From: Dan Murphy <dmurphy@ti.com> To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>, <robh@kernel.org>, <marek.behun@nic.cz> Cc: devicetree@vger.kernel.org, linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, "Dan Murphy" <dmurphy@ti.com>, "Tony Lindgren" <tony@atomide.com>, "Benoît Cousson" <bcousson@baylibre.com> Subject: [PATCH v31 10/12] ARM: dts: n900: Add reg property to the LP5523 channel node Date: Thu, 16 Jul 2020 13:20:05 -0500 [thread overview] Message-ID: <20200716182007.18389-11-dmurphy@ti.com> (raw) In-Reply-To: <20200716182007.18389-1-dmurphy@ti.com> Add the reg property to each channel node. This update is to accommodate the multicolor framework. In addition to the accommodation this allows the LEDs to be placed on any channel and allow designs to skip channels as opposed to requiring sequential order. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> CC: Tony Lindgren <tony@atomide.com> CC: "Benoît Cousson" <bcousson@baylibre.com> Acked-by: Pavel Machek <pavel@ucw.cz> --- arch/arm/boot/dts/omap3-n900.dts | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4089d97405c9..ebe93b06b4f7 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -618,63 +618,74 @@ indicator { }; lp5523: lp5523@32 { + #address-cells = <1>; + #size-cells = <0>; compatible = "national,lp5523"; reg = <0x32>; clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */ - chan0 { + chan@0 { chan-name = "lp5523:kb1"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <0>; }; - chan1 { + chan@1 { chan-name = "lp5523:kb2"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <1>; }; - chan2 { + chan@2 { chan-name = "lp5523:kb3"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <2>; }; - chan3 { + chan@3 { chan-name = "lp5523:kb4"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <3>; }; - chan4 { + chan@4 { chan-name = "lp5523:b"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <4>; }; - chan5 { + chan@5 { chan-name = "lp5523:g"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <5>; }; - chan6 { + chan@6 { chan-name = "lp5523:r"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <6>; }; - chan7 { + chan@7 { chan-name = "lp5523:kb5"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <7>; }; - chan8 { + chan@8 { chan-name = "lp5523:kb6"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <8>; }; }; -- 2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com> To: <jacek.anaszewski@gmail.com>, <pavel@ucw.cz>, <robh@kernel.org>, <marek.behun@nic.cz> Cc: devicetree@vger.kernel.org, "Tony Lindgren" <tony@atomide.com>, linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org, "Benoît Cousson" <bcousson@baylibre.com>, linux-arm-kernel@lists.infradead.org, "Dan Murphy" <dmurphy@ti.com> Subject: [PATCH v31 10/12] ARM: dts: n900: Add reg property to the LP5523 channel node Date: Thu, 16 Jul 2020 13:20:05 -0500 [thread overview] Message-ID: <20200716182007.18389-11-dmurphy@ti.com> (raw) In-Reply-To: <20200716182007.18389-1-dmurphy@ti.com> Add the reg property to each channel node. This update is to accommodate the multicolor framework. In addition to the accommodation this allows the LEDs to be placed on any channel and allow designs to skip channels as opposed to requiring sequential order. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> CC: Tony Lindgren <tony@atomide.com> CC: "Benoît Cousson" <bcousson@baylibre.com> Acked-by: Pavel Machek <pavel@ucw.cz> --- arch/arm/boot/dts/omap3-n900.dts | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4089d97405c9..ebe93b06b4f7 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -618,63 +618,74 @@ indicator { }; lp5523: lp5523@32 { + #address-cells = <1>; + #size-cells = <0>; compatible = "national,lp5523"; reg = <0x32>; clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */ - chan0 { + chan@0 { chan-name = "lp5523:kb1"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <0>; }; - chan1 { + chan@1 { chan-name = "lp5523:kb2"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <1>; }; - chan2 { + chan@2 { chan-name = "lp5523:kb3"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <2>; }; - chan3 { + chan@3 { chan-name = "lp5523:kb4"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <3>; }; - chan4 { + chan@4 { chan-name = "lp5523:b"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <4>; }; - chan5 { + chan@5 { chan-name = "lp5523:g"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <5>; }; - chan6 { + chan@6 { chan-name = "lp5523:r"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <6>; }; - chan7 { + chan@7 { chan-name = "lp5523:kb5"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <7>; }; - chan8 { + chan@8 { chan-name = "lp5523:kb6"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <8>; }; }; -- 2.27.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-07-16 18:21 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-16 18:19 [PATCH v31 00/12] Multicolor Framework v31 Dan Murphy 2020-07-16 18:19 ` Dan Murphy 2020-07-16 18:19 ` [PATCH v31 01/12] leds: multicolor: Introduce a multicolor class definition Dan Murphy 2020-07-16 18:19 ` Dan Murphy 2020-07-20 9:54 ` Pavel Machek 2020-07-20 9:54 ` Pavel Machek 2020-07-20 12:07 ` Dan Murphy 2020-07-20 12:07 ` Dan Murphy 2020-07-16 18:19 ` [PATCH v31 02/12] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy 2020-07-16 18:19 ` Dan Murphy 2020-07-16 18:19 ` [PATCH v31 03/12] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy 2020-07-16 18:19 ` Dan Murphy 2020-07-21 21:05 ` Pavel Machek 2020-07-21 21:05 ` Pavel Machek 2020-07-22 0:04 ` Dan Murphy 2020-07-22 0:04 ` Dan Murphy 2020-07-22 7:10 ` Pavel Machek 2020-07-22 7:10 ` Pavel Machek 2020-07-22 12:26 ` Dan Murphy 2020-07-22 12:26 ` Dan Murphy 2020-07-22 12:39 ` Pavel Machek 2020-07-22 12:39 ` Pavel Machek 2020-07-21 21:07 ` Pavel Machek 2020-07-21 21:07 ` Pavel Machek 2020-07-22 0:05 ` Dan Murphy 2020-07-22 0:05 ` Dan Murphy 2020-07-16 18:19 ` [PATCH v31 04/12] dt-bindings: leds: Convert leds-lp55xx to yaml Dan Murphy 2020-07-16 18:19 ` Dan Murphy 2020-07-16 18:20 ` [PATCH v31 05/12] leds: lp55xx: Convert LED class registration to devm_* Dan Murphy 2020-07-16 18:20 ` Dan Murphy 2020-07-16 18:20 ` [PATCH v31 06/12] leds: lp55xx: Add multicolor framework support to lp55xx Dan Murphy 2020-07-16 18:20 ` Dan Murphy 2020-07-21 21:11 ` Pavel Machek 2020-07-21 21:11 ` Pavel Machek 2020-07-22 16:40 ` Dan Murphy 2020-07-22 16:40 ` Dan Murphy 2020-07-16 18:20 ` [PATCH v31 07/12] ARM: defconfig: u8500: Add LP55XX_COMMON config flag Dan Murphy 2020-07-16 18:20 ` Dan Murphy 2020-07-16 18:20 ` [PATCH v31 08/12] leds: lp5523: Update the lp5523 code to add multicolor brightness function Dan Murphy 2020-07-16 18:20 ` Dan Murphy 2020-07-16 18:20 ` [PATCH v31 09/12] leds: lp5521: Add multicolor framework multicolor brightness support Dan Murphy 2020-07-16 18:20 ` Dan Murphy 2020-07-16 18:20 ` Dan Murphy [this message] 2020-07-16 18:20 ` [PATCH v31 10/12] ARM: dts: n900: Add reg property to the LP5523 channel node Dan Murphy 2020-07-16 18:20 ` [PATCH v31 11/12] ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 " Dan Murphy 2020-07-16 18:20 ` Dan Murphy 2020-07-16 18:20 ` [PATCH v31 12/12] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes Dan Murphy 2020-07-16 18:20 ` Dan Murphy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200716182007.18389-11-dmurphy@ti.com \ --to=dmurphy@ti.com \ --cc=bcousson@baylibre.com \ --cc=devicetree@vger.kernel.org \ --cc=jacek.anaszewski@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-leds@vger.kernel.org \ --cc=marek.behun@nic.cz \ --cc=pavel@ucw.cz \ --cc=robh@kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.