From: Faiz Abbas <faiz_abbas@ti.com>
To: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Cc: <will@kernel.org>, <robh+dt@kernel.org>, <nm@ti.com>,
<t-kristo@ti.com>, <faiz_abbas@ti.com>
Subject: [PATCH 4/8] arm64: dts: ti: k3-j721e-main: Add output tap delay values
Date: Fri, 2 Oct 2020 00:35:37 +0530 [thread overview]
Message-ID: <20201001190541.6364-5-faiz_abbas@ti.com> (raw)
In-Reply-To: <20201001190541.6364-1-faiz_abbas@ti.com>
Add output tap delay values as given in the latest Data Manual[1].
[1] https://www.ti.com/lit/gpn/tda4vm
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index e2a96b2c423c..630b195cbc8a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1081,7 +1081,11 @@
bus-width = <8>;
mmc-hs400-1_8v;
mmc-ddr-1_8v;
- ti,otap-del-sel = <0x2>;
+ ti,otap-del-sel-legacy = <0xf>;
+ ti,otap-del-sel-mmc-hs = <0xf>;
+ ti,otap-del-sel-ddr52 = <0x5>;
+ ti,otap-del-sel-hs200 = <0x6>;
+ ti,otap-del-sel-hs400 = <0x0>;
ti,trm-icp = <0x8>;
ti,strobe-sel = <0x77>;
dma-coherent;
@@ -1096,7 +1100,12 @@
clocks = <&k3_clks 92 0>, <&k3_clks 92 5>;
assigned-clocks = <&k3_clks 92 0>;
assigned-clock-parents = <&k3_clks 92 1>;
- ti,otap-del-sel = <0x2>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-sd-hs = <0xf>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
+ ti,otap-del-sel-sdr50 = <0xc>;
+ ti,otap-del-sel-ddr50 = <0xc>;
ti,trm-icp = <0x8>;
ti,clkbuf-sel = <0x7>;
dma-coherent;
@@ -1112,7 +1121,12 @@
clocks = <&k3_clks 93 0>, <&k3_clks 93 5>;
assigned-clocks = <&k3_clks 93 0>;
assigned-clock-parents = <&k3_clks 93 1>;
- ti,otap-del-sel = <0x2>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-sd-hs = <0xf>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
+ ti,otap-del-sel-sdr50 = <0xc>;
+ ti,otap-del-sel-ddr50 = <0xc>;
ti,trm-icp = <0x8>;
ti,clkbuf-sel = <0x7>;
dma-coherent;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Faiz Abbas <faiz_abbas@ti.com>
To: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Cc: nm@ti.com, t-kristo@ti.com, robh+dt@kernel.org, will@kernel.org,
faiz_abbas@ti.com
Subject: [PATCH 4/8] arm64: dts: ti: k3-j721e-main: Add output tap delay values
Date: Fri, 2 Oct 2020 00:35:37 +0530 [thread overview]
Message-ID: <20201001190541.6364-5-faiz_abbas@ti.com> (raw)
In-Reply-To: <20201001190541.6364-1-faiz_abbas@ti.com>
Add output tap delay values as given in the latest Data Manual[1].
[1] https://www.ti.com/lit/gpn/tda4vm
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index e2a96b2c423c..630b195cbc8a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1081,7 +1081,11 @@
bus-width = <8>;
mmc-hs400-1_8v;
mmc-ddr-1_8v;
- ti,otap-del-sel = <0x2>;
+ ti,otap-del-sel-legacy = <0xf>;
+ ti,otap-del-sel-mmc-hs = <0xf>;
+ ti,otap-del-sel-ddr52 = <0x5>;
+ ti,otap-del-sel-hs200 = <0x6>;
+ ti,otap-del-sel-hs400 = <0x0>;
ti,trm-icp = <0x8>;
ti,strobe-sel = <0x77>;
dma-coherent;
@@ -1096,7 +1100,12 @@
clocks = <&k3_clks 92 0>, <&k3_clks 92 5>;
assigned-clocks = <&k3_clks 92 0>;
assigned-clock-parents = <&k3_clks 92 1>;
- ti,otap-del-sel = <0x2>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-sd-hs = <0xf>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
+ ti,otap-del-sel-sdr50 = <0xc>;
+ ti,otap-del-sel-ddr50 = <0xc>;
ti,trm-icp = <0x8>;
ti,clkbuf-sel = <0x7>;
dma-coherent;
@@ -1112,7 +1121,12 @@
clocks = <&k3_clks 93 0>, <&k3_clks 93 5>;
assigned-clocks = <&k3_clks 93 0>;
assigned-clock-parents = <&k3_clks 93 1>;
- ti,otap-del-sel = <0x2>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-sd-hs = <0xf>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
+ ti,otap-del-sel-sdr50 = <0xc>;
+ ti,otap-del-sel-ddr50 = <0xc>;
ti,trm-icp = <0x8>;
ti,clkbuf-sel = <0x7>;
dma-coherent;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-10-01 19:06 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-01 19:05 [PATCH 0/8] Add support for UHS modes in TI's J721e and J7200 boards Faiz Abbas
2020-10-01 19:05 ` Faiz Abbas
2020-10-01 19:05 ` [PATCH 1/8] arm64: dts: ti: k3-j7200-main: Add gpio nodes in main domain Faiz Abbas
2020-10-01 19:05 ` Faiz Abbas
2020-10-01 19:05 ` [PATCH 2/8] arm64: dts: ti: k3-j7200: Add gpio nodes in wakeup domain Faiz Abbas
2020-10-01 19:05 ` Faiz Abbas
2020-10-01 19:05 ` [PATCH 3/8] arm64: dts: ti: k3-j7200-common-proc-board: Disable unused gpio modules Faiz Abbas
2020-10-01 19:05 ` Faiz Abbas
2020-10-01 19:05 ` Faiz Abbas [this message]
2020-10-01 19:05 ` [PATCH 4/8] arm64: dts: ti: k3-j721e-main: Add output tap delay values Faiz Abbas
2020-10-01 19:05 ` [PATCH 5/8] arm64: dts: ti: k3-j721e-common-proc-board: Add support SD card UHS modes Faiz Abbas
2020-10-01 19:05 ` Faiz Abbas
2020-10-01 19:05 ` [PATCH 6/8] arm64: dts: ti: k3-j7200-common-proc-board: " Faiz Abbas
2020-10-01 19:05 ` Faiz Abbas
2020-10-01 19:13 ` [PATCH 0/8] Add support for UHS modes in TI's J721e and J7200 boards Nishanth Menon
2020-10-01 19:13 ` Nishanth Menon
2020-10-02 4:44 ` Faiz Abbas
2020-10-02 4:44 ` Faiz Abbas
2020-10-02 12:49 ` Nishanth Menon
2020-10-02 12:49 ` Nishanth Menon
2020-10-02 16:09 ` Faiz Abbas
2020-10-02 16:09 ` Faiz Abbas
2020-10-26 14:55 ` Nishanth Menon
2020-10-26 14:55 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201001190541.6364-5-faiz_abbas@ti.com \
--to=faiz_abbas@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.