From: Tony Lindgren <tony@atomide.com> To: linux-omap@vger.kernel.org Cc: "Andrew F . Davis" <afd@ti.com>, Santosh Shilimkar <ssantosh@kernel.org>, Suman Anna <s-anna@ti.com>, Tero Kristo <t-kristo@ti.com>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Rob Herring <robh@kernel.org>, devicetree@vger.kernel.org Subject: [PATCHv4 0/6] Add initial genpd support for omap PRM driver Date: Thu, 2 Jul 2020 08:45:07 -0700 [thread overview] Message-ID: <20200702154513.31859-1-tony@atomide.com> (raw) Hi all, Here's v4 set of patches to add genpd support to the PRM (Power and Reset Module) driver. Initially we just add one hardware accelerator power domain for sgx, and one interconnect instance for l4_abe. The rest of the SoC specific domain data is probably best added one SoC at a time based on generated data. Regards, Tony Changes since v3: - Drop the unnecessary __maybe_unused as that's no longer needed Changes since v2: - Update binding to clarify a single power domain provider - Unwrap generic domain configrations for __maybe_unused Changes since v1: - Dropped clocks from the binding and prm driver as there's no need for them as pointed out by Tero - Add checking for domain transition bit in pwrstst register as pointed out by Tero - Add omap_prm_domain_show_state() for CONFIG_DEBUG Tony Lindgren (6): dt-bindings: omap: Update PRM binding for genpd soc: ti: omap-prm: Add basic power domain support soc: ti: omap-prm: Configure sgx power domain for am3 and am4 soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data ARM: dts: Configure omap4 and 5 l4_abe for genpd and drop platform data .../devicetree/bindings/arm/omap/prm-inst.txt | 2 + arch/arm/boot/dts/am33xx.dtsi | 2 + arch/arm/boot/dts/am4372.dtsi | 2 + arch/arm/boot/dts/omap4-l4-abe.dtsi | 6 +- arch/arm/boot/dts/omap4.dtsi | 6 + arch/arm/boot/dts/omap5-l4-abe.dtsi | 6 +- arch/arm/boot/dts/omap5.dtsi | 6 + arch/arm/mach-omap2/Kconfig | 1 + .../omap_hwmod_33xx_43xx_interconnect_data.c | 16 - .../omap_hwmod_33xx_43xx_ipblock_data.c | 40 --- arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 2 - arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 2 - arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 33 --- arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 31 -- drivers/soc/ti/omap_prm.c | 274 +++++++++++++++++- 15 files changed, 298 insertions(+), 131 deletions(-) -- 2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Tony Lindgren <tony@atomide.com> To: linux-omap@vger.kernel.org Cc: Rob Herring <robh@kernel.org>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, "Andrew F . Davis" <afd@ti.com>, Tero Kristo <t-kristo@ti.com>, Santosh Shilimkar <ssantosh@kernel.org>, linux-arm-kernel@lists.infradead.org Subject: [PATCHv4 0/6] Add initial genpd support for omap PRM driver Date: Thu, 2 Jul 2020 08:45:07 -0700 [thread overview] Message-ID: <20200702154513.31859-1-tony@atomide.com> (raw) Hi all, Here's v4 set of patches to add genpd support to the PRM (Power and Reset Module) driver. Initially we just add one hardware accelerator power domain for sgx, and one interconnect instance for l4_abe. The rest of the SoC specific domain data is probably best added one SoC at a time based on generated data. Regards, Tony Changes since v3: - Drop the unnecessary __maybe_unused as that's no longer needed Changes since v2: - Update binding to clarify a single power domain provider - Unwrap generic domain configrations for __maybe_unused Changes since v1: - Dropped clocks from the binding and prm driver as there's no need for them as pointed out by Tero - Add checking for domain transition bit in pwrstst register as pointed out by Tero - Add omap_prm_domain_show_state() for CONFIG_DEBUG Tony Lindgren (6): dt-bindings: omap: Update PRM binding for genpd soc: ti: omap-prm: Add basic power domain support soc: ti: omap-prm: Configure sgx power domain for am3 and am4 soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data ARM: dts: Configure omap4 and 5 l4_abe for genpd and drop platform data .../devicetree/bindings/arm/omap/prm-inst.txt | 2 + arch/arm/boot/dts/am33xx.dtsi | 2 + arch/arm/boot/dts/am4372.dtsi | 2 + arch/arm/boot/dts/omap4-l4-abe.dtsi | 6 +- arch/arm/boot/dts/omap4.dtsi | 6 + arch/arm/boot/dts/omap5-l4-abe.dtsi | 6 +- arch/arm/boot/dts/omap5.dtsi | 6 + arch/arm/mach-omap2/Kconfig | 1 + .../omap_hwmod_33xx_43xx_interconnect_data.c | 16 - .../omap_hwmod_33xx_43xx_ipblock_data.c | 40 --- arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 2 - arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 2 - arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 33 --- arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 31 -- drivers/soc/ti/omap_prm.c | 274 +++++++++++++++++- 15 files changed, 298 insertions(+), 131 deletions(-) -- 2.27.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-07-02 15:45 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-02 15:45 Tony Lindgren [this message] 2020-07-02 15:45 ` [PATCHv4 0/6] Add initial genpd support for omap PRM driver Tony Lindgren 2020-07-02 15:45 ` [PATCH 1/6] dt-bindings: omap: Update PRM binding for genpd Tony Lindgren 2020-07-02 15:45 ` Tony Lindgren 2020-07-15 20:58 ` Rob Herring 2020-07-15 20:58 ` Rob Herring 2020-07-02 15:45 ` [PATCH 2/6] soc: ti: omap-prm: Add basic power domain support Tony Lindgren 2020-07-02 15:45 ` Tony Lindgren 2020-07-02 15:45 ` [PATCH 3/6] soc: ti: omap-prm: Configure sgx power domain for am3 and am4 Tony Lindgren 2020-07-02 15:45 ` Tony Lindgren 2020-07-02 15:45 ` [PATCH 4/6] soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain Tony Lindgren 2020-07-02 15:45 ` Tony Lindgren 2020-07-02 15:45 ` [PATCH 5/6] ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data Tony Lindgren 2020-07-02 15:45 ` Tony Lindgren 2020-07-02 15:45 ` [PATCH 6/6] ARM: dts: Configure omap4 and 5 l4_abe " Tony Lindgren 2020-07-02 15:45 ` Tony Lindgren 2020-08-17 6:53 ` [PATCHv4 0/6] Add initial genpd support for omap PRM driver Tony Lindgren 2020-08-17 6:53 ` Tony Lindgren 2020-08-17 15:25 ` santosh.shilimkar 2020-08-17 15:25 ` santosh.shilimkar 2020-08-18 8:26 ` Tony Lindgren 2020-08-18 8:26 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200702154513.31859-1-tony@atomide.com \ --to=tony@atomide.com \ --cc=afd@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=robh@kernel.org \ --cc=s-anna@ti.com \ --cc=ssantosh@kernel.org \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.