From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Sylwester Nawrocki <snawrocki@kernel.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>
Subject: [PATCH 04/12] ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards
Date: Mon, 26 Oct 2020 19:15:20 +0100 [thread overview]
Message-ID: <20201026181528.163143-5-krzk@kernel.org> (raw)
In-Reply-To: <20201026181528.163143-1-krzk@kernel.org>
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 8 ++++----
arch/arm/boot/dts/exynos4412-itop-elite.dts | 2 +-
.../boot/dts/exynos4412-itop-scp-core.dtsi | 2 +-
arch/arm/boot/dts/exynos4412-midas.dtsi | 12 +++++------
arch/arm/boot/dts/exynos4412-n710x.dts | 2 +-
.../boot/dts/exynos4412-odroid-common.dtsi | 8 ++++----
arch/arm/boot/dts/exynos4412-odroidx.dts | 4 ++--
arch/arm/boot/dts/exynos4412-origen.dts | 14 ++++++-------
arch/arm/boot/dts/exynos4412-smdk4412.dts | 20 +++++++++----------
9 files changed, 36 insertions(+), 36 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index 89ed81fb348d..db91678f5648 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -15,7 +15,7 @@ aliases {
i2c10 = &i2c_cm36651;
};
- aat1290 {
+ led-controller {
compatible = "skyworks,aat1290";
flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
@@ -60,7 +60,7 @@ i2c_ak8975: i2c-gpio-0 {
#size-cells = <0>;
status = "okay";
- ak8975@c {
+ magnetometer@c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
@@ -75,7 +75,7 @@ i2c_cm36651: i2c-gpio-2 {
#address-cells = <1>;
#size-cells = <0>;
- cm36651@18 {
+ sensor@18 {
compatible = "capella,cm36651";
reg = <0x18>;
interrupt-parent = <&gpx0>;
@@ -133,7 +133,7 @@ timing-0 {
};
&i2c_3 {
- mms114-touchscreen@48 {
+ touchscreen@48 {
compatible = "melfas,mms114";
reg = <0x48>;
interrupt-parent = <&gpm2>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
index f6d0a5f5d339..3063e44fcbcc 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -175,7 +175,7 @@ &i2c_4 {
pinctrl-names = "default";
status = "okay";
- codec: wm8960@1a {
+ codec: codec@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
clocks = <&pmu_system_controller 0>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index dfceb155b3a7..4583d342af39 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -134,7 +134,7 @@ &i2c_1 {
pinctrl-names = "default";
status = "okay";
- s5m8767: s5m8767-pmic@66 {
+ s5m8767: pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 7e7c243ff196..52a4f6e6c7f2 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -220,7 +220,7 @@ i2c_max77693_fuel: i2c-gpio-3 {
#size-cells = <0>;
status = "okay";
- max77693-fuel-gauge@36 {
+ fuel-gauge@36 {
compatible = "maxim,max17047";
interrupt-parent = <&gpx2>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
@@ -550,7 +550,7 @@ &i2c_0 {
pinctrl-names = "default";
status = "okay";
- s5c73m3: s5c73m3@3c {
+ s5c73m3: sensor@3c {
compatible = "samsung,s5c73m3";
reg = <0x3c>;
xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
@@ -577,7 +577,7 @@ &i2c1_isp {
pinctrl-0 = <&fimc_is_i2c1>;
pinctrl-names = "default";
- s5k6a3@10 {
+ sensor@10 {
compatible = "samsung,s5k6a3";
reg = <0x10>;
svdda-supply = <&cam_io_reg>;
@@ -616,7 +616,7 @@ &i2c_4 {
pinctrl-names = "default";
status = "okay";
- wm1811: wm1811@1a {
+ wm1811: codec@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
clocks = <&pmu_system_controller 0>,
@@ -665,7 +665,7 @@ &i2c_7 {
pinctrl-names = "default";
status = "okay";
- max77686: max77686_pmic@9 {
+ max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx0>;
interrupts = <7 IRQ_TYPE_NONE>;
@@ -1407,7 +1407,7 @@ &spi_1 {
cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
status = "okay";
- s5c73m3_spi: s5c73m3@0 {
+ s5c73m3_spi: sensor@0 {
compatible = "samsung,s5c73m3";
spi-max-frequency = <50000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
index a47b7f35fc80..c49dbb7847b8 100644
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -45,7 +45,7 @@ &i2c_3 {
pinctrl-names = "default";
status = "okay";
- mms152-touchscreen@48 {
+ touchscreen@48 {
compatible = "melfas,mms152";
reg = <0x48>;
interrupt-parent = <&gpm2>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index c3b6e6d367ab..3dcd7f7f10f3 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -27,7 +27,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_power_key>;
- power_key {
+ power-key {
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
@@ -171,7 +171,7 @@ cooling_map1: map1 {
};
&pinctrl_1 {
- gpio_power_key: power_key {
+ gpio_power_key: power-key {
samsung,pins = "gpx1-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
@@ -266,7 +266,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <400000>;
status = "okay";
- usb3503: usb3503@8 {
+ usb3503: usb-hub@8 {
compatible = "smsc,usb3503";
reg = <0x08>;
@@ -492,7 +492,7 @@ buck8_reg: BUCK8 {
&i2c_1 {
status = "okay";
- max98090: max98090@10 {
+ max98090: codec@10 {
compatible = "maxim,max98090";
reg = <0x10>;
interrupt-parent = <&gpx0>;
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 68fe88074d1d..46381e9097f4 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -36,7 +36,7 @@ led2 {
};
};
- regulator_p3v3 {
+ regulator-1 {
compatible = "regulator-fixed";
regulator-name = "p3v3_en";
regulator-min-microvolt = <3300000>;
@@ -81,7 +81,7 @@ &mshc_0 {
};
&pinctrl_1 {
- gpio_home_key: home_key {
+ gpio_home_key: home-key {
samsung,pins = "gpx2-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index c2e793b69e7d..e1f6de53e20e 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -116,7 +116,7 @@ &i2c_0 {
pinctrl-names = "default";
status = "okay";
- s5m8767_pmic@66 {
+ pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
@@ -453,37 +453,37 @@ &keypad {
pinctrl-names = "default";
status = "okay";
- key_home {
+ key-home {
keypad,row = <0>;
keypad,column = <0>;
linux,code = <KEY_HOME>;
};
- key_down {
+ key-down {
keypad,row = <0>;
keypad,column = <1>;
linux,code = <KEY_DOWN>;
};
- key_up {
+ key-up {
keypad,row = <1>;
keypad,column = <0>;
linux,code = <KEY_UP>;
};
- key_menu {
+ key-menu {
keypad,row = <1>;
keypad,column = <1>;
linux,code = <KEY_MENU>;
};
- key_back {
+ key-back {
keypad,row = <2>;
keypad,column = <0>;
linux,code = <KEY_BACK>;
};
- key_enter {
+ key-enter {
keypad,row = <2>;
keypad,column = <1>;
linux,code = <KEY_ENTER>;
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index 49971203a8aa..cc99b955af0c 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -71,61 +71,61 @@ &keypad {
pinctrl-names = "default";
status = "okay";
- key_1 {
+ key-1 {
keypad,row = <1>;
keypad,column = <3>;
linux,code = <2>;
};
- key_2 {
+ key-2 {
keypad,row = <1>;
keypad,column = <4>;
linux,code = <3>;
};
- key_3 {
+ key-3 {
keypad,row = <1>;
keypad,column = <5>;
linux,code = <4>;
};
- key_4 {
+ key-4 {
keypad,row = <1>;
keypad,column = <6>;
linux,code = <5>;
};
- key_5 {
+ key-5 {
keypad,row = <1>;
keypad,column = <7>;
linux,code = <6>;
};
- key_A {
+ key-A {
keypad,row = <2>;
keypad,column = <6>;
linux,code = <30>;
};
- key_B {
+ key-B {
keypad,row = <2>;
keypad,column = <7>;
linux,code = <48>;
};
- key_C {
+ key-C {
keypad,row = <0>;
keypad,column = <5>;
linux,code = <46>;
};
- key_D {
+ key-D {
keypad,row = <2>;
keypad,column = <5>;
linux,code = <32>;
};
- key_E {
+ key-E {
keypad,row = <0>;
keypad,column = <7>;
linux,code = <18>;
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Sylwester Nawrocki <snawrocki@kernel.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
Alim Akhtar <alim.akhtar@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH 04/12] ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards
Date: Mon, 26 Oct 2020 19:15:20 +0100 [thread overview]
Message-ID: <20201026181528.163143-5-krzk@kernel.org> (raw)
In-Reply-To: <20201026181528.163143-1-krzk@kernel.org>
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.
No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 8 ++++----
arch/arm/boot/dts/exynos4412-itop-elite.dts | 2 +-
.../boot/dts/exynos4412-itop-scp-core.dtsi | 2 +-
arch/arm/boot/dts/exynos4412-midas.dtsi | 12 +++++------
arch/arm/boot/dts/exynos4412-n710x.dts | 2 +-
.../boot/dts/exynos4412-odroid-common.dtsi | 8 ++++----
arch/arm/boot/dts/exynos4412-odroidx.dts | 4 ++--
arch/arm/boot/dts/exynos4412-origen.dts | 14 ++++++-------
arch/arm/boot/dts/exynos4412-smdk4412.dts | 20 +++++++++----------
9 files changed, 36 insertions(+), 36 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index 89ed81fb348d..db91678f5648 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -15,7 +15,7 @@ aliases {
i2c10 = &i2c_cm36651;
};
- aat1290 {
+ led-controller {
compatible = "skyworks,aat1290";
flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
@@ -60,7 +60,7 @@ i2c_ak8975: i2c-gpio-0 {
#size-cells = <0>;
status = "okay";
- ak8975@c {
+ magnetometer@c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
@@ -75,7 +75,7 @@ i2c_cm36651: i2c-gpio-2 {
#address-cells = <1>;
#size-cells = <0>;
- cm36651@18 {
+ sensor@18 {
compatible = "capella,cm36651";
reg = <0x18>;
interrupt-parent = <&gpx0>;
@@ -133,7 +133,7 @@ timing-0 {
};
&i2c_3 {
- mms114-touchscreen@48 {
+ touchscreen@48 {
compatible = "melfas,mms114";
reg = <0x48>;
interrupt-parent = <&gpm2>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
index f6d0a5f5d339..3063e44fcbcc 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -175,7 +175,7 @@ &i2c_4 {
pinctrl-names = "default";
status = "okay";
- codec: wm8960@1a {
+ codec: codec@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
clocks = <&pmu_system_controller 0>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index dfceb155b3a7..4583d342af39 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -134,7 +134,7 @@ &i2c_1 {
pinctrl-names = "default";
status = "okay";
- s5m8767: s5m8767-pmic@66 {
+ s5m8767: pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 7e7c243ff196..52a4f6e6c7f2 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -220,7 +220,7 @@ i2c_max77693_fuel: i2c-gpio-3 {
#size-cells = <0>;
status = "okay";
- max77693-fuel-gauge@36 {
+ fuel-gauge@36 {
compatible = "maxim,max17047";
interrupt-parent = <&gpx2>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
@@ -550,7 +550,7 @@ &i2c_0 {
pinctrl-names = "default";
status = "okay";
- s5c73m3: s5c73m3@3c {
+ s5c73m3: sensor@3c {
compatible = "samsung,s5c73m3";
reg = <0x3c>;
xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
@@ -577,7 +577,7 @@ &i2c1_isp {
pinctrl-0 = <&fimc_is_i2c1>;
pinctrl-names = "default";
- s5k6a3@10 {
+ sensor@10 {
compatible = "samsung,s5k6a3";
reg = <0x10>;
svdda-supply = <&cam_io_reg>;
@@ -616,7 +616,7 @@ &i2c_4 {
pinctrl-names = "default";
status = "okay";
- wm1811: wm1811@1a {
+ wm1811: codec@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
clocks = <&pmu_system_controller 0>,
@@ -665,7 +665,7 @@ &i2c_7 {
pinctrl-names = "default";
status = "okay";
- max77686: max77686_pmic@9 {
+ max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx0>;
interrupts = <7 IRQ_TYPE_NONE>;
@@ -1407,7 +1407,7 @@ &spi_1 {
cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
status = "okay";
- s5c73m3_spi: s5c73m3@0 {
+ s5c73m3_spi: sensor@0 {
compatible = "samsung,s5c73m3";
spi-max-frequency = <50000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
index a47b7f35fc80..c49dbb7847b8 100644
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -45,7 +45,7 @@ &i2c_3 {
pinctrl-names = "default";
status = "okay";
- mms152-touchscreen@48 {
+ touchscreen@48 {
compatible = "melfas,mms152";
reg = <0x48>;
interrupt-parent = <&gpm2>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index c3b6e6d367ab..3dcd7f7f10f3 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -27,7 +27,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_power_key>;
- power_key {
+ power-key {
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
@@ -171,7 +171,7 @@ cooling_map1: map1 {
};
&pinctrl_1 {
- gpio_power_key: power_key {
+ gpio_power_key: power-key {
samsung,pins = "gpx1-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
@@ -266,7 +266,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <400000>;
status = "okay";
- usb3503: usb3503@8 {
+ usb3503: usb-hub@8 {
compatible = "smsc,usb3503";
reg = <0x08>;
@@ -492,7 +492,7 @@ buck8_reg: BUCK8 {
&i2c_1 {
status = "okay";
- max98090: max98090@10 {
+ max98090: codec@10 {
compatible = "maxim,max98090";
reg = <0x10>;
interrupt-parent = <&gpx0>;
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 68fe88074d1d..46381e9097f4 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -36,7 +36,7 @@ led2 {
};
};
- regulator_p3v3 {
+ regulator-1 {
compatible = "regulator-fixed";
regulator-name = "p3v3_en";
regulator-min-microvolt = <3300000>;
@@ -81,7 +81,7 @@ &mshc_0 {
};
&pinctrl_1 {
- gpio_home_key: home_key {
+ gpio_home_key: home-key {
samsung,pins = "gpx2-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index c2e793b69e7d..e1f6de53e20e 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -116,7 +116,7 @@ &i2c_0 {
pinctrl-names = "default";
status = "okay";
- s5m8767_pmic@66 {
+ pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
@@ -453,37 +453,37 @@ &keypad {
pinctrl-names = "default";
status = "okay";
- key_home {
+ key-home {
keypad,row = <0>;
keypad,column = <0>;
linux,code = <KEY_HOME>;
};
- key_down {
+ key-down {
keypad,row = <0>;
keypad,column = <1>;
linux,code = <KEY_DOWN>;
};
- key_up {
+ key-up {
keypad,row = <1>;
keypad,column = <0>;
linux,code = <KEY_UP>;
};
- key_menu {
+ key-menu {
keypad,row = <1>;
keypad,column = <1>;
linux,code = <KEY_MENU>;
};
- key_back {
+ key-back {
keypad,row = <2>;
keypad,column = <0>;
linux,code = <KEY_BACK>;
};
- key_enter {
+ key-enter {
keypad,row = <2>;
keypad,column = <1>;
linux,code = <KEY_ENTER>;
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index 49971203a8aa..cc99b955af0c 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -71,61 +71,61 @@ &keypad {
pinctrl-names = "default";
status = "okay";
- key_1 {
+ key-1 {
keypad,row = <1>;
keypad,column = <3>;
linux,code = <2>;
};
- key_2 {
+ key-2 {
keypad,row = <1>;
keypad,column = <4>;
linux,code = <3>;
};
- key_3 {
+ key-3 {
keypad,row = <1>;
keypad,column = <5>;
linux,code = <4>;
};
- key_4 {
+ key-4 {
keypad,row = <1>;
keypad,column = <6>;
linux,code = <5>;
};
- key_5 {
+ key-5 {
keypad,row = <1>;
keypad,column = <7>;
linux,code = <6>;
};
- key_A {
+ key-A {
keypad,row = <2>;
keypad,column = <6>;
linux,code = <30>;
};
- key_B {
+ key-B {
keypad,row = <2>;
keypad,column = <7>;
linux,code = <48>;
};
- key_C {
+ key-C {
keypad,row = <0>;
keypad,column = <5>;
linux,code = <46>;
};
- key_D {
+ key-D {
keypad,row = <2>;
keypad,column = <5>;
linux,code = <32>;
};
- key_E {
+ key-E {
keypad,row = <0>;
keypad,column = <7>;
linux,code = <18>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-10-26 18:15 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-26 18:15 [PATCH 00/12] ARM: dts: samsung: minor node name cleanups Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 01/12] ARM: dts: exynos: adjust node names to DT spec in Exynos3250 boards Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 02/12] ARM: dts: exynos: adjust node names to DT spec in Exynos4210 boards Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 03/12] ARM: dts: exynos: override GPIO keys node by label in Exynos4412 Odroid family Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski [this message]
2020-10-26 18:15 ` [PATCH 04/12] ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards Krzysztof Kozlowski
2020-10-26 21:02 ` Marek Szyprowski
2020-10-26 21:02 ` Marek Szyprowski
2020-10-27 10:38 ` Krzysztof Kozlowski
2020-10-27 10:38 ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 05/12] ARM: dts: exynos: remove redundant status=okay " Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 06/12] ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boards Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 07/12] ARM: dts: exynos: adjust node names to DT spec in Odroid XU Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 08/12] ARM: dts: exynos: adjust node names to DT spec in Exynos542x boards Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski
2020-10-26 21:47 ` Marek Szyprowski
2020-10-26 21:47 ` Marek Szyprowski
2020-10-27 10:37 ` Krzysztof Kozlowski
2020-10-27 10:37 ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 09/12] ARM: dts: s5pv210: adjust node names to DT spec Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 10/12] arm64: dts: exynos: adjust node names to DT spec in Exynos5433 TM2 Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 11/12] arm64: dts: exynos: adjust node names to DT spec in Exynos7 Espresso Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski
2020-10-26 18:15 ` [PATCH 12/12] arm64: dts: exynos: remove redundant status=okay in Exynos5433 TM2 Krzysztof Kozlowski
2020-10-26 18:15 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201026181528.163143-5-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=alim.akhtar@samsung.com \
--cc=b.zolnierkie@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=robh+dt@kernel.org \
--cc=snawrocki@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.