All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Peter Chen <Peter.Chen@nxp.com>,
	Cristian Birsan <cristian.birsan@microchip.com>,
	Felipe Balbi <balbi@kernel.org>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	Avi Fishman <avifishman70@gmail.com>,
	Tomer Maimon <tmaimon77@gmail.com>,
	Tali Perry <tali.perry1@gmail.com>,
	Patrick Venture <venture@google.com>,
	Nancy Yuen <yuenn@google.com>,
	Benjamin Fair <benjaminfair@google.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	Tony Prisk <linux@prisktech.co.nz>, Bin Liu <b-liu@ti.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, openbmc@lists.ozlabs.org,
	Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH 06/20] usb/chipidea: core: Use pm_ptr() macro
Date: Thu,  3 Sep 2020 13:25:40 +0200	[thread overview]
Message-ID: <20200903112554.34263-7-paul@crapouillou.net> (raw)
In-Reply-To: <20200903112554.34263-1-paul@crapouillou.net>

Use the newly introduced pm_ptr() macro, and mark the suspend/resume
functions __maybe_unused. These functions can then be moved outside the
CONFIG_PM_SUSPEND block, and the compiler can then process them and
detect build failures independently of the config. If unused, they will
simply be discarded by the compiler.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/usb/chipidea/core.c | 26 +++++++++++---------------
 1 file changed, 11 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index aa40e510b806..af64ab98fb56 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -1231,9 +1231,8 @@ static int ci_hdrc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
 /* Prepare wakeup by SRP before suspend */
-static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
+static void __maybe_unused ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
 {
 	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
 				!hw_read_otgsc(ci, OTGSC_ID)) {
@@ -1245,7 +1244,7 @@ static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
 }
 
 /* Handle SRP when wakeup by data pulse */
-static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
+static void __maybe_unused ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
 {
 	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
 		(ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) {
@@ -1259,7 +1258,7 @@ static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
 	}
 }
 
-static void ci_controller_suspend(struct ci_hdrc *ci)
+static void __maybe_unused ci_controller_suspend(struct ci_hdrc *ci)
 {
 	disable_irq(ci->irq);
 	ci_hdrc_enter_lpm(ci, true);
@@ -1277,7 +1276,7 @@ static void ci_controller_suspend(struct ci_hdrc *ci)
  * interrupt (wakeup int) only let the controller be out of
  * low power mode, but not handle any interrupts.
  */
-static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
+static void __maybe_unused ci_extcon_wakeup_int(struct ci_hdrc *ci)
 {
 	struct ci_hdrc_cable *cable_id, *cable_vbus;
 	u32 otgsc = hw_read_otgsc(ci, ~0);
@@ -1294,7 +1293,7 @@ static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
 		ci_irq(ci->irq, ci);
 }
 
-static int ci_controller_resume(struct device *dev)
+static int __maybe_unused ci_controller_resume(struct device *dev)
 {
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
 	int ret;
@@ -1332,8 +1331,7 @@ static int ci_controller_resume(struct device *dev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int ci_suspend(struct device *dev)
+static int __maybe_unused ci_suspend(struct device *dev)
 {
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
 
@@ -1366,7 +1364,7 @@ static int ci_suspend(struct device *dev)
 	return 0;
 }
 
-static int ci_resume(struct device *dev)
+static int __maybe_unused ci_resume(struct device *dev)
 {
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
 	int ret;
@@ -1386,9 +1384,8 @@ static int ci_resume(struct device *dev)
 
 	return ret;
 }
-#endif /* CONFIG_PM_SLEEP */
 
-static int ci_runtime_suspend(struct device *dev)
+static int __maybe_unused ci_runtime_suspend(struct device *dev)
 {
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
 
@@ -1408,13 +1405,12 @@ static int ci_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int ci_runtime_resume(struct device *dev)
+static int __maybe_unused ci_runtime_resume(struct device *dev)
 {
 	return ci_controller_resume(dev);
 }
 
-#endif /* CONFIG_PM */
-static const struct dev_pm_ops ci_pm_ops = {
+static const struct dev_pm_ops __maybe_unused ci_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
 	SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
 };
@@ -1424,7 +1420,7 @@ static struct platform_driver ci_hdrc_driver = {
 	.remove	= ci_hdrc_remove,
 	.driver	= {
 		.name	= "ci_hdrc",
-		.pm	= &ci_pm_ops,
+		.pm	= pm_ptr(&ci_pm_ops),
 		.dev_groups = ci_groups,
 	},
 };
-- 
2.28.0


WARNING: multiple messages have this Message-ID (diff)
From: Paul Cercueil <paul@crapouillou.net>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Peter Chen <Peter.Chen@nxp.com>,
	Cristian Birsan <cristian.birsan@microchip.com>,
	Felipe Balbi <balbi@kernel.org>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	Avi Fishman <avifishman70@gmail.com>,
	Tomer Maimon <tmaimon77@gmail.com>,
	Tali Perry <tali.perry1@gmail.com>,
	Patrick Venture <venture@google.com>,
	Nancy Yuen <yuenn@google.com>,
	Benjamin Fair <benjaminfair@google.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	Tony Prisk <linux@prisktech.co.nz>, Bin Liu <b-liu@ti.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>
Cc: Paul Cercueil <paul@crapouillou.net>,
	openbmc@lists.ozlabs.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/20] usb/chipidea: core: Use pm_ptr() macro
Date: Thu,  3 Sep 2020 13:25:40 +0200	[thread overview]
Message-ID: <20200903112554.34263-7-paul@crapouillou.net> (raw)
In-Reply-To: <20200903112554.34263-1-paul@crapouillou.net>

Use the newly introduced pm_ptr() macro, and mark the suspend/resume
functions __maybe_unused. These functions can then be moved outside the
CONFIG_PM_SUSPEND block, and the compiler can then process them and
detect build failures independently of the config. If unused, they will
simply be discarded by the compiler.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/usb/chipidea/core.c | 26 +++++++++++---------------
 1 file changed, 11 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index aa40e510b806..af64ab98fb56 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -1231,9 +1231,8 @@ static int ci_hdrc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
 /* Prepare wakeup by SRP before suspend */
-static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
+static void __maybe_unused ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
 {
 	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
 				!hw_read_otgsc(ci, OTGSC_ID)) {
@@ -1245,7 +1244,7 @@ static void ci_otg_fsm_suspend_for_srp(struct ci_hdrc *ci)
 }
 
 /* Handle SRP when wakeup by data pulse */
-static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
+static void __maybe_unused ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
 {
 	if ((ci->fsm.otg->state == OTG_STATE_A_IDLE) &&
 		(ci->fsm.a_bus_drop == 1) && (ci->fsm.a_bus_req == 0)) {
@@ -1259,7 +1258,7 @@ static void ci_otg_fsm_wakeup_by_srp(struct ci_hdrc *ci)
 	}
 }
 
-static void ci_controller_suspend(struct ci_hdrc *ci)
+static void __maybe_unused ci_controller_suspend(struct ci_hdrc *ci)
 {
 	disable_irq(ci->irq);
 	ci_hdrc_enter_lpm(ci, true);
@@ -1277,7 +1276,7 @@ static void ci_controller_suspend(struct ci_hdrc *ci)
  * interrupt (wakeup int) only let the controller be out of
  * low power mode, but not handle any interrupts.
  */
-static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
+static void __maybe_unused ci_extcon_wakeup_int(struct ci_hdrc *ci)
 {
 	struct ci_hdrc_cable *cable_id, *cable_vbus;
 	u32 otgsc = hw_read_otgsc(ci, ~0);
@@ -1294,7 +1293,7 @@ static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
 		ci_irq(ci->irq, ci);
 }
 
-static int ci_controller_resume(struct device *dev)
+static int __maybe_unused ci_controller_resume(struct device *dev)
 {
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
 	int ret;
@@ -1332,8 +1331,7 @@ static int ci_controller_resume(struct device *dev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int ci_suspend(struct device *dev)
+static int __maybe_unused ci_suspend(struct device *dev)
 {
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
 
@@ -1366,7 +1364,7 @@ static int ci_suspend(struct device *dev)
 	return 0;
 }
 
-static int ci_resume(struct device *dev)
+static int __maybe_unused ci_resume(struct device *dev)
 {
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
 	int ret;
@@ -1386,9 +1384,8 @@ static int ci_resume(struct device *dev)
 
 	return ret;
 }
-#endif /* CONFIG_PM_SLEEP */
 
-static int ci_runtime_suspend(struct device *dev)
+static int __maybe_unused ci_runtime_suspend(struct device *dev)
 {
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
 
@@ -1408,13 +1405,12 @@ static int ci_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int ci_runtime_resume(struct device *dev)
+static int __maybe_unused ci_runtime_resume(struct device *dev)
 {
 	return ci_controller_resume(dev);
 }
 
-#endif /* CONFIG_PM */
-static const struct dev_pm_ops ci_pm_ops = {
+static const struct dev_pm_ops __maybe_unused ci_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
 	SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
 };
@@ -1424,7 +1420,7 @@ static struct platform_driver ci_hdrc_driver = {
 	.remove	= ci_hdrc_remove,
 	.driver	= {
 		.name	= "ci_hdrc",
-		.pm	= &ci_pm_ops,
+		.pm	= pm_ptr(&ci_pm_ops),
 		.dev_groups = ci_groups,
 	},
 };
-- 
2.28.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-09-03 11:38 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-03 11:25 [PATCH 00/20] usb: Use new pm_ptr() macro Paul Cercueil
2020-09-03 11:25 ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 01/20] usb/host: ohci-platform: Use " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 15:34   ` Alan Stern
2020-09-03 11:25 ` [PATCH 02/20] usb/host: ehci-spear: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 03/20] usb/host: ehci-npcm7xx: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 04/20] usb/host: ehci-platform: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 15:47   ` Alan Stern
2020-09-03 11:25 ` [PATCH 05/20] usb/cdns3: core: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` Paul Cercueil [this message]
2020-09-03 11:25   ` [PATCH 06/20] usb/chipidea: " Paul Cercueil
2020-09-05  0:02   ` Peter Chen
2020-09-05  0:02     ` Peter Chen
2020-09-05  0:02     ` Peter Chen
2020-09-03 11:25 ` [PATCH 07/20] usb/misc: usb3503: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 08/20] usb/misc: usb4604: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 09/20] usb/musb: am35x: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 10/20] usb/musb: da8xx: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 11/20] usb/musb: musb_dsps: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 12/20] usb/musb: ux500: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 13/20] usb/phy: am335x: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 14/20] usb/phy: mxs-usb: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-05  0:08   ` Peter Chen
2020-09-05  0:08     ` Peter Chen
2020-09-05  0:08     ` Peter Chen
2020-09-07  6:07   ` Felipe Balbi
2020-09-07  6:07     ` Felipe Balbi
2020-09-03 11:25 ` [PATCH 15/20] usb/gadget/udc: atmel: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 16/20] usb/gadget/udc: bdc: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 17/20] usb/gadget/udc: mv-u3d: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 18/20] usb/gadget/udc: pch: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 19/20] usb/gadget/udc: renesas: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil
2020-09-03 11:25 ` [PATCH 20/20] usb/gadget/udc: snps: " Paul Cercueil
2020-09-03 11:25   ` Paul Cercueil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200903112554.34263-7-paul@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=Peter.Chen@nxp.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=avifishman70@gmail.com \
    --cc=b-liu@ti.com \
    --cc=balbi@kernel.org \
    --cc=benjaminfair@google.com \
    --cc=cristian.birsan@microchip.com \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@prisktech.co.nz \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=openbmc@lists.ozlabs.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=tali.perry1@gmail.com \
    --cc=tmaimon77@gmail.com \
    --cc=venture@google.com \
    --cc=yuenn@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.