From: "Ondřej Jirman" <megous@megous.com>
To: Sam Ravnborg <sam@ravnborg.org>
Cc: linux-sunxi@googlegroups.com,
"Thierry Reding" <thierry.reding@gmail.com>,
"David Airlie" <airlied@linux.ie>,
"Daniel Vetter" <daniel@ffwll.ch>,
"Guido Günther" <agx@sigxcpu.org>,
"Purism Kernel Team" <kernel@puri.sm>,
"Rob Herring" <robh+dt@kernel.org>,
"Maxime Ripard" <mripard@kernel.org>,
"Chen-Yu Tsai" <wens@csie.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Icenowy Zheng" <icenowy@aosc.io>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
"Samuel Holland" <samuel@sholland.org>,
"Martijn Braam" <martijn@brixit.nl>,
"Luca Weiss" <luca@z3ntu.xyz>, "Bhushan Shah" <bshah@kde.org>
Subject: Re: [PATCH v6 00/13] Add support for PinePhone LCD panel
Date: Wed, 1 Jul 2020 18:30:18 +0200 [thread overview]
Message-ID: <20200701163018.cfweuzp76qx5nsew@core.my.home> (raw)
In-Reply-To: <20200701152532.GA670324@ravnborg.org>
Hello Sam,
On Wed, Jul 01, 2020 at 05:25:32PM +0200, Sam Ravnborg wrote:
> Hi Ondrej.
>
> On Wed, Jul 01, 2020 at 12:31:13PM +0200, Ondrej Jirman wrote:
> > This patchset adds support for the LCD panel of PinePhone.
> >
> > I've tested this on PinePhone 1.0 and 1.2.
> >
> > Please take a look.
> >
> > thank you and regards,
> > Ondrej Jirman
> >
> > Changes in v6:
> > - Fixed spacing in yaml
> > - Fixed wrong vccio->iovcc supply name in the bindings doc
> > - I noticed that the original driver uses a delay of 20ms in the init
> > function to achieve a combined total of 120ms required from post-reset
> > to display_on. I've added a similar delay to xbd599_init, so that
> > xbd599 panel also has the right timing. (patch 9)
> > - v5->v6 diff: https://megous.com/dl/tmp/v5-v6.patch
> > - Added review/ack tags
> > - Learned to run dt_binding_check by myself ;)
> The patch-set does not apply clean on top of drm-misc-next - due to
> vrefresh removal.
> Please re-spin.
Sorry for that. Rebased and retested.
thank you,
o.
> Sam
WARNING: multiple messages have this Message-ID (diff)
From: "Ondřej Jirman" <megous@megous.com>
To: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
"Purism Kernel Team" <kernel@puri.sm>,
"Samuel Holland" <samuel@sholland.org>,
"David Airlie" <airlied@linux.ie>,
"Guido Günther" <agx@sigxcpu.org>, "Bhushan Shah" <bshah@kde.org>,
"Chen-Yu Tsai" <wens@csie.org>,
"Rob Herring" <robh+dt@kernel.org>,
linux-kernel@vger.kernel.org, "Martijn Braam" <martijn@brixit.nl>,
linux-sunxi@googlegroups.com,
"Thierry Reding" <thierry.reding@gmail.com>,
"Luca Weiss" <luca@z3ntu.xyz>,
"Maxime Ripard" <mripard@kernel.org>,
"Daniel Vetter" <daniel@ffwll.ch>,
"Linus Walleij" <linus.walleij@linaro.org>,
linux-arm-kernel@lists.infradead.org,
"Icenowy Zheng" <icenowy@aosc.io>
Subject: Re: [PATCH v6 00/13] Add support for PinePhone LCD panel
Date: Wed, 1 Jul 2020 18:30:18 +0200 [thread overview]
Message-ID: <20200701163018.cfweuzp76qx5nsew@core.my.home> (raw)
In-Reply-To: <20200701152532.GA670324@ravnborg.org>
Hello Sam,
On Wed, Jul 01, 2020 at 05:25:32PM +0200, Sam Ravnborg wrote:
> Hi Ondrej.
>
> On Wed, Jul 01, 2020 at 12:31:13PM +0200, Ondrej Jirman wrote:
> > This patchset adds support for the LCD panel of PinePhone.
> >
> > I've tested this on PinePhone 1.0 and 1.2.
> >
> > Please take a look.
> >
> > thank you and regards,
> > Ondrej Jirman
> >
> > Changes in v6:
> > - Fixed spacing in yaml
> > - Fixed wrong vccio->iovcc supply name in the bindings doc
> > - I noticed that the original driver uses a delay of 20ms in the init
> > function to achieve a combined total of 120ms required from post-reset
> > to display_on. I've added a similar delay to xbd599_init, so that
> > xbd599 panel also has the right timing. (patch 9)
> > - v5->v6 diff: https://megous.com/dl/tmp/v5-v6.patch
> > - Added review/ack tags
> > - Learned to run dt_binding_check by myself ;)
> The patch-set does not apply clean on top of drm-misc-next - due to
> vrefresh removal.
> Please re-spin.
Sorry for that. Rebased and retested.
thank you,
o.
> Sam
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: "Ondřej Jirman" <megous@megous.com>
To: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
"Purism Kernel Team" <kernel@puri.sm>,
"Samuel Holland" <samuel@sholland.org>,
"David Airlie" <airlied@linux.ie>,
"Guido Günther" <agx@sigxcpu.org>, "Bhushan Shah" <bshah@kde.org>,
"Chen-Yu Tsai" <wens@csie.org>,
"Rob Herring" <robh+dt@kernel.org>,
linux-kernel@vger.kernel.org, "Martijn Braam" <martijn@brixit.nl>,
linux-sunxi@googlegroups.com,
"Thierry Reding" <thierry.reding@gmail.com>,
"Luca Weiss" <luca@z3ntu.xyz>,
linux-arm-kernel@lists.infradead.org,
"Icenowy Zheng" <icenowy@aosc.io>
Subject: Re: [PATCH v6 00/13] Add support for PinePhone LCD panel
Date: Wed, 1 Jul 2020 18:30:18 +0200 [thread overview]
Message-ID: <20200701163018.cfweuzp76qx5nsew@core.my.home> (raw)
In-Reply-To: <20200701152532.GA670324@ravnborg.org>
Hello Sam,
On Wed, Jul 01, 2020 at 05:25:32PM +0200, Sam Ravnborg wrote:
> Hi Ondrej.
>
> On Wed, Jul 01, 2020 at 12:31:13PM +0200, Ondrej Jirman wrote:
> > This patchset adds support for the LCD panel of PinePhone.
> >
> > I've tested this on PinePhone 1.0 and 1.2.
> >
> > Please take a look.
> >
> > thank you and regards,
> > Ondrej Jirman
> >
> > Changes in v6:
> > - Fixed spacing in yaml
> > - Fixed wrong vccio->iovcc supply name in the bindings doc
> > - I noticed that the original driver uses a delay of 20ms in the init
> > function to achieve a combined total of 120ms required from post-reset
> > to display_on. I've added a similar delay to xbd599_init, so that
> > xbd599 panel also has the right timing. (patch 9)
> > - v5->v6 diff: https://megous.com/dl/tmp/v5-v6.patch
> > - Added review/ack tags
> > - Learned to run dt_binding_check by myself ;)
> The patch-set does not apply clean on top of drm-misc-next - due to
> vrefresh removal.
> Please re-spin.
Sorry for that. Rebased and retested.
thank you,
o.
> Sam
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-07-01 16:30 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-01 10:31 [PATCH v6 00/13] Add support for PinePhone LCD panel Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` [PATCH v6 01/13] dt-bindings: vendor-prefixes: Add Xingbangda Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` [PATCH v6 02/13] dt-bindings: panel: Convert rocktech,jh057n00900 to yaml Ondrej Jirman
2020-07-01 10:31 ` [PATCH v6 02/13] dt-bindings: panel: Convert rocktech, jh057n00900 " Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 15:58 ` [PATCH v6 02/13] dt-bindings: panel: Convert rocktech,jh057n00900 " Guido Günther
2020-07-01 15:58 ` Guido Günther
2020-07-01 15:58 ` Guido Günther
2020-07-01 16:07 ` Sam Ravnborg
2020-07-01 16:07 ` Sam Ravnborg
2020-07-01 16:07 ` Sam Ravnborg
2020-07-01 16:32 ` Ondřej Jirman
2020-07-01 16:32 ` Ondřej Jirman
2020-07-01 16:32 ` Ondřej Jirman
2020-07-01 10:31 ` [PATCH v6 03/13] dt-bindings: panel: Add compatible for Xingbangda XBD599 panel Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` [PATCH v6 04/13] drm/panel: rocktech-jh057n00900: Rename the driver to st7703 Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 16:00 ` Guido Günther
2020-07-01 16:00 ` Guido Günther
2020-07-01 16:00 ` Guido Günther
2020-07-01 10:31 ` [PATCH v6 05/13] drm/panel: st7703: Rename functions from jh057n prefix " Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 16:01 ` Guido Günther
2020-07-01 16:01 ` Guido Günther
2020-07-01 16:01 ` Guido Günther
2020-07-01 10:31 ` [PATCH v6 06/13] drm/panel: st7703: Prepare for supporting multiple panels Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 16:02 ` Guido Günther
2020-07-01 16:02 ` Guido Günther
2020-07-01 16:02 ` Guido Günther
2020-07-01 10:31 ` [PATCH v6 07/13] drm/panel: st7703: Move code specific to jh057n closer together Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 16:02 ` Guido Günther
2020-07-01 16:02 ` Guido Günther
2020-07-01 16:02 ` Guido Günther
2020-07-01 10:31 ` [PATCH v6 08/13] drm/panel: st7703: Move generic part of init sequence to enable callback Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 16:02 ` Guido Günther
2020-07-01 16:02 ` Guido Günther
2020-07-01 16:02 ` Guido Günther
2020-07-01 10:31 ` [PATCH v6 09/13] drm/panel: st7703: Add support for Xingbangda XBD599 Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 16:03 ` Guido Günther
2020-07-01 16:03 ` Guido Günther
2020-07-01 16:03 ` Guido Günther
2020-07-01 10:31 ` [PATCH v6 10/13] drm/panel: st7703: Enter sleep after display off Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 16:04 ` Guido Günther
2020-07-01 16:04 ` Guido Günther
2020-07-01 16:04 ` Guido Günther
2020-07-01 10:31 ` [PATCH v6 11/13] drm/panel: st7703: Assert reset prior to powering down the regulators Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 16:04 ` Guido Günther
2020-07-01 16:04 ` Guido Günther
2020-07-01 16:04 ` Guido Günther
2020-07-01 10:31 ` [PATCH v6 12/13] arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` [PATCH v6 13/13] arm64: dts: sun50i-a64-pinephone: Add touchscreen support Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 10:31 ` Ondrej Jirman
2020-07-01 12:01 ` Icenowy Zheng
2020-07-01 12:01 ` Icenowy Zheng
2020-07-01 12:01 ` Icenowy Zheng
2020-07-01 18:57 ` Ondřej Jirman
2020-07-01 18:57 ` Ondřej Jirman
2020-07-01 18:57 ` Ondřej Jirman
2020-07-01 15:25 ` [PATCH v6 00/13] Add support for PinePhone LCD panel Sam Ravnborg
2020-07-01 15:25 ` Sam Ravnborg
2020-07-01 15:25 ` Sam Ravnborg
2020-07-01 16:30 ` Ondřej Jirman [this message]
2020-07-01 16:30 ` Ondřej Jirman
2020-07-01 16:30 ` Ondřej Jirman
2020-07-01 16:37 ` Linus Walleij
2020-07-01 16:37 ` Linus Walleij
2020-07-01 16:37 ` Linus Walleij
2020-07-01 15:54 ` Guido Günther
2020-07-01 15:54 ` Guido Günther
2020-07-01 15:54 ` Guido Günther
2020-07-01 16:42 ` Ondřej Jirman
2020-07-01 16:42 ` Ondřej Jirman
2020-07-01 16:42 ` Ondřej Jirman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200701163018.cfweuzp76qx5nsew@core.my.home \
--to=megous@megous.com \
--cc=agx@sigxcpu.org \
--cc=airlied@linux.ie \
--cc=bshah@kde.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=icenowy@aosc.io \
--cc=kernel@puri.sm \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=luca@z3ntu.xyz \
--cc=martijn@brixit.nl \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=samuel@sholland.org \
--cc=thierry.reding@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.