From: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> To: Rob Herring <robh+dt@kernel.org>, Wim Van Sebroeck <wim@linux-watchdog.org>, Guenter Roeck <linux@roeck-us.net> Cc: punit1.agrawal@toshiba.co.jp, yuji2.ishikawa@toshiba.co.jp, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-watchdog@vger.kernel.org, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Subject: [PATCH v3 0/2] Add WDT driver for Toshiba Visconti ARM SoC Date: Sun, 20 Sep 2020 14:18:05 +0900 [thread overview] Message-ID: <20200920051807.288034-1-nobuhiro1.iwamatsu@toshiba.co.jp> (raw) Hi, This is the PWM driver for Toshiba's ARM SoC, Visconti[0]. This has not yet been included in Linux kernel, but patches have been posted [1] and some patches have been applied [2]. Since this is a SoC driver, this cannot work by itself, but I have confirmed that it works with the patch series sent as [1] with DT setting. Best regards, Nobuhiro [0]: https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-recognition-processors-visconti.html [1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2020-September/599678.html [2]: http://lists.infradead.org/pipermail/linux-arm-kernel/2020-September/600578.html watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device v2 - > v3: - no update v1 - > v2: - no update watchdog: Add Toshiba Visconti watchdog driver v1 - > v3: - Fix unnecessary split lines - Fix negative value check and handling for visconti_wdt_get_timeleft() v1 - > v2: - Sort incclude alphabetically. - Add negative value check and handling for visconti_wdt_get_timeleft() - Use dev_err_probe() with devm_clk_get() Nobuhiro Iwamatsu (2): watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device watchdog: Add Toshiba Visconti watchdog driver .../watchdog/toshiba,visconti-wdt.yaml | 49 +++++ drivers/watchdog/Kconfig | 8 + drivers/watchdog/Makefile | 1 + drivers/watchdog/visconti_wdt.c | 191 ++++++++++++++++++ 4 files changed, 249 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml create mode 100644 drivers/watchdog/visconti_wdt.c -- 2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> To: Rob Herring <robh+dt@kernel.org>, Wim Van Sebroeck <wim@linux-watchdog.org>, Guenter Roeck <linux@roeck-us.net> Cc: devicetree@vger.kernel.org, punit1.agrawal@toshiba.co.jp, linux-watchdog@vger.kernel.org, Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>, yuji2.ishikawa@toshiba.co.jp, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 0/2] Add WDT driver for Toshiba Visconti ARM SoC Date: Sun, 20 Sep 2020 14:18:05 +0900 [thread overview] Message-ID: <20200920051807.288034-1-nobuhiro1.iwamatsu@toshiba.co.jp> (raw) Hi, This is the PWM driver for Toshiba's ARM SoC, Visconti[0]. This has not yet been included in Linux kernel, but patches have been posted [1] and some patches have been applied [2]. Since this is a SoC driver, this cannot work by itself, but I have confirmed that it works with the patch series sent as [1] with DT setting. Best regards, Nobuhiro [0]: https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-recognition-processors-visconti.html [1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2020-September/599678.html [2]: http://lists.infradead.org/pipermail/linux-arm-kernel/2020-September/600578.html watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device v2 - > v3: - no update v1 - > v2: - no update watchdog: Add Toshiba Visconti watchdog driver v1 - > v3: - Fix unnecessary split lines - Fix negative value check and handling for visconti_wdt_get_timeleft() v1 - > v2: - Sort incclude alphabetically. - Add negative value check and handling for visconti_wdt_get_timeleft() - Use dev_err_probe() with devm_clk_get() Nobuhiro Iwamatsu (2): watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device watchdog: Add Toshiba Visconti watchdog driver .../watchdog/toshiba,visconti-wdt.yaml | 49 +++++ drivers/watchdog/Kconfig | 8 + drivers/watchdog/Makefile | 1 + drivers/watchdog/visconti_wdt.c | 191 ++++++++++++++++++ 4 files changed, 249 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml create mode 100644 drivers/watchdog/visconti_wdt.c -- 2.27.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-09-20 5:18 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-20 5:18 Nobuhiro Iwamatsu [this message] 2020-09-20 5:18 ` [PATCH v3 0/2] Add WDT driver for Toshiba Visconti ARM SoC Nobuhiro Iwamatsu 2020-09-20 5:18 ` [PATCH v3 1/2] watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device Nobuhiro Iwamatsu 2020-09-20 5:18 ` Nobuhiro Iwamatsu 2020-09-21 7:27 ` Punit Agrawal 2020-09-21 7:27 ` Punit Agrawal 2020-09-21 8:43 ` Nobuhiro Iwamatsu 2020-09-21 8:43 ` Nobuhiro Iwamatsu 2020-09-20 5:18 ` [PATCH v3 2/2] watchdog: Add Toshiba Visconti watchdog driver Nobuhiro Iwamatsu 2020-09-20 5:18 ` Nobuhiro Iwamatsu 2020-09-21 7:25 ` Punit Agrawal 2020-09-21 7:25 ` Punit Agrawal 2020-09-21 8:46 ` Nobuhiro Iwamatsu 2020-09-21 8:46 ` Nobuhiro Iwamatsu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200920051807.288034-1-nobuhiro1.iwamatsu@toshiba.co.jp \ --to=nobuhiro1.iwamatsu@toshiba.co.jp \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-watchdog@vger.kernel.org \ --cc=linux@roeck-us.net \ --cc=punit1.agrawal@toshiba.co.jp \ --cc=robh+dt@kernel.org \ --cc=wim@linux-watchdog.org \ --cc=yuji2.ishikawa@toshiba.co.jp \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.