From: Rob Herring <robh@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Jingoo Han <jingoohan1@gmail.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Binghui Wang <wangbinghui@hisilicon.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Fabio Estevam <festevam@gmail.com>,
Jesper Nilsson <jesper.nilsson@axis.com>,
Jonathan Chocron <jonnyc@amazon.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Kevin Hilman <khilman@baylibre.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Kukjin Kim <kgene@kernel.org>,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>,
linux-amlogic@lists.infradead.org, linux-arm-kernel@axis.com,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-omap@vger.kernel.org,
linux-pci@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
linux-tegra@vger.kernel.org, Lucas Stach <l.stach@pengutronix.de>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Murali Karicheri <m-karicheri2@ti.com>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Pratyush Anand <pratyush.anand@gmail.com>,
Richard Zhu <hongxing.zhu@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
Stanimir Varbanov <svarbanov@mm-sol.com>,
Thierry Reding <thierry.reding@gmail.com>,
Xiaowei Song <songxiaowei@hisilicon.com>,
Yue Wang <yue.wang@Amlogic.com>
Subject: [RFC 18/27] PCI: dwc: Remove storing of PCI resources
Date: Mon, 3 Aug 2020 15:01:07 -0600 [thread overview]
Message-ID: <20200803210116.3132633-19-robh@kernel.org> (raw)
In-Reply-To: <20200803210116.3132633-1-robh@kernel.org>
The PCI bridge resources are stored in pci_host_bridge.windows, so
there's no need to store them in a DWC specific struct. There's also no
need to parse the resources and store them a 2nd time as they are mainly
used for one time setup of iATU windows.
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jonathan Chocron <jonnyc@amazon.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
drivers/pci/controller/dwc/pci-keystone.c | 8 +++--
drivers/pci/controller/dwc/pcie-al.c | 7 +++--
.../pci/controller/dwc/pcie-designware-host.c | 29 ++++++-------------
drivers/pci/controller/dwc/pcie-designware.h | 6 ----
4 files changed, 19 insertions(+), 31 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 17271b21fb7d..bdf4fe1fc822 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -400,10 +400,14 @@ static void ks_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie)
u32 num_viewport = ks_pcie->num_viewport;
struct dw_pcie *pci = ks_pcie->pci;
struct pcie_port *pp = &pci->pp;
- u64 start = pp->mem->start;
- u64 end = pp->mem->end;
+ u64 start, end;
+ struct resource *mem;
int i;
+ mem = resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM)->res;
+ start = mem->start;
+ end = mem->end;
+
/* Disable BARs for inbound access */
ks_pcie_set_dbi_mode(ks_pcie);
dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0);
diff --git a/drivers/pci/controller/dwc/pcie-al.c b/drivers/pci/controller/dwc/pcie-al.c
index 5c5763f14485..72bf1777f264 100644
--- a/drivers/pci/controller/dwc/pcie-al.c
+++ b/drivers/pci/controller/dwc/pcie-al.c
@@ -265,6 +265,7 @@ static void al_pcie_config_prepare(struct al_pcie *pcie)
u8 secondary_bus;
u32 cfg_control;
u32 reg;
+ struct resource *bus = resource_list_first_type(&pp->bridge->windows, IORESOURCE_BUS)->res;
target_bus_cfg = &pcie->target_bus_cfg;
@@ -278,13 +279,13 @@ static void al_pcie_config_prepare(struct al_pcie *pcie)
target_bus_cfg->ecam_mask = ecam_bus_mask;
/* This portion is taken from the cfg_target_bus reg */
target_bus_cfg->reg_mask = ~target_bus_cfg->ecam_mask;
- target_bus_cfg->reg_val = pp->busn->start & target_bus_cfg->reg_mask;
+ target_bus_cfg->reg_val = bus->start & target_bus_cfg->reg_mask;
al_pcie_target_bus_set(pcie, target_bus_cfg->reg_val,
target_bus_cfg->reg_mask);
- secondary_bus = pp->busn->start + 1;
- subordinate_bus = pp->busn->end;
+ secondary_bus = bus->start + 1;
+ subordinate_bus = bus->end;
/* Set the valid values of secondary and subordinate buses */
cfg_control_offset = AXI_BASE_OFFSET + pcie->reg_offsets.ob_ctrl +
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 9528c8b1c9ab..a981e9de81d7 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -331,17 +331,9 @@ int dw_pcie_host_init(struct pcie_port *pp)
resource_list_for_each_entry(win, &bridge->windows) {
switch (resource_type(win->res)) {
case IORESOURCE_IO:
- pp->io = win->res;
- pp->io->name = "I/O";
- pp->io_size = resource_size(pp->io);
- pp->io_bus_addr = pp->io->start - win->offset;
- pp->io_base = pci_pio_to_address(pp->io->start);
- break;
- case IORESOURCE_MEM:
- pp->mem = win->res;
- pp->mem->name = "MEM";
- pp->mem_size = resource_size(pp->mem);
- pp->mem_bus_addr = pp->mem->start - win->offset;
+ pp->io_size = resource_size(win->res);
+ pp->io_bus_addr = win->res->start - win->offset;
+ pp->io_base = pci_pio_to_address(win->res->start);
break;
case 0:
pp->cfg = win->res;
@@ -350,9 +342,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
pp->cfg0_base = pp->cfg->start;
pp->cfg1_base = pp->cfg->start + pp->cfg0_size;
break;
- case IORESOURCE_BUS:
- pp->busn = win->res;
- break;
}
}
@@ -366,8 +355,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
}
}
- pp->mem_base = pp->mem->start;
-
if (!pp->va_cfg0_base) {
pp->va_cfg0_base = devm_pci_remap_cfgspace(dev,
pp->cfg0_base, pp->cfg0_size);
@@ -438,8 +425,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
goto err_free_msi;
}
- pp->root_bus_nr = pp->busn->start;
-
bridge->dev.parent = dev;
bridge->sysdata = pp;
bridge->busnr = pp->root_bus_nr;
@@ -623,9 +608,13 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
* ATU, so we should not program the ATU here.
*/
if (pp->bridge->child_ops == &dw_child_pcie_ops) {
+ struct resource_entry *entry =
+ resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM);
+
dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0,
- PCIE_ATU_TYPE_MEM, pp->mem_base,
- pp->mem_bus_addr, pp->mem_size);
+ PCIE_ATU_TYPE_MEM, entry->res->start,
+ entry->res->start - entry->offset,
+ resource_size(entry->res));
if (pci->num_viewport > 2)
dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX2,
PCIE_ATU_TYPE_IO, pp->io_base,
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 67aac6fdca24..3d552ec8a850 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -176,13 +176,7 @@ struct pcie_port {
resource_size_t io_base;
phys_addr_t io_bus_addr;
u32 io_size;
- u64 mem_base;
- phys_addr_t mem_bus_addr;
- u32 mem_size;
struct resource *cfg;
- struct resource *io;
- struct resource *mem;
- struct resource *busn;
int irq;
const struct dw_pcie_host_ops *ops;
int msi_irq;
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Jingoo Han <jingoohan1@gmail.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>,
linux-pci@vger.kernel.org,
Binghui Wang <wangbinghui@hisilicon.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Thierry Reding <thierry.reding@gmail.com>,
linux-arm-kernel@axis.com, Jonathan Chocron <jonnyc@amazon.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Fabio Estevam <festevam@gmail.com>,
Jesper Nilsson <jesper.nilsson@axis.com>,
linux-samsung-soc@vger.kernel.org,
Kevin Hilman <khilman@baylibre.com>,
Pratyush Anand <pratyush.anand@gmail.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Murali Karicheri <m-karicheri2@ti.com>,
NXP Linux Team <linux-imx@nxp.com>,
Xiaowei Song <songxiaowei@hisilicon.com>,
Richard Zhu <hongxing.zhu@nxp.com>,
linux-arm-msm@vger.kernel.org,
Sascha Hauer <s.hauer@pengutronix.de>,
Yue Wang <yue.wang@Amlogic.com>,
linux-tegra@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Stanimir Varbanov <svarbanov@mm-sol.com>,
Kukjin Kim <kgene@kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
Lucas Stach <l.stach@pengutronix.de>
Subject: [RFC 18/27] PCI: dwc: Remove storing of PCI resources
Date: Mon, 3 Aug 2020 15:01:07 -0600 [thread overview]
Message-ID: <20200803210116.3132633-19-robh@kernel.org> (raw)
In-Reply-To: <20200803210116.3132633-1-robh@kernel.org>
The PCI bridge resources are stored in pci_host_bridge.windows, so
there's no need to store them in a DWC specific struct. There's also no
need to parse the resources and store them a 2nd time as they are mainly
used for one time setup of iATU windows.
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jonathan Chocron <jonnyc@amazon.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
drivers/pci/controller/dwc/pci-keystone.c | 8 +++--
drivers/pci/controller/dwc/pcie-al.c | 7 +++--
.../pci/controller/dwc/pcie-designware-host.c | 29 ++++++-------------
drivers/pci/controller/dwc/pcie-designware.h | 6 ----
4 files changed, 19 insertions(+), 31 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 17271b21fb7d..bdf4fe1fc822 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -400,10 +400,14 @@ static void ks_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie)
u32 num_viewport = ks_pcie->num_viewport;
struct dw_pcie *pci = ks_pcie->pci;
struct pcie_port *pp = &pci->pp;
- u64 start = pp->mem->start;
- u64 end = pp->mem->end;
+ u64 start, end;
+ struct resource *mem;
int i;
+ mem = resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM)->res;
+ start = mem->start;
+ end = mem->end;
+
/* Disable BARs for inbound access */
ks_pcie_set_dbi_mode(ks_pcie);
dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0);
diff --git a/drivers/pci/controller/dwc/pcie-al.c b/drivers/pci/controller/dwc/pcie-al.c
index 5c5763f14485..72bf1777f264 100644
--- a/drivers/pci/controller/dwc/pcie-al.c
+++ b/drivers/pci/controller/dwc/pcie-al.c
@@ -265,6 +265,7 @@ static void al_pcie_config_prepare(struct al_pcie *pcie)
u8 secondary_bus;
u32 cfg_control;
u32 reg;
+ struct resource *bus = resource_list_first_type(&pp->bridge->windows, IORESOURCE_BUS)->res;
target_bus_cfg = &pcie->target_bus_cfg;
@@ -278,13 +279,13 @@ static void al_pcie_config_prepare(struct al_pcie *pcie)
target_bus_cfg->ecam_mask = ecam_bus_mask;
/* This portion is taken from the cfg_target_bus reg */
target_bus_cfg->reg_mask = ~target_bus_cfg->ecam_mask;
- target_bus_cfg->reg_val = pp->busn->start & target_bus_cfg->reg_mask;
+ target_bus_cfg->reg_val = bus->start & target_bus_cfg->reg_mask;
al_pcie_target_bus_set(pcie, target_bus_cfg->reg_val,
target_bus_cfg->reg_mask);
- secondary_bus = pp->busn->start + 1;
- subordinate_bus = pp->busn->end;
+ secondary_bus = bus->start + 1;
+ subordinate_bus = bus->end;
/* Set the valid values of secondary and subordinate buses */
cfg_control_offset = AXI_BASE_OFFSET + pcie->reg_offsets.ob_ctrl +
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 9528c8b1c9ab..a981e9de81d7 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -331,17 +331,9 @@ int dw_pcie_host_init(struct pcie_port *pp)
resource_list_for_each_entry(win, &bridge->windows) {
switch (resource_type(win->res)) {
case IORESOURCE_IO:
- pp->io = win->res;
- pp->io->name = "I/O";
- pp->io_size = resource_size(pp->io);
- pp->io_bus_addr = pp->io->start - win->offset;
- pp->io_base = pci_pio_to_address(pp->io->start);
- break;
- case IORESOURCE_MEM:
- pp->mem = win->res;
- pp->mem->name = "MEM";
- pp->mem_size = resource_size(pp->mem);
- pp->mem_bus_addr = pp->mem->start - win->offset;
+ pp->io_size = resource_size(win->res);
+ pp->io_bus_addr = win->res->start - win->offset;
+ pp->io_base = pci_pio_to_address(win->res->start);
break;
case 0:
pp->cfg = win->res;
@@ -350,9 +342,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
pp->cfg0_base = pp->cfg->start;
pp->cfg1_base = pp->cfg->start + pp->cfg0_size;
break;
- case IORESOURCE_BUS:
- pp->busn = win->res;
- break;
}
}
@@ -366,8 +355,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
}
}
- pp->mem_base = pp->mem->start;
-
if (!pp->va_cfg0_base) {
pp->va_cfg0_base = devm_pci_remap_cfgspace(dev,
pp->cfg0_base, pp->cfg0_size);
@@ -438,8 +425,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
goto err_free_msi;
}
- pp->root_bus_nr = pp->busn->start;
-
bridge->dev.parent = dev;
bridge->sysdata = pp;
bridge->busnr = pp->root_bus_nr;
@@ -623,9 +608,13 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
* ATU, so we should not program the ATU here.
*/
if (pp->bridge->child_ops == &dw_child_pcie_ops) {
+ struct resource_entry *entry =
+ resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM);
+
dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0,
- PCIE_ATU_TYPE_MEM, pp->mem_base,
- pp->mem_bus_addr, pp->mem_size);
+ PCIE_ATU_TYPE_MEM, entry->res->start,
+ entry->res->start - entry->offset,
+ resource_size(entry->res));
if (pci->num_viewport > 2)
dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX2,
PCIE_ATU_TYPE_IO, pp->io_base,
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 67aac6fdca24..3d552ec8a850 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -176,13 +176,7 @@ struct pcie_port {
resource_size_t io_base;
phys_addr_t io_bus_addr;
u32 io_size;
- u64 mem_base;
- phys_addr_t mem_bus_addr;
- u32 mem_size;
struct resource *cfg;
- struct resource *io;
- struct resource *mem;
- struct resource *busn;
int irq;
const struct dw_pcie_host_ops *ops;
int msi_irq;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Jingoo Han <jingoohan1@gmail.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>,
linux-pci@vger.kernel.org,
Binghui Wang <wangbinghui@hisilicon.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Thierry Reding <thierry.reding@gmail.com>,
linux-arm-kernel@axis.com, Jonathan Chocron <jonnyc@amazon.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Fabio Estevam <festevam@gmail.com>,
Jesper Nilsson <jesper.nilsson@axis.com>,
linux-samsung-soc@vger.kernel.org,
Kevin Hilman <khilman@baylibre.com>,
Pratyush Anand <pratyush.anand@gmail.com>,
Krzysztof Kozlowski <krzk@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Murali Karicheri <m-karicheri2@ti.com>,
NXP Linux Team <linux-imx@nxp.com>,
Xiaowei Song <songxiaowei@hisilicon.com>,
Richard Zhu <hongxing.zhu@nxp.com>,
linux-arm-msm@vger.kernel.org,
Sascha Hauer <s.hauer@pengutronix.de>,
Yue Wang <yue.wang@Amlogic.com>,
linux-tegra@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Stanimir Varbanov <svarbanov@mm-sol.com>,
Kukjin Kim <kgene@kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
Lucas Stach <l.stach@pengutronix.de>
Subject: [RFC 18/27] PCI: dwc: Remove storing of PCI resources
Date: Mon, 3 Aug 2020 15:01:07 -0600 [thread overview]
Message-ID: <20200803210116.3132633-19-robh@kernel.org> (raw)
In-Reply-To: <20200803210116.3132633-1-robh@kernel.org>
The PCI bridge resources are stored in pci_host_bridge.windows, so
there's no need to store them in a DWC specific struct. There's also no
need to parse the resources and store them a 2nd time as they are mainly
used for one time setup of iATU windows.
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jonathan Chocron <jonnyc@amazon.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
drivers/pci/controller/dwc/pci-keystone.c | 8 +++--
drivers/pci/controller/dwc/pcie-al.c | 7 +++--
.../pci/controller/dwc/pcie-designware-host.c | 29 ++++++-------------
drivers/pci/controller/dwc/pcie-designware.h | 6 ----
4 files changed, 19 insertions(+), 31 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 17271b21fb7d..bdf4fe1fc822 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -400,10 +400,14 @@ static void ks_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie)
u32 num_viewport = ks_pcie->num_viewport;
struct dw_pcie *pci = ks_pcie->pci;
struct pcie_port *pp = &pci->pp;
- u64 start = pp->mem->start;
- u64 end = pp->mem->end;
+ u64 start, end;
+ struct resource *mem;
int i;
+ mem = resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM)->res;
+ start = mem->start;
+ end = mem->end;
+
/* Disable BARs for inbound access */
ks_pcie_set_dbi_mode(ks_pcie);
dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, 0);
diff --git a/drivers/pci/controller/dwc/pcie-al.c b/drivers/pci/controller/dwc/pcie-al.c
index 5c5763f14485..72bf1777f264 100644
--- a/drivers/pci/controller/dwc/pcie-al.c
+++ b/drivers/pci/controller/dwc/pcie-al.c
@@ -265,6 +265,7 @@ static void al_pcie_config_prepare(struct al_pcie *pcie)
u8 secondary_bus;
u32 cfg_control;
u32 reg;
+ struct resource *bus = resource_list_first_type(&pp->bridge->windows, IORESOURCE_BUS)->res;
target_bus_cfg = &pcie->target_bus_cfg;
@@ -278,13 +279,13 @@ static void al_pcie_config_prepare(struct al_pcie *pcie)
target_bus_cfg->ecam_mask = ecam_bus_mask;
/* This portion is taken from the cfg_target_bus reg */
target_bus_cfg->reg_mask = ~target_bus_cfg->ecam_mask;
- target_bus_cfg->reg_val = pp->busn->start & target_bus_cfg->reg_mask;
+ target_bus_cfg->reg_val = bus->start & target_bus_cfg->reg_mask;
al_pcie_target_bus_set(pcie, target_bus_cfg->reg_val,
target_bus_cfg->reg_mask);
- secondary_bus = pp->busn->start + 1;
- subordinate_bus = pp->busn->end;
+ secondary_bus = bus->start + 1;
+ subordinate_bus = bus->end;
/* Set the valid values of secondary and subordinate buses */
cfg_control_offset = AXI_BASE_OFFSET + pcie->reg_offsets.ob_ctrl +
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 9528c8b1c9ab..a981e9de81d7 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -331,17 +331,9 @@ int dw_pcie_host_init(struct pcie_port *pp)
resource_list_for_each_entry(win, &bridge->windows) {
switch (resource_type(win->res)) {
case IORESOURCE_IO:
- pp->io = win->res;
- pp->io->name = "I/O";
- pp->io_size = resource_size(pp->io);
- pp->io_bus_addr = pp->io->start - win->offset;
- pp->io_base = pci_pio_to_address(pp->io->start);
- break;
- case IORESOURCE_MEM:
- pp->mem = win->res;
- pp->mem->name = "MEM";
- pp->mem_size = resource_size(pp->mem);
- pp->mem_bus_addr = pp->mem->start - win->offset;
+ pp->io_size = resource_size(win->res);
+ pp->io_bus_addr = win->res->start - win->offset;
+ pp->io_base = pci_pio_to_address(win->res->start);
break;
case 0:
pp->cfg = win->res;
@@ -350,9 +342,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
pp->cfg0_base = pp->cfg->start;
pp->cfg1_base = pp->cfg->start + pp->cfg0_size;
break;
- case IORESOURCE_BUS:
- pp->busn = win->res;
- break;
}
}
@@ -366,8 +355,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
}
}
- pp->mem_base = pp->mem->start;
-
if (!pp->va_cfg0_base) {
pp->va_cfg0_base = devm_pci_remap_cfgspace(dev,
pp->cfg0_base, pp->cfg0_size);
@@ -438,8 +425,6 @@ int dw_pcie_host_init(struct pcie_port *pp)
goto err_free_msi;
}
- pp->root_bus_nr = pp->busn->start;
-
bridge->dev.parent = dev;
bridge->sysdata = pp;
bridge->busnr = pp->root_bus_nr;
@@ -623,9 +608,13 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
* ATU, so we should not program the ATU here.
*/
if (pp->bridge->child_ops == &dw_child_pcie_ops) {
+ struct resource_entry *entry =
+ resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM);
+
dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX0,
- PCIE_ATU_TYPE_MEM, pp->mem_base,
- pp->mem_bus_addr, pp->mem_size);
+ PCIE_ATU_TYPE_MEM, entry->res->start,
+ entry->res->start - entry->offset,
+ resource_size(entry->res));
if (pci->num_viewport > 2)
dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX2,
PCIE_ATU_TYPE_IO, pp->io_base,
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 67aac6fdca24..3d552ec8a850 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -176,13 +176,7 @@ struct pcie_port {
resource_size_t io_base;
phys_addr_t io_bus_addr;
u32 io_size;
- u64 mem_base;
- phys_addr_t mem_bus_addr;
- u32 mem_size;
struct resource *cfg;
- struct resource *io;
- struct resource *mem;
- struct resource *busn;
int irq;
const struct dw_pcie_host_ops *ops;
int msi_irq;
--
2.25.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2020-08-03 21:02 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-03 21:00 [RFC 00/27] PCI: dwc: Driver clean-ups Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` [RFC 01/27] PCI: Allow root and child buses to have different pci_ops Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` [RFC 02/27] PCI: dwc: Use DBI accessors instead of own config accessors Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` [RFC 03/27] PCI: dwc: Allow overriding bridge pci_ops Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` [RFC 04/27] PCI: dwc: Add a default pci_ops.map_bus for root port Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` [RFC 05/27] PCI: dwc: al: Use pci_ops for child config space accessors Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` [RFC 06/27] PCI: dwc: keystone: Use pci_ops for " Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` [RFC 07/27] PCI: dwc: tegra: Use pci_ops for root " Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` [RFC 08/27] PCI: dwc: meson: " Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` [RFC 09/27] PCI: dwc: kirin: " Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` [RFC 10/27] PCI: dwc: exynos: " Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:00 ` Rob Herring
2020-08-03 21:01 ` [RFC 11/27] PCI: dwc: histb: " Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 12/27] PCI: dwc: Remove dwc specific config accessor ops Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 13/27] PCI: dwc: Use generic config accessors Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 14/27] PCI: Also call .add_bus() callback for root bus Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 15/27] PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 16/27] PCI: dwc: Convert to use pci_host_probe() Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 17/27] PCI: dwc: Remove root_bus pointer Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring [this message]
2020-08-03 21:01 ` [RFC 18/27] PCI: dwc: Remove storing of PCI resources Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 19/27] PCI: dwc: Simplify config space handling Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 20/27] PCI: dwc/keystone: Drop duplicated 'num-viewport' Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 21/27] PCI: dwc: Check CONFIG_PCI_MSI inside dw_pcie_msi_init() Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 22/27] PCI: dwc/imx6: Remove duplicate define PCIE_LINK_WIDTH_SPEED_CONTROL Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 23/27] PCI: dwc/meson: Drop unnecessary RC config space initialization Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 24/27] PCI: dwc/meson: Rework PCI config and DW port logic register accesses Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 25/27] PCI: dwc/qcom: Use common PCI register definitions Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 26/27] PCI: dwc: Remove hardcoded PCI_CAP_ID_EXP offset Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` [RFC 27/27] PCI: dwc/tegra: Use common Designware port logic register definitions Rob Herring
2020-08-03 21:01 ` Rob Herring
2020-08-03 21:01 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200803210116.3132633-19-robh@kernel.org \
--to=robh@kernel.org \
--cc=bhelgaas@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=festevam@gmail.com \
--cc=gustavo.pimentel@synopsys.com \
--cc=hayashi.kunihiko@socionext.com \
--cc=hongxing.zhu@nxp.com \
--cc=jesper.nilsson@axis.com \
--cc=jingoohan1@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=jonnyc@amazon.com \
--cc=kernel@pengutronix.de \
--cc=kgene@kernel.org \
--cc=khilman@baylibre.com \
--cc=kishon@ti.com \
--cc=krzk@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@axis.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=m-karicheri2@ti.com \
--cc=pratyush.anand@gmail.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=songxiaowei@hisilicon.com \
--cc=svarbanov@mm-sol.com \
--cc=thierry.reding@gmail.com \
--cc=wangbinghui@hisilicon.com \
--cc=yamada.masahiro@socionext.com \
--cc=yue.wang@Amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.