From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 2/3] arm64: dts: meson-axg: add MIPI DSI Nodes
Date: Mon, 7 Sep 2020 10:32:59 +0200 [thread overview]
Message-ID: <20200907083300.14412-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20200907083300.14412-1-narmstrong@baylibre.com>
This adds the nodes for :
- MIPI DSI+PCIe analog phy
- MIPI D-PHY
- Synopsys MIPI-DSI Transceiver
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 4a93e3fecd90..f1501b19f617 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
#include <dt-bindings/power/meson-axg-power.h>
+#include <dt-bindings/phy/phy.h>
/ {
compatible = "amlogic,meson-axg";
@@ -1111,6 +1112,8 @@
sysctrl: system-controller@0 {
compatible = "amlogic,meson-axg-hhi-sysctrl",
"simple-mfd", "syscon";
+ #address-cells = <2>;
+ #size-cells = <2>;
reg = <0 0 0 0x400>;
clkc: clock-controller {
@@ -1159,6 +1162,12 @@
<250000000>,
<0>; /* Do Nothing */
};
+
+ mipi_pcie_analog_dphy: phy {
+ compatible = "amlogic,axg-mipi-pcie-analog-phy";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
};
@@ -1171,6 +1180,19 @@
#mbox-cells = <1>;
};
+ mipi_dphy: phy@ff640000 {
+ compatible = "amlogic,axg-mipi-dphy";
+ reg = <0x0 0xff640000 0x0 0x100>;
+ clocks = <&clkc CLKID_MIPI_DSI_PHY>;
+ clock-names = "pclk";
+ resets = <&reset RESET_MIPI_PHY>;
+ reset-names = "phy";
+ phys = <&mipi_pcie_analog_dphy>;
+ phy-names = "analog";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
audio: bus@ff642000 {
compatible = "simple-bus";
reg = <0x0 0xff642000 0x0 0x2000>;
@@ -1618,6 +1640,10 @@
/* DPI output port */
dpi_port: port@2 {
reg = <2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&mipi_dsi_in>;
+ };
};
};
@@ -1647,6 +1673,40 @@
#reset-cells = <1>;
};
+ mipi_dsi: dsi@7000 {
+ compatible = "amlogic,meson-axg-dw-mipi-dsi";
+ reg = <0x0 0x6000 0x0 0x400>;
+ resets = <&reset RESET_MIPI_HOST>;
+ reset-names = "top";
+ clocks = <&clkc CLKID_MIPI_DSI_HOST>,
+ <&clkc CLKID_GP0_PLL>;
+ clock-names = "pclk", "px_clk";
+ phys = <&mipi_dphy>;
+ phy-names = "dphy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VPU VENC Input */
+ mipi_dsi_venc_port: port@0 {
+ reg = <0>;
+
+ mipi_dsi_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ /* DSI Output */
+ mipi_dsi_panel_port: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
gpio_intc: interrupt-controller@f080 {
compatible = "amlogic,meson-axg-gpio-intc",
"amlogic,meson-gpio-intc";
--
2.22.0
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 2/3] arm64: dts: meson-axg: add MIPI DSI Nodes
Date: Mon, 7 Sep 2020 10:32:59 +0200 [thread overview]
Message-ID: <20200907083300.14412-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20200907083300.14412-1-narmstrong@baylibre.com>
This adds the nodes for :
- MIPI DSI+PCIe analog phy
- MIPI D-PHY
- Synopsys MIPI-DSI Transceiver
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 4a93e3fecd90..f1501b19f617 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
#include <dt-bindings/power/meson-axg-power.h>
+#include <dt-bindings/phy/phy.h>
/ {
compatible = "amlogic,meson-axg";
@@ -1111,6 +1112,8 @@
sysctrl: system-controller@0 {
compatible = "amlogic,meson-axg-hhi-sysctrl",
"simple-mfd", "syscon";
+ #address-cells = <2>;
+ #size-cells = <2>;
reg = <0 0 0 0x400>;
clkc: clock-controller {
@@ -1159,6 +1162,12 @@
<250000000>,
<0>; /* Do Nothing */
};
+
+ mipi_pcie_analog_dphy: phy {
+ compatible = "amlogic,axg-mipi-pcie-analog-phy";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
};
@@ -1171,6 +1180,19 @@
#mbox-cells = <1>;
};
+ mipi_dphy: phy@ff640000 {
+ compatible = "amlogic,axg-mipi-dphy";
+ reg = <0x0 0xff640000 0x0 0x100>;
+ clocks = <&clkc CLKID_MIPI_DSI_PHY>;
+ clock-names = "pclk";
+ resets = <&reset RESET_MIPI_PHY>;
+ reset-names = "phy";
+ phys = <&mipi_pcie_analog_dphy>;
+ phy-names = "analog";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
audio: bus@ff642000 {
compatible = "simple-bus";
reg = <0x0 0xff642000 0x0 0x2000>;
@@ -1618,6 +1640,10 @@
/* DPI output port */
dpi_port: port@2 {
reg = <2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&mipi_dsi_in>;
+ };
};
};
@@ -1647,6 +1673,40 @@
#reset-cells = <1>;
};
+ mipi_dsi: dsi@7000 {
+ compatible = "amlogic,meson-axg-dw-mipi-dsi";
+ reg = <0x0 0x6000 0x0 0x400>;
+ resets = <&reset RESET_MIPI_HOST>;
+ reset-names = "top";
+ clocks = <&clkc CLKID_MIPI_DSI_HOST>,
+ <&clkc CLKID_GP0_PLL>;
+ clock-names = "pclk", "px_clk";
+ phys = <&mipi_dphy>;
+ phy-names = "dphy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VPU VENC Input */
+ mipi_dsi_venc_port: port@0 {
+ reg = <0>;
+
+ mipi_dsi_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ /* DSI Output */
+ mipi_dsi_panel_port: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
gpio_intc: interrupt-controller@f080 {
compatible = "amlogic,meson-axg-gpio-intc",
"amlogic,meson-gpio-intc";
--
2.22.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 2/3] arm64: dts: meson-axg: add MIPI DSI Nodes
Date: Mon, 7 Sep 2020 10:32:59 +0200 [thread overview]
Message-ID: <20200907083300.14412-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20200907083300.14412-1-narmstrong@baylibre.com>
This adds the nodes for :
- MIPI DSI+PCIe analog phy
- MIPI D-PHY
- Synopsys MIPI-DSI Transceiver
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 60 ++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 4a93e3fecd90..f1501b19f617 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -13,6 +13,7 @@
#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
#include <dt-bindings/power/meson-axg-power.h>
+#include <dt-bindings/phy/phy.h>
/ {
compatible = "amlogic,meson-axg";
@@ -1111,6 +1112,8 @@
sysctrl: system-controller@0 {
compatible = "amlogic,meson-axg-hhi-sysctrl",
"simple-mfd", "syscon";
+ #address-cells = <2>;
+ #size-cells = <2>;
reg = <0 0 0 0x400>;
clkc: clock-controller {
@@ -1159,6 +1162,12 @@
<250000000>,
<0>; /* Do Nothing */
};
+
+ mipi_pcie_analog_dphy: phy {
+ compatible = "amlogic,axg-mipi-pcie-analog-phy";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
};
@@ -1171,6 +1180,19 @@
#mbox-cells = <1>;
};
+ mipi_dphy: phy@ff640000 {
+ compatible = "amlogic,axg-mipi-dphy";
+ reg = <0x0 0xff640000 0x0 0x100>;
+ clocks = <&clkc CLKID_MIPI_DSI_PHY>;
+ clock-names = "pclk";
+ resets = <&reset RESET_MIPI_PHY>;
+ reset-names = "phy";
+ phys = <&mipi_pcie_analog_dphy>;
+ phy-names = "analog";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
audio: bus@ff642000 {
compatible = "simple-bus";
reg = <0x0 0xff642000 0x0 0x2000>;
@@ -1618,6 +1640,10 @@
/* DPI output port */
dpi_port: port@2 {
reg = <2>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&mipi_dsi_in>;
+ };
};
};
@@ -1647,6 +1673,40 @@
#reset-cells = <1>;
};
+ mipi_dsi: dsi@7000 {
+ compatible = "amlogic,meson-axg-dw-mipi-dsi";
+ reg = <0x0 0x6000 0x0 0x400>;
+ resets = <&reset RESET_MIPI_HOST>;
+ reset-names = "top";
+ clocks = <&clkc CLKID_MIPI_DSI_HOST>,
+ <&clkc CLKID_GP0_PLL>;
+ clock-names = "pclk", "px_clk";
+ phys = <&mipi_dphy>;
+ phy-names = "dphy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VPU VENC Input */
+ mipi_dsi_venc_port: port@0 {
+ reg = <0>;
+
+ mipi_dsi_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ /* DSI Output */
+ mipi_dsi_panel_port: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
gpio_intc: interrupt-controller@f080 {
compatible = "amlogic,meson-axg-gpio-intc",
"amlogic,meson-gpio-intc";
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2020-09-07 8:33 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-07 8:32 [PATCH 0/3] arm64: dts: meson-axg-s400: add support for MIPI-DSI Panel Neil Armstrong
2020-09-07 8:32 ` Neil Armstrong
2020-09-07 8:32 ` Neil Armstrong
2020-09-07 8:32 ` [PATCH 1/3] arm64: dts: meson-axg: add VPU and PWRC nodes Neil Armstrong
2020-09-07 8:32 ` Neil Armstrong
2020-09-07 8:32 ` Neil Armstrong
2020-09-07 16:17 ` kernel test robot
2020-09-08 21:00 ` kernel test robot
2020-09-15 19:50 ` Martin Blumenstingl
2020-09-15 19:50 ` Martin Blumenstingl
2020-09-15 19:50 ` Martin Blumenstingl
2020-09-16 7:12 ` Neil Armstrong
2020-09-16 7:12 ` Neil Armstrong
2020-09-16 7:12 ` Neil Armstrong
2020-09-07 8:32 ` Neil Armstrong [this message]
2020-09-07 8:32 ` [PATCH 2/3] arm64: dts: meson-axg: add MIPI DSI Nodes Neil Armstrong
2020-09-07 8:32 ` Neil Armstrong
2020-09-07 8:33 ` [PATCH 3/3] arm64: dts: meson-axg-s400: add MIPI DSI panel nodes Neil Armstrong
2020-09-07 8:33 ` Neil Armstrong
2020-09-07 8:33 ` Neil Armstrong
2020-11-20 15:34 ` [PATCH 0/3] arm64: dts: meson-axg-s400: add support for MIPI-DSI Panel Neil Armstrong
2020-11-20 15:34 ` Neil Armstrong
2020-11-20 15:34 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200907083300.14412-3-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.