err = crypto_skcipher_setkey(ctx->sw_cipher, key, len);
 		if (err)
 			goto sw_setkey_failed;
 	}
@@ -900,7 +901,7 @@ static int spacc_ablk_do_fallback(struct skcipher_request *req,
 	struct crypto_tfm *old_tfm =
 	    crypto_skcipher_tfm(crypto_skcipher_reqtfm(req));
 	struct spacc_ablk_ctx *ctx = crypto_tfm_ctx(old_tfm);
-	SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->sw_cipher);
+	struct spacc_req *dev_req = skcipher_request_ctx(req);
 	int err;
 
 	/*
@@ -908,13 +909,13 @@ static int spacc_ablk_do_fallback(struct skcipher_request *req,
 	 * the ciphering has completed, put the old transform back into the
 	 * request.
 	 */
-	skcipher_request_set_sync_tfm(subreq, ctx->sw_cipher);
-	skcipher_request_set_callback(subreq, req->base.flags, NULL, NULL);
-	skcipher_request_set_crypt(subreq, req->src, req->dst,
+	skcipher_request_set_tfm(&dev_req->fallback_req, ctx->sw_cipher);
+	skcipher_request_set_callback(&dev_req->fallback_req, req->base.flags,
+				      req->base.complete, req->base.data);
+	skcipher_request_set_crypt(&dev_req->fallback_req, req->src, req->dst,
 				   req->cryptlen, req->iv);
-	err = is_encrypt ? crypto_skcipher_encrypt(subreq) :
-			   crypto_skcipher_decrypt(subreq);
-	skcipher_request_zero(subreq);
+	err = is_encrypt ? crypto_skcipher_encrypt(&dev_req->fallback_req) :
+			   crypto_skcipher_decrypt(&dev_req->fallback_req);
 
 	return err;
 }
@@ -1007,19 +1008,22 @@ static int spacc_ablk_init_tfm(struct crypto_skcipher *tfm)
 	ctx->generic.flags = spacc_alg->type;
 	ctx->generic.engine = engine;
 	if (alg->base.cra_flags & CRYPTO_ALG_NEED_FALLBACK) {
-		ctx->sw_cipher = crypto_alloc_sync_skcipher(
+		ctx->sw_cipher = crypto_alloc_skcipher(
 			alg->base.cra_name, 0, CRYPTO_ALG_NEED_FALLBACK);
 		if (IS_ERR(ctx->sw_cipher)) {
 			dev_warn(engine->dev, "failed to allocate fallback for %s\n",
 				 alg->base.cra_name);
 			return PTR_ERR(ctx->sw_cipher);
 		}
+		crypto_skcipher_set_reqsize(tfm, sizeof(struct spacc_req) +
+						 crypto_skcipher_reqsize(ctx->sw_cipher));
+	} else {
+		crypto_skcipher_set_reqsize(tfm, sizeof(struct spacc_req));
 	}
+
 	ctx->generic.key_offs = spacc_alg->key_offs;
 	ctx->generic.iv_offs = spacc_alg->iv_offs;
 
-	crypto_skcipher_set_reqsize(tfm, sizeof(struct spacc_req));
-
 	return 0;
 }
 
@@ -1027,7 +1031,7 @@ static void spacc_ablk_exit_tfm(struct crypto_skcipher *tfm)
 {
 	struct spacc_ablk_ctx *ctx = crypto_skcipher_ctx(tfm);
 
-	crypto_free_sync_skcipher(ctx->sw_cipher);
+	crypto_free_skcipher(ctx->sw_cipher);
 }
 
 static int spacc_ablk_encrypt(struct skcipher_request *req)
-- 
2.27.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2020-06-27  8:37 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-27  8:36 [PATCH v2 00/13] crypto: permit asynchronous skciphers as driver fallbacks Ard Biesheuvel
2020-06-27  8:36 ` Ard Biesheuvel
2020-06-27  8:36 ` Ard Biesheuvel
2020-06-27  8:36 ` [PATCH v2 01/13] crypto: amlogic-gxl - default to build as module Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36 ` [PATCH v2 02/13] crypto: amlogic-gxl - permit async skcipher as fallback Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36 ` [PATCH v2 03/13] crypto: omap-aes - permit asynchronous " Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36 ` [PATCH v2 04/13] crypto: sun4i " Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36 ` [PATCH v2 05/13] crypto: sun8i-ce " Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36 ` [PATCH v2 06/13] crypto: sun8i-ss " Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36 ` [PATCH v2 07/13] crypto: ccp " Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36 ` [PATCH v2 08/13] crypto: chelsio " Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36 ` [PATCH v2 09/13] crypto: mxs-dcp " Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36 ` Ard Biesheuvel [this message]
2020-06-27  8:36   ` [PATCH v2 10/13] crypto: picoxcell " Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36 ` [PATCH v2 11/13] crypto: qce " Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36 ` [PATCH v2 12/13] crypto: sahara " Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36 ` [PATCH v2 13/13] crypto: mediatek - use AES library for GCM key derivation Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel
2020-06-27  8:36   ` Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200627083623.2428333-11-ardb@kernel.org \
    --to=ardb@kernel.org \
    --cc=ayush.sawal@chelsio.com \
    --cc=clabbe.montjoie@gmail.com \
    --cc=davem@davemloft.net \
    --cc=ebiggers@google.com \
    --cc=festevam@gmail.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=jamie@jamieiles.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=matthias.bgg@gmail.com \
    --cc=mripard@kernel.org \
    --cc=rohitm@chelsio.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=t-kristo@ti.com \
    --cc=thomas.lendacky@amd.com \
    --cc=vinay.yadav@chelsio.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.