All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefano Stabellini <sstabellini@kernel.org>
To: jgross@suse.com, boris.ostrovsky@oracle.com, konrad.wilk@oracle.com
Cc: sstabellini@kernel.org, xen-devel@lists.xenproject.org,
	linux-kernel@vger.kernel.org, hch@infradead.org,
	Stefano Stabellini <stefano.stabellini@xilinx.com>
Subject: [PATCH v3 02/11] swiotlb-xen: remove start_dma_addr
Date: Fri, 10 Jul 2020 15:34:18 -0700	[thread overview]
Message-ID: <20200710223427.6897-2-sstabellini@kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.21.2007101521290.4124@sstabellini-ThinkPad-T480s>

From: Stefano Stabellini <stefano.stabellini@xilinx.com>

It is not strictly needed. Call virt_to_phys on xen_io_tlb_start
instead. It will be useful not to have a start_dma_addr around with the
next patches.

Note that virt_to_phys is not the same as xen_virt_to_bus but actually
it is used to compared again __pa(xen_io_tlb_start) as passed to
swiotlb_init_with_tbl, so virt_to_phys is actually what we want.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
---
Changes in v2:
- update commit message
---
 drivers/xen/swiotlb-xen.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 5fbadd07819b..89a775948a02 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -52,8 +52,6 @@ static unsigned long xen_io_tlb_nslabs;
  * Quick lookup value of the bus address of the IOTLB.
  */
 
-static u64 start_dma_addr;
-
 /*
  * Both of these functions should avoid XEN_PFN_PHYS because phys_addr_t
  * can be 32bit when dma_addr_t is 64bit leading to a loss in
@@ -241,7 +239,6 @@ int __ref xen_swiotlb_init(int verbose, bool early)
 		m_ret = XEN_SWIOTLB_EFIXUP;
 		goto error;
 	}
-	start_dma_addr = xen_virt_to_bus(xen_io_tlb_start);
 	if (early) {
 		if (swiotlb_init_with_tbl(xen_io_tlb_start, xen_io_tlb_nslabs,
 			 verbose))
@@ -392,8 +389,8 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 	 */
 	trace_swiotlb_bounced(dev, dev_addr, size, swiotlb_force);
 
-	map = swiotlb_tbl_map_single(dev, start_dma_addr, phys,
-				     size, size, dir, attrs);
+	map = swiotlb_tbl_map_single(dev, virt_to_phys(xen_io_tlb_start),
+				     phys, size, size, dir, attrs);
 	if (map == (phys_addr_t)DMA_MAPPING_ERROR)
 		return DMA_MAPPING_ERROR;
 
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Stefano Stabellini <sstabellini@kernel.org>
To: jgross@suse.com, boris.ostrovsky@oracle.com, konrad.wilk@oracle.com
Cc: hch@infradead.org, xen-devel@lists.xenproject.org,
	sstabellini@kernel.org, linux-kernel@vger.kernel.org,
	Stefano Stabellini <stefano.stabellini@xilinx.com>
Subject: [PATCH v3 02/11] swiotlb-xen: remove start_dma_addr
Date: Fri, 10 Jul 2020 15:34:18 -0700	[thread overview]
Message-ID: <20200710223427.6897-2-sstabellini@kernel.org> (raw)
In-Reply-To: <alpine.DEB.2.21.2007101521290.4124@sstabellini-ThinkPad-T480s>

From: Stefano Stabellini <stefano.stabellini@xilinx.com>

It is not strictly needed. Call virt_to_phys on xen_io_tlb_start
instead. It will be useful not to have a start_dma_addr around with the
next patches.

Note that virt_to_phys is not the same as xen_virt_to_bus but actually
it is used to compared again __pa(xen_io_tlb_start) as passed to
swiotlb_init_with_tbl, so virt_to_phys is actually what we want.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Roman Shaposhnik <roman@zededa.com>
---
Changes in v2:
- update commit message
---
 drivers/xen/swiotlb-xen.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 5fbadd07819b..89a775948a02 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -52,8 +52,6 @@ static unsigned long xen_io_tlb_nslabs;
  * Quick lookup value of the bus address of the IOTLB.
  */
 
-static u64 start_dma_addr;
-
 /*
  * Both of these functions should avoid XEN_PFN_PHYS because phys_addr_t
  * can be 32bit when dma_addr_t is 64bit leading to a loss in
@@ -241,7 +239,6 @@ int __ref xen_swiotlb_init(int verbose, bool early)
 		m_ret = XEN_SWIOTLB_EFIXUP;
 		goto error;
 	}
-	start_dma_addr = xen_virt_to_bus(xen_io_tlb_start);
 	if (early) {
 		if (swiotlb_init_with_tbl(xen_io_tlb_start, xen_io_tlb_nslabs,
 			 verbose))
@@ -392,8 +389,8 @@ static dma_addr_t xen_swiotlb_map_page(struct device *dev, struct page *page,
 	 */
 	trace_swiotlb_bounced(dev, dev_addr, size, swiotlb_force);
 
-	map = swiotlb_tbl_map_single(dev, start_dma_addr, phys,
-				     size, size, dir, attrs);
+	map = swiotlb_tbl_map_single(dev, virt_to_phys(xen_io_tlb_start),
+				     phys, size, size, dir, attrs);
 	if (map == (phys_addr_t)DMA_MAPPING_ERROR)
 		return DMA_MAPPING_ERROR;
 
-- 
2.17.1



  parent reply	other threads:[~2020-07-10 22:34 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-10 22:34 [PATCH v3 00/11] fix swiotlb-xen for RPi4 Stefano Stabellini
2020-07-10 22:34 ` Stefano Stabellini
2020-07-10 22:34 ` [PATCH v3 01/11] swiotlb-xen: use vmalloc_to_page on vmalloc virt addresses Stefano Stabellini
2020-07-10 22:34   ` Stefano Stabellini
2020-07-10 22:34 ` Stefano Stabellini [this message]
2020-07-10 22:34   ` [PATCH v3 02/11] swiotlb-xen: remove start_dma_addr Stefano Stabellini
2020-07-10 22:34 ` [PATCH v3 03/11] swiotlb-xen: add struct device * parameter to xen_phys_to_bus Stefano Stabellini
2020-07-10 22:34   ` Stefano Stabellini
2020-07-10 22:34 ` [PATCH v3 04/11] swiotlb-xen: add struct device * parameter to xen_bus_to_phys Stefano Stabellini
2020-07-10 22:34   ` Stefano Stabellini
2020-07-10 22:34 ` [PATCH v3 05/11] swiotlb-xen: add struct device * parameter to xen_dma_sync_for_cpu Stefano Stabellini
2020-07-10 22:34   ` Stefano Stabellini
2020-07-10 22:34 ` [PATCH v3 06/11] swiotlb-xen: add struct device * parameter to xen_dma_sync_for_device Stefano Stabellini
2020-07-10 22:34   ` Stefano Stabellini
2020-07-10 22:34 ` [PATCH v3 07/11] swiotlb-xen: add struct device * parameter to is_xen_swiotlb_buffer Stefano Stabellini
2020-07-10 22:34   ` Stefano Stabellini
2020-07-10 22:34 ` [PATCH v3 08/11] swiotlb-xen: remove XEN_PFN_PHYS Stefano Stabellini
2020-07-10 22:34   ` Stefano Stabellini
2020-08-04  5:33   ` Jürgen Groß
2020-08-04  5:33     ` Jürgen Groß
2020-07-10 22:34 ` [PATCH v3 09/11] swiotlb-xen: introduce phys_to_dma/dma_to_phys translations Stefano Stabellini
2020-07-10 22:34   ` Stefano Stabellini
2020-08-04  5:34   ` Jürgen Groß
2020-08-04  5:34     ` Jürgen Groß
2020-07-10 22:34 ` [PATCH v3 10/11] xen/arm: introduce phys/dma translations in xen_dma_sync_for_* Stefano Stabellini
2020-07-10 22:34   ` Stefano Stabellini
2020-08-04  5:35   ` Jürgen Groß
2020-08-04  5:35     ` Jürgen Groß
2020-07-10 22:34 ` [PATCH v3 11/11] xen/arm: call dma_to_phys on the dma_addr_t parameter of dma_cache_maint Stefano Stabellini
2020-07-10 22:34   ` Stefano Stabellini
2020-08-04  5:56 ` [PATCH v3 00/11] fix swiotlb-xen for RPi4 Jürgen Groß
2020-08-04  5:56   ` Jürgen Groß
2020-08-04 15:52   ` Stefano Stabellini
2020-08-04 15:52     ` Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200710223427.6897-2-sstabellini@kernel.org \
    --to=sstabellini@kernel.org \
    --cc=boris.ostrovsky@oracle.com \
    --cc=hch@infradead.org \
    --cc=jgross@suse.com \
    --cc=konrad.wilk@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stefano.stabellini@xilinx.com \
    --cc=xen-devel@lists.xenproject.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.