[PATCH 12/12] ARM: dts: imx7s-warp: correct vendor in compatible to Element14

From: Krzysztof Kozlowski <krzk@kernel.org>
To: "Rob Herring" <robh+dt@kernel.org>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	"Krzysztof Kozlowski" <krzk@kernel.org>,
	"Anson Huang" <Anson.Huang@nxp.com>,
	"Andreas Kemnade" <andreas@kemnade.info>,
	"Stefan Riedmueller" <s.riedmueller@phytec.de>,
	"Robert Jones" <rjones@gateworks.com>,
	"Sébastien Szymanski" <sebastien.szymanski@armadeus.com>,
	"Li Yang" <leoyang.li@nxp.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 12/12] ARM: dts: imx7s-warp: correct vendor in compatible to Element14
Date: Thu,  1 Oct 2020 19:07:59 +0200	[thread overview]
Message-ID: <20201001170759.9592-13-krzk@kernel.org> (raw)
In-Reply-To: <20201001170759.9592-1-krzk@kernel.org>

The WaRP7 board (Wearable Development Platform) was apparently made by
Element14, not by "Warp".  Correct the  vendor in compatible to reflect
this.  The compatibles were not documented in the bindings before.

Link: https://www.element14.com/community/docs/DOC-79058
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 arch/arm/boot/dts/imx7s-warp.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index d6b4888fa686..569bbd84e371 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -10,8 +10,8 @@
 #include "imx7s.dtsi"
 
 / {
-	model = "Warp i.MX7 Board";
-	compatible = "warp,imx7s-warp", "fsl,imx7s";
+	model = "Element14 Warp i.MX7 Board";
+	compatible = "element14,imx7s-warp", "fsl,imx7s";
 
 	memory@80000000 {
 		device_type = "memory";
-- 
2.17.1

